|
| 1 | REPAIREING AND MAINTANCE MATERIALS |
| 2 | Supplying and erecting Street light bracket for erection ofSingle fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. |
| 3 | Supplying and erecting Insulated D.P. switch surface type/flush type 32A 240Vwith indicator lamp & fuse |
| 4 | SupplyingH.C. pattern porcelain fuse bridge swith base & HC type fuse links240V 32A |
| 5 | Supplying and erecting Programmable Digital AlmanacTimer Microcontroller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively |
| 6 | Supplying PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (1-3-29) |
| 7 | Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink 2-9-5 |
| 8 | Supplying and erectingLED street light fitting suitable for 90 w LED Street Light, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink 2-9-5 |
| 9 | Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2 |
| 10 | Supplying & LayingPVC armoured cable 4core 10 sq mm7-1-15 |
| 11 | Supplying & LayingPVC armoured cable 4core 16 sq mm |
| 12 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) 5-3-3 |
| 13 | Supplying, erecting & marking DPMCB 6 A to 32 A Bseries (for lighting) 5-3-7 |
| 14 | Supplying, erecting & marking TPMCB 6 A to 32Amp in provided distribution board 5-3-14 |
| 15 | Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board 5-3-17 |
| 16 | Supplying & erecting crimping type Aluminium lugs for cable upto 16 sq mm complete 7-10-1 |
| 17 | Supplying & erecting crimping type Coper lugs for cable upto 1.5 To 6sq mm complete… |
| 18 | Supplying and erecting mains with ISI mark WP2 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated PVC sheathed wires on G.I. bearer wire No. 8 SWG 1-4-3 |
| 19 | Supplying and erecting mains with ISI mark WP2 x 10.00 sq mm. 1100 V. Grade aluminium PVC insulated PVC sheathed wires on G.I. bearer wire |
| 20 | 25 Amp, 32 Amp Three Phase L/T Contactor |
| 21 | Insulation Tape |
| 22 | Water Proof Tape |
| 23 | Street Light Pole Box FRP |
| 24 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes(DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 25 | Supply &Fixing of Shakle Hardware with Nut Bolt |
| 26 | 5-3-29Supplying, fixing and commissioning MCB type change over switch 2 pole, 63 A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS |
| 27 | supplying and erecting ICDP Switch 10A to 63A |
| 28 | Cable Joint Kit for armoured cable 20 upto 120Sq. MM Cable |
| 29 | GI Tar for service wire support with bobine. |
| 30 | Kit kat Type fuse 16A 32A 63A 120A |
| 31 | Taparia Tester |
| 32 | Spaner Set |
| 33 | Control Panel HRC Fuse |
| 34 | Cores Arm Clamps |
| 35 | L&T 1 phase contactor |
| 36 | 10MM ALLUMINIAM LUGS |
| 37 | 16MM ALLUMINIAM LUGS |
