|
| 1 | Supplying,installation,testing and commissioning of 7.5 HP Horizontal openwell Submersible Pumps(80mmx65mm) suitable for operation on 415 V, 3 phase, 50 Hz AC supplycapable of performing following duty cyclei/c connection,testing etc. complete as required :-Discharge range :- 950-520 LPM Head range :- 20-36 Mtrs.Speed:- 2900 RPM |
| 2 | Supplying,installation,testing and commissioning of 2 HP Horizontal openwell Submersible Pumps (50mmx50mm) suitable for operation on 200-240V, Single phase, 50 Hz AC capable of performing following duty cyclei/c connection,testing etc. complete as required :-Discharge range :- 540-280 LPMHead range :- 9-21 Mtrs.Speed:- 2900 RPM |
| 3 | Supplying,installation,testing and commissioning of three phase Submersible Control Panel made out of powder coated sheet metal with Digital Amp. Meter & Voltmeter,Digital Overload relay , Short circuit/Over loadprotection,heavy duty Contactor, Single phase preventer suitable for 7.5 HP Submersible pump i/c connection etc. complete as required. |
| 4 | Supplying,installation,testing and commissioning of single phase Submersible Control Panel made out of powder coated sheet metal with Digital Amp. Meter & Voltmeter,Digital Overload relay, Short circuit protection,off delay timer,heavy duty contactor suitable for 2 HP Submersible pump i/c connection etc. complete as required. |
| 5 | Supplying of following sizes of PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed. |
| 6 | 4C x 16 Sq.mm. |
| 7 | 3Cx10 Sq.mm. |
| 8 | Laying of one number PVC insulated and PVC sheeted/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/DWC pipe / pole as required. |
| 9 | Up to 35 Sq.mm (DSR 2022 E&M/ Item No.- 7.5.1) |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)(DSR 2022 E&M/ Item No.- 14.16.1) |
| 11 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 12 | 65 mm dia (Item No.-18.12.7 Civil DSR Vol-II 2023) |
| 13 | 50 mm dia (Item No.-18.12.6 Civil DSR Vol-II 2023) |
