|
| 1 | BUILDING STRUCTURE |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 1800 MT WAREHOUSE QTY = 420.07SEED PROCESSING USINT QTY = 20.32 |
| 3 | Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto1.50m)ByMechanical Means 1800 MT WAREHOUSE QTY = 168.58SEED PROCESSING USINT QTY = 6.16 |
| 4 | ExcavationforfoundationinHardmurum andbouldersincludingremoving theexcavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed,dewatering,preparingthebedforthefoundationandnecessarybackfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means 1800 MT WAREHOUSE QTY = 168.58 SEED PROCESSING USINT QTY = 10.26 |
| 5 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 1800 MT WAREHOUSE QTY = 128.57 SEED PROCESSING USINT QTY = 19.77 |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneissmetalforbedblocks,foundationblocksand suchotheritems includingbailingoutwater, Steelcentering, formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfullyautomaticmicro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)1800 MT WAREHOUSE QTY = 0.91 SEED PROCESSING USINT QTY = 0.55 |
| 7 | Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesincement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincluding bailing out water manually , striking joints on un exposed faces and watering etc.complete.1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 1.00 |
| 8 | Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete.1800 MT WAREHOUSE QTY = 44.56 SEED PROCESSING USINT QTY = 18.43 |
| 9 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailingoutwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1800 MT WAREHOUSE QTY = 112.49 SEED PROCESSING USINT QTY = 2.20 |
| 10 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1800 MT WAREHOUSE QTY = 36.86 SEED PROCESSING USINT QTY = 10.04 |
| 11 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1800 MT WAREHOUSE QTY = 36.27 SEED PROCESSING USINT QTY = 4.07 |
| 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.1800 MT WAREHOUSE QTY = 19.24 SEED PROCESSING USINT QTY = 0.76 |
| 13 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. 1800 MT WAREHOUSE QTY = 31.29 SEED PROCESSING USINT QTY = 10.90 |
| 14 | Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)800 MT WAREHOUSE QTY = 1.08 SEED PROCESSING USINT QTY = 0.79 |
| 15 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade)1800 MT WAREHOUSE QTY = 1.98 SEED PROCESSING USINT QTY = 0.97 |
| 16 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 1.00 |
| 17 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 1800 MT WAREHOUSE QTY = 111.72 SEED PROCESSING USINT QTY = 27.02 |
| 18 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete.1800 MT WAREHOUSE QTY = 547.34SEED PROCESSING USINT QTY = 246.73 |
| 19 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.1800 MT WAREHOUSE QTY = 26.40SEED PROCESSING USINT QTY = 9.68 |
| 20 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 1800 MT WAREHOUSE QTY = 379.95 SEED PROCESSING USINT QTY = 159.61 |
| 21 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,toconcrete,bricksurface,inallpositionsincludingscaffoldingandcuring etc.complete. 1800 MT WAREHOUSE QTY = 13.14 SEED PROCESSING USINT QTY = 5.50 |
| 22 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.1800 MT WAREHOUSE QTY = 966.84 SEED PROCESSING USINT QTY = 421.53 |
| 23 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour tonew plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.800 MT WAREHOUSE QTY = 549.74SEED PROCESSING USINT QTY = 241.63 |
| 24 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)1800 MT WAREHOUSE QTY = 25.00 SEED PROCESSING USINT QTY = 7.50 |
| 25 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hotdipzinccoatingincluding fabricatingglazing withplain/obscuredglasspanes5mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.1800 MT WAREHOUSE QTY = 57.60 SEED PROCESSING USINT QTY = 7.92 |
| 26 | Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm.Layers including watering and compacting etc. complete.1800 MT WAREHOUSE QTY = 519.28 SEED PROCESSING USINT QTY = 17.91 |
| 27 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15cm to20cmincludingwateringandcompactionetc. complete.1800 MT WAREHOUSE QTY = 89.28SEED PROCESSING USINT QTY = 34.35 |
| 28 | Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete.1800 MT WAREHOUSE QTY = 120.05 SEED PROCESSING USINT QTY = 30.67 |
| 29 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete.1800 MT WAREHOUSE QTY = 66.26SEED PROCESSING USINT QTY = 12.04 |
| 30 | ProvidingandlayinginsitucementconcreteM20withtremixtreatmentfor100mm thicknessforflooringwithgroovecuttingof4mmwideand20mm deepwithnecessary refilling with bitumenetc. complete.1800 MT WAREHOUSE QTY = 946.61SEED PROCESSING USINT QTY = 0.00 |
| 31 | Providing and fixing M.S. Angle sill of 50 x 50 x 6mm as per details and drawing supported on necessary including fixing and fastening with painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. 1800 MT WAREHOUSE QTY = 0.41SEED PROCESSING USINT QTY = 0.22 |
| 32 | Providing and fixing M.S. Ladder as per details and drawing supported on necessary including fixing and fastening with painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. 1800 MT WAREHOUSE QTY = 8.00SEED PROCESSING USINT QTY = 6.00 |
| 33 | Providingandfixingcopperstrip25mmwideand3mmthickforlightening conductor including fixing withscrewsrequiredscaffolding etc.completeNote-Lighteningconductor and earthinf pits is not considered in this item1800 MT WAREHOUSE QTY = 1.00SEED PROCESSING USINT QTY = 0.00 |
| 34 | Providingandfixing90cmx60cmMarbleplateengraving10cm.heightletter,figures including painting the lefters/figures with approved colour and shade complete1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 0.00 |
| 35 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.1800 MT WAREHOUSE QTY = 10.00SEED PROCESSING USINT QTY = 0.00 |
| 36 | Providingexpansion jointsin R.C.C.framed structure(exteriorColumns)with plain premouldedfiller25mmthickand3mmthickalluminiumplate,holdfast,fixingT.W. battens on internal face, finishing etc. complete as directed.1800 MT WAREHOUSE QTY = 2.40SEED PROCESSING USINT QTY = 0.90 |
| 37 | Dismantling brick masonary in lime or cement mortar and stacking the material as directed with all leads, lifts etc.1800 MT WAREHOUSE QTY = 10.44SEED PROCESSING USINT QTY = 6.72 |
| 38 | Providingsoling (below footing) using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete.1800 MT WAREHOUSE QTY = 51.87SEED PROCESSING USINT QTY = 1.64 |
| 39 | ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper.1800 MT WAREHOUSE QTY = 946.61SEED PROCESSING USINT QTY = 0.00 |
| 40 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.Cmembersandbrickwork,ofapprovedqualityincludingfixing meshinpositionby necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.1800 MT WAREHOUSE QTY = 24.00SEED PROCESSING USINT QTY = 1.00 |
| 41 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 1.00 |
| 42 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code at Conduct As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 1.00 |
| 43 | ABC Types of Fires estinguishers are effective for all types of fire like class A,B & C types of fires as well as electrical fires and also ABC powder types (Stored Pressure Fire Exitinguisher, multipurpose uses & ISI, ISO and CE Certified Product and Multipurpose like ABC Type Fire extingusher As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 1.00 SEED PROCESSING USINT QTY = 1.00 |
| 44 | PEB StructureStructural Steel E-350 ( JSW make) |
| 45 | Structural Stee E-350- Supplying,fabricating, erecting and fixing in position of Steel structures at all elevations using fusion welding quality steel E-350 (Fe490) confirming to IS : 2062-2006. Rate shall include cost of cutting, welding, splic plates and packing plates, transporting, straightening, cleaing etc. As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 22.80 SEED PROCESSING USINT QTY = 2.03 |
| 46 | Structural Stee - Cold Formed Light gauged - Cold framed light gauged - Supplying fabricating and erecting of Cold Formed Light Gauge Structural steel members conforming to IS:801/IS:811 hot dip galvanised to IS:4759-96 including cutting, welding or bolting etc. As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 6.63SEED PROCESSING USINT QTY = 1.11 |
| 47 | Sheeting - PPGL 0.5 mm thick -Supply & Fixing of PPGI Sheets of 0.5 mm thick as shown in drawing or as directed by Engineer in charge with all necessary accessories1800 MT WAREHOUSE QTY = 11.71SEED PROCESSING USINT QTY = 0.78 |
| 48 | Roof Assesories - Supply & Fixing of 0.5 mm thick PPGL Roof accessories as CORNER FLASHING 1800 MT WAREHOUSE QTY = 88.00 SEED PROCESSING USINT QTY = 44.56 |
| 49 | CENTRER RIDGE 1800 MT WAREHOUSE QTY = 45.08 SEED PROCESSING USINT QTY = 15.68 |
| 50 | GABLE FLASHING 1800 MT WAREHOUSE QTY = 66.00 SEED PROCESSING USINT QTY = 44.56 |
| 51 | Roof Gutter -Roof gutter (Assumed Girth - 600 mm) PPG 0.5 mm thick- Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends, all fixing accessories, drop ends etc. at the elevation levels & height including aligning, levelling, providing & fixing bolts, nuts, washer etc. conforming to latest specification including straightening, cutting,welding, bending to As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 90.16SEED PROCESSING USINT QTY = 31.36 |
| 52 | Downtake Pipe - Providing & fixing of the rain water down take pipe of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 Square cm per 70 to 80 square decimeter of roof area drained.No spout shall be less than 80 mm in dia. The spacing of spouts shall be arranged to suit the position of openings in As directed by Engineer in charge 1800 MT WAREHOUSE QTY = 28.00 SEED PROCESSING USINT QTY = 24.00 |
| 53 | Polycarbonate Sheet -Supply & fixing of 2 mm thick polycarbonate sheets as per drawing & as directed by Engineer in charges 1800 MT WAREHOUSE QTY = 36.00 SEED PROCESSING USINT QTY = 25.20 |
| 54 | Providing & fixing wind operated Turbo Ventilator system (24 inch dia) over existing roof including cutting, of sheet, proper fixing in position to true line and level with all fixture & fastening, Providing 0.8 mm thick FRP sheet for covering area between roof and fan so as to provide waterproof joint with approved water proofing compound making good the roof surface including cleaning etc. complete (General application for all types) 1800 MT WAREHOUSE QTY = 12.00SEED PROCESSING USINT QTY = 4.00 |
| 55 | ELECTRIFICATION |
| 56 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 57 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 58 | Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR |
| 59 | Supplying & erecting mains PVC unarmoured Cable 1100Volt grade ISI mark 3 Core / 2.5 sqmm standard / solid copper complete |
| 60 | Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S.P.M.C. with industrial two pin plug socket 10 A and 3 Pin plug top 10A with top cover necessary etc. |
| 61 | Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 Core 1.5 sqmm standard / solid copper erected on wall with G.I. etc. |
| 62 | Supplying & erecting 10-12 W, 230V Integral type LED Lamp suitable for B-22/E-27 base as directed by Engineer in charges |
| 63 | Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, etc. |
| 64 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I.pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB |
| 65 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP |
| 66 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP |
| 67 | Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 68 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 69 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete |
| 70 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 |
| 71 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thicknesssurface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 72 | Supplying and erecting ISI mark GI pipe 25 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 73 | Supplying and erecting ISI mark GI pipe 25 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 74 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete |
| 75 | Supplying & erecting 18 guage M.S. Box Powder coated (4\"x4\") 3 way for mains connection As directed by Engineer incharge |
| 76 | Supplying & erecting Siemes type brass cable glands for 3 to 4 core 6 sq. cm / 2 to 4 core 10 Sq.mm for XLPE armoured Cable as per specification No. CB-GL as directed by Engineer in charge |
| 77 | Supplying shockproof type hand lamp with lamp holder, bulb / lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top As directed by Engineer in charge |
| 78 | Point wiring for independent plug in 30 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade conner wire flush type switch earthing and required etc. |
| 79 | Supplying & erecting street light bracket made from 25 mm dia B Class G. I. Pipe 0.6 mm in length along with pole as directed by Engineer in charge |
| 80 | Supplying & erecting mains with 2 x 2.5 Sq.mm standard as directed by engineer in charge |
| 81 | Supplying & erecting mains with 2 x 4.00 Sq.mm standard copper PVC insulated wire with 2 x 1.5 sq.mm copper as directed by engineer in charge |
| 82 | Supplying, installation, testing and commissioning of 220/250 Volts,single phase, 50 Hz Siren of 3.25 km range (Diametrical), horizontal double mounting type of 0.5 HP 6000 RPM on C. C. foundation complete as per specification no. SRN-AS/SM |
| 83 | Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification |
| 84 | Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E-27 base. |
| 85 | Supplying and erecting T8 Fluorescent tube day light 1200mm, 36 W |
| 86 | Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete &compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. |
| 87 | Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 88 | Supplying and fixing wire mesh (Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jali cover shall be made from good quality G.I. wire mesh size 25 x 25 (mm) and made up of 14 SWG G.I. wire with side / supporting MS strips of suitable size |
| 89 | Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. |
| 90 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I.pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB |
| 91 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. |
| 92 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. |
| 93 | SW - IV INTERNAL BITUMINOUS ROAD Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 94 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 95 | Excavation for catch / side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 96 | Watering and compacting of embankment formed of materials obtained from the road cutting, departmental land or other sources within a lead of 50 m. after laying them in layers of 20cm to 30cm with 3% camber and design etc. |
| 97 | Compacting the Hard Murum / Kankar for all widths (200 mm loose) with roller including necessary artificial watering complete (By Vibratory Roller) |
| 98 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). |
| 99 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements)a)40 mm Metal, By breaking Boulders (Hand broken). |
| 100 | Supplying Hard Murum / Kankar at the road side, including conveying and stacking etc. |
| 101 | Supplying soft murum at the road site, including conveying and stacking complete. |
| 102 | Spreading80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 103 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 104 | Compacting the Hard Murum / Kankar for all widths (200 mm loose) with roller including necessary artificial watering complete (By Vibratory Roller) |
| 105 | Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 106 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 107 | Providing and constructing 50 mm. thick ModifiedPenetration Macadam (MPM)road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting withstatic roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506etc. complete.Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 108 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING Batch mix type hot mix plant with SCADA, Paver and Vibratory roller( over BT Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 109 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m,preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 110 | Providing and fixing stream lined M-20 grade RCC guard stone including mild steel bar reinforcement etc. complete. |
| 111 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 112 | ROYALTY CHARGES |
| 113 | Royalty for Sand |
| 114 | Royalty for murum and Other material |
| 115 | QUALITY CONTROL & LAB TESTING |
| 116 | M20 CONCRETE: Mix Design with all tests on basic materials |
| 117 | M20 CONCRETE: Concrete cube compressive strength |
| 118 | M10 CONCRETE: Concrete cube Test |
| 119 | M20 CONCRETE: Mix Design with all tests on basic materials |
| 120 | M20 CONCRETE: Concrete cube compressive strength (M15 & M30 both) |
| 121 | BRICKS :Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks),Efflorescence (Set of 5 Bricks) |
| 122 | TMT STEEL :Yield Stress, Ultimate Tensile Stress, Elongation, Weight per running meter. |
| 123 | Sand :- i) Fineness Modulus, II) Silt content |
| 124 | Murum :- ii) Atterberg Limit |
| 125 | iii) Density of compacted layer |
| 126 | iv) Proctor Test |
| 127 | Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess |
| 128 | Carpet Sealcoat |
| 129 | Grade 1 & Grade 2 Murum ( Required test) |
| 130 | Penetration, softnening point, flash and fire point |
| 131 | specific Gravity |
| 132 | Extraction Test.(Bituminous mix) |
| 133 | Rubble |
| 134 | Combined Flakiness & Elongation of single metal |
| 135 | Crushing Value/Compressive Strength, Water Absorption & Specific Gravity, |
| 136 | Metal Test i) AIV ii) Gradintion iii) water Absorbation |
| 137 | Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct |
