|
| 1 | A) Compound Wall |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 3 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with Natural / VSI standard Artificial Sand) |
| 4 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks incement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 6 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand facedtreatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 7 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 8 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) |
| 9 | Providing and fixing Cement Benches |
| 10 | Providing,aupplying,fabricating and fixing panel of aluminium composite panel claddingin approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thickFR grade mineral core following NBC part IV Fire and life safety (having 2 hours fireresistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitchedbetween two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) Thealuminium composite panel cladding sheet shall be coil coated with kynar 500 basedPVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic)coating of approved colour and sg=hade on top face and polymer (service) coating ofbottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weathersilicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5Kilogram/ One Square Metre) |
| 11 | Providing white and colour washing to road side trees in 2 coats in 2 bands of white andone red band at centre of 30 cm height each including preparing the surface, cost ofmaterial, conveying etc. complete |
| 12 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor,Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 13 | B) Green Gym |
| 14 | Providing and fixing \"AIR WALKER\" |
| 15 | Providing and fixing \"CROSS TRAINER\" |
| 16 | Providing and fixing \"ROWER\" |
| 17 | Providing and fixing \"SHOULDER BUILDER\" |
| 18 | Providing and fixing\"STANDING AND SITTING TWISTER\" |
| 19 | Providing and fixing \"Excer Cycle \" etc complete. |
| 20 | Providing and fixing\"Swing Bangwai\" etc complete. |
| 21 | C) Electrification |
| 22 | Supplying installing, testing and commissioning Solar street light pole comprising of 12W LED luminaire, 12.8V-30Ah Li battery, with 75Wp Solar panel, MS Powder Coated Battery Box weatherproof, mounted on 5/80 mm dia. BGrade GI Pole of 6 Mtr. height (5m above ground & 1m below ground), 12W LED Chip of luminaire should be in compliance to IES: LM-80 & Performance parameters of luminaire shali be as per IES LM- 79:2008 Or IS 16106 2012); along with brackets, foundation, earthing and necessary accessories complete as per MNRE specification (With 5 Years warrantee |
| 23 | Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete 3 erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority(as per PWD CSR 2022-23 CSR NO.6-1-19) |
| 24 | Add GST Charges 18% On A |
| 25 | Add 0.5% Insurance On A |
| 26 | Add For Royalty Charges A |
| 27 | Quality Control Testing Charges A |
| 28 | Add GST Charges 18% OnB |
| 29 | Add GST Charges 18% OnC |
| 30 | Add 1% Insurance On C |
