Tender For Proposed Construction Of Cc Road And Drain At Ganga Nagar In Prabhag No. 11 For Municipal Council Jintur Dist.Parbhani
Tender Value
40.76 Lakhs
Estimated cost
Bid Submission
11 Oct 2024
0 days left
EMD
40767
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jintur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction Of Cc Road And Drain At Ganga Nagar In Prabhag No. 11 For Municipal Council Jintur Dist.Parbhani
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 3 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 4 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. |
| 5 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material |
| 6 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material |
| 7 | Construction of dry lean cement concrete Sub- base over aprepared sub-gradewith coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved byEngineer-in-charge , compacting withvibratory roller, finishing,curing andincluding preparation of sub-grade surface if required etc. complete.with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 8 | Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 9 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality andshape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete |
| 10 | Royalty Charges & Testing Charges |
| 11 | ROYALTY CHARGES FOR OTHER MINERALS |
| 12 | ROYALTY CHARGES FOR SAND |
| 13 | BASIC TEST OF AGGREGATE |
| 14 | HARD-MURUM COMPACTION TEST |
| 15 | COMPRESSIVE STRENGTH OF C.C CUBE (SET OF 3 CUBE) |
AI Tender Summary
Tender Timeline
Oct 04, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender