Design, Fabrication And Erection Of Ancillary Appurtenances For Municipal Foundry.- 1 Excavation for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/ marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts upto 1.5M 2 Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge. 3 Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size 4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in 5 Providing and applying 20 mm thick external sand faced cement plaster upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge. 6 Providing and laysing ready mix concrete M20 grade cement for Foundation for Footing 7 Providing and laysing ready mix concrete M20 grade cement for Column 8 Providing and fixing in position steel bars reinforcement of various diameters for R.C.C. pile, pile caps, footings,raft,retaining wall,shear wall, lift wall, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, 9 Lintels, beams, plinth beams, girders, floor beam, coping 10 M-20 grade plain cement concrete (cement content considered @ 260 kg/cum). 11 Providing detailing and fabricating desired location with using hot rolled section and MS plate etc 12 Providing JCB and Hydra to shift old scrap material from site to another location inside MWS 13 Work of cleaning/refurbish the complete material available at MWS received from Covid center & erect/fiixing the complete frame structure of post I beam /runner/purlin for the OHD protective housing of approx size 87 x 32 with center height 25 along with painting on complete frame structure. 14 Work of cleaning/refurbishthe powder coated profile sheet of .5mm thickavailable at MWS received from Covid centre & erect/fixingthe OHD protective housing of approx size 90 x 35;with center height 25
