|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(a) Group C |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(a) 3 x 2.5 sq. mm |
| 3 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.(a) 20 mm |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 5 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 6 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 7 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 8 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 9 | (a) 5/6 amps switch |
| 10 | (b) 3 pin 5/6 A socket outlet |
| 11 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required |
| 12 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor notless than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 13 | Supplying, installation,testing and commissioning of 1200 mm retrofit LED tube with suitable boxtype batten on wall/ ceiling/ truss with suitable fitting arrangements to terminate the metal conduit wiring with check nut to the fittings including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthingetc as required. (non compact type) (ISI certified) |
| 14 | Supplying, fixing, testing and commissioning of 1200 mm 20W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver with efficacy of 100 lumens/W byreplacing damaged spares of the existing fitting etc . as required(ISI certified) |
| 15 | Supplying, installation, testing & commissioning of 36W 2 x 2 ft square typerecess mounted LED panel with PDC aluminum housing and hightranslucent frosted plastic diffuser makes it a robust Luminaire on ceiling surface including making connections from the existing point etc as required.(ISI certified) |
| 16 | Supplying, installation, testing & commissioning of 36W 2 x 2 ft square typeSurface mounted LED panel with PDC aluminum housing and hightranslucent frosted plastic diffuser makes it a robust Luminaire on ceiling surface including making connections from the existing point etc as required.(ISI certified) |
| 17 | Supplying, installation, testing & commissioning of 70W LED Street light fitting made up of pressure die cast aluminium housing with IP 66,IK 07, LEDs with lumen efficacy of ≥ 110 lm/W,colour temp 6500 K,THD( %) < 10 on the existing bracket on wall/truss of the godown/post, making connections from the existing point / loop in loop out box to fittings through bracket with 3 core 1 sq mm copper conductor round flexible cable etc. as required. |
| 18 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 19 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs as outgoing and MCCB as incomer (but without MCBs and incomer (MCCB)) as required.(a) 8 way (4 + 24), Double door |
| 20 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100 A, 16 KA,TPMCCB |
| 21 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | (a) Single pole |
| 23 | (b) Tripple pole |
| 24 | Supplying and fixing of 32 mm dia X 1.00 meter long G.I. pipe (medium class) bracket for mounting of LEDstreet light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 25 | Supplying and fixing hot press molded SMC box of size 200x150x95 mm on wall/ truss with suitable clamps including providing and fixing suitable 3 way connector, 6A SP MCB and din bar for fixing MCBs terminating the incoming and out going cables /wires (but with out end termination glands) making connections etc. as required |
| 26 | Supplying of PVC insulated, PVC sheathed / XLPE aluminium conductor armoured under groundpower cable of 1.1 KV gradeconforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes.(a) 3 x 6 sq mm |
| 27 | Laying and fixing of one number ofPVC insulated and PVC sheathed/ XLPE armoured U Gpower cable of 1.1 KV grade of following sizes on wall surface/truss(or in recess of wall/floor by cutting the surface and making good the same) as required.(a) Up to 35 sq.mm (clamped with 1mm thick saddle) |
| 28 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required(a) 2 x 10 sq. mm (19 mm) |
| 29 | Credit items to be taken out |
| 30 | (a) Dismantled copper insulated wire |
| 31 | (b) Dismantled ceiling fans |
| 32 | (c) Dismantled street lights, panel lights, Flood lights etc |
| 33 | (d) Dismantled Tube light battens/ fittings, DBs, SBs, GI wire etc. |
