Tender For Constructing Sakav At Kinhal Chipatewadi Road Tal Dapoli Dist Ratnagiri (For Majoor Sahakari Sanstha Only)
Tender Value
20.65 Lakhs
Estimated cost
Bid Submission
22 Oct 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dapoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Sakav At Kinhal Chipatewadi Road Tal Dapoli Dist Ratnagiri (For Majoor Sahakari Sanstha Only)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By /manaual Means ) |
| 2 | Excavation for foundation in hard rock by blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 3 | Excavation for foundation in hard rock by chiselling and including shoring and strutting,dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 4 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 5 | Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drillinghole of 3 2mm diameter up to 0.75 mtrs depth, placing the dowel inposition andeffectively grouting the hole with CM 1:1 proportion etc. complete. |
| 6 | Providing and laying in situ/ready mix / ready mix M10 cement concrete of trap / granite/quartzite /gneiss metal in foundation including necessary centering, formwork ,bailing outwater, compacting and curing et complete. (with fully automatic micro processor based PLC with SCADA enabled with rever sibled rumty pemixer / concrete batch mix plant(pan mixer)with natural /artifical sand) |
| 7 | Providing and laying in situ / ready mix controlled grade of M 15 of trap / granite/ quartzite /gneissmetal for RCC works in cut off walls / curtainwalls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc complete. (with fully automatic micro process or based PLC with SCADA enabled with rever sible drum type mixer /concrete batch mix plant (panmixer) with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) |
| 8 | Providing and laying in situ / ready mix M-15 plain cement concrete of trap/granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc.including provisionof \"V\" shaped false joints to form suitable panelson the faces toapprove design with compacting by vibrating and curing complete, includingplywood/steel formwork centering ( excludingdewateringbymeans of pump) andincluding bailling out water and curing finishing in CM 1:3etc.complete. as directed byengineer incharge basic rate shall be increased for height above5.00 m in followinhmanners |
| 9 | Providing and laying insitu / ready mix controlled M-20 cement concreteof of trap /granite / quartzite/ gniessmetal for reinforced cement concrete caps over piers andabutments including necessary sacffolding plywood/steel formwork, compacting byvibrating, finishing in CM 1:3 and curing etc complete( Excluding reinforcement)Withreversible drum type mixer /concrete batch mix plant (panmixer).with fine agreegates ofrequired specifications ( VSI sand finely washed etc ) |
| 10 | Providing and layingin situ/ ready mix M-25 controlled cement concrete of trap/granite/quartzite/ gneissmetal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro process or based PLC withSCADA enabled concrete batch mix plant / panmixer and fine agreegates of requiredspecifications ( Natural sand/ VSI sandfinely washed etc ) |
| 11 | Providing and laying in situ / ready mix M 20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction,formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCAD Aenabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) RCC work of Ballast walls & Kerb |
| 12 | Providing,cutting,bending,hooking, tyingand laying in position TMT FE 500 steel barsfor reinforcement for all RCC works as per detailed drawings etc. complete. |
| 13 | Providing tar paper bearing including laying in proper position etc. complete. |
| 14 | Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete. |
| 15 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing forabutment returns, return walls etc. Complete. |
| 16 | Providing and laying in situ/ ready mix M 20 CC of trap /granite/ quartzite/ gneiss metalfor wearing course 8 cm thick including compacting,finishing,curingandfillinginjoints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 17 | Providing rubble filling behind abutments, returns of trap / granite /quartzite gneiss stones for foundations includingfilling voids with sand/grit and compaction etc complete. |
| 18 | Providing 100 mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. |
| 19 | Providing railing of mild steel angle post 2.0 m center to center of section 75 mm x 75 mm x10 mm or equivalent I/Csectionof height 1.05 above bridge surface with minimum anchor length of 30cmincludinghold fast of 25 mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30 cm x 30 cm x 30cm with three rows of 40 mm Bclass GI pipe provided at 30 cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete. |
| 20 | Providing and fixing Road junction / Information sign board of size 0.90 m x0.60 m. prepared on16 gaug eM.S. sheet with angle iron frame of size 35 x 35 x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green / whiteback ground and back side gray stovee namelled,bonded with red retro reflective sheet Engineering grade, border / letters /numeral / arrows, coated with non pealable crystal clear protective coat retaining 100%reflection including twoangle ironpost of size5 x 50 x 5 mm of 3.65 mlong in flated atbottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I.bolts and nuts of size10 mm dia.and 20 mm longsheet and angle ironpost inonepiecewithout joints includingall taxes, conveying,fixinging round with cement concrete 1:4:8 block of 60 cm x 60cm x75cm size as directed by Engineer-in-chargeetc.complete.Mild Steel Board with Engineering Grade. |
| 21 | Test reports - Coarse aggregate-water apsorption,Fine aggregate - -stilt factor-, Basic cement test,Concrete cube test |
| 22 | Royalty |
AI Tender Summary
Tender Timeline
Oct 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender