|
| 1 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. excluding Royallity. Wherever applicable for small work or Abadi area. (Where machine con not reach/move) |
| 2 | Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1infoundations andunderfloors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 3 | R.C.C work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials,labour,tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(AS PER PWD SOR 2020/283 a .) |
| 4 | Steel reinforcement for R.C.C work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars DSR 2023 ITEM N.5.22.1 |
| 5 | First class Brick Workin 1:4 onecement & four Coarse sand of 2.20 F.M. mortar. in foundation and plinthincludingsupplyofall materials, labour and T&P etc. requried for proper completion of the work. |
| 6 | 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM ) |
| 7 | Finishing wall with water proof cement paint of approved make and quality on new wood with twocoat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.Same in item no. (660) but for each coat of water proof cement paint after the first two coat to givean even shade. (Snowcem) |
| 8 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. |
| 9 | Fencing with R.C.C. post placed at required distance, embedded incement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one sideonly, provided with horizontal lines and two diagonals of barbed wireweighing 9.38 kg per 100 metres (minimum), between the two postsfitted and fixed with G.I. staples on wooden plugs or G.I. binding wiretied to 6 mm bar nibs fixed while casting the post (cost of R.C.C.posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wireused.16.17.1 With G.I. barbed wire |
| 10 | R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete worksin foundation to be paid separately). |
| 11 | S/S of 22.4 to 53mm gauge stone ballast with stacking for measurment etc. all complete as per the direction of Engineer in charge (AS PER PWD SOR 2020 RMR) |
| 12 | Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405 |
| 13 | Supply & laying 80 mm thick Precase cement concrete ishape interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 200X(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacturered from rubber moulds M-30 GRADE AS PER SOR 2022. |
| 14 | CementConcretewith2cm.gaugestone grit insteadof 4 cm. gauge stoneballast,coarsesand&cementinthe proportion of 4:2:1 including supply of all materials,labour,Tools&plantsetc.Required for proper completion of the work. |
| 15 | 2.5 cm (1\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 16 | Painting or varnishing with valsper or other approved high grade enamelor superior synthetic clean varnish complete one coat overpreviouslypaintedsurfaceincluding supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISi no. 105/106/133-1950.Asinitem(647)abovebutforevery subsequent coat on previously treated |
| 17 | GST |
