|
| 1 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(DSR-2018, 12.42) |
| 2 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 4.5 metre and upto 6.5 metreDSR-2018, 11.3.1 |
| 3 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metreDSR-2018, 11.3.4 |
| 4 | Painting of the electric pole with 2 coats of aluminium paint after cleaning of pole. Complete in all respects as per direction of E/I. UPPWD-2018 P.S. No. 634 |
| 5 | S/F of 11 KV TPMO Relco/Rama make 9 Nos. insulator of Jai shree/BHEL/Rama/ Rastriya make complete in all respects as per direction of E/I UPERC-2019 Page No-48 |
| 6 | S/F of out door type 11KV fuse set with insulator Jai shree/ BHEL make complete in all respects as per direction of E/I. Relco/ Rama/Rastriya /UPPCL approved make (AOR) |
| 7 | S/F of 11 KV pin 12\" long with insulator of Jai Shree/BHEL on cross arm fixed on HT pole including all T/P etc. complete in all respects as per direction of E/I (UPERC-2019) Pg-39 |
| 8 | S/F of 11 KV Disc insulator 70 KN or 7000 Kg. and fitting B&S heavy duty with clamp of cross arm fixed on HT Pole.UPERC-2019 Page no-48 |
| 9 | S/E of overhead line with ACSRconductor on steel tubular poles incl.service bracket and binding etc. as UPPWD-2018 PS No. 627 |
| 10 | Supply and burying of 600 mm x 600 mm x 6.0 mm GI plate, vertically for eathing with its top at least 3 meters below ground level complete with 20 mm dia. GI Pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 12 mm. dia. GI Pipe up to switch board (from appron to switch board the cost of GI pipe and GI wire will be extra) 30 cm. square GI Frame with hinged cover, masonry housing, alternate layers of charcoal/coke and salt at least 150 mm. thick alround etc. as per direction of Engineer-in-charge complete in all respects (This will apply for earthing of poles also). UPPWD-2018, PS-702 |
| 11 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. UPPWD-2018, PS 725B |
| 12 | S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) |
| 13 | Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete in all respect as per direction of E/I. DSR-2018, 14.16.2 |
| 14 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.complete in all respect as per direction of E/I. DSR-2018, 12.34 |
| 15 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paintUPPWD-2018, PS-623 |
| 16 | Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. UPPWD-2018, PS-621 |
| 17 | Supply & Fixing of XLPE Insulated Al. unarmoured Cable for working voltage for energizing the distribution boxes & Street light size of 1x16 sq.mm. complete in all respect as per direction of E/I. AOR |
| 18 | S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No. 501) UPSR -2018a)- 10 sq. mm 2 core |
| 19 | b)- 16 sq. mm 2 core |
| 20 | c)- 16 sq. mm 4 core |
| 21 | d) 25 Sq.mm. 3½ Core |
| 22 | e) 35 Sq.mm. 3½ Core |
| 23 | f)- 50 sq. mm 3.5 core |
| 24 | S/F of Plain or Pin type copper tin plated cable socket (Lug)to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I (PS No. 504) UPSR-2018a)-10 sq. mm |
| 25 | b)-16 sq. mm |
| 26 | c)- 25 sq. mm |
| 27 | d)- 35 sq. mm |
| 28 | e)- 50 sq. mm |
| 29 | f)- 70 sq. mm |
| 30 | g)-120 sq. mm |
| 31 | h)- 185 sq. mm |
| 32 | i)- 240 sq. mm |
| 33 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1- 16 sq. mm 2 core (DSR-2018 9.3.1) |
| 34 | 2- 25 sq. mm 2 core (DSR-2018 9.3.2) |
| 35 | 3- 25 sq. mm 3.5 core (DSR-2018 9.3.17) |
| 36 | 4- 50 sq. mm 3.5 core (DSR-2018 9.3.19) |
| 37 | 5- 70 sq. mm 3.5 core (DSR-2018 9.3.20) |
| 38 | Supply of following sizes high conductivity aluminium strand compacted circular conductor XLPE armoured 11 KV Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment at a depth of 900 mm. below ground level the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. Complete in all respect as per direction of E/I.1. 70 sqmm x 3 Core (UPERC-2019 P-41) |
| 39 | 2. 120 sqmm x 3 Core (UPERC-2019 P-41) |
| 40 | 3. 185 sqmm x 3 Core (UPERC-2019 P-41) |
| 41 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.Complete in all respect as per direction of E/I.1. 70 sq.mm(DSR-2018, 9.3.9) |
| 42 | 2. 120 sq.mm (DSR-2018, 9.3.11) |
| 43 | 3. 185 sq.mm (DSR-2018, 9.3.13) |
| 44 | 4. 240 sq.mm (DSR-2018 , 9.3.15) |
| 45 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq.mm to 400 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (DSR-2018) 8.1.2Upto 120 sq.mm |
| 46 | Upto120 sq.mm to 400 sq.mm |
| 47 | Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required . Complete in all respect as per direction of E/I.1. 70 sq.mm(DSR-2018, 10.2.1) |
| 48 | 2. 120 sq.mm (DSR-2018, 10.2.2) |
| 49 | 3. 185 sq.mm (UPERC-2019 P-28) |
| 50 | 4. 240 sq.mm (DSR-2018 , 10.2.3) |
| 51 | Supply and fixing of 150 mm. dia. G.I. Pipe B Class for cable duly clamped with supports by 1 Nos. with clamps of 20x3 mm. M.S. Flat, bolts, nuts and washer required for proper completion or work. UPERC-2019 Page-30 |
| 52 | Supply and laying of 2.5 sq.mm 3 core copper conductor unarmoured cable. Complete in all respect. As per direction of E/I. AOR |
| 53 | Supply & Fixing of XLPE Insulated Al. unarmoured Cable for working voltage for energizing the distribution boxes & Street light size of 1x25 sq.mm. complete in all respect as per direction of E/I. AOR |
| 54 | Supply & Fixing of XLPE Insulated Al. unarmoured Cable for working voltage for energizing the distribution boxes & Street light size of 1x35 sq.mm. complete in all respect as per direction of E/I. AOR |
| 55 | Supply & fixing of 230 mm x 32 mm x 1.5 mmgalvanised steel strips including holes for shakcle insulators pins and bolts etc. complete in all respect. UPPWD-2018, PS-622 |
| 56 | Repair of 63 KVATransformer incl. changing of HV & LV Coil, Bushing, Gasket &fresh Transformer oil without returning of old & unsearciable material. Complete in all respects as per direction of E/I (AOR) |
| 57 | Dis. /Re-errection of 63 KVA Al. Wound outdoor type Transformer as per ISS including fees as per direction of E/I (AOR) |
| 58 | S/F of Sintex Junction Box No-IIGSSJB2817 of Size 240x130x110 mm. Complete in all respect . AOR |
| 59 | Concrete with 4 cm gauge brick ballast, fine sand of 1.25 F.M. and cement , in proportion of 6 :3 :1 in foundation and under floors, including supply of all material, labour, tools & plant etc required completion of the Work. SOR- Item No-280 |
| 60 | Supply, Installation, Testing & Commissioning of Standrad 4 Mtr(Above Ground) hot dip galvanized(Granding of Galvanisation average 70 micron or better as per IS2629(AOR) |
| 61 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. E/I. UPPWD-2018 PS No. 1423 Catt-AAA |
| 62 | M.S. Strip (50x6mm ) Fencing (6 Feet Height including Civil work) as per direction of E/I. (UPER-2019) pg-53 |
| 63 | FRP Fencing (6 Feet Height including Civil work) as per direction of E/I. (UPER-2019) pg-53 |
| 64 | Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&Pcomplete in all respect as per direction of E/I. UPPWD-2018, PS-647 |
| 65 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect..P.S. No-641 |
| 66 | S/F of 2.5 sq.mm x 3 core cable as per AOR |
| 67 | Demolishing R.C.C. Work Manually by mechnical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of E/I. (AOR) |
| 68 | Laying old Cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. All complete as per the direction of engineer (AOR) |
| 69 | Taking out existing CC interlocking from footpath/central verge, including removal of rubbish etc, disposal of unserviceable material to the dumping ground, for wich payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of E/I. (AOR) |
| 70 | Supply & Laying of 1100 V grade Aerial Bunched Cable. Power Cable : Standed compacted circular aluminium conductor, XLPE insulated 1 Messenger conductor, Standed compacted..direction of E/I. AOR |
