Construction Of Dighalibagan Line Road Under Ridf-Xxx Of Nabard For The Year 2024-25 Under Sarupathar Territorial Road Division Of Sarupathar Lac
Tender Value
95.09 Lakhs
Estimated cost
Bid Submission
24 Oct 2024
0 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sarupathar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Dighalibagan Line Road Under Ridf-Xxx Of Nabard For The Year 2024-25 Under Sarupathar Territorial Road Division Of Sarupathar Lac
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness asper Technical Specification Clause 201 (i) By Manual Means(a) In area of non thorny jungle |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I)Private Land |
| 3 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Private Land |
| 4 | Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheelroller to achieve the desired density, complete asper Clause 401. II) For Grading IIMaterial |
| 5 | Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels80-100KN static roller in stagesto proper grade and camber, applying and brooming stonescreening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.(3) Grading - III (Screening B).A) By Manual Means- |
| 6 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage.a) including Edge block/Edge restraints |
| 7 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm equilateral triangle |
| 8 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm circular |
| 9 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 10 | Utility Shifting as directed by Engineer in Charge |
| 11 | Earthwork in excavation for foundation of structure upto 3 m. depth as per drawing and technical specification clause 1104 including setting out construction of shoring and bracing, removel of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materials |
| 12 | Plain cement concrete M-10 (1:3:6 nominal mix) in levelling course below open foundation of head walls as per drawing and technical specification clause 1109 |
| 13 | Laying 1st class bedding on well compacted sand, moorum as per clause 115(ii)Granular bedding |
| 14 | Providing concrete for plain / reinforced concrete in open foundation complete as per drawing and technical specification clause 802, 803, 1202 & 1203.A. With cruahed stone. RCC Grade M20. Nominal mix 1:2:4 |
| 15 | Plain / reinforced concrete in Sub-structurecomplete as per drawing and technical specification clause 802, 804, 805, 806, 807, 1202 & 1204.A. With cruahed stone.(II) PCC Grade M20. ii)Nominal mix 1:2:4 |
| 16 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular materials in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary works in head walls and parapets clause 1106.-600mm dia |
| 17 | Plastering with cement mortar (1:4), 15mm thick on brickwork in sub-structure as per technical specification clauses 613.4 & 1204. |
AI Tender Summary
Tender Timeline
Oct 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender