Tender For Supply Of Material And Erection For Increasing Capacity Of 33/ 11 Kv S/S (1X5 To 1X10 Mva) Bhatni-Ii, Distt.Fatehpur. Under Additional Business Plan 2024-25 On Semi Turnkey Basis Under Edc, Fatehpur 1 Supply of Material and Erection for Increasing Capacity of 33/ 11 KV S/S (1x5to 1x10 mva)Bhatni-II,distt.Fatehpur 2 ERECTION OF WORK AS PER RESSPO NORMS. 3 Erection of complete structure for 33 KV lightening arrestor in switch yard. as per RESPO drawing. Work includes Erection of 3 Nos.33 KV Lightening arrestor, its fitting and mounting with care. Grouting of structure with L.C, of 1:3:6 construction of plinth size 0.90x0.45x 0.45 cum. plastering the plinth with cement mortar with cement and sand in ratio 1:4. Worksincludes cost of clamp concrete material, labour T&P and cement, which shall be provided by the contractor. 4 Erection of complete 33 KV VCB with structure in switchyard and grouting of VCB Structures. C.T. Structure by cement, sand, brick ballast mortar in ratio 1:3:4. Work includes complete fitting of VCB and C.T. on structure carefully with making all connections of control cable for operating the VCB and C.T. Only VCB, C.T., Battery and battery chargar and their structure shall be provided by the department. All other item like cement, concrete material, T&P shall be provided by the contractor. Work also includes installation and commissioning of Battery and Battery charger. 5 Installation of 33 KV transformer control pannel in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. Work includs fitting of all accessories in all respect with complete connection of control cable with pannel.Grouting material will be provided by the Contractor. 6 Repairing of Existing T/F plinth size 4.46 x 3.46 x 1.0 Mtr. 7 Dismantling ofSwitchyard fencing for safe shifting of old 5/10 MVA power T/Fs 8 Safe Shifting & dragging of old 5 MVA T/F from inside to out side of Switch Yard after detaching its accessories i.e. Radiator, conservator etc and empting the T/F i.e taking out the T/F oil and disconnecting all 33 KV and 11 KV connections as well as dismantling of 11 KV cable stand and neutral stand.All tools & T&P shall be provided by the contractor. 9 Safe shifting and dragging of 10 MVA Power Transformer from outside of Switch Yard to inside of Switch Yard taking precautions to avoid damage of bushings of Transformer and other accessories. All tools, T&P etc shall be provided by the contractor. 10 Erection of 10 MVA Power Transformers on plinth, fixing of all accessories like radiator, conservator tank etc. complete and filling of T/F oil in Transformer complete in all respect. 11 Special earthing of neutral and body of 10MVA T/F with the help of 3 Nos.G.I. pipe 40 M.M. dia. length 20 feet. G.I.pipe for making of delta, and 2 nos for body earthing complete in all respect and connected with 50x6 m.m GI Strip. G.I. Pipe,G.I. Strip etc. required for completion of work in all respect shall be provided by the Contractor. 12 Special earthing of T/F neutral by boring 2” dia 20 feet long G.I. pipe in the wet earth and connecting it with 35x6 mm. G.I. strip to T/F neutral giving half round turn at the T/F. Two separate earthing to be provided to T/F body by connecting it with earth mat by special earthing arrangement for earthing work. Material Like Strip of size 50x6/35x6 mm and G.I. pipe 2” dia 2.9 mm thick shall be provided by the contractor used in above work. 13 Laying of 11 KV 3 x 70/120/185/300 Sqmm. XLPE power cable by digging 0.75 Mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it RMT and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be provided by the contractor. Rates may be quoted per RMT 14 Cartage of materials from store center Naini to site, like all Sub station structure, 11 KV Switch gears, Earth mat material, poles, station T/F, All Equipment (TPMO, LA, Fuse set, C.T, P.T. Isolators, VCB, Conductor, Cable, etc.) 15 Termination of cable boxes of size 11 KV 3 x 120/185/300 Sqmm. Joniting Kits 16 Indoor 17 Outdoor 18 Laying of following copper control cable form C.T. T/F to transformer control pannel/protection Board. All control cable shall be supplied by the contractor. 19 2x2.5 mm2 20 4x2.5 mm2 21 Installationof 24 volt Battery & Battery Chargershall be providedby the contractor
