Tender For Construction Of Lane From Csc Rajjni To Graveyard Ii) Constt. Lane By Way Of Tile Work From H/O Mohan Lal Upto Narsingh Temple At Jarai Iii) Constt. Of Drain With Culverts From Shop Of Swarn Dass To H/O Raj Kumar, Ashwani Kumar And Onwards Pyt
Tender Value
5.70 Lakhs
Estimated cost
Bid Submission
23 Oct 2024
0 days left
EMD
11400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagri → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction of Lane From Csc Rajjni To Graveyard Ii) Constt. Lane By Way Of Tile Work From H/O Mohan Lal Upto Narsingh Temple At Jarai Iii) Constt. Of Drain With Culverts From Shop Of Swarn Dass To H/O Raj Kumar, Ashwani Kumar And Onwards Pyt. Jarai Bloc
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: in all kinds of Soils. |
| 2 | Providing and Laying of River Bed Material (R.B.M)/ Nallah bed Material (N.B.M) including spreading, consolidation complete in all respect including Loading, unloading and carriage complete ( to be quoted by Contractor ) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Supply and supplyingof30% Boulders |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4: 8 (1 cement :4 coarse sand :8 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelMild steel and medium tensile steel bars |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for:Slab |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges |
| 12 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper mbedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 13 | Carriage ofSand for an Av. Lead of 7.0 km |
| 14 | Carriage ofAgg (20mm+40mm) for an av lead of 7.0km |
| 15 | Providing and fixing of CIB board as per approved shape and size as per the direction of of Engineer in charge. |
AI Tender Summary
Tender Timeline
Oct 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender