|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Upto1.5 M.) By Mechanical MeansSSR Pg No./It No.135/721/21.02/BDA1Spec. No. : Bd A.1 Page No. 259 |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Upto1.5 M.To 3.0M)By Mechanical MeansSSR Pg No./It No.153/723/21.04/BDA1 Spec. No. : Bd A.1 Page No. 259 |
| 3 | Providing dry/trap/granite/quartzite/gneiss rubble stone soiling 15 cm to 20 cm, thick including hand packing and compacting complete.SSR Pg No./It No.157/752/21.38/BDA12 Spec. No. Bd. A 12 Page No. 264 |
| 4 | Providing and laying Casting in situ,/ Ready mix concrete cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel Centering ,formwork, laying / pumping, compacting,roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed sand VSI Grade finally washed etc.) SSR Pg No./It No. 175/827/24.01/BDE1 Spec. No. Bd. E. 1 Page No. 287 |
| 5 | Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.178/836/25.11/BDF3Spec. No. Bd. F. 3 Page No. 298 and B-7 Page No. 38 |
| 6 | Providing and casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc )SSR Pg No./It No.179/841/25.31/BDF5Spec. No.:Bd. F. 5 Page No. 300 and B-7\"Page No.38 |
| 7 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundationand plinth of inner walls/in plinth of external walls including bailing out water, striking joints on un exposedfaces and watering complete.SSR Pg No./It No. 199/904/28.01/BDH1Spec. No. : Bd.H. 1 Page No. 329 |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No. 185/862/26.23/BDF12Spec. No.Bd. F. 12 Page No. 304 and B- 7, Pg 38 |
| 9 | Providing and casting in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc )SSR Pg No./It No.182/851/25.70/BDF8Spec. No. :Bd.F.8 Page No. 302 and B-7, Page No.38 |
| 10 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete. SSR Pg No./It No.197/889/27.01/BDG1Spec. No. Bd.G.1 Page No. 313 |
| 11 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding etc Complete. SSR Pg No./It No.197/892/27.05/BDG5Spec. No. Bd.G.5 Page No. 315 |
| 12 | Providing & casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc )SSR Pg No./It No.181/846/25.50/BDF6Spec. No. : Bd.F.6Page No.300 and B-7, Page No. 38 |
| 13 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR Pg No./It No. 188/871/26.33/BDF17 Spec. No. : Bd.F.17, Page No. 306 |
| 14 | Filling in plinth and floors with contractor’s material / brought from out side and approved by engineer incharge in layer of 15 cm to 20 cmincluding watering and compaction. Etccomplete.SSR Pg No./It No.157/751/21.37/BDA11 Spec. No. Bd. A 11 Page No. 263 |
| 15 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR Pg No./It No.173/816/23.01/BDC2 Spec. No.: Bd.C. 2 Page No. 275 |
| 16 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550MPayieldstrength,metallichotdipcoatedwithAluminium-Zincalloy(55% aluminiumm43.4%zinc1.6%silicon)withCOLORBOND(R)steelqualitysuper durablepolysterpaintcoat(with inorganicpigment).Thepaintshall havea total coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubletsquare fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbe designedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturersproductdetailsmarkedaregularinterval.includingfastenerswithmin. fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrewetc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)600 mm girth (Surface Width).SSR Pg No./It No. 237/1175/38.35/BDR Spec. No. : As Directed By Engineer Incharge. |
| 17 | Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). SSR Pg No./It No. 233/1445/38.05/BDR5Spec. No. : Bd.R.5 Page No. 453 |
| 18 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm widewithteakwoodplanking20mmthickincludingtwocoatsofcoal-tarring theupper surface of plank etc. complete.(excluding painting to underside of plank).. SSR Pg No./It No. 233/1449/38.09/BDR 10ASpec. No. : Bd. R. 10, Page One Number 455 |
| 19 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing complete.SSR Pg No./It No. 210/968/32.17/BDL15B Spec. No. : Bd.L.15 Page No. 372 |
| 20 | Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete.SSR Pg No./It No. 209/959/32.05/BDL2BSpec. No. : Bd.L.2 Page No. 368 |
| 21 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR Pg No./It No. 209/963/32.11/BDL7Spec. No. : Bd.L.7 Page No. 369 |
| 22 | Providing and laying polished machine cut shahabad stone slabs 20 to 25 mm thick for treads and risers of steps and staircases,with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float , filling joints with neat cement slurry, curing, polishing and cleaning complete.SSR Pg No./It No.214/1004/33.17/BDM22Spec. No. Bd. M. 22 Page No. 390 |
| 23 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fittedwith sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate300x300x3.15mmminimumsizeandshapewithsquarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mmthicknessandofanysizeattopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade cast iron ormildsteelandonecoatofredleadprimeretc.complete.(I.S.62481979)(With mechanical gear)SSR Pg No./It No.249/1218/39.25/BDT-55Spec. No.BD-T-55 PageOne Number 510 |
| 24 | Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNESTYRINE(ABS)Doorshutterforinternaluseincluding toiletsmade upof outerABSsheetof1.2mmthickhavingpuffinsulationof35 to40Kilogram/One Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden blocktoreceivefixtures,havingM.S.hinges100mmlength,M.S.handles150mm length and 10 mm dia sliding door bolt etc. completSSR Pg No./It No.261/1275/39.80/BDTSpec. No.As Directed By Engineer Incharge. |
| 25 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete. SSR Pg No./It No. 224/1083/35.13/BDO8 Spec.No.:Bd.O. 8 Page No. 406 |
| 26 | Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures & fittings in two leaves with strong hold fast embedded in c.c. block at top & bottom with locking arrangement including cutting, bending, making holes and with one coat of primer complete. complete. SSR Pg No./It No. 173/820/23.05/BDC Spec. No. :As directed by engineer incharge |
| 27 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.) SSR Pg No./It No. 298/1575/46.39/BDW Spec. No. As Directed By Engineer Incharge |
| 28 | Excavation for roadway in earth, soil of all sorts, sand, graval or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.SSR Pg No./It No. 23/87/2.11/MORTH301Spec. No. : MORTH 301 |
| 29 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density.By Mechanical Means- Grading II(Using Screeningtype A 11.2) mm Aggregrate) SSR Pg No./It No. 29/130/3.20/MORTH404 Spec. No. : MORTH 404 |
| 30 | Supplying hard murum/kankar at the road site, including conveying and stacking complete. SSR Pg No./It No. 29/102/2.29a |
| 31 | Spreading hard murum/ soft murum/gravel or kankarfor side width etc. complete.SSR Pg No./It No. 29/104/2.30 |
| 32 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. SSR Pg No./It No. 25/105/2.31 |
| 33 | Providing and fixing 90 cm. x 60 cm. Granite plate engraving 10cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete. SSR Pg No./It294/1527/44.12/BDW7Spec.No.:Bd.W.7 Page No.586 |
| 34 | Providing and fixing Information sign board of size 0.90 X 0.90 m . Prepared on 16 guage M S Sheet with horizontal bracting of M S flat os size 25 X 6 mm uncluding painting with one coat of zinc cromzte primer and two coats oil painting including twonumber of M S angleiron post of size 50 X 50 X 6 mm of 2.70 m longincluding conveying all taxes fixing in ground with cement concrete 1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge stc. complete. |
| 35 | Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete.SSR Pg No./It No. 46/205/6.05/MORTH801 Spec. No. :MORTH 801 |
| 36 | Providing , Fixing & Laying Of M.S. Grating with Hot Dip Galvaniseingfabrication , nutbolting , welding , painting in 2 coat colour with transportition , led , Lift & Labour Charges etc. complete . ( as per engineer Incharges ) |
| 37 | ADD FOR SAND ROYALTY CHARGES |
| 38 | ADD FOR OTHER MINERALS ROYALTYCHARGES |
| 39 | Test of Bricks -Water Absorption (Set of 5 Bricks). Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) SSR Pg No./It No.584/13 |
| 40 | Test of Concrete - CompressiveStrength OF C.C. M10,C20 Cube (Set of 3 cubes)SSR Pg No./It No.584/19 |
| 41 | Test ofConcrete-Concrete mix design by Accelerated curing method. (By Accelerated curing method) SSR Pg No./It No. 584/23 |
| 42 | Test ofCement - Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, SoundnessSSR Pg No./It No. 584/1 |
| 43 | Test of Mortor - CompressiveStrength OF C.C. Cube (Set of 3 cubes) SSR Pg No./It No. 585/27 |
| 44 | Test of Murum -Sieve Analysis . SSR Pg No./It No. 585/29 |
| 45 | Test of Steel 6mm,8mm,10mm,12mm,16mm dia -Tensile strength , %, Elongation, Yield Stress, Weight -Per Meter, Bend/ Rebend Test,Proof Stress. SSR Pg No./It No. 586/77 |
| 46 | ADD 18.00% FOR G.S.T. CHARGES |
