Tender For Upgradation Of Manager Quarter At Bmf Agling; 1 Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.Ssheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS:277 and consisting of angle cleats of size 25 mmwidex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to theangle hangers of 25x10x0.5mm of required length with nuts & bolts ofrequired size and other end of angle hanger fixed with G.I. channels45x15x0.9 mm running at the spacing of 1200 centre to centre, to whichthe ceiling section 0.5mm thick bottom wedge of 80mm with taperedflanges of 26 mm each having clips of 10.5 mm at 450mm centre tocentre, shall be fixed in a direction perpendicular to G.I. intermediatechannel with connecting clips made out of 2.64mm diaX230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5mm thick27mm high having flanges of 20mm and 30 mm long, the perimeter ofceiling fixed to wall/partition with the help of rawl plugs at 450 mm centreto centre, with 25mm long drive-all screws @ 230 mm interval ,includingfixing of gypsum board/calcium silicate board to ceiling section andperimetre channel with the help of dry wall screws of size 3.5x25mm at230mm c/c, including jointing and finishing to a flush finish of taperedand square edges of the gypsum board with recommended jointingcompound, jointing tapes, finishing with jointing compound in 3 layerscovering upto 150mm on both sides of joint and two coats of primersuitable for board, all as per manufacturers’ specification and alsoincluding the cost of making openings for light fittings, grills diffusers,cutouts made with frame of perimetre channels suitably fixed all completeas per drawing and specification and direction of the Engineer-in-Chargebut excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming toIS: 2095-Part 1 : 2011 (Board with BIS certification marks) 2 Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extrudedglazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304grade) friction hinges, zinc alloy (white powder coated) casement handles, G.Ifasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shallbe also fusion welded including drilling of holes for fixing hardwares anddrainage of water etc. After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof silicon sealant over backer rodof required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. (Single / double glass panes and siliconsealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment onthis account shall be made. Casement window single panel with S.S. friction hinges (400 x 19 x1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead ofappropriate dimension. (Area of window above 0.75 sqm.) 3 Providing and fixing interlockingwall panel 4 wide including beading and polishing along with all necessary fittings as per directions of engineer in charge, all complete. 4 Polishing on wood work with ready mixed wax polish of approved brandand manufacture on New work 5 Providing and fixing of Modularkitchen Cabinet including supply of all Kitchen accessories like Chimney, Stove, Gas Cylinder, Water Heater, Drawers, Handles, refigrator etc of A+ Quality, finished cabinets of Kitchen( size 10- 0 x 8-o) 6 Garden lights and interior Solar lights and other small items 12 watts 7 Interior lights ceiling lights warm/ white 6 watts lights 8 Providing and fixing of Glass house and Bath room made with 12mm Tuffen glass including UPVC Frames complete job 9 Providing and fixing of Poly carbonate sheet of superior quality with thickness of 12mm, Fixing in UPVC frames for opening and shifting in summers complete job. 10 Providing and fixing pre-laminated flooring of approved brand like action Tesa, green ply or equivalent of 2mm thickness laid over foam sheetincluidng cost of carriage all complete. 11 Providing and fixing K-flex insulation to PPRs pipes in internal walls. 12 Providing and fixing of insulation for bath room pipe i.e, Ist layer of glass wool binded with wire mesh, K-flex, and cover with aluminium sheet all complete job. 13 Providing and fixing of electrical heat tape with thermostat all complete job. 30 watts.make Denfors or Comolex 14 Providing and fixing of insulation for Sintex i.e, Ist layer of glass wool binded with wire mesh, black polythene sheet, nitrile insulation sheet and cover with aluminium sheet all complete job. 15 Providing and fixing water Motor of 1.00 H.P of approved quality including fitting testing etc complete job. 16 Supplyand fixing of Floor heating cable of element conductor size 0.76 sqm to 0.3 sqm CUNI/SS- Simple cover, insulation XLPE/FEB/EFTE shielding aluminium foil for 100% coverage power outlet 06-30 watt/meter including laying fitting with 16 amp socket, switches, wiring and its necessary parts all complete job. 17 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 40mm OD(SDR-7.4)
