Tender For Construction Of Collection And Processing Shed (191 Sq. Mtr)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Oct 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohol → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Collection And Processing Shed (191 Sq. Mtr) Construction Of Collection And Processing Shed (191 Sq. Mtr)
BOQ
| Sl. No. | Item Description |
| 1 | Construction Of Collection And Processing Shed (191 Sq. Mtr) |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with out SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC withoutSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed desig ns and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be rovided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks, laying/pumping,compactingand rougheningthesurfaceif specialfinishistobeprovidedandcuring complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumpingcompactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete. DSR P.No.189/27.05 |
| 13 | Filling in plinth & floors with excavated murum laying in layers of 15 to 23cm thk. Layer ,watering, compaction etc. |
| 14 | Filling in plinth & floors with Contractors murum laying in layers of 15 to 23cm thk. Layer ,watering, compaction etc. |
| 15 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 16 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 17 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 18 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoat roughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurface bytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 19 | Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. 33.05 |
| 20 | Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 21 | Providing and fixing heavy duty interlocking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. comlete |
| 22 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old andnewsurfaces intwocoatsincludingscaffolding,preparingthesurface.(excludingthe primer coat)etc. complete. |
| 23 | Providing & applying two coats of waterproof cement paint to new plastered surface including scaffolding & preparing surface by brooming & brushing, watering for two daysetc. complete. |
| 24 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asper detaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixingin positionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding onecoatofanticorrosivepaintand overit twocoatsofoilpaintingofapprovedqualityandshadeetc. complete. |
| 25 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). |
| 26 | Providingandfixing30mmthick SOLIDPANELPVCINTERNALDOORSHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved makeandmanufacture.M.S.frameshallbe coveredwith5mmthickheatmolded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mmthickPVC sheetbeadingoneitherside,andjoinedtogetherwithsolventcement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. includingstainlesssteelfixturesand fastening Completeasper direction of Engineerincharge,manufacturer\"sspecification and drawing. |
| 27 | Providing andfixing inposition.(asperI.S.1868/ 1982) Aluminium sliding window oftwo tracks with rectangularpipe having overalldimension63.50x38.10x1.02mm atweight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695 Kilogram/Running metre.Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/Running metre. The shuttershouldbeofbearingbottom40x18x1.25mmatweight0.417Kilogram/Runningmetre.Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25mmatweight0.417Kilogram/Runningmetre.andtopsection40x18x1.25mmatweight0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in chargewithall necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. |
| 28 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) |
| 29 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingto gradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwosetsofcrossingswithhold fasts,stoppers,spaces, handles, locking arrangement andone coat of red lead primer andoil painting etc. complete. (I.S. 105211983). |
| 30 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 31 | Providing and erecting chain link fencing 1.6 M. height withG.I. chainlink of size 50 x 50 mm, 8 gauge thickandfixed75mmabovegroundlevelonverticalM.S.Anglesof40x40x6mmsize,includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top andbottom of 25 x 25 x 5 mm size andvertical M.S. flat 35 x 5 mm and25 x 5mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. |
| 32 | Providing and fixing board displaying information,such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation, and labour etc complete Spec. No. As directed by Engineer in Charge DSR 6.60 |
| 33 | Material Lab Test |
| 34 | Test of Sieve Analysis |
| 35 | Concrete Mix Design ( With all Test on Basic Materials ) |
| 36 | Test of Compressive Strength - M10 Cubes |
| 37 | Test of Compressive Strength - M20 Cubes |
| 38 | Test of Steel Bars Upto 16mm - (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter,Bend / Rebend Test, Proof Stress.) |
| 39 | Royalty |
| 40 | Add Royalty Charges for Sand |
| 41 | Add Royalty Charges for Other Materials |
| 42 | ESHS Compliance |
| 43 | Management Strategies andImplementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct |
AI Tender Summary
Tender Timeline
Oct 14, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 31, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender