|
| 1 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 2 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level. |
| 3 | Demolition of reinforced Cement Concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for. |
| 4 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof covering. |
| 5 | Dismantling structural steel work in cluding doors, gates framed truss etc. |
| 6 | Demolition of Brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar, including all quoins, arches pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 7 | Felling of tree exc. 30 cm and n exc. 100 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m and clearing site . |
| 8 | M & L for Excavating in trenches hard/dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 9 | M & L for Excavating in trenches hard/dense soil, n exc 1.5 m wide and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 10 | M & L for Hardcore (Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 11 | M&L for Cement concrete in foundations, filling and mass concrete Type C-2 1:3:6 (40mm graded aggregate). (Make for Cement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 12 | M&L for Cement concrete in foundations, filling and mass concrete Type B-2 1:2:4 (40mm graded aggregate). (Make for Cement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 13 | M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 14 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal with fair finish surface of concrete. |
| 15 | M&L for Reinforced cement concrete (nominal mix) in Columns, pillars, piers, posts and struts Type A1 M-20 1:1.5:3 (20mm graded aggregate) (Make for OPC Cement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 16 | M&L for Reinforced cement concrete (nominal mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,lintels etc.; basement slabs, under-reamed piles and mass concrete Type A1 M-20 1:1.5:3 (20mm graded aggregate) (Make forCement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 17 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses. (Make forCement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 18 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Make forCement :- UltraTech, ACC, Ambuja, Shree Cement, J.K. Cement, Birla cement). |
| 19 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips. (Make:- Sail, JSW, TATA, Jindal, Essar). |
| 20 | M&L for Mild steel TMT bars 6mm to 8mm dia. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. (Make:- Sail, JSW, TATA, Jindal, Essar). |
| 21 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar1:6. |
| 22 | M & L for Providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, Type B1 1:2:4 (20mm graded aggregate). |
| 23 | M&L for rendering 15mm thick cement plaster on fair faces and other than fare face of brick work or concrete surfaces in CM 1:6 and rendering is to be finished even and smooth (without using extra lime or cement). |
| 24 | S & F ofPlates (plain or chequered) Fe-410-W(Gde E-250) quality B channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. |
| 25 | S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long Diameter of neck in 16 to 20 mm. |
| 26 | S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 27 | S & F ofPrepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. (Make- Jindal, JSW, Tata, Eassar, Cril). |
| 28 | S & F for turbo ventilators, including air blowers with FRP sheet) in roof sheeting including all fixing arrangements complete all a specified and as directed by the EIC. |
| 29 | M & L for Preparation of new or previously untreated steel and iron surfaces of any description over 10cm girth or width, not otherwise described and apply one coat of red oxide and two coat of synthetic enamel paint, colour and quality verified by EIC. (Make - Asian, Berger, Indigo, Dulux, Nerolac, Shalimar). |
| 30 | S & F of Glazed ceramic tiles (Coloured tiles) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match,colour and quality verified by EIC.(Make :- Kohler, Kajaria, Somany, Cera, Vermora). |
| 31 | S & F of Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, colour and quality verified by EIC. (Make :- Kohler, Kajaria, Somany, Cera, Vermora). |
| 32 | M & L forGranite (of any type) 20mm thick work (table rubbed and polished) for wall lining (veneering to wall), floors with corner moulded of any shape, 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 33 | Supplying and fixing of Glass mosaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of EIC. The glass mosaic tiles to be fixed with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same, colour and quality verified by EIC.(Make :- Kohler, Kajaria, Somany, Cera, Vermora). |
| 34 | S & F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 35 | S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 36 | S & F Butt hinges, heavy weight, cold rolled mild steel, and fixed size of hinges in 75 mm. |
| 37 | S & F Aluminium handles, cast type, anodisedsize 100mm. |
| 38 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed Length of bolt in 100 mm. |
| 39 | S & F ofVitreous China wash down water closet pan (pedestal pattern), white included trap, bolts (excluding, flushing cistern and flush pipe). (Make -Jaquar, Kohler, Cera, Parryware) |
| 40 | S & F fixing of stainless Steel chrome finish hand free spray jet of any length, quality shall be verified bythe EIC. (Make -Jaquar, Kohler, Cera, Parryware) |
| 41 | S & F fixing of stainless steel chrome finish health faucet 1 to 1.25 m hose pipe, quality shall be verified bythe EIC. (Make - Jaquar, Kohler, Cera, Parryware) |
| 42 | S & F Plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan as per requiremnet. (Make -Jaquar, Kohler, Cera, Parryware) |
| 43 | S & F PVC connections 15mm size with PTMT nuts of length 450mm. (Make -Jaquar, Kohler, Cera, Parryware) |
| 44 | S & F of 10 liters capacity PVC valveless, symphonic action type, flushing cisternlow level, white with inlet ball valve float and handle including brackets and pipe of polyethyline of low or high density or PVC 32 mm dia for low level cistern.(Make -Jaquar, Kohler, Cera, Parryware) |
| 45 | S & F of 750mmx600mm bevelled edge mirror of selected quality glass, decorative type with all fittings. |
| 46 | S & F Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe (Make -Jaquar, Kohler, Cera, Parryware) |
| 47 | S & F of Brass chromium plated bottle traps bore of trap 32 mmfor wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.(Make -Jaquar, Kohler, Cera, Parryware) |
| 48 | S & F of Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed bore dia of pipe is 15 mm. (Make -Jaquar, Kohler, Cera, Parryware) |
| 49 | S & F of fancy type, chromium plated Angle/Stop/Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedbore dia of pipe is 15 mm. (Make -Jaquar, Kohler, Cera, Parryware, Hindware) |
| 50 | S & F of Stainless steel Brass chromium plated over head rain shower (12x12 inch) with 15 inch shower aRm wall mounted. (Make - Jaquar, Kohler, Cera, Parryware) |
| 51 | S & F of chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed bore dia of pipe is 15 mm. (Make -Jaquar, Kohler, Cera, Parryware) |
| 52 | M & L for Cuttinggrooves in brick wall ,75 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3. |
| 53 | S & F of 15 mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to walls / ceilings / floors etc any type of pipe. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 54 | S & F of 20 mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to walls / ceilings / floors etc any type of pipe. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 55 | S & F of 32mm bore dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 56 | S & F of Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, bore dia of pipe 20mm. (Minimum weight20mm - 92gms). (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 57 | S & F of PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, Diameter of outlet is 75 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 58 | S&F PVC(SWR)pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore dia 110mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 59 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore dia 75mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 60 | S & F of PVC (SWR)bendsany radius, Bore Dia is 110 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 61 | S & F of PVC (SWR)bendsany radius, Bore Dia is 75 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 62 | S & F of PVC (SWR) junction single, (Single T) equal or unequal, Bore Dia is 110 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag) |
| 63 | S & F of PVC (SWR) junction single, (Single T) equal or unequal, Bore Dia is 75 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag) |
| 64 | S & F of PVC (SWR) vent cowl, Bore dia is 110 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag) |
| 65 | S & F of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I Capicity of tank 1000 litres. (Make - Syntex, Supreme, Plasto, Ashirvad). |
| 66 | S & F of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) bore dia of pipe is 20 mm (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 67 | S & F of Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms ) bore dia of pipe is 20 mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag). |
| 68 | S & F of Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges. (Make -Jaquar, Kohler, Cera, Parryware, Hindware) |
| 69 | M & L for 3mm thick wall care putty on Wall. Quality shall be verified by EIC.(Make :- forPutty :- Birla white, JK white, Asian Dr. fixit, Nippon). |
| 70 | M & L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of water proofexterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.(Make :- Asian, Indigo, Berger, Nerolac, ). |
| 71 | S & F of swimming pool pressure sand filter (fiber reinforced plastic), filter diamter 1000mm, flow rate 36000 liters per hour with multiport valve, user friendly handle, anti corrosion, UV registance surface allow the filter work under direct sunlight, advanced technology ensure fast draining and consistent water flow, sand filter comes with a precise gauge, low maintenance, working pressure 36 PSI and testing pressure 56 PSI and with all accessories, including non-return valve if required . (Make - Austin, Blue wave, Macway, Aquanomics) |
| 72 | S & F of 5HP horizontal high efficiency, self priming, low noise centrifugalrecirculating pump for swimming pool with one piece body in durable resistant composite material, stainless steel shaft, fast opening translucent lid for pre filter with IP 55class F continuous rating, for recirculating the pool water with control valves etc.(Make - Austin, Blue wave, Macway, Aquanomics) |
| 73 | M & L for filter media silica sand for swimming pool sand filters with its complete multiple layers. |
| 74 | S & F of 50mm bore dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with including all the fittings.(Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag) |
| 75 | S & F of PP-R Gate/ball valves (brass insert) as per requirement of the site outer dia of pipe dia 50mm. (Make :- Supreme, Ashirvad, Astral, Finolex, Prince Pipe, Prayag) |
| 76 | S & F of ABS UV resistant wall/floor delivery nozzlemax. discharge capacity 5 m3/hr for in swimming pool for water filtration equipement, 50mm dia, quality verified by EIC.(Make - Austin, Blue wave, Macway, Aquanomics) |
| 77 | S & F of ABS UV resistant suction/vacuum nozzle for swimming pool, flow rate 9 m3/hr, dia 50mm. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 78 | S & F of three steps swimming pool ladder SS 304 of stainless steel premium graded anti corrosive, anti slippery18 gauge, dia 38mm with all aspects. |
| 79 | S & F of four steps swimming pool ladder SS 304 of stainless steel premium graded anti corrosive, anti slippery18 gauge, dia 38mm with all aspects. |
| 80 | S&F of 18W/12V ABS UV resistance anti corrosive, underwater LED light of size 8\" to be used in the pool. Quality will be verified by EIC. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 81 | S & F of ABS pool main drain unit with top grating including collectionbasin of any size. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 82 | Supply of suction sweeper SS trolley with 1HP pump ( copper motor with low noise and high flow) with all aspect.(Make - Austin, Blue wave, Macway, Aquanomics) |
| 83 | Supply of vacuum hose pipe blow moulded , length 20 meter, dia 40mm for cleaning of swimming pool. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 84 | Supply of aluminiumtelescopic pole for swimming pool, min. length 4.8 meter. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 85 | Supply of suction/vacuum head, size 18 inch for swimming pool. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 86 | Supply of nylon wall brush, size 18 inch. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 87 | Supply of heavy duty leaf net deep. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 88 | Supply of stainless steel high grade algae brush. (Make - Austin, Blue wave, Macway, Aquanomics) |
| 89 | S & F/ Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 90 | M&L for Point wiring for one light point or one fan point controlled by one switch with pvc single core sheathed copper conductor FRLS cables 2.5 sq. mmsize in pvc conduit.(Cable Make: Finolex, Havells, Anchor, RR kabel, Polycab) |
| 91 | M&L for Point wiringfor 3 pin socket out let 15Aon an independent boardwith pvc single core sheathed copper conductor FRLS cables 4.0 sq. mmsize in pvc conduit. (Cable Make: Finolex, Havells, Anchor, RR kabel, Polycab) |
| 92 | S&F of Wiring for circuit/submain wiring alongwith earth wire with the following sizes of 2x2.5 sq. mm +1x2.5 sq. mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required in pvc conduit. (Cable Make: Finolex, Havells, Anchor, RR kabel, Polycab) |
| 93 | S&F for Wiring for circuit/submain wiring alongwith earth wire with the following sizes of 2x4.0 sq. mm +1x4.0sq. mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required INpvc conduit. (Cable Make: Finolex, Havells, Anchor, RR kabel, Polycab) |
| 94 | S&F of White cover plate with frame, 6 module (Make: Captain, HPL, Legrand, Havells) |
| 95 | S&F of Metal flush box 6 module |
| 96 | S&F of Socket, 6A - 2/3 pin combined 2 module. (Make: Captain, HPL, Legrand, Havells) |
| 97 | M&Lof Modular switch 1 way 10A,1 module |
| 98 | S&F of Socket, 6A/16A - 2/3 pin combined 2 module. (Make: Captain, HPL, Legrand, Havells) |
| 99 | M&Lof Modular switch 1 way 16A,1 module. (Make: Captain, HPL, Legrand, Havells) |
| 100 | Supply and fixing amp rating SPN 32 AMP, 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: Captain, HPL, Legrand, Havells) |
| 101 | M&L forMCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA. (Make: Captain, HPL, Legrand, Havells) |
| 102 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. |
| 103 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. |
| 104 | S&F of Sheet MetalEnclosures For DB\"S When MCBs To Be Used single pole and neutral 4 way double door with 200 amps,240V rated bus. (Make: Captain, HPL, Legrand, Havells) |
| 105 | M&L for Ceiling rose, 3 phase/PVC/polycarbonate, isolated body |
| 106 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers.(Make:Usha, Bajaj, Khetan, Havells) |
| 107 | Tubes, \"medium grade\" 50mm galvanised, with all fitting and fixed complete to walls and ceilings or laidin floors |
| 108 | Supply & installation of Direct on line Motor Starter ,3 phase ,5.5KW/7.5 HP,415V,50Hz. (Make: L&T, Siemens) |
