|
| 1 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as directed. |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as directed. |
| 3 | Taking down shutters of any description exc. 1.00 sqm but not exc. 2.00 sqm each complete all as directed. |
| 4 | Taking down shutter and refixing in same opening, shutters of any description exc.1.00 Sqm but not exc. 2.00Sqm each after necessary repair work including resecuring or easing and adjusting, complete all as directed. |
| 5 | Materials and labour for, plain cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) for fixing hold fast complete all as specified and directed. |
| 6 | Materials and labour for brickwork with sub class ‘B’ bricks, old size, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4) including demolition of brickwork or stone/ boulder masonry, built in cement mortar, complete all as specified and directed. |
| 7 | Material and labour for, 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all asspecified and directed. |
| 8 | Material and labour for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed. |
| 9 | Material and labour for 35mm thick 2nd class hard wood, factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | Supply and fix for, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 11 | Supply and fix for, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 12 | Supply and fix for, medium weight, cold rolled mild steel butt hinges,100 mm size, complete all as specified and directed |
| 13 | Supply and fix for, medium weight, stainless steel butt hinges,100 mm size,complete all as specified and directed |
| 14 | Supply and fix for, aluminium anodized barrel tower bolts of extruded section, 125mm long complete all as specified and directed. |
| 15 | Supply and fix for, aluminium anodized barrel tower bolts of extruded section, 150mm long complete all as specified and directed. |
| 16 | Supply and fix for, Extruded aluminium alloy handles, fabricated type, anodised 75mm size, complete all as specified and directed. |
| 17 | Supply and fix for, Extruded aluminium alloy handles, fabricated type, anodised 100 mm size, complete all as specified and directed. |
| 18 | Supply and fix for, Extruded aluminium alloy handles, fabricated type, anodised 150 mm size, complete all as specified and directed. |
| 19 | Supply and fix for, 75mm long aluminium hasp and staple with hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 20 | Supply and fix for, continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 30 mm (when open),complete all as specified and directed. |
| 21 | Supply and fix for, mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 22 | Supply and fix in repairs for, 150mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 23 | Supply and fix for, aluminium alloy, anodised, sliding door bolt, length of bolt 300 mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 24 | Supply and fix in repair for, 20mm dia stainless steel tubular type curtain rod with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 25 | Supply and fix for, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 26 | Supply and fix in repairs for, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 27 | supply and fix for, 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, complete all as specified and directed. |
| 28 | Supply and fix for, 50mm dia, polished, hard wood knobs fixed with screws, complete all as specified and directed. |
| 29 | Supply and fix for, aluminium (extruded section body) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 30 | Supply and fix in repairs for, aluminium (extruded section body) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 31 | Supply and fix for, brass 2 levers mortice lock,vertical type, size 100 mm, complete all as specified and directed. |
| 32 | Supply and fix in repairs for, hat and coat hooks, solid body,175mm to 250 mm, complete all as specified and directed. |
| 33 | Supply and fix for mild steel work such as bands, straps, supports or stays for rainwater, hand made sliding bolts; clamps; hold fasts; wall ties;and similar small articles conforming to Fe-290 Gde-E-165 including necessary welding, bending cold or hot, drilling holes for bolts in anyshape or size complete all as specified and directed. |
| 34 | Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 35 | Supply and fix for, 1mm thick mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed. |
| 36 | Supply and fix in repairs for, steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 complete all as specified and directed. |
| 37 | Supply and fix in repairs for, steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 complete all as specified and directed. |
| 38 | Supply and fix in repairs for, factory made steel ventilator with top hung shutter including hinges, steel peg stay, complete and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 complete all as specified and directed. |
| 39 | Supply and fix in repairs for, aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron), frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. |
| 40 | Supply and fix for, aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, 04 Nos aluminium hinges, aluminum with powder coating of any colour (Thickness of powder coating not less than 50 micron) snap beading screws etc., anodised aluminium fittings such as suitable 02 Nos aluminium barrel tower bolts of extruded section, lock (01 No), floor door stopper (01 No) etc., complete all as specified and directed. |
| 41 | Supply and fix for, aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No.), hinges type B-21, 100mm long (2 No.), suitable handle (01 No.) complete all as specified and directed. |
| 42 | Supply and fix for, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame 65 mm x 40 mm x 1.5 mm and aluminium with powder coating (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m with half portion provided with louvers made out of 4 mm thick figured glass, pin head typeand rest half portion provided with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc., (Thickness of aluminium sections not less than 1.5 mm), complete all as specified and directed.Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 43 | Supply and fix for, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame, 92 mm x 29.5 mm for three track sliding windows with one or more rebates including joining cleat for fixing etc., with sliding type shutters,without sash bars, aluminium sections with powder coated (minimum thickness of powder coating 50 micron) 39 mm x 20 mm including necessary joining cleats,glazing clips,rubber packing,anodised aluminium with powder coated (minimum thickness of powder coating 50 micron) snap beading,screws etc.(Thickness of aluminium sections not less than 1.5 mm),with suitable sliding & locking arrangement,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 4.8 mm thick sheet glass tinted,complete all as specified and directed. Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 44 | Supply and fix for, anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and directed. |
| 45 | Repair of steel window shutter not exceeding 1.00Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as directed. |
| 46 | Materials and labour for, anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screwsincluding dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness, complete all as specified and directed. |
| 47 | Supply and Fix for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws,fixed in ceiling flat or sloping including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness, complete all as specified and directed |
| 48 | Materials and labour for,18/19 mm thick veneered particle boards interior grade, solid core, general purposes type, faced with decorative veneer on both faces, fixed with screws to timber frame work as in cup board/ cabinet shutters including provision of sutable beading edging (with width equal to width of particle board) on exposed edges, complete all as specified and directed. |
| 49 | Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming toIS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 50 | Materials and labour for, non - skid ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, conforming to IS 15622, Grade B IIa,in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 51 | Materials and labour for, vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 52 | Materials and labour for, vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 53 | Material and labour for, 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20mm thick screed bedding in CM (1:3) including dismantling existing stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 54 | Material and labour for 50mm thick plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in, plinth protection laid to slope, finished the surface even and smooth without using extra cement including necessary form work to divide area in panels, finished the exposed edges fair or rounding or chamfering where directed and providing 6mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) including roughening of old concrete by picking, sweeping, clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 55 | Materials and labour for, rendering 15mm thick, cement plaster, in cement mortar (1:4) on surface other than fair face of brickwork and finished the surface even and smooth without using extra cement and applying two coats of exterior emulsion weather proof over a coat of primer including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 56 | Materials and labour for, rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finished the surface even and smooth without using extra cement and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick wall care putty including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 57 | Materials and labour for, rendering 10mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finished the surface even and smooth without using extra cement and applying three coats of white wash including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 58 | Materials and labour for, rendering 5mm thick, cement plaster, in cement mortar (1:3) on concrete surfaces on ceiling and finished surface even and smooth without using extra cement and applying three coats of white wash on ceiling including taking down cement plaster from concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. including preparation of new plastered or unplastered surfaces, complete all as specified and directed. |
| 59 | Material and labour for, 2mm thick wall care putty over plastered surface to prepare the surface even and smooth,complete all as specified and directed. |
| 60 | Material and labour for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed. |
| 61 | Supply and fix for, 3.00mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and directed. |
| 62 | Material and labour for, 4.80 mm thick sheet glass, tinted and glazing in square exc 0.5 sq.m in each pane, complete all as specified and directed. |
| 63 | Materials and labour for, 3mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 64 | Materials and labour for, 3mm thick, figured/ frosted glass pane and glazing with oil putty and pins/ spring pins in square not exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 65 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer,complete all as specified and directed. |
| 66 | Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 67 | Material and labour for preparation of old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 68 | Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 69 | Complete removal of existing treatment on walls and applying two coats of exterior emulsion paintover a coat of primer, complete all as specified and directed. |
| 70 | Material and labour for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of plastic emusion paint on walls, complete all as specified and directed. |
| 71 | Material and labour for, cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc.10cm girth but not exc.20cm girth, complete all as specified and directed. |
| 72 | Materials and labour for, 15mm bore galvanized steel tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 73 | Refixing and connecting 15mm bore steel tubing in new or old position(walls, ceiling, floors etc.) including taking up or down andcleaning steel tubing, complete all as directed. |
| 74 | Materials and labour for, 20mm bore galvanized steel tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 75 | Refixing and connecting 20mm bore steel tubing in new or old position(walls, ceiling, floors etc.) including taking up or down andcleaning steel tubing, complete all as directed. |
| 76 | Materials and labour for, 25mm bore galvanized steel tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 77 | Refixing and connecting 25mm bore steel tubing in new or old position(walls, ceiling, floors etc.) including taking up or down andcleaning steel tubing, complete all as directed. |
| 78 | Supply and fix in repairs for, 15mm dia bore, bib taps (long body), fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Cat No.Con-107KN of make Jaquar or equivalent model of make Kohler/ Grohe complete all as specified and directed. |
| 79 | Supply and fix in repairs for, 15mm bore dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 80 | Supply and fix in repairs for, 15mm bore dia angle cock with flange for iron pipe or for unions all as per Cat No.CON-059KN of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 81 | Supply and fix in repairs for, 20mm bore dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 82 | Supply and fix in repairs for, brass CP mixer with L bend for mixing hot and cold water screwed down for iron pipe of 15mm bore all as per Cat No.CON-273KNUPR of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 83 | Supply and fix in repairs for, sink mixer with swinging spout (wall mounted) with connecting legs and wall flanges, screwed for iron pipe 15mm bore as per Cat No.CON-CHR-309KNM of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 84 | Supply and fix in repairs, central hole basin mixer for WHB as per Cat No.CON-167KNB of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 85 | Supply and fix in repairs for, 15mm bore, bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed,complete all as specified and directed. (Minimum weight 15mm-90gms) |
| 86 | Supply and fix in repairs for, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as per Cat No.ACN-1171N of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 87 | Supply and fix in repairs for, toilet paper holder with flat recessed type of brass, chromium plated or stainless steel fixed to wall all as per Cat No.AKP-35751P of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 88 | Supply and fix in repairs for, soap dish (Polycarbonate) fixed to plug with chromium plated brass screws all as per Cat No.ACN-1131N of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 89 | Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect andspecified. |
| 90 | Supply and fix in repairs for, brass CP overhead shower rose 140mm size round shape single flow (ABS body chrome plated with grey face plate with rubit cleaning) with or without swivel joint and fixing to steel pipe all as per Cat No.OHS-1757 of make Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 91 | Supply and fix in repairs for, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 92 | Supply and fix in repairs for, geyser connections ( for hot & cold water) of length 450mm, all as per Cat No.F8070403 of make Cera or equivalent model of make as approved, complete all as specified and directed. |
| 93 | Supply and fix in repairs for, PVC collapsible waste pipe (31/32 x 950) mm all as per Cat No. 3274 of make Prayag or equivalent model of make Polytuff/Shakti, complete all as specified and directed. |
| 94 | Supply and fix in repairs for, 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 95 | Supply and fix in repairs for, vitreous China wash basin, white, flat back, size 550mm X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 96 | Supply and fix in repairs for, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 97 | Supply and fix in repairs for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) with \"P\" trap, 32mm dia PVC flush pipe including provision of PCC or lime concrete bedding and removal of debris complete all as specified and directed. |
| 98 | Supply and fix in repairs for, vitreous china single piece wash down water closet pan (Pedestal pattern), coloured of size 380 x 700 x 665mm including seat cover, hinges, dual flushing cistern, fixing accessories all as per Cat No. CNS-WHT-851P180SPP ofmake Jaquar or equivalent model of make Kohler/ Grohe, complete all as specified and directed. |
| 99 | Supply and fix in repairs for, PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 litres, including brackets, flush pipe, complete all as specified and directed. |
| 100 | Supply and fix in repairs for, vitreous china urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 101 | Supply and fix in repairs for, plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 102 | Supply and fix in repairs for, swivel shower of PTMT any colourfor fixing with 15mm pipe (Minimum weight 40gms) with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms), complete all as specified and directed. |
| 103 | Supply and fix in repairs for, ball valves high pressure of PTMT (Minimum weight142gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 15mm bore and fixed, complete all as specified and directed. |
| 104 | Supply and fix in repairs for, ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20mm bore and fixed, complete all as specified and directed. |
| 105 | Supply and fix in repairs for, PVC water tank cover suitablefor 250 to 1000 litres capacity with necessary fixing arrangement complete all as specified and directed. |
| 106 | Supply and fix in repairs for, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20mm bore, complete all as specified and directed |
| 107 | Supply and fix in repairs for, 600 mm X 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 108 | Supply and fix in repairs for, PVC cistern flush bend pipe long for IWC/ EWC including necessary connection & white cement work complete all as specified and directed. |
| 109 | Taking down and refixing of vitreous chinawash basin, white, flat back, size 550x400 mm excluding taps, waste, chain, plug & porcela stopper,complete all as directed. |
| 110 | Taking down and refixing of flushing cistern after necessary repair work including connection to IWC/ EWC and PVC connectioncomplete all as directed. |
| 111 | Taking down single piece WC including dual flushing cistern and refixing the same after necessary repair/ replacement work of flushing cistern assembly kit, complete all as directed. |
| 112 | Supply and fix in repair for, PVC cabinet size 650mm x 400mm, comprising of looking glass , space for bath soap, shampoo, tooth brush and paste, handle towel rail complete all as per Cat No.556 of make Prayag or equivalent model of make Hindware/ Cera/ Parryware,complete all as specified and directed. |
| 113 | Supply and fix in repairs for, stainless steel chromium plated tubular towel rail 600mm long all as per Cat No.AKP-35711PS of make Jaquar or equivalent model of make Kohler/ Grohe,complete all as specified and directed. |
| 114 | Supply and fix in repairs for, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, PVC waste pipe 800mm long and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 115 | Supply and fix for, stailess steel kitchen plate rack of overall size 786mm(L) x 914mm(W) x 254mm(D), complete all as specified and directed. |
| 116 | Disconnecting water tank from roof slab/ staging of single/ double/ triple storey building, float valve with float arm and outlet pipe from PVC service water tank, empting, cleaning and removing scales and dirt etc. from tank and mouths of circulating pipes etc and finally washing the internal surface with bleaching powder, closing wash outlet, refixing water tank in original position, including replacement of old tank nipple and GI union(ISI marked) and including minor repair if required and testing complete including writing \"Cleaned on ____(date) and next cleaning due on ____(date)\" on 2 feet height outer surface of tank with white paint after removing old \"date\" using paint remove for tank capacity exc.250 litreto 500 litre capacity complete all as directed. |
| 117 | All as per serial item No.116 here-in-before but exc. 500 litre and not exc.1000 litre |
| 118 | All as per serial item No. 116 here-in-before but exc. 1000 litre and not exc.2000 litre |
| 119 | Material and labour for, removing all vegetation bushes/ small growth not exc.15cm girth from the RCC roof slab/ water tank platform by cutting the surrounding area (not exc.300mm x 300mm) upto a depth of 25mm thick and making good the disturbed surfaces by PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) with and including WPC @3% by weight of cement and applying one coat of water proofing solution(Dr Fixit prime seal acrylic coating or equivalent) top of the disturbed area complete all as specified and directed |
| 120 | Material and labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including dismantling existing water tanks of capacity exceeding 250 litres but not exceeding 500 litres and removing to store, complete all as specified and directed. |
| 121 | Material and labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including dismantling existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and removing to store, complete all as specified and directed. |
| 122 | Supply and fix in repairs for, 40mm bore high density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. |
| 123 | Supply and fix fix for, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe, complete all as specified and directed. |
| 124 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe, complete all as specified and directed. |
| 125 | Supply and fix in repairs for, 75mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed. |
| 126 | Supply and fix in repairs for, 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed. |
| 127 | Supply and fix for, 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door, complete all as specified and directed. |
| 128 | Supply and fix for, 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door, complete all as specified and directed. |
| 129 | Supply and fix in repairs for, grating doom 100mm dia of PTMT(Minimum weight 25gms), complete all as specified and directed. |
| 130 | Supply and fix in repairs for, grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms),complete all as specified and directed. |
| 131 | Supply and fix in repairs for, PVC (SWR) floor trap, plain with grating,with diameter of outlet 75 mm, including jointing with solvent cement, complete all as specified and directed. |
