Tender For Special Repair And Maintenance Of Hatchery Outlet At Trout Fish Farm Dhamwari Distt Shimla Hp
Tender Value
1.69 Lakhs
Estimated cost
Bid Submission
22 Oct 2024
0 days left
EMD
3500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair And Maintenance Of Hatchery Outlet At Trout Fish Farm Dhamwari Distt Shimla Hp
BOQ
| Sl. No. | Item Description |
| 1 | Special repair and maintenance of hatchery outlet at Trout Fish FarmDhamwari , Distt Shimla (HP) |
| 2 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,in all respects in all leads and lifts as directed by E in C. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)complete,in all respects in all leads and lifts as directed by E in C. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.complete,in all respects in all leads and lifts as directed by E in C. |
| 5 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :Ordinary rock Pipes, cables etc. not exceeding 80 mm dia complete,in all respects in all leads and lifts as directed by E in C. |
| 6 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete,in all respects in all leads and lifts as directed by E in C. |
| 7 | Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) complete,in all respects in all leads and lifts as directed by E in C. |
| 8 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick complete,in all respects in all leads and lifts as directed by E in C. |
| 9 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover complete,in all respects in all leads and lifts as directed by E in C. |
| 10 | Providing and fixing ball bearing for rolling shutters. complete,in all respects in all leads and lifts as directed by E in C. |
| 11 | Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area complete,in all respects in all leads and lifts as directed by E in C. |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.150 mm dia nominal bore Medium grade pipe. complete,in all respects in all leads and lifts as directed by E in C. |
| 13 | Providing flanged joints to double flanged C.I./ D.I. pipesand specials, including testing of joints :150 mm diameter pipe (Including Flanges) complete,in all respects in all leads and lifts as directed by E in C. |
AI Tender Summary
Tender Timeline
Oct 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 22, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender