Tender For Annual Maintenance Of Roads In Sector-4 And 5, 16, 32, 33 And Sector-4/T-Nagar U.E. Karnal. `Providing And Laying Of Busg, Pc, Tack Coat, Thermoplastic Pain, Painting On Kerb In Sector-4-T/Nagar, 4And5 Complete In All Respect And All Other Wor, Karnal-Haryana
TDR : 45707461
Tender Notice
BOQ
Expired
Karnal
Haryana
Tender For Annual Maintenance Of Roads In Sector-4 And 5, 16, 32, 33 And Sector-4/T-Nagar U.E. Karnal. `Providing And Laying Of Busg, Pc, Tack Coat, Thermoplastic Pain, Painting On Kerb In Sector-4-T/Nagar, 4And5 Complete In All Respect And All Other Wor
Name of Work: A/Mtc. of Roads in Sector-4 and 5, 16, 32, 33 and Sector-4/T-Nagar U.E. Karnal. `Providing and Laying of BUSG, PC, Tack Coat, Thermoplastic Pain, Painting on Kerb in Sector-4-T/Nagar, 4and5 complete in all respect and all other works contingent thereto` A/C Rs 11.44 Lacs
Sl. No.
Item Description
1
[11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer
2
[11.73.2]Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer`s specifications including appropriate priming coat, preparation of surface, etc. complete. 2. On concrete work
3
[17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications
4
[17.29]Built-up-Spray Grout Providing, laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a Base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm
5
[17.34.2]Close Graded Premix Surfacing/Mixed Seal Surfacing Surfacing 20 mm thickness (Type A) with VG-30 2. Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness Type A composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than75 tonne per hour, with bituminous binder VG - 10@ 2.2kg per sqm, laid with Paver Finisher Mechanical androlling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 508 of MORT&H specifications.
6
[17.36.3]Seal Coat 3. Type B with VG - 10 bituminous binderProviding and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.
7
[34.26]Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
