|
| 1 | A) ConstructionofCompoundWallfor Anandi Ganesh Trust, Akluj.at gat No. Ananadnagar ( Akluj ). Tal Malshiras Dist. Solapur Excavation for foundation in earth, soil of all types, sand, graveland soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed forthe foundation and necessary back filling,ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be providedfinishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etccomplete. With natural sand/V.S.I. quality Artificial Sand |
| 4 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directedincluding centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcementand structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 9 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 10 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 11 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 12 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 13 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 14 | Providingf and fixing information sign board os size 1.20 x 0.90 M. prepared on 16 guage M.S. sheet with horizontal bracting of M.S. flat os size 25 x 6 mm including painting with one coat of zinc cromzte primer and two coatsoil painting, including two number of M.S. angle iron post of size 50 x50 x 6 mm of 2.70 m Long, including conveying, all taxes fixing in ground with cement concrete 1:4:8 block of 45 x45x 45 cm. size as directed by Engineer in charges eetc. complete. |
| 15 | Quality Control Testing Charges |
| 16 | Add GST |
| 17 | B) Constructionof Parking Area For Anandi Ganesh Trust, Akluj.at Ga No.Anandnagar ( Akluj ). Tal. Malshiras. Dist. Solapur. Scarifying the existing granular road surface to a depth of 50 mm and disposal ofscarified material within all lifts and leads upto 1000 metres. |
| 18 | Providing, laying, spreading and compacting stone aggregates ofspecific sizes to water bound macadam specification includingspreading in uniform thickness, hand packing to proper grade andcamber, applying and brooming requisite type of screening/ bindingMaterials to fill up the interstices of coarse aggregate, watering andcompacting with vibratory roller to the required density. ByMechanical Means -Grading II (Using Screening Type B (11.2 mm)Aggregate) Spec : MORTH - 404 DSR 2022-23P. No.33*3.20 |
| 19 | Providing and laying in situ cement concrete M -20 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) withcoarse and fine aggregates( natural sand / VSI grade finely washed crushed sand) etc. complete |
| 20 | Providingf and fixing information sign board os size 1.20 x 0.90 M. prepared on 16 guage M.S. sheet with horizontal bracting of M.S. flat os size 25 x 6 mm including painting with one coat of zinc cromzte primer and two coatsoil painting, including two number of M.S. angle iron post of size 50 x50 x 6 mm of 2.70 m Long, including conveying, all taxes fixing in ground with cement concrete 1:4:8 block of 45 x45x 45 cm. size as directed by Engineer in charges eetc. complete. |
| 21 | Quality Control Charges |
| 22 | Add GST |
| 23 | C) ConstructionofToilet Block for Anandi Ganesh Trust, Akluj.at gat No.Ananadnagar ( Akluj ). Tal Malshiras Dist. Solapur Excavation for foundation in earth, soil of all types, sand, graveland soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed forthe foundation and necessary back filling,ramming,wateringincluding shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 24 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) |
| 25 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be providedfinishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etccomplete. With natural sand/V.S.I. quality Artificial Sand |
| 26 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 27 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 28 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directedincluding centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcementand structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand |
| 29 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs andlandings as per detailed designs and drawings includingcentering, formwork, cover blocks, laying/pumping,compactionfinishing the formed surfaces with cement morta1:3 of sufficient minimum thickness to give a smooth and evensurface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 30 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 31 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete |
| 32 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 33 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 34 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 35 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panelof hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles railstop ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside thehollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement.The inner panel shall be laminated with 5mm thick termite proof waterproof plain/prelam PVC sheet using solvent cement on the both sides of the panel includingstainless steel fixtures and fastening etc. Complete as per direction of Engineerincharge, manufacturers specification and drawing. |
| 36 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 37 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 38 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 39 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 40 | Providing 25 mm to 30 mm thickpartition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish |
| 41 | Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 42 | Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 43 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 44 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 45 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 46 | Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 47 | Providing and fixing Orrissa type white glazed eathenware 575mm water closet pan including S Trap with earthenware foot rests,cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc complete |
| 48 | Providing and fixing European type Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 49 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 50 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 51 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 52 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 53 | Providing, laying and fixing P.V.C. pipe of 100 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 54 | Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make,manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. |
| 55 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) |
| 56 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 57 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 58 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 59 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 60 | Providingf and fixing information sign board os size 1.20 x 0.90 M. prepared on 16 guage M.S. sheet with horizontal bracting of M.S. flat os size 25 x 6 mm including painting with one coat of zinc cromzte primer and two coatsoil painting, including two number of M.S. angle iron post of size 50 x50 x 6 mm of 2.70 m Long, including conveying, all taxes fixing in ground with cement concrete 1:4:8 block of 45 x45x 45 cm. size as directed by Engineer in charges eetc. complete. |
| 61 | Quality Control Testing Charges |
| 62 | Royalty Charges Other Materials |
| 63 | Add GST |
| 64 | D) Constructionof Yatri Niwas , Kitchen & Dinning Hallfor Anandi Ganesh Trust, Aklujat gat No. Ananadnagar ( Akluj ). Tal Malshiras Dist. Solapur Excavation for foundation in earth, soil of all types, sand, graveland soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed forthe foundation and necessary back filling,ramming,wateringincluding shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 65 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) |
| 66 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be providedfinishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etccomplete. With natural sand/V.S.I. quality Artificial Sand |
| 67 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 68 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 69 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directedincluding centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcementand structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand |
| 70 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs andlandings as per detailed designs and drawings includingcentering, formwork, cover blocks, laying/pumping,compactionfinishing the formed surfaces with cement morta1:3 of sufficient minimum thickness to give a smooth and evensurface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 71 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 72 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 73 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 74 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 75 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 76 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 77 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 78 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with windowframe bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearingbottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 79 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with out hotdipzinc coating including fabricating glazing wthplain /obscured glass panes 5mm thick and approvedtypeandqualityandironoxidizedfixturesandfastening oil paint 2 coats etc. complete. |
| 80 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 81 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 82 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 83 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. |
| 84 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 85 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaningetc. complete. |
| 86 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 87 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 88 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm dia meter and 1.5mm thick at top, 40mm diameter and 1.5mm thick verticals up ports spacedat1.5mcentertocenterand8mmthicktoughenedglassincludingfabricating,fixtures,errecting,necessarywelding,grinding,finishing,buffingtostainless steel pipe etc. complete |
| 89 | Providingf and fixing information sign board os size 1.20 x 0.90 M. prepared on 16 guage M.S. sheet with horizontal bracting of M.S. flat os size 25 x 6 mm including painting with one coat of zinc cromzte primer and two coatsoil painting, including two number of M.S. angle iron post of size 50 x50 x 6 mm of 2.70 m Long, including conveying, all taxes fixing in ground with cement concrete 1:4:8 block of 45 x45x 45 cm. size as directed by Engineer in charges eetc. complete. |
| 90 | Quality Control Testing Charges |
| 91 | Royalty Charges Other Materials |
| 92 | Add GST |
