Tender For Supply Of Strainers For Ug And Ag Piping For Nrep, numaligarh-Assam

Supply Of Strainers For Ug And Ag Piping For Nrep Supply Of Strainers For Ug And Ag Piping For Msb,Pfcc,Gds Unit For Nrep , Group -1 Supply Of Strainer (Basket Type)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition.(Qty =4 Nos ) , Strainer Basket Type As, 300,0, Mfr. Std., Flgd,B16.5, Rf, Designbasket Type, Drain Conn.2,Flgd,Rf, Vent Conn.2,Flgd,Rf, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Normal Operationmesh 80, Weld Factor E = 1.0, A217 Gr.C12, Wn Flg A182 Gr.F9, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Supp. Requirements, Inlet And Outlet Nozzle Shall Be Opposite, To Each Other And On Same Plane., Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Design Pressure 17.5 KgCm2g, Design Temperature 430 Deg C, Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, Supporting Legs (3Nos) To Be Provided., 100% Radiography For Casting And Dp/Mp, Testing For Weld Joints., Alternative Fabricated Basket Type, Stariner Is Also Acceptable And, Shall Be As Follows, A335 Gr.P9/A691 Gr.9Cr Cl42/, A387gr9cl.1, Flangea182 Gr.F9, All Butt Weld Joints Shall Be 100%, Radiographed And Others Dp/Mp Tested. , Strainer Basket Type As, 300,0, Mfr. Std., Flgd,B16.5, Rf, Designbasket Type, Drain Conn.2,Flgd,Rf, Vent Conn.2,Flgd,Rf, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Normal Operationmesh 80, Weld Factor E = 1.0, A217 Gr.C12, Wn Flg A182 Gr.F9, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Supp. Requirements, Inlet And Outlet Nozzle Shall Be Opposite, To Each Other And On Same Plane., Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Design Pressure 17.5 KgCm2g, Design Temperature 430 Deg C, Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, Supporting Legs (3Nos) To Be Provided., 100% Radiography For Casting And Dp/Mp, Testing For Weld Joints., Alternative Fabricated Basket Type, Stariner Is Also Acceptable And, Shall Be As Follows, A335 Gr.P9/A691 Gr.9Cr Cl42/, A387gr9cl.1, Flangea182 Gr.F9, All Butt Weld Joints Shall Be 100%, Radiographed And Others Dp/Mp Tested. , Group -2 Supply Of Strainers (Int Coated / Galvanised)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =152 Nos ) , Strainer T-Type Cs (Galv.), 150,0, Mfr. Std., Flgd,B16.5, Ff, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, A234 Gr.Wpb-S(Galv.), Wn Flg A105n (Galv.), Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Cloth Fitted. Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E.One For Primary, Other For Secondary., Cast Strainerof Moc, A216 Gr.Wcb(Galv.)As A Alternative Is, Also Acceptable. , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch 20, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 40, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 20, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs (Galv.), 150,0, Mfr. Std., Flgd,B16.5, Ff, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, A234 Gr.Wpb-S(Galv.), Wn Flg A105n (Galv.), Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Cloth Fitted. Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E.One For Primary, Other For Secondary., Cast Strainerof Moc, A216 Gr.Wcb(Galv.)As A Alternative Is, Also Acceptable. , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch 20, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 40, Start-Up Overlay-, Internally Liquid Epoxy Coated, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 20, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., (I.E. As Per Nrl Drg.), Strainer Shall Be Supplied With Start-Up, Overaly Cloth Fitted. Removal Of It Before, Normal Operation Shall By Easy Means With, Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E.(One For Primary, Other For Secondary). , Strainer T-Type Cs (Galv.), 150,0, Mfr. Std., Flgd,B16.5, Ff, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, A234 Gr.Wpb-S(Galv.), Wn Flg A105n (Galv.), Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Cloth Fitted. Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E.One For Primary, Other For Secondary., Cast Strainerof Moc, A216 Gr.Wcb(Galv.)As A Alternative Is, Also Acceptable. , Strainer T-Type Cs (Galv.), 150,0, Mfr. Std., Flgd,B16.5, Ff, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, A234 Gr.Wpb-S(Galv.), Wn Flg A105n (Galv.), Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Cloth Fitted. Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E.One For Primary, Other For Secondary., Cast Strainerof Moc, A216 Gr.Wcb(Galv.)As A Alternative Is, Also Acceptable. , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, Internally Liquid Epoxy Coated, Doc. Nr-0Zzzz-Cv-Spe-0019, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs Int.Coated, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay- , Group -3 Supply Of Strainers (Nace / Caustic / Nace+Caustic)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =66 Nos ) , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch 160, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 160, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Caustic), 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Monel, Other Inter.Monel, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs (Caustic), 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Monel, Other Inter.Monel, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Typ Cs(Nace+Caustic, 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Caustic), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Monel, Other Inter.Monel, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs (Caustic), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Monel, Other Inter.Monel, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs (Caustic), 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Monel, Other Inter.Monel, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch 20, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 20, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch 20, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 20, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch 40, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 40, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Typ Cs(Nace+Caustic, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Typ Cs(Nace+Caustic, 150,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Typ Cs(Nace+Caustic, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Typ Cs(Nace+Caustic, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Typ Cs(Nace+Caustic, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch 160, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 160, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Cs (Nace), 150,0, Mfr. Std., Bw Ends,Sch 160, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Grb7m/A194gr2hm, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 160, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Group -4 Supply Of Strainers ( Y Type - Cast/Fab.)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =27 Nos ) , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type Cs, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As (H2 Ser.), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A217 Gr.Wc6, Internals Ss 304, Blind Flga182 Gr.F11 Cl.2, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A217 Gr.C12, Internals Ss 304, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type Cs (Ibr), 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Ibr Certificate In Form Iiic Required. , Strainer Y-Type Cs, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A216 Gr.Wcb, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Ss, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A351 Gr.Cf8c, Internals Ss 321, Blind Flga182 Gr.F321, Sp Wd Ss 321 + Grph, A453 Gr.660,Cl.A, Screen Ss 321, Other Inter.Ss 321, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer Y-Type Ss, 300,0, Mfr. Std., Flgd,B16.5, Rf, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A351 Gr.Cf8c, Internals Ss 321, Blind Flga182 Gr.F321, Sp Wd Ss 321 + Grph, A453 Gr.660,Cl.A, Screen Ss 321, Other Inter.Ss 321, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Group -5 Supply Of Strainers ( Y Type - Forged)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =111 Nos ) , Strainer Y-Type Cs (Galv.), 800,0, Mfr. Std., Threaded Ends,Fnpt, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 10, Start-Up Overlay-, A105n (Galv.), Internals Ss 304, Blind Flga105n, Epdm Nsf61/Ansi 61-G, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh 200, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Strainer Y-Type As, 300,0, Mfr. Std., Bw Ends,Sch 160, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A182 Gr.F9, Internals Ss 304, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 160, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type As, 300,0, Mfr. Std., Bw Ends,Sch 160, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A182 Gr.F9, Internals Ss 304, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 160, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Any Welds Shall Be Subject To Pwht , Strainer Y-Type Cs (Ibr), 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition), Ibr Certificate In Form Iiic Required. , Strainer Y-Type Cs, 800,0, Mfr. Std., Sw Ends,B16.11, Y Type , Removable Screen, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlay-, A105n, Internals Ss 304, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 1/2 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 3 For Normal, Operation (At Unclogged Condition) , Group -6 Supply Of Strainers (Moc - Ltcs)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =16 Nos ) , Strainer T-Type Ltcs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ltcs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ltcs (A+C), 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Amine+Caustic, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Ltcs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ltcs (Nace), 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Servicenace, Category 1, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Grl7m/A194 Gr7m, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Strainer T-Type Ltcs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ltcs, 300,0, Mfr. Std., Bw Ends,Sch 40, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Weld Factor E = 1.0, A420 Gr.Wpl6-W, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 40, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ltcs, 600,0, Mfr. Std., Bw Ends,Sch 80, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A420 Gr.Wpl6-S, Wn Flg A350 Gr.Lf2 Cl.1, Blind Flga350 Gr.Lf2 Cl.1, Sp Wd Ss316l+Grph, A320 Gr.L7/A194 Gr.4, Screen Ss 316, Other Inter.Ss 316, Mat. Deliv. Cond. Sch 80, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Group -7 Supply Of Strainers (Strainer Std Size Upto 12)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =62 Nos ) , Strainer T-Type Cs, 600,0, Mfr. Std., Bw Ends,Sch 80, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 80, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ss Dual, 300,0, Mfr. Std., Bw Ends,Sch 80S, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A403 Gr.Wp304/304L-S, Wn Flg A182 Gr.F304/304L, Blind Flga182 Gr.F304/304L, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Dual Ss 304/304L, Other Inter.Dual Ss 304/304L, Mat. Deliv. Cond. Sch 80S, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Strainer T-Type Cs (H2 Ser.), 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Ss Dual, 150,0, Mfr. Std., Bw Ends,Sch 40S, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A403 Gr.Wp316/316L-S, Wn Flg A182 Gr.F316/316L, Blind Flga182 Gr.F316/316L, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Dual Ss 316/316L, Other Inter.Dual Ss 316/316L, Mat. Deliv. Cond. Sch 40S, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 600,0, Mfr. Std., Bw Ends,Sch 80, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 80, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type As, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wp9-S Cl.1, Wn Flg A182 Gr.F9, Blind Flga182 Gr.F9, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 150,0, Mfr. Std., Bw Ends,Sch Std, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 5, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Std, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Group -8 Supply Of Strainers (Strainer Std Size More Than 12)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. (Qty =12 Nos ) , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch 30, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Weld Factor E = 1.0, A234 Gr.Wpb-W, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 30, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch 40, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Weld Factor E = 1.0, A234 Gr.Wpb-W, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 40, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). , Strainer T-Type As, 300,0, Mfr. Std., Bw Ends,Sch 60, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 3, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, Weld Factor E = 1.0, A234 Gr.Wp5-W Cl.1, Wn Flg A182 Gr.F5, Blind Flga182 Gr.F5, Sp Wd Ss316l+Grph, A193 Grb16/A194gr.16, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch 60, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary)., Any Welds Shall Be Subject To Pwht , Strainer T-Type Cs, 300,0, Mfr. Std., Bw Ends,Sch Xs, Designdrawer Type, G.A. & Dim. Details Acc. To, Doc No. Nr-0Zzzz-Pi-Spe-0020, Perforated Plateastm E674, Meshastm E2016, Mesh Size, Normal Operationmesh Type 4, Start-Up Overlaymesh 40 &, Wire Dia 0.254 Mm, A234 Gr.Wpb-S, Wn Flg A105n, Blind Flga105n, Sp Wd Ss316l+Grph, A193 Gr.B7/A194gr.2H, Screen Ss 304, Other Inter.Ss 304, Mat. Deliv. Cond. Sch Xs, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0007, Tk-1Zzza-Pi-Spe-0008, Tk-1Zzza-Pi-Spe-0012 And In-0042., Strainer With Drain Plug Assembly Of, 3/4 Npt., Clear Strainer Area To Nominal, Area Ratio Shall Be Minimum 1.5 For Normal, Operation (At Unclogged Condition), This Ratio Is Based On, Construction, Without Any Intermediate, Extension Spool Piece., I.E. As Per Nrl Drg., Strainer Shall Be Supplied With Start-Up, Overlay Element Fitted.Removal Of It Before, Normal Operation Shall Be By Easy Means, With Minimum Use Of Mechanical Tools., Alternatively Vendor Can Provide, Two Separate Elements I.E. One For Primary, Other For Secondary). => Limited

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	05-11-2024	Addendum_1_Extn1	Date	11-11-2024
2	12-11-2024	Addendum_2_Extn2	Date	18-11-2024
3	19-11-2024	2024_NRL_829358_1	Date	26-11-2024
4	27-11-2024	Addendum_4_Extn4	Date	03-12-2024

Refer document

Refer document