Machinery and Tools, Bearings Bushings And Gears, Bearings-Andhra Pradesh

Taper Roller bearing to suit Godrej Part No. MH.55300006 forGodrej Fork Lift Truck. Model No. GX-300D (Godrej AuthorisedDealer Certificate should be enclosed).Tapper Roller Bearing to suit Godrej Part No. MH.54099649for Godrej Fork Lift Truck, Model No. GX-300D (GodrejAuthorised Dealer certificate should be enclosed.).Brake Assly (02064297) to suit Godrej Part No. MH.02039723for Godrej Fork Lift Truck, Model No. GX-300D (Godrejauthorised dealer certificate should be enclosed).Clutch Disc (Finger Clutch) to suit Godrej Part No.MH.38700263 for Godrej Fork Lift Truck, Model no. GX-300D(Godrej Authorised Dealer Certificate should be enclosed).Pivot Pin for Steering Axle to suit Godrej Part No.MH.02242060 for Godrej Fork Lift Truck, Model N9. GX-300D(Godrej authorised dealer certificate should be enclosed).Drive Plate-F-C (785339600) to suit Godrej Part No.MH.38700179 for Godrej Fork Lift Truck. Model No. GX-300D(Godrej authorised dealer certificate should be enclosed).Thrust Bearing to suit Godrej Part No. MH. 54101999 forGodrej Fork Lift Truck, Model No. GX-300D (Godrej authoriseddealer certificate should be enclosed).Brake Drum for drive Axle to suit Godrej Part No.MH.02000024 for Godrej Fork Lift Truck. Model No.GX-300D(Godrej Authorised Dealer Certificate should be enclosed).Bush Link LH and RH to suit Godrej Part No. MH.02251150 forGodrej Fork Lift Truck, Model No. GX-300D (Godrej authoriseddealer cerificate should be enclosed).PIN for Steering Kunckle to suit Godrej Part No. MH.02125181 for Godrej Fork Lift Truck, Model No. GX-300D(Godrej Authorised Dealer Certificate should be enclosed).Turbine Flow Meter with hand held electronic flow readingunit with calibration certificate from NABL accreditedagency. Make: Rockwin or Flowstar or similar.Specification(tecinical details for Flow Metere):-(1) FlowMeter type:Turbine (2) Model: TFM 1015F of Rockwin (3)Flow:upto 66 liters/minute.(4)Operating Temperature: 120Deg.C.(5) Max.pressure:According to Flange Rating.(6)Maerials:(a)Body:SS316(b)Flanges:SS316(c)Rotor:SS430(d)Bearings:Tungsten Carbide. (7)End connections: 3/4ANSI 150#RF (8)Linearity:+/- 1% of reading (9) P O Sensor:Standard Magnetic (10) Installation: Horizontal. (11) Fluid:Hydraulic Oil. HAND HELD ELECTONIC FLOW READING UNIT:-(1)Model: HH9000 of Rockwin. (2) Type: Portable-Hand Held.(3) Indication: 3 or 4 digit LCD. (4) Input: Pulses fromflow meter. (5) Power Supply: Self powered by internalBatteries.Induction Electric Motor: 3HP, 3 Phase RPM 1440. Make:Crompton or any standard make. Gear Pump : 110 Ltrs/Minute,outlet: 3/4. Model; Rover, Model No. REG 110 or similar.Assembled with suitable coupling on Sturdy base plate.Cover complete for side bearer to ICF Drg. No. ICF/STD-1-1-007 Col.I, alt-c/Nil.Brake ferrodas liner owen with Brass material size 12mm x 75mm for use of 75 ton EOT crane.Brake ferrodas liner owen with Brass material size 12 mm x125 mm for use of 15 ton EOT crane.Brake Ferrodas liner owen with brass material size 12 mm x100 mm for the use of 7.5 ton EOT crane.Scrubber pump 1.5 K.w-2HP, 2880 RPM (Kirloskar makeCentrifugal mono block) size 50mm suction and delivery 40mm.phase, 415 V model KDS/GMC-225 make Kirloskar for the useof Incinerator M&P No:1880.Rubber tube size:10.00 x 20. Make:CEAT/MRF to suit TataLorry.Bearing NTN-P-211 consists of block (pillow) with bearing ofmake NTN/KOYO/FAG for the use of dyno drives of elec M&P.Bearing NTN-P-208 consist of block (pillow) with bearing ofmake NTN/KOYO/FAG for the use of dyno drives of elec.M&P.Filteration Pump 1.5 KW/2HP, 2880rmp (kirloskar makecentrifugal mono block)Size 50 mm suction and delivery 40mmphase, 415 V model KDS/GMC-225 make kirloskar for the useof incinator M&P no. 1880.Double row spherical roller bearing No: 22212E 1 AM size 60110 x 28mm. Make: SKF/KOYO/FAG for the use of 15 TonEOT/Crane. Authorised Dealer Certificate to be enclosed.SAE 100 R 1-1/4 inch rubber hydraulic ho

Refer document

Refer document

Refer document