Tender For Selection Of Agency For Execution Of Infrastructural Development Of Lighthouse School Complex (Lsc)-Government High School (Ghs) Noklak Under Noklak District., Noklak-Nagaland

TDR : 45623186

Tender Notice
Corrigendum Details
BOQ

Expired

Noklak , Nagaland

Tender Brief : Corrigendum : Tender For Selection Of Agency For Execution Of Infrastructural Development Of Lighthouse School Complex (Lsc)-Government High School (Ghs) Noklak Under Noklak District.

Document Fees
₹ 15000 /-

EMD
₹ 1389000.0 /-

Tender Value
₹ 13.89 Crore /-

Submission Date
08-11-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	23-10-2024	Corrigendum for LSC GHS Noklak	Fee	08-11-2024

Name of Work: Infrastructural Development of Lighthouse School Complex (LSC)- CONSTRUCTION OFGOVERNMENT HIGH SCHOOL NOKLAK AT NOKLAK VILLAGE

Sl. No.	Item Description
1	ACADEMIC GROUND FLOOR CIVIL
2	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
3	All kind of Soil
4	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
5	Ordinary Rock
6	Diluting and Injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)
7	Treatment of soil under existing floors using.chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor.
8	With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
9	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
10	Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:
11	1:4 (1 cement: 4 coarse sand)
12	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
13	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
14	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:
15	Cement mortar 1:6 (1 cement : 6 coarse sand)
16	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
17	All works upto Plinth level
18	All works above Plinth level upto floor V level
19	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).
20	Centering and shuttering including strutting, propping etc. anc removal of form work for:
21	Foundations, footings, bases of Columns
22	Centering and shuttering including strutting, propping etc. and removal of form for
23	Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers
24	Centering and shuttering including strutting, propping etc. and removal of form for
25	Columns, Pillars, Piers, Abutments, Posts & Struts
26	Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level
27	Hot Rolled deformed bars
28	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
29	With F.P.S (Non Modular) bricks
30	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
31	Cement mortar 1:4 (1 cement : 4 coarse sand)
32	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
33	Second class teak wood
34	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in charge and panelling with panels of: (Note: screws shall be paid separately) Butt hinges and necessary
35	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
36	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid separately)
37	Second class Teak wood
38	35mm thick shutters
39	Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer\"s specification and direction of Engineer-in-Charge.
40	Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
41	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
42	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
43	100x75x4 mm
44	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
45	250x16 mm
46	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
47	200 * 10mm
48	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
49	125 mm
50	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
51	Twin rubber stopper
52	Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
53	Fixed to Opening / wooden frames with rawl plugs screws etc
54	Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)
55	25 mm thick
56	Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.
57	8mm thick (mirror polished and machine cut edge)
58	Granite stone of any colour and shade
59	Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
60	Udaipur green marble
61	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).
62	Dark shade pigment using ordinary cement
63	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
64	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete
65	Size of Tile 600x600 mm
66	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)
67	Size of Tile 600x600 mm
68	Providing Zinc Aluminium Alloy Galavanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.
69	0.50 mm thick
70	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
71	Hot finished welded type tubes
72	12 mm cement plaster of mix:
73	1:6 (1 cement :6 Coarse sand)
74	20 mm cement plaster of mix:
75	1:6 (1 cement :6 Coarse sand)
76	6 mm cement plaster of mix:
77	(1 cement: 3 fine sand)
78	Applying priming coat
79	With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)
80	Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.
81	Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
82	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
83	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
84	Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es
85	Two or more coats on new work
86	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:
87	New work ( Two or more coats) over and including priming coat with water thinnable cement primer
88	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.
89	Two Coats
90	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
91	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately)
92	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for separately)
93	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
94	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)
95	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
96	Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be pald separately):
97	Flat surfaces
98	Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete
99	ACADEMIC FIRST FLOOR CIVIL
100	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)
101	All works above Plinth level upto floor V level
102	Centering and shuttering including strutting, propping etc. and removal of form for
103	Lintles, Beams, Plinth beams, Girders, Bressumers & Cantilevers
104	Centering and shuttering including strutting, propping etc. and removal of form for
105	Columns, Pillars, Piers, Abutments, Posts & Struts
106	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
107	Hot Rolled deformed bars
108	Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
109	With F.P.S (Non Modular) bricks
110	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
111	Cement mortar 1:4 (1 cement : 4 coarse sand)
112	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
113	Second class teak wood
114	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary
115	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthtic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
116	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)
117	Second class Teak wood
118	35mm thick shutters
119	Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer\"s specification and direction of Engineer-in-
120	Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
121	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
122	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
123	100x75x4 mm
124	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
125	250x16 mm
126	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
127	200 * 10mm
128	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
129	125 mm
130	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
131	Twin rubber stopper
132	Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
133	Fixed to Opening / wooden frames with rawl plugs screws etc
134	Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)
135	25 mm thick
136	Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.
137	8mm thick (mirror polished and machine cut edge)
138	Granite stone of any colour and shade
139	Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
140	Udaipur green marble
141	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
142	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorbtion less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete
143	Size of Tile 600x600 mm
144	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)
145	Size of Tile 600x600 mm
146	Providing Zinc Aluminium Alloy Galavanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.
147	0.50 mm thick
148	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
149	Hot finished welded type tubes
150	12 mm cement plaster of mix:
151	1:6 (1 cement :6 Coarse sand)
152	20 mm cement plaster of mix:
153	1:6 (1 cement :6 Coarse sand)
154	6 mm cement plaster of mix:
155	(1 cement: 3 fine sand)
156	Applying priming coat
157	With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)
158	Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.
159	Applying priming coatwith primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
160	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
161	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
162	Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es
163	Two or more coats on new work
164	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:
165	New work ( Two or more coats) over and including priming coat with water thinnable cement primer
166	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.
167	Two Coats
168	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
169	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrudued built up standard tubular sections/ appropiate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately)For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
170	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
171	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
172	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)
173	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
174	Providing 10mm thick plaster of paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be pald separately):
175	Flat surfaces
176	Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete
177	ACADEMIC SECOND FLOOR CIVIL
178	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)
179	All works above Plinth level upto floor V level
180	Centering and shuttering including strutting, propping etc. and removal of form for
181	Lintles, Beams, Plinth beams, Girders, Bressumers & Cantilevers
182	Centering and shuttering including strutting, propping etc. and removal of form for
183	Columns, Pillars, Piers, Abutments, Posts & Struts
184	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
185	Hot Rolled deformed bars
186	Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
187	With F.P.S (Non Modular) bricks
188	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
189	Cement mortar 1:4 (1 cement : 4 coarse sand)
190	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
191	Second class teak wood
192	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary
193	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthtic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
194	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)
195	Second class Teak wood
196	35mm thick shutters
197	Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer\"s specification and direction of Engineer-in-
198	Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
199	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
200	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
201	100x75x4 mm
202	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
203	250x16 mm
204	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
205	200 * 10mm
206	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
207	125 mm
208	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
209	Twin rubber stopper
210	Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
211	Fixed to Opening / wooden frames with rawl plugs screws etc
212	Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)
213	25 mm thick
214	Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.
215	8mm thick (mirror polished and machine cut edge)
216	Granite stone of any colour and shade
217	Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
218	Udaipur green marble
219	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
220	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorbtion less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete
221	Size of Tile 600x600 mm
222	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)
223	Size of Tile 600x600 mm
224	Providing Zinc Aluminium Alloy Galavanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.
225	0.50 mm thick
226	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
227	Hot finished welded type tubes
228	12 mm cement plaster of mix:
229	1:6 (1 cement :6 Coarse sand)
230	20 mm cement plaster of mix:
231	1:6 (1 cement :6 Coarse sand)
232	6 mm cement plaster of mix:
233	(1 cement: 3 fine sand)
234	Applying priming coat
235	With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)
236	Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.
237	Applying priming coatwith primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
238	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
239	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
240	Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es
241	Two or more coats on new work
242	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:
243	New work ( Two or more coats) over and including priming coat with water thinnable cement primer
244	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.
245	Two Coats
246	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrudued built up standard tubular sections/ appropiate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately)For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
247	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
248	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
249	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)
250	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
251	Providing 10mm thick plaster of paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be pald separately):
252	Flat surfaces
253	Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete
254	COMPOUND WALL PART A
255	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All Kinds of soil
256	All kind of Soil
257	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
258	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
259	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
260	All works upto Plinth level
261	All works above Plinth level upto floor V level
262	Centering and shuttering including strutting, propping etc. an removal of form work for:
263	Foundations, footings, bases of Columns
264	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
265	Hot Rolled deformed bars
266	Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
267	With FPS( Non Modular) bricks
268	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
269	Second class teak wood
270	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary
271	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthtic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
272	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrudued built up standard tubular sections/ appropiate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ satinless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)
273	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
274	Anodised aliminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
275	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of alimunium snap beading shall be paid in basic item)
276	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
277	15 mm cement plaster on the rough side of single or half brick wall of mix:
278	1:4 (1 cement :4 fine sand)
279	Applying priming coatwith primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
280	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
281	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.Two Coats
282	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
283	Hot finished welded type tubes
284	COMPOUND WALL PART B
285	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.
286	All Kinds of soil
287	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)
288	All works upto Plinth level
289	Providing and fixing G.I Chain Link Fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-Charge
290	Made of G.I wire of dia 4mm
291	Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
292	Providing and Fixing Barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.
293	WATER BOUND MACADAM (W.B.M) ROAD
294	Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Unit Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and across sections, and transporting to the embankment location within all lifts and lead upto 1000m
295	Compacting Original Ground Arounds Loosening of the ground upto a level of 500 mm below the sub grade level, watered, graded and compacted in layers to meet the requirement of table 300-2 for sub-grade construction
296	Compacting Original Ground supporting sub-grade
297	Compacting Original Ground supporting Embankment
298	Construction of granular sub-base by providing granular material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
299	By Mix in Place Method
300	Granular Sub-Base Grading-I Material
301	Granular Sub-Base Grading-II Material
302	Granular Sub-Base Grading-III Material
303	Water Bound Macadam
304	Providing, laying, spreding and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density
305	By Manual Means
306	Grading II
307	Using Screening Crushable type such as Moorum or Gravel
308	Grading III
309	Using Screening Crushable type such as Moorum or Gravel
310	Prime Coat
311	Prime Coat over WMM / WBM
312	Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sum using mechanical means.
313	Tack Coat
314	Tack Coat on Bituminous surfaces
315	Providing and applying tack coat with bitumen ernulsion using emulsion pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom.
316	Bituminous Macadam Grading -I
317	Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction
318	Bituminous Macadam Grading -II
319	Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading ipremixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the reguired grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction
320	Surface Dressing
321	Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8- 10 tonne smooth wheeled steel roller
322	13 mm nominal chipping size
323	Seal Coat Description Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats
324	Type A
325	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:
326	600mm dia R.C.C. Pipe
327	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
328	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
329	Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
330	With FPS( Non Modular) bricks
331	12 mm cement plaster finished with floating coat of neat cement of mix
332	1:4 (1 cement :4 Fine sand)
333	UNDER GROUND TANK 1
334	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
335	All kind of Soil
336	Extra for every additonal lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.
337	All Kinds of soil
338	Extra for every additonal lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.
339	Ordinary or Hard Rock
340	Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:
341	1:4 (1 cement: 4 coarse sand)
342	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
343	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
344	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
345	All works upto Plinth level
346	Centering and shuttering including strutting, propping etc. anc removal of form work for:
347	Foundations, footings, bases of Columns
348	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
349	Hot Rolled deformed bars
350	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
351	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.
352	With 20 mm diameter round bar
353	Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.
354	LD-2.5
355	Rectangular shape 600x450mm internal dimensions
356	UNDER GROUND TANK 2
357	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
358	All kind of Soil
359	Extra for every additonal lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.
360	All Kinds of soil
361	Extra for every additonal lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.
362	Ordinary or Hard Rock
363	Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:
364	1:4 (1 cement: 4 coarse sand)
365	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
366	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
367	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous aggitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
368	All works upto Plinth level
369	Centering and shuttering including strutting, propping etc. anc removal of form work for:
370	Foundations, footings, bases of Columns
371	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
372	Hot Rolled deformed bars
373	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
374	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.
375	With 20 mm diameter round bar
376	Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.
377	LD-2.5
378	Rectangular shape 600x450mm internal dimensions
379	LANDSCAPING WORK
380	Planting of Trees and their Maintenance for one Year
381	Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year
382	Tree Guard with MS Angle Iron and Steel Wire
383	Providing and fixing tree guard 0.60 metre square, 2.00 metre high fabricated with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3; mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together
384	SEPTIC TANK 1
385	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
386	All kind of Soil
387	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
388	Ordinary Rock
389	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
390	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
391	Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.
392	1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)
393	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
394	Hot Rolled deformed bars
395	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
396	With F. P. S. (non modular) bricks
397	12 mm cement plaster finished with floating coat of neat cement of mix
398	1:4 (1 cement :4 Fine sand)
399	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
400	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
401	Inside dimensions 600x850 mm and 45 cm deep for single pipe tine.
402	With commom burnt clay F.P.S. (non modular) bricks of class designation 7.5
403	SEPTIC TANK 2
404	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
405	All kind of Soil
406	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
407	Ordinary Rock
408	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
409	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
410	Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.
411	1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)
412	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
413	Hot Rolled deformed bars
414	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
415	With F. P. S. (non modular) bricks
416	12 mm cement plaster finished with floating coat of neat cement of mix
417	1:4 (1 cement :4 Fine sand)
418	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
419	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
420	Inside dimensions 600x850 mm and 45 cm deep for single pipe tine.
421	With commom burnt clay F.P.S. (non modular) bricks of class designation 7.5
422	SEPTIC TANK 3
423	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
424	All kind of Soil
425	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
426	Ordinary Rock
427	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
428	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
429	Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.
430	1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)
431	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
432	Hot Rolled deformed bars
433	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
434	With F. P. S. (non modular) bricks
435	12 mm cement plaster finished with floating coat of neat cement of mix
436	1:4 (1 cement :4 Fine sand)
437	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
438	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
439	Inside dimensions 600x850 mm and 45 cm deep for single pipe tine.
440	With commom burnt clay F.P.S. (non modular) bricks of class designation 7.5
441	RAINWATER HARVESTING
442	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
443	All kind of Soil
444	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
445	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
446	12 mm cement plaster finished with a floating coat of neat cement of mix:
447	1:3 (1 cement :3 fine sand)
448	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
449	With FPS( Non Modular) bricks
450	Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7mmconfirming to I.S. 13592-1992 including proper rainwater receiving recesswithP.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inludingfixingthepipeonwallusingapprovedwoodencleatsprojecting 25mmto40mmfromfaceofwallafixingwithclipsofapprovedqualityandOneNumber ,filingthejointusingrubbergasketwith solvent cement and properly resting the shoe of pipes onC.C. ormasonryblocks, includingnecessaryscaffoldingandmaintenance for3yrsforanyleakagesordislocationsofpipes.AlltheP.V.C.fittingsandadditional2 piece socket clips shall be got approved from engineer in charge etc. complete.
451	Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and havingwall thickness of 2.2 to 2.7mmconfirming to I.S. 13592-1992 including proper rainwater receiving recesswithP.V.C. plug, bend, necessaryfittings, suchas, offsets, shoes, inludingfixingthepipeonwallusingapprovedwoodencleatsprojecting 25mmto40mmfromfaceofwallafixingwithclipsofapprovedqualityandOneNumber ,filingthejointusingrubbergasketwith solventcement and properly resting the shoe of pipes onC.C. ormasonryblocks, includingnecessaryscaffoldingandmaintenance for3yrsforanyleakagesordislocationsofpipes.AlltheP.V.C.fittingsandadditional2 piece socket clips shall be got approved from engineer in charge etc. complete.
452	DEMOLITION AND RETROFITTING WORK OF EXISTING BLOCK
453	Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
454	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.
455	In cement mortar
456	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:
457	Of area 3 sq. metres and below
458	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
459	For thickness of tiles 10 mm to 25 mm
460	PLUMBING GROUND FLOOR
461	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
462	15 mm nominal bore
463	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
464	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
465	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
466	W.C. pan with ISI marked black solid plastic seat and lid
467	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:
468	Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
469	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
470	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
471	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
472	Rectangular shape 453x357mm dia.
473	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge
474	Concealed work, including cutting chases and making good the walls etc.
475	20 mm nominal outer dia Pipes
476	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge
477	External work
478	40 mm nominal outer dia Pipes
479	50 mm nominal outer dia Pipes
480	Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete
481	Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete.
482	Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
483	With commonburnt clay F.P.S( non modular )bricks of class designation 7.5
484	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
485	Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
486	100x100 mm size P type
487	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
488	PLUMBING FIRST FLOOR
489	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
490	15 mm nominal bore
491	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
492	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
493	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
494	W.C. pan with ISI marked black solid plastic seat and lid
495	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:
496	Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
497	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
498	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
499	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
500	Rectangular shape 453x357mm dia.
501	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge
502	Concealed work, including cutting chases and making good the walls etc.
503	20 mm nominal outer dia Pipes
504	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge
505	External work
506	40 mm nominal outer dia Pipes
507	50 mm nominal outer dia Pipes
508	Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete
509	Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete.
510	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
511	15 mm nominal bore
512	PLUMBING SECOND FLOOR
513	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
514	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
515	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
516	W.C. pan with ISI marked black solid plastic seat and lid
517	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
518	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
519	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
520	Rectangular shape 453x357mm dia.
521	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge
522	Concealed work, including cutting chases and making good the walls etc.
523	20 mm nominal outer dia Pipes
524	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge
525	External work
526	40 mm nominal outer dia Pipes
527	50 mm nominal outer dia Pipes
528	Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete
529	Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete.
530	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
531	15 mm nominal bore
532	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
533	FIREFIGHTING GROUND FLOOR
534	Supplying,installing,testingandcommissioningopticaltype smoke detector complete on box as per specification no.FFFAS/ SD
535	Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
536	ground floor to first
537	SupplyingandinstallingwallmountingswingingHosereel drumfittedwith19mmdia.30meterhighpressure polypropylene(Polyhouse)longfittedwithnecessaryaccessoriescomplete as per specification no. FF-FFA/HV
538	CO2 EXTINGUISHER
539	ABC EXTINGUISHER
540	Hooter
541	Manual Call Point
542	Fire Alarm Control Panel
543	Fire Pump
544	Butter fly valve
545	FIRE FIGHTING FIRST FLOOR
546	Supplying,installing,testingandcommissioningopticaltype smoke detector complete on box as per specification no.FFFAS/ SD
547	Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
548	SupplyingandinstallingwallmountingswingingHosereel drumfittedwith19mmdia.30meterhighpressure polypropylene(Polyhouse)longfittedwithnecessaryaccessoriescomplete as per specification no. FF-FFA/HV
549	CO2 EXTINGUISHER
550	ABC EXTINGUISHER
551	Hooter
552	Manual Call Point
553	Fire Alarm Control Panel
554	Butter fly valve
555	FIREFIGHTING SECOND FLOOR
556	Supplying,installing,testingandcommissioningopticaltype smoke detector complete on box as per specification no.FFFAS/ SD
557	Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
558	SupplyingandinstallingwallmountingswingingHosereel drumfittedwith19mmdia.30meterhighpressure polypropylene(Polyhose)longfittedwithnecessaryaccessoriescomplete as per specification no. FF-FFA/HV
559	CO2 EXTINGUISHER
560	ABC EXTINGUISHER
561	Hooter
562	Manual Call Point
563	Fire Alarm Control Panel
564	Butter fly valve
565	GROUND FLOOR- INTERNAL ELECTRIFICATION
566	Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e providing and fixing anchor made 5A flush type switches and all other accessories
567	a. Light point Short
568	b. Light point Medium
569	c. Light point Long
570	d. Call bell Point Long
571	e. Fan point medium
572	f. Exhaust fan point medium
573	Wiring with 3 pin5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.
574	a. Medium point
575	b. Long point
576	Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.
577	a. Medium point
578	b. Long point
579	Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.
580	a. With 1.5 mm2 copper cable s/core
581	b. With 2.5 mm2 copper cable s/core
582	c. with 4 mm2 copper cable s/core
583	d. With 6mm2 copper cable s/core
584	e. With 10mm2 copper cable s/core
585	f. With 1mm copper cable s/core for earth continuity
586	Fixing & Providing, Drilling holes and connection etc
587	a. MCB 10A
588	b. MCB 16A
589	c. MCB 20A
590	d. Isolator 40 Amp 2 pole
591	e. Isolator 63 Amp 2 pole
592	f. MCB Box 10 ways
593	g. MCB Box 12 ways
594	i. Main Switch 100A
595	j. Bus-Bar 100A 4 strips
596	k. TPN 100A
597	l. Change over Switch 100A
598	m. Angle holder
599	n. Bracket holder
600	o. LED Double tube light fitting 2x40wx4 with all accessories
601	q. Exhaust fan with all accessories
602	s. LED bulb 9w
603	t. Call Bell Ding Dong
604	u. Bulk head fitting with all accessories
605	Providing & fixing, drilling holes and connection etc.
606	a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal,salt etc.as requiresd. The depth of the pit shall be atleast 3m or as per moisture availability.
607	b. Copper wire 4sq.mm
608	c. Lightning arrester
609	d. Panel Board
610	e.100 Sq.mm Al. LT. Power Cable
611	Energy Meter
612	Armed cablefor Main 4 core X 10 Sqmm for Building
613	Armed cablefor Main 4 core X 4 Sqmm for Building
614	Armed cablefor Main 4 core X 35 Sqmm for Building
615	Water Purify
616	5 KVA UPS
617	FIRST FLOOR- INTERNAL ELECTRIFICATION
618	Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e providing and fixing anchor made 5A flush type switches and all other accessories
619	a. Light point Short
620	b. Light point Medium
621	c. Light point Long
622	d. Call bell Point Long
623	e. Fan point medium
624	f. Exhaust fan point medium
625	Wiring with 3 pin5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.
626	a. Medium point
627	b. Long point
628	Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.
629	a. Medium point
630	b. Long point
631	Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.
632	a. With 1.5 mm2 copper cable s/core
633	b. With 2.5 mm2 copper cable s/core
634	c. with 4 mm2 copper cable s/core
635	d. With 6mm2 copper cable s/core
636	e. With 10mm2 copper cable s/core
637	f. With 1mm copper cable s/core for earth continuity
638	Fixing & Providing, Drlling holes and connection etc
639	a. MCB 10A
640	b. MCB 16A
641	c. MCB 20A
642	d. Isolator 40 Amp 2 pole
643	e. Isolator 63 Amp 2 pole
644	f. MCB Box 10 ways
645	g. MCB Box 12 ways
646	i. Main Switch 100A
647	m. Angle holder
648	n. Bracket holder
649	o. LED Double tube light fitting 2x40wx4 with all accessories
650	q. Exhaust fan with all accessories
651	s. LED bulb 9w
652	t. Call Bell Ding Dong
653	u. Bulk head fitting with all accessories
654	Providing & fixing, drilling holes and connection etc.
655	a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal,salt etc.as requiresd. The depth of the pit shall be atleast 3m or as per moisture availability.
656	b. Copper wire 4sq.mm
657	c. Lightning arrester
658	d. Panel Board
659	e.100 Sq.mm Al. LT. Power Cable
660	Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)
661	Supplying, erecting, testing & commissioning of 5 kVA capacity on line pure sine wave, PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification. (With batteries)
662	SECOND FLOOR INTERNAL ELECTRIFICATION
663	Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e providing and fixing anchor made 5A flush type switches and all other accessories
664	c. Light point Long
665	d. Call bell Point Long
666	e. Fan point medium
667	Wiring with 3 pin5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.
668	a. Medium point
669	b. Long point
670	Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.
671	a. Medium point
672	b. Long point
673	Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.
674	a. With 1.5 mm2 copper cable s/core
675	b. With 2.5 mm2 copper cable s/core
676	c. with 4 mm2 copper cable s/core
677	d. With 6mm2 copper cable s/core
678	e. With 10mm2 copper cable s/core
679	f. With 1mm copper cable s/core for earth continuity
680	Fixing & Providing, Drilling holes and connection etc
681	a. MCB 10A
682	b. MCB 16A
683	c. MCB 20A
684	d. Isolator 40 Amp 2 pole
685	e. Isolator 63 Amp 2 pole
686	f. MCB Box 10 ways
687	g. MCB Box 12 ways
688	m. Angle holder
689	n. Bracket holder
690	o. LED Double tube light fitting 2x40wx4 with all accessories
691	s. LED bulb 9w
692	t. Call Bell Ding Dong
693	u. Bulk head fitting with all accessories
694	Providing & fixing, drilling holes and connection etc.
695	a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal,salt etc.as requiresd. The depth of the pit shall be atleast 3m or as per moisture availability.
696	b. Copper wire 4sq.mm
697	c. Lightning arrester
698	d. Panel Board
699	e.100 Sq.mm Al. LT. Power Cable
700	Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)
701	EXTERNAL ELECTRIFICATION
702	Fixing & Providing, Drilling holes and connection etc
703	a. MCB 20A
704	b. Isolator 63 Amp 2 pole
705	c. Main Switch 100A
706	d. Bus-Bar 100A 4 strips
707	e. TPN 100A
708	f. Change over Switch 100A
709	g. 60 watt LED for street Light
710	h.Pole
711	i.Pole Arm
712	a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal,salt etc.as requiresd. The depth of the pit shall be atleast 3m or as per moisture availability.
713	b. Copper wire 4sq.mm
714	c. Lightning arrester
715	d. Panel Board
716	e.100 Sq.mm Al. LT. Power Cable
717	Energy Meter
718	Armed cablefor Main 4 core X 10 Sqmm for Street light
719	Supplying, erecting, testing and commissioning of diesel generating set with alternator of 30 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 5.9 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 65 ltr etc., as per specification
720	BOYS HOSTEL GROUND FLOOR CIVIL
721	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
722	All kind of Soil
723	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
724	Ordinary Rock
725	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)
726	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
727	With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
728	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
729	Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:
730	1:4 (1 cement: 4 coarse sand)
731	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
732	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
733	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
734	All works upto Plinth level
735	All works above Plinth level upto floor V level
736	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).
737	Centering and shuttering including strutting, propping etc. and removal of form work for:
738	Foundations, footings, bases of Columns
739	Centering and shuttering including strutting, propping etc. and removal of form for
740	Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers
741	Centering and shuttering including strutting, propping etc. and removal of form for
742	Columns, Pillars, Piers, Abutments, Posts & Struts
743	Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.
744	0.50 mm thick
745	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
746	Hot finished welded type tubes
747	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
748	Hot Rolled deformed bars
749	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
750	With F. P. S. (non-modular) bricks
751	Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
752	Cement mortar 1:4 (1 cement : 4 coarse sand)
753	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
754	Second class teak wood
755	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
756	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
757	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)
758	Second class Teak wood
759	30mm thick shutters
760	Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer\"s specification and direction of Engineer-in-Charge.
761	Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
762	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
763	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
764	100x75x4 mm
765	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
766	250x16 mm
767	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
768	200 * 10mm
769	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
770	125 mm
771	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
772	Twin rubber stopper
773	Fixed to opening/ wooden frames with rawl plugs screws etc.
774	Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse 25 mm thick
775	25 mm thick
776	Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.
777	8mm thick (mirror polished and machine cut edge)
778	Granite stone of any colour and shade
779	Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
780	Udaipur green marble
781	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
782	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete
783	Size of Tile 600x600 mm
784	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)
785	Size of Tile 600x600 mm
786	12 mm cement plaster of mix:
787	1:6 (1 cement :6 Coarse sand)
788	20 mm cement plaster of mix:
789	1:6 (1 cement :6 Coarse sand)
790	6 mm cement plaster of mix:
791	(1 cement: 3 fine sand)
792	Applying priming coat
793	With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)
794	Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.
795	Painting with synthetic enamel paint of approval brand and manufacture to give an even shade
796	Two or more coats on new work
797	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
798	Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
799	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
800	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.
801	Two Coats
802	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
803	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)
804	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
805	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
806	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)
807	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
808	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
809	BOYS HOSTEL FIRST FLOOR CIVIL
810	Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)
811	All works above Plinth level upto floor V level
812	Centering and shuttering including strutting, propping etc. and removal of form for
813	Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers
814	Centering and shuttering including strutting, propping etc. and removal of form for
815	Columns, Pillars, Piers, Abutments, Posts & Struts
816	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
817	Hot Rolled deformed bars
818	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
819	With F. P. S. (non-modular) bricks
820	Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
821	Cement mortar 1:4 (1 cement : 4 coarse sand)
822	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
823	Second class teak wood
824	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
825	12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked
826	Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer\"s specification and direction of Engineer-in-Charge.
827	Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
828	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
829	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
830	100x75x4 mm
831	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
832	250x16 mm
833	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
834	200 * 10mm
835	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
836	125 mm
837	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
838	Twin rubber stopper
839	Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
840	Fixed to opening/ wooden frames with rawl plugs screws etc.
841	Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.
842	8mm thick (mirror polished and machine cut edge)
843	Granite stone of any colour and shade
844	Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
845	Udaipur green marble
846	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
847	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete
848	Size of Tile 600x600 mm
849	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)
850	Size of Tile 600x600 mm
851	Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.
852	0.50 mm thick
853	Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
854	Hot finished welded type tubes
855	12 mm cement plaster of mix:
856	1:6 (1 cement :6 Coarse sand)
857	20 mm cement plaster of mix:
858	1:6 (1 cement :6 Coarse sand)
859	Applying priming coat
860	With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)
861	Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.
862	Painting with synthetic enamel paint of approval brand and manufacture to give an even shade
863	Two or more coats on new work
864	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
865	Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.
866	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
867	Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.
868	Two Coats
869	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)
870	For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)
871	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):
872	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)
873	With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
874	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
875	BOYS HOSTEL SEPTIC TANK
876	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
877	All kind of Soil
878	Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
879	Ordinary Rock
880	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level
881	1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)
882	Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.
883	1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)
884	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
885	Hot Rolled deformed bars
886	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):
887	With F. P. S. (non-modular) bricks
888	12 mm cement plaster finished with floting coat cement of mix
889	1:4 (1 cement :4 Fine sand)
890	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
891	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
892	Inside dimensions 600x850 mm and 45 cm deep for single pipe line.
893	With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
894	GROUND FLOOR PLUMBING
895	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
896	15 mm nominal bore
897	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
898	White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
899	Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid
900	W.C. pan with ISI marked black solid plastic seat and lid
901	Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:
902	Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
903	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
904	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
905	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
906	Rectangular shape 453x357mm dia.
907	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge
908	Concealed work, including cutting chases and making good the walls etc.
909	20 mm nominal outer dia Pipes
910	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge
911	External work
912	40 mm nominal outer dia Pipes
913	50 mm nominal outer dia Pipes
914	Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
915	Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
916	Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
917	With common burnt clay F.P.S( non-modular ) bricks of class designation 7.5
918	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
919	Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
920	100x100 mm size P type
921	With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
922	FIRST FLOOR PLUMBING
923	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
924	15 mm nominal bore
925	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
926	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
927	Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid
928	W.C. pan with ISI marked black solid plastic seat and lid
929	Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:
930	Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
931	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
932	Rectangular shape 453x357mm dia.
933	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge
934	Concealed work, including cutting chases and making good the walls etc.
935	20 mm nominal outer dia Pipes
936	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge
937	External work
938	40 mm nominal outer dia Pipes
939	50 mm nominal outer dia Pipes
940	Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
941	Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
942	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
943	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
944	GROUND FLOOR- INTERNAL ELECTRIFICATION
945	Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories
946	a. Light point Short
947	b. Light point Medium
948	c. Light point Long
949	d. Call bell Point Long
950	e. Fan point medium
951	f. Exhaust fan point medium
952	Wiring with 3 pin5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.
953	a. Medium point
954	b. Long point
955	Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.
956	a. Medium point
957	b. Long point
958	Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.
959	a. With 1.5 mm2 copper cable s/core
960	b. With 2.5 mm2 copper cable s/core
961	c. with 4 mm2 copper cable s/core
962	d. With 6mm2 copper cable s/core
963	e. With 10mm2 copper cable s/core
964	f. With 1mm copper cable s/core for earth continuity
965	Fixing & Providing, Drilling holes and connection etc
966	a. MCB 10A
967	b. MCB 16A
968	c. MCB 20A
969	d. Isolator 40 Amp 2 pole
970	e. Isolator 63 Amp 2 pole
971	f. MCB Box 10 ways
972	g. MCB Box 12 ways
973	h. Main Switch 100A
974	i. Bus-Bar 100A 4 strips
975	j. TPN 100A
976	k. Change over Switch 100A
977	l. Angle holder
978	m. Bracket holder
979	n. LED Double tube light fitting 2x40wx4 with all accessories
980	o. Exhaust fan with all accessories
981	p. LED bulb 9w
982	q. Call Bell Ding Dong
983	r. Bulk head fitting with all accessories
984	Providing & fixing, drilling holes and connection etc.
985	a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.
986	b. Copper wire 4sq.mm
987	c. Lightning arrester
988	d. Panel Board
989	e.100 Sq.mm Al. LT. Power Cable
990	Supplying and installing Energy Meter
991	Armed cablefor Main 4 core X 10 Sqmm for Building
992	Armed cablefor Main 4 core X 4 Sqmm for Building
993	Armed cablefor Main 4 core X 35 Sqmm for Building
994	Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)
995	FIRST FLOOR- INTERNAL ELECTRIFICATION
996	Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories
997	a. Light point Short
998	b. Light point Medium
999	c. Light point Long
1000	d. Call bell Point Long
1001	e. Fan point medium
1002	f. Exhaust fan point medium
1003	Wiring with 3 pin5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.
1004	a. Medium point
1005	b. Long point
1006	Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.
1007	a. Medium point
1008	b. Long point
1009	Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.
1010	a. With 1.5 mm2 copper cable s/core
1011	b. With 2.5 mm2 copper cable s/core
1012	c. with 4 mm2 copper cable s/core
1013	d. With 6mm2 copper cable s/core
1014	e. With 10mm2 copper cable s/core
1015	f. With 1mm copper cable s/core for earth continuity
1016	Fixing & Providing, Drilling holes and connection etc
1017	a. MCB 10A
1018	b. MCB 16A
1019	c. MCB 20A
1020	d. Isolator 40 Amp 2 pole
1021	e. Isolator 63 Amp 2 pole
1022	f. MCB Box 10 ways
1023	g. MCB Box 12 ways
1024	h. Main Switch 100A
1025	i. Angle holder
1026	j. Bracket holder
1027	k. LED Double tube light fitting 2x40wx4 with all accessories
1028	l. Exhaust fan with all accessories
1029	m. LED bulb 9w
1030	n. Call Bell Ding Dong
1031	o. Bulk head fitting with all accessories
1032	Providing & fixing, drilling holes and connection etc.

Also Visit

Tenders

Nagaland Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Selection Of Agency For Execution Of Infrastructural Development Of Lighthouse School Complex (Lsc)-Government High School (Ghs) Noklak Under Noklak District., Noklak-Nagaland

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Selection Of Agency For Execution Of Infrastructural Development Of Lighthouse School Complex (Lsc)-Government High School (Ghs) Noklak Under Noklak District., Noklak-Nagaland

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us