Tender For Renovation Of Community Hall At Ward No .03 Madhakoil Streetin Parangipettai Town Panchayat
Tender Value
15 Lakhs
Estimated cost
Bid Submission
09 Oct 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
parangipettai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Community Hall At Ward No .03 Madhakoil Streetin Parangipettai Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth workexcavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiffblack cotton, hard red earth shales ,murram, gravel, stoneyearth mixed with small size boulders etc completed as per std specification.SS20B |
| 2 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification . |
| 3 | Plain Cement concrete of mix 1:4:8 (One part ofcement, four part of sandand eight part of aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour chargesetc., complete as per standard specification |
| 4 | Steel centering for sides and soffitsincluding supports and struttingupto 1m height for plain surfacesuch as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gaugestiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm diaspaced at about 75cm centre to centre and suppor etc completed as per std specification.Ground Floor Columns |
| 5 | B) Grade beam |
| 6 | C) Lintel. Beam &slab |
| 7 | Supplying fabricating and placing in position of steel rods using TMT SteelISIincluding cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications. |
| 8 | Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part of sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry for Reinforced Concrete Works including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete |
| 9 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) usingbest Country III Class Bricks of size 8¾\"x4¼x2¾from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 10 | Collection Supply and Filling ofwell gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification |
| 11 | Special Ceiling Plastering in cement motor 1:3 mix (one part of cement and three part of sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per standard Specification |
| 12 | Plastering in Cement Mortor 1:5 Mix (one part of cement andfivepart of sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 13 | Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3 |
| 14 | Tilesflooring withbest quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments ncluding cost conveyance of all materials to site and labour charges,etc., complete as per standard specification |
| 15 | Dadooing wall Tiles withbest quality of colour tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments ncluding cost conveyance of all materials to site and labour charges,etc., complete as per standard specification |
| 16 | Supplying and fixing in Position of Indian water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete. |
| 17 | Weathering course concrete with broken brick jelly of 20 mm gauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32:12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly with springing lime jiggery water asper standard specification and as directed by the departmental officers Complete as per standard specification. |
| 18 | Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx2cm of approved quality laid in cement mortar 1:3 (One part ofcement and three part of sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etcComplete as per standard specification. |
| 19 | Painting the new walls two coats over one coat of priming with best weather proof Exterior Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officersComplete as per standard specification. |
| 20 | Painting the new iron work in all floor two coat of best synthetic enamel paintof approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications |
| 21 | Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed stair case light point/Fan Point (SD.NO.24) Page No -13 |
| 22 | Wiring with 2 x 1.5 sqm(22/0.3) insuheathedSc Cu Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and celing with PVC accessories with TW switch box and 5A F.T switch in flush with wall150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG T.C wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 36) Page No -20 |
| 23 | Supply and fixing of TNEB meter Board suitable for 16A SinglePhase service connection with 3 Nos. 16A Fuseunit &neutral link and earth link for fixing the TWplank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter fuse unit . |
| 24 | Supply and run of 2 of46 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm G.I pipe (Class \"B\" bent at both ends with necessary angle iron up right and end supports for mains(SD No.73)Page No -33 |
| 25 | Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on7/20 GI bearer wire for service connection mains(SD No.68) |
| 26 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88 |
| 27 | Supply and fixing ofAC Ceiling fan complete 1400mm (56”) sweep with300mm Down rod (Without regulator) (Lower end) |
AI Tender Summary
Tender Timeline
Oct 01, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender