|
| 1 | FOR GROUP DISINFECTANTS |
| 2 | Alcohol Base Rapid Surface and Equipment Disinfectant each 100 gm containing: 2- Propanol IP 40 gm, 1- Propanol BP 22 gm with spray pump bottle (1 litre) |
| 3 | Alcohol Hand Rub1. Each 100g contains : Hydrogen Peroxide IP 0.125% v/v with Glycerol IP 1.45% v/v & Isopropyl Alcohol IP 75% v/v with additives.2. It should contain permitted moisturizing / conditioning agents. (500 ml) |
| 4 | Antiseptic solution Each 100 gm contains: Iodine IP 0.005% w/v, Ethanol IP 70% v/v, Glycerin IP 5.0% v/v, Propylene Glycol IP Q.S (500 ml) |
| 5 | Antiseptic spray Each 100 gm contains: Iodine IP 0.10% w/v, Ethanol IP 70% v/v, Glycerin IP Q.S (100 ml) |
| 6 | Enzyme Cleansing SolutionMixture of enzyme cleansing substances (1 litre) |
| 7 | Hard Surface DisinfectantMinimum 4% w/v benzalkonium chloride with or without additives (1 litre) |
| 8 | Heat Labile Equipments 0.55% Ortho-phthaladehyde with checking strips (5 litre) |
| 9 | High Lavel Chemical Sterilant for Surface & Environment with vapour technology, Hydrogen Peroxide 7.35% Peracitic Acid 0.23% (concentrated) in pack size of one liter, material compatability test report according to ISO21530:2004 With standards equivalent to following European Norms (EN): EN-17126:2018 (E) Sporicidal for medical area, EN-13727:2012 + A2:2015 (E) Bactericidal for medical area, EN-14476:2013+A2:2019 (E) Virucidal for medical area, EN-13624:2021 (E) Fungicidal & Yeasticidal for medical area, EN-14563:2008 (E) Mycobactericidal & Tuberculocidal for medical area |
| 10 | High Level Hospital Surface Disinfectant 5th Generation Quaternary Ammonium Compound with Active Ingredients per 100 ml should be minimum contain following :1. Octyl Decyl Dimethyl Ammonium Chloride 6.51% w/w2. Di Octyl Dimethyl AmmoniumChloride 2.60%w/w3. Di Decyl Dimethyl AmmoniumChloride 3.90%w/w4. Alkly Dimethyl Benzyl Ammonium Chloride 8.60%w/w5. Should be gas free and water miscible6. It should be user friendly, non corrosive, non toxic & non Hazardous. (1 litre) |
| 11 | PH- Neutral pre- Cleaner ConcentrateFor Heat Sensitive Instruments: Non ionic and Amphoteric Surfactants Solvelts, Complexing agentCorrosion inhibitors Antifoaming agents preservatives(500ml ) |
| 12 | Pre-Surgical patient skin prepration solutionChlorhexidine 2% soloution with or without alcohol (500 ml) |
| 13 | Skin Antiseptic with Spray each 100 gms contains: Isopropyl63.0 gm,Benzalkonium chloride 0.025 gm.(250ml) |
| 14 | Solution Alkaline gluteraldehyde 2.4% with ISS mix with checking strips (5 litre) |
| 15 | Solution Chloroxylenol 4.8% w/v + Terpinol 9.0% v/v + Alcohol abs 13.1% v/v in a solution form (5 litre) |
| 16 | Surgical Hand Wash / Scrub1. It Should Contain Chlorhexidine Gluconate Solution 20% v/v (Equivalent to Chlorhexidine Gluconate 4% w/v.)2. It should contain permitted emollient and moisturisers. (500ml) |
| 17 | Surgical Instrument Disinfectant, N, n bis(3-aminopropyl) dodecylamine - 14% w/w, Didecyl methyl polyxyethyl ammonium propionate - 12.6% w/w in pack size of one liter, material compatability test report according to ISO21530:2004 With standards equivalent to following European Norms (EN): EN-17126:2018 (E) Sporicidal for medical area, EN-14563:2008 (E) Mycobactericidal & Tuberculocidal, EN-14561:2006 (E) Bactericidal, EN-14562:2006 (E) Fungicidal & Yeasticidal, EN-17111:2008 (E) Virucidal |
| 18 | Wound and Mucous Membrane Anticeptic Solution containing: Octenidine Dihydrochloride 0.1% w/v, 2- Phenoxyethanol 2.0% w/v (500 ml) |
