|
| 1 | Supply, Installation, Testing and commissioning (SITC) of The digital audio network server shall be designed exclusively for use with the offered systems. The server shall support AVB digital audio and control networking by means of a modular 420 x 420 channel card. The server shall support up to three audio networking cards per unit. The server shall support up to one 420 x 420 AVB network card, up to two 32 x 32 channel CobraNet® digital networking cards, and up to two 64 x 64 Dante™ digital networking cards in any configuration that does not exceed three total networking cards. The server shall be factory configured with one DSP card and shall be capable of supporting a total of three cards. The server shall provide dual Ethernet ports for configuration and control connection. The server shall be configurable for up to 48 channels of local audio input and output, including mic and line level, VoIP, and telephone interface. The server shall also support modular I/O cards for acoustic echo cancellation and ambient noise compensation. The server shall provide front panel LED identification of server power, status, alarm, and activity as well as system-wide alarm. The server shall provide front panel OLED display for server and system information. The server shall be rack mountable (3RU) and feature software-configurable signal processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools. The server shall be CE marked, UL listed and shall be compliant with the RoHS directive. |
| 2 | Supply, Installation, Testing and commissioning (SITC) of fully 128 x 128 channels professional DSP fixed I/O server with 12 analog inputs, 8 analog outputs, 8 channels configurable USB audio, 128 x 128 channels of AVB, and Acoustic Echo Cancellation (AEC) technology (all 12 inputs) 128 x 128 channels , 12 mic/line level inputs, 8 mic/line level outputs, Gigabit Ethernet port RS-232 serial port 4-pin GPIO, 2-line OLED display with capacitive-touch navigation, Rack mountable (1RU) System configuration and control via Ethernet, Internal universal power supply, Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, and delay CE marked, UL listed, and RoHS compliant |
| 3 | Supply, installation, testing & commissioning ofMic/Line input card with selectable mic, line, mic gain, and phantom power per input. 32-bit analog to digital converters. |
| 4 | Supply, installation, testing & commissioning ofaudio output card for analog signals, complete with high-quality 32-bit digital to analog converters. |
| 5 | Supply, installation, testing & commissioning (SITC) of4k Matrix switcher having Three HDBaseTTM four HDMI®, and one multi-function analog video input, Dual, mirrored HDBaseT and HDMI outputs, 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling, Audio processing features plus matrix mixing for mic and program audio, Control integration features including RS-232 routing to local and remote devices, PoE (Power over Ethernet) source – remotely powers compatible HDBaseT endpoints,Six HDMI inputs, Six HDBase TTM outputs with 330 foot (100 meter) and 230 foot (70 meter) transmission of HDMI, power, and control,Two HDMI outputs with independently selectable mirror and matrix modes,4K/UHD capability @ 60 Hz with 4:2:0 chroma sub sampling,HDCP 2.2 compliant,Audio de-embedding with volume, mute, and five-band EQ,PoE (Power over Ethernet) source – remotely powers compatible HD Base T endpoints,TCP/IP, RS-232, and IR control, |
| 6 | Supplied, Installation, tested and commissioned (SITC) of 4K/UHD HDMI OverHD Base T TX/RX with Control and PoE Receiver kitfor HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control plus Power over Ethernet capability. The kit should transmit video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The kit should provide bidirectional extension of both 12 volt IR and RS-232 commands. The kit should be HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management. It should provide integrator-friendly features including: IEEE standards-based PoE transmission for safety and compatibility; HDCP 2.2 compliant for meeting the latest copy protection requirements; rack-mountable form factor for accommodating four transmitters in a single 1U rack tray; power chaining for powering multiple devices from one power Supplied; and front mounted USB port for easy firmware updates. |
| 7 | Supplied, Installation, tested and commissioned (SITC) of Relay Controller A unit that helps a person to control various electrical appliances (230V/7A or 24V) sitting at one place. The Controller can be controlled from local Keypad on front panel of unit or remote Milestone Keypad (Wired) or Milestone RF Remote device (Wireless) or from RS232C programmable port through universally available RS232C system controller. The Important feature being (a) 3 bit unit identifier for RS232C Control so that through one port of RS232C system controller 8 Relay controller box can be controlled (Max up to 8 Relay x 8 units = 64 Relays) (b) option for controlling forward and reverse motors. (Relay working in pairs). Controlling Motors for up/down screenProjector Mounting Kit up/downCurtains open/closePower ON the projector/switcher in sequencePower ON/OFF the lights |
| 8 | Providing services of specialized resource for programming Audio DSP and control system The resource should be both experienced in system design and audio as well as qualified to work with the specified product he should ensure the audioDSP system is set up for high quality audio and peak performance, as well to meet industry best practices using measurements and performance tested to confirm optimal quality is achieved . Thhe resource should be able to customise the audio DSP & control system requirement as per the useer departments requirement so as to provide the desired outcome and quality of meetings,conference calls, and presentations. As with control programming. |
| 9 | Providing Project Design, Project management services DWG / Schematic comprising of the coorrect integratioon of all the acbove audio & video components, Technical Consultation on system design and effectiveness, for end userneeds and room environments. All project documentation including system schematics and drawings, H&S documentation, Project Plan and Risk Register. Attendance at site meetings and liaisoning with other agencies or user deppartment on site to organise AV schedules. Regular client updates and weekly progress reports. Management of installation timescales, cost & deadlines to ensure the project is completed on budget and on schedule. |
