|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by E/I upto a distance of 30M from foundation trenches. SI .251a |
| 2 | Concrete with 4cm guage stone ballast,course sandand cement in proportion of 1:5:10 in foundation and under hoorsing all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 274 |
| 3 | M-150 Brick work in1:4 cement & four coarse sandin foundation and plinth including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-305(a) |
| 4 | M-150 Brick work in1:4 cement & four coarse sandin S/S including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-309(a) |
| 5 | 12 mm thick plaster with cement and coarse sandmotar 1:4 over brick work minimum thickness plinth with cement and coarse sand.S.I.no-584(a) |
| 6 | Cement Concrete with 2cm, guage approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc required for proper completion of the work. SI-279 |
| 7 | Suppy and laying of 80 mm thick precast cement concrete I- shape /zig-zag (all shape) interlocking coloured paver block with top layer of mininum 5 mm thickness having paln dimension of 200x(160+120)mm of O.P. cement smooth high gloss finish, skid resistant, manufactured with rubber moulds through vibro-compression mechanism over 4 cm blanket coat of fine sand & joint filling with fine sand. The compressive strength and weight of concrete paver block shall not be less than 40 MPaand 4.5 kg per including cost of materil, with blandket layer of 4.00cm thick fine sand including labour, vat , all taxes T&P. required for proper completion of the work as per specifications and as directed by Engineer-in-charge.New item - 14 |
| 8 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. S.I.No-644 |
| 9 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in R.C.C. Raft foundation and footing excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. {S.I. No-287a+diff. of 1:1.5:3 &1:2:4(284a-284)} |
| 10 | Supplying, Fitting and Placing un-coated HYSD/TMT bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 11 | Providing wall puttyon old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats |
| 12 | Artistic drawing/pinting workon wall with attrative muticolour paint as per direction of Engineer in-charge over and including painting too or more coats with approved supperior quality ready mixed paint over one coat of ready mixed priming paint including supply of all materials labour T&P etc. required for proper completion of the work. |
| 13 | M.S. or iron work in heavy sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. |
| 14 | Supply and fixing Galvanized iron roofing 24 BWG in position inculding supply of all materials, labour, tools and plant etc. requried for proper complication of the work and including wastage.S.I. No-536 |
| 15 | Supplying, fixing and keeping in position benches (3 seater each) as per design and drawing complete and as per instruction and approval of Engineer incharge.(MR) |
| 16 | Supply and fixing LED stand light (urbano LP 05-711-XXX-57-G1) 60W Wipro make or Similar as per approval of E/I |
| 17 | SWING: 2 Seater Supply, erection, testing and commissioning 2 Seater Swing (TPS03- SW) Dimension 4.6x1.6x0.8m or Equivalent with ISI Approved . The cost includes all petty material to complete in all respect as desired by engineer in charge. |
| 18 | SLIDE: Double Slide Providing and Fixing Double Slide Multiplay System (TPS-03-MP) Dimension 4x3.2x3 (13.3x10.5x9.8ft) or Equivalent with ISI Approved are made of MS structure with Fiber Slides. The cost includes all petty material to complete in all respect as desired by engineer in charge. |
| 19 | Providing and fixing of M.S. informatory sign board with frame of 40X40X5mm angle iron and diagonal braces of 25X5mm flat iron. 16 S.W. gauge M.S. Sheet shall be fixed on the M.S. Frame including one coat of ready mixed priming paint and two coats of apporved superior quality ready mixed paint on the whole structure and also painting letters on M.S. Sheet firmly fixed to the ground with 15 grade cement concrete 45X45X60cm B.G.L. Complete as per approved drawing and direction of Engineer-in-charge. (A.R.) |
