|
| 1 | Labour fr boring tube well of required dia, with top water jet system through any type of soil strata including tools &plants as necessary & taking out same including lowering pipes,strainer,blank pipe etc & fitting fixing same complete including bucket washing & other incidental works at this connection. The tube well should have a minimum 50mm gap in between the outside of the well pipe & the bore hole. For depth upto 150m for 50mm diaA with top enlarge of 100mm diai)100mm dia boring etc topenlargement54m |
| 2 | ii)40mm dia boring from 108m |
| 3 | B) For depth more than150m for 50mm dia i)40mm dia boring etc 98m |
| 4 | Washing and devlopment tube well with air compresour pump and engine for 8 hours continus pumping for day withnecessary arrengement for testing theyield yield in gallons per hour with v notch including hire and lobour charges for all tools and plants and scafoldind as requred complet in all respect. |
| 5 | Suppluing PVC rigid pipe and fitting conforming toASTM d1785 Shedule 40 and treated to match with GI pipe as per IS 1239 (Part-I)i) 100mm dia54m |
| 6 | B)40 mm dia pipe 186m |
| 7 | Supplying of U PVC rigid screen pipes (strainer) as per IS 12818/92 with letest amendment (2m Long)i) 50mm dia4Nos |
| 8 | Supplying of 100mmX40mm dia PVC reducing socket1no |
| 9 | Supplying, fitting,fixing steel cutter piece 450mm Long with socket. 1no |
| 10 | Supply of Solvent cement. |
| 11 | Supply of PVC pipes & fittings (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipe as per IS: 1239 (Par-I)40mm columm Pipe |
| 12 | Supply fitting fixing Submersible pump set and other accessories (Kirloskar)a) Supplying of 1 HP Submersible pump set for 100mm dia bore hole tube well 1HPLocal Rate |
| 13 | b) supply DT starter of approved make panal board (Havells)1no |
| 14 | c) 1.5sq cm 3core PVC electrical cable of approved quality.(Finolex)50m |
| 15 | Mobilizing charges for carrying boring set, pipe, scafolding and its assories belong to the contractor worksite. |
| 16 | Providing 100mm Guide (GI) with Clamp |
| 17 | Supplying fitting fixing approved quqlity 40mm dia GI adopter |
| 18 | Supplying fitting fixing GI cape at top 100mm |
| 19 | Supplying, fitting and fixing gunmetal wheel valve of approved brand andmake tested to 21 kg per sq. cm. (for water lines only).i)32mm dia |
| 20 | i)25mm dia |
| 21 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting willbe made seperately)For Exposed Work15mm |
| 22 | 25mm dia |
| 23 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 24 | Plat form & Water Tank, Soke pit etcas pae Scheme as estimate set no-1 |
| 25 | Prpviding fixing sign display board as per specification of size 900x750x37 mm th including bolt, washer etc complet |
