Open Gym & Bal Vatika PMKSY-2.0 (Newai) in VillageBeed Bharthala, Kiwara, Shri gopalpura, Kaririya. - SURFING BOARD Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1.(The cement concrete and excavation work shall be paid separately). (Open Gym at village Bharthala and Kiwada) 3 CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB C Class G.I. Pipe. The footrests shall be made frem Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in- charge to fullfil. (The cement concrete and excavation work shall be paid separately). (Open Gym at village Bharthala and Kiwada) 4 SEATED PULLER Providing and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with MS. round base plate atleast 250 mm & 10mm thick. The handle frame shall be minimum of 32NB C class GL. pipe. The seat frame minimum of 32NB C class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shallbe paid separately). (Open Gym at village Bharthala and Kiwada) 5 LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made fromG.l. pipe minimum of 80NB C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD andof M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick.Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5.(The cement concrete and excavation work shall be paid separately). (Open Gym at village Bharthala and Kiwada) 6 CHEST CUM SHOULDER PRESS Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000 mm Length) x 710 mm (Width) x2200 mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. Pipe minimum of 80NB C class welded with M.S. round base pate atleast 0250 mm & 10 mm thick. The seats and Back rest to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330mm X300 mm X2 mum thickness. Closing Cap shall be made up of high quality Fiber reinforced Plastic material. High tensile stell with galvanized nuts &bolts shall be used for assembly. The powder coating shall be done with pure polyester powders from Ackszonobe/Berger/Nerolac paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, undr the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Desing/ Photo is as per enclosed Photo no. 11 ( The cement concretce and exdcavation work shall ber paid separaterly.) (Open Gym at village Bharthala and Kiwada) 7 STANDING & SEATING TWISTER Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from C class G.I. pipe. The handle frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from C class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate. Open gym at village bharthala and kiwada 8 PUSH UP BARS Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately). Open gym at village bharthala and kiwada 9 SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer- in-charge to fullfil the functional requirement. The indicative Design/Photo isas per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).(Open Gym at village Bharthala and Kiwada) 10 FOR SHEATER MRG Providing and fixing of For Seater MRG swing of size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/Frame of 50 NBshall be made from C Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Q250 mm& 10mm thickness. The bottom frame of 32 NB shall be made from C class G.I. pipe. The foundation should be used fror fixing is a structure and shall be made from center pipe og G.I. of 50 NB C class welded with M.S.round plate of Q250mm & 10mm thick . Main pipe shall be supported with 25mm X25mm M.S. angles of 3 mm thickness and 20 mm X40mm CRC square pipes of 3 mm Thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic Material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concretc and excavation work shall be paid separately). (Bal vatika at village Kaririya & Shrigopalpura) 11 CIRCULAR SWING FOUR SEATER Providing and fixing of Circular swing four seater of size 6.0 X5.25X5.0 Feet fabricated with a Center Pipe/Frame of 65 Nbshal be made from C Class G.I. Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Q250 mm & 10 mm thickness. The bottom frame of 32 NB shall be made form C Class G.I. pipe. The handle frame of 25 NB Shal be made form C class G.I. pipe. The foundation should be used for fixing is astrucuture and shall be made from center pipe of G.I. of 65 NB C class welder with M.S. round plate of Q250 mm & 10 mm thick. Main pipe shall be supported with 25 mm X25mm M.S. angles of 3 mm thickness and 20 mm X40mm CRC square pipes of 3 mm thickness. Closting Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvnized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approveal of Engineer-in-charge regarding material, shape of equipment, colour (of metal,seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). (Bal vatika at village Kaririya & Shrigopalpura) 12 FOUR SEATERSEE SAW Providing and fixing of FOUR SEATER SEE SAW of size 5.5 X6.25 X2.5 Feet fabricated with a Center Pipe/ Frame of 50 NB Shall be made from C Class G.I. material. The bottom shall be welded with support of M.S. round plate of Q250 mm & 10 mm thickness. The bottom frame of 32 NB Shall be made from C class G.I. pipe. The handle frame of 25 NB shall be made from C Class G.I. pipe. The foundation should be used fro fixing is a strucuture and shall be madefrom center pipe of G.I. of 50 NB C: class welded with M.S. round plate of Q250 mm & 10 mm thick. Main pipe shall be supported with 25 mm X25 mmM.S. angles of 3 mm thickness and 20 mm X40mm CRC squate pipes of 3 mm thickness and 20 mm X40mm CRC square pipes of 3mm thickness. Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembley. The powder coating shall be done with Pure Polyester powders from Ackzonobler or Berger Paints with 60 to 70 micron thickness, all complete as per drawing. design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour ( of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). (Bal vatika at village Kaririya & Shrigopalpura) 13 HORSE/DUCK/RABET SPRING RIDER Providing and fixing of HORSE SPRINH RIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of 40 NB Shall be made from C Class G.I. material and FRP Material and FRP Material The bottom shall be welded with support of M.S. round plate of Q250 mm&10mm thickness. The bottom frame of 32 NB shall be made from C class G.I. pipe. The handle frame of 25 NB shall be made from C class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40 NBC class welded with M.S. round plate of Q250 & 10 mm Thcik. Main pipe shall be supported with 25 mm X25mm M.S. angles of 3 mm thickness and 20 mm X40mm CRC square pipes of 3 mm thickness. Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. all completer as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of equipment, colour (of metal,seat and pedal), and fixing of equipment etc. (The cement concrete and excabaion work shall be paid separately) (Bal vatika at village Kaririya & Shrigopalpura) 16 Display board of stone on work site size. 2.00 *2.50 feet and hight 4.00 feet above ground level & Work site Fhotograph (4x6)
