Design, Construction, Supply, Installation , Trial Run And Commissioning Of Raw And Finished Material Chilling Plant Of 2X 10 Mtpd, Flake Ice Facility Of 2X10mtpd, Fish Processing Hall With Balance Civil Works , Elec, Mech, Refrigeration& Fire Protectionw, Ernakulam-Kerala

TDR : 45518265

Tender Notice
Corrigendum Details
BOQ

Expired

Ernakulam , Kerala

Tender Brief : Corrigendum : Design, Construction, Supply, Installation , Trial Run And Commissioning Of Raw And Finished Material Chilling Plant Of 2X 10 Mtpd, Flake Ice Facility Of 2X10mtpd, Fish Processing Hall With Balance Civil Works , Elec, Mech, Refrigeration& Fire Protectionw

Document Fees
₹ 11800 /-

EMD
₹ 200000.0 /-

Tender Value
Refer document

Submission Date
28-10-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	16-10-2024	Extension of Bid Submission Date	Date	28-10-2024
2	15-10-2024	Minutes of Pre Bid Meeting	Other	21-10-2024
3	08-10-2024	LINK OF PRE BID MEETING	Other	21-10-2024

Name of Work:Design, Construction, Supply, Installation , trial run and Commissioning of Raw and Finished Material Chilling Plant of 2X 10 MTPD, Flake Ice Facility of 2X10MTPD, Fish Processing Hall with Balance Civil works , Elec, Mech, Refrigeration& Fire protectionWorks etc., at PPC Thoppumpady (For KSIDC MFP) Kerala

Sl. No.	Item Description
1	BALANCE WORKS IN CIVIL - PROCESS BUILDING
2	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
3	Filling with contractor\"s own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
4	Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-incharge.
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
6	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
7	Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1.5:3 (1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mm nominal size)
8	Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
9	Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to beembedded in the pile cap etc, chipping and socketing of the pile as per drawing etc all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).<br>(Note: Minimum cement content considered in M-3O is @ 350Kg/cum as per IS 2911 : 2010 ) Nothing extra shall be paid on this accountFor 600 mm dia piles.
10	Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & thedirection of engineer -in-Charge. Single pile upto 50 tonne capacity Initial test
11	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account). All work upto plinth level.
12	Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
13	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account). All work above plinth level upto floor V level.
14	Add for using extra cement in the items of design mix over and above the specified cement content therein
15	Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
16	Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
17	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
18	Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
19	Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
20	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
21	Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick
22	Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
23	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
24	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
25	Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
26	12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
27	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
28	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
29	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
30	Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
31	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
32	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
33	Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm
34	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
35	Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
36	Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge.
37	Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
38	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
39	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimensioni.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
40	ProvidingandfixingfactorymadeuPVCwhitecolourfixedglazedwindows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extrudedglazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall,plasticpackers,plasticcapsandnecessarystainlesssteelscrewsetc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required)shallbealsofusionweldedincludingdrillingofholesforfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing&directionofEngineer-in-Charge.(Single/doubleglasspanes andsilicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
41	Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
42	Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
43	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
44	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelledand glazed shutters 25 mm to 40 mm thick: Particle Board 12 mm thickPlain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
45	Providing and fixing M.S. Grills of required pattern in frames of windows etc. With M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
46	Filling the gap in between aluminium frame & adjacent RCC/ Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawing and direction of Engineer-in -Charge complete.Upto 5 mm depth and 5 mm width
47	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
48	Re- alignment, repair, installing and fixing factory finished customized design prepgalavanized high tensile steel/ pre-engineered structural steel building/PEB including labour and machinery, cost of fasteners incuding bolts and packing, rust removal and cleaning , grouting, touchup paint and any other balance work in the aklready installed PEB structure , roofing and cladding at site.
49	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50	Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member.Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)50mm thick in Grade M 25 with cement content not less than 330 kg per cum
51	channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
52	COMPOUND WALL
53	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
54	Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
55	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
56	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
57	DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
58	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
59	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All work upto plinth level.
60	Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
61	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
62	Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
63	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
64	Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
65	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
66	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
67	Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for serarately) :- Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire
68	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
69	Providing and laying weep holes of 110mm dia PVC pipe 4kgf/cm2 @ 2m c/c in wall at selected location by Engineer in charge, complete as per drawing.
70	CULVERT & COVER SLAB FOR DRAIN
71	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
72	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
73	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
74	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
75	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
76	Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
77	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
78	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
79	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
80	Disposal of unwanted mateial up to 10 km excluding and unloading up to 10 k.m
81	PUMP ROOM ( Existing Building Renovation)
82	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All work upto plinth level.
83	Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
84	Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
85	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
86	Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
87	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
88	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
89	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
90	Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in- charge.10x120 mm
91	Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc.to the side hung windows as per direction of Engineer - in-Charge complete.255 x 19 mm
92	Filling the gap in between aluminium frame & adjacent RCC/ Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawing and direction of Engineer-in -Charge complete.Upto 5 mm depth and 5 mm width
93	Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc.complete.Powder coated minimum thickness 50 micron aluminium
94	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover Providing and fixing ball bearing for rolling shutters.
95	Providing and fixing ball bearing for rolling shutters.
96	Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
97	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
98	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
99	12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
100	6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
101	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
102	Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
103	Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
104	Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design:In 75x75 mm deep chase
105	Making Khurras 45x45 with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of near cement, rounding the edges, making and finishing the outlet complete.
106	GROUND LEVEL SUMP (New work)
107	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
108	Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc, chipping and socketing of the pile as per drawing etc all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).<br>(Note: Minimum cement content considered in M-3O is @ 350Kg/cum as per IS 2911 : 2010 ) 500 mm dia piles
109	Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityInitial test
110	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
111	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
112	Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III) : 4 graded stone aggregate 12.5 mm nominal size).
113	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account). All work above plinth level upto floor V level.
114	Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
115	Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
116	Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
117	Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
118	Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
119	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
120	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
121	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
122	Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25⁰C,0.87-0.89 kg/ litre and viscocity 70-160 cps.OVER the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23⁰C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N.Softening point of membrane not less than 150⁰C.Cold flexibility shall be up to - 2C whentested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick
123	Supply and fixing slotted cowl CI 100 mm dia
124	Providing and fixing soil, waste and vent pipes:100 mm diaSand cast iron S & S pipe as per IS : 1729
125	Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions
126	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design
127	Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
128	Steel work welded in built up sections/framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required.In gratings, frames, guard bar, ladder, railings,brackets, gates and similar works
129	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
130	Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
131	Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
132	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
133	OVER HEAD TANK (New work)
134	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account). All work above plinth level upto floor V level.
135	Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
136	Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
137	Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
138	Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
139	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
140	12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
141	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
142	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
143	Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25<sup>0</sup>C,0.87-0.89 kg/ litre and viscocity 70-160 cps.OVER the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23<sup>0</sup>C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N.Softening point of membrane not less than 150<sup>0</sup>C.Cold flexibility shall be up to - 2<sup></sup>C whentested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick
144	Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions
145	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
146	Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
147	Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
148	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
149	YARD CONCRETE PAVEMENT
150	Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with a motor grader on the prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Grading-I - Plant Mix Method
151	Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
152	Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing
153	PLUMBING & SANITARY WORKS
154	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
155	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
156	Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
157	Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.Semi rigid pipe40 mm dia
158	Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm
159	Providing and fixing uplasticised PVC connectionpipe with brass unions: 45 cm length15 mm nominal bore
160	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
161	Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
162	Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms
163	Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
164	Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge.
165	Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
166	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
167	Providing and fixing toilet paper holder:C.P. brass
168	Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
169	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
170	Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm GLASS
171	Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
172	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
173	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall25 mm nominal outer dia pipes
174	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall32 mm nominal outer dia pipes
175	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore BIB COCK toilet, other and OHT
176	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
177	Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms PUSH COCK
178	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
179	Providing and fixing PTMT grating of approved quality and colour. Circular type125 mm nominal dia with 25 mm waste hole
180	Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weightof cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mmnominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
181	Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P typeWith sewer bricks conforming to IS: 4885
182	Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weightof cover with frame to be not l bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weightof cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mmnominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
183	Extra for depth beyond 45 cm of brick masonry chamber: For 455x610 mm sizeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
184	Extra for depth beyond 45 cm of brick masonry chamber: For 600x850xmm sizeWith common burnt clay F.P.S. ( non modular) bricks of class designation 7.5
185	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes
186	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge.External work100 mm nominal inner dia pipes
187	Providing and fixing toilet paper holder:C.P. Brass paper holder
188	Providing and fixing soil, waste and vent pipes:100 mm diaSand cast iron S & S pipe as per IS : 1729
189	Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall soil waste pipe
190	Supply and fixing water level indicator with control mechanism
191	Supply, installing, testing and commissioing of 3 Nos. Centrifugal pump (2 W + 1S ) for pumping domestic water from collection sump to the OH tank . The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame. The pump shall be suitable for the following requirements: Flow rate of each pump - 60.00 Cu.m / hr. Head - 20 Mtr. Including Suitable indoor wall mounting typecontrol panel with auto / manual change - over switch including dry run protection arrangement, wiring upto panel, earthing etc. complete.
192	Supplying 2 nos ( 1W + 1S ) submersible bottom suction cutter pump having 1.1KW/1.5hp/ 3 phase motor capable of delivering 2.5lps@ 5 mtr head.A common wall mounting micro controller based control panel for the working of 2 pumps ( 1w+1S ) according to the demand . The control panel should have inbuilt level controller , overload/ under load protection, dry run prevention, phase reversal protection, voter meter/ammeter, automatic changeover of pump on every start stop cycle , auto change over of on faulty pump , digital display , float switch for automatic operations etc . (Sullage & Sewage transfer)
193	INTERNAL & EXTERNAL WATER LINE
194	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
195	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge.External work50 mm nominal outer dia pipes
196	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
197	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
198	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
199	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,brackets, gates and similar works
200	Providing and placing in position filters of 40 mm diameter G.I pipe with brass strainer of approved quality
201	Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):50 mm dia
202	ELECTRICAL WORKS
203	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
204	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
205	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
206	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
207	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
208	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
209	Supplying and fixing danger plate 440 volts written in two languages.
210	Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
211	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
212	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
213	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.10 pair
214	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
215	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet- RJ 45WITH COVER
216	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
217	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
218	Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
219	Supply, installation, testing and commissioning of following port data switches with rack, therate shall be inclusive of all required civil works, Make: Netgear/Digilink
220	Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
221	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
222	Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
223	Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
224	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
225	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CBIRCCB/Isolator8 way, Double door
226	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
227	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
228	Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
229	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
230	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
231	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Upto 35 sq. mm
232	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
233	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
234	Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
235	Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
236	Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
237	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm
238	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 35 sq. mm and upto 95 sq. mm
239	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm
240	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm
241	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
242	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
243	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
244	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
245	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
246	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
247	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
248	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
249	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)
250	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
251	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
252	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.3 1/2 X 120 sq. mm (45mm)
253	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
254	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)
255	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
256	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
257	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
258	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
259	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
260	Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
261	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
262	Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
263	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
264	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
265	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
266	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
267	Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.
268	Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
269	Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:240 sq. mm
270	Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
271	Supplying and making outdoor cable end termination with heat shrinkable jointing kit completewith all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductorcable of 11 KV grade as required :300 sq. mm
272	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 120 sq. mm
273	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade offollowing size in the existing masonry open duct as required.Upto 120 sq. mm
274	Supplying and fixing Krone connectors of the following sizes in recessed GI/ Cadmium platedMS box fixed in the wall including making connections etc as required. (15 pair).
275	Supply, erection and commissioning of vertical and horizontal type cable trays and cable supports fabricated out of MS Angles and MS flats with sufficient width annd spacing between successive cross members and supported at adequate spacing. The cable trays and supports shallbe painted with two coats of Zinc chromate primer and two coats of enamel paint.
276	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2CX 2.5 sq.mm
277	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4CX 2.5 sq.mm
278	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 8CX 2.5 sq.mm
279	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 2Cx2.5 Sqmm Ar, Al.
280	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx2.5 Sqmm Ar, Al.
281	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 8C X2.5Sqmm
282	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx10 Sqmm Ar, Al.
283	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx16 Sqmm Ar, Al.
284	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx25 Sqmm Ar, Al.
285	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx70 Sqmm Ar, Al.
286	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx95 Sqmm Ar, Al.
287	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx120Sqmm Ar, Al.
288	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx240Sqmm Ar, Al.
289	Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx300Sqmm Ar, Al.
290	APFC Panel (15kVAr):Supply and MS fabrication of APFC Panel ,Sheet: 14/16 SWG CR sheet Paint : Siemen’s grey with powder coating RYBPhase Indication Lamps Ideal Make - 3Nos Digital Multi Function Meter -1 Nos Current Transformer 50/5A 15VA class 1 - 3 Nos with required sencing CT - 1 sets Busbar Support : SMC Busbar size :100A,TPN,3phase,4 WIRE AL . BUS Incomer 100A TPN MCCB - 1nosOutgoing - 15 kVAR (Multi stages capacitor bank with different ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB& ON OFF push buttons, ON/OFF/Trip Indication lamps with required accessories etc)
291	APFC Panel (45kVAr):Supply and MS fabrication of APFC Panel Sheet: 14/16 SWG CR sheet Paint : Siemen’s grey with powder coating RYBPhase Indication Lamps Ideal Make - 3Nos Digital Multi Function Meter -1 Nos Current Transformer 160/5A 15VA class 1 - 3 Nos with required sencing CT - 1 sets Busbar Support : SMC Busbar size :160A,TPN,3phase,4 WIRE AL . BUS Incomer 160A TPN MCCB - 1nosOutgoing - 45 kVAR (Multi stages capacitor bank with different ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB and ON OFF push buttons, ON/OFF/Trip Indication lamps with required accessories etc)
292	Common Panel: Supply and MS fabrication of Common Panel sheet: 14/16 SWG CR sheet Paint : Siemen & grey with powder coating RYB Phase Indication Lamps Ideal Make - 3 nos , Digital Multi Function Meter -1 Nos, Current Transformer 160/5A 15VA class 1 - 3 Nos Busbar Support : SMC, Busbar size :160A,TPN,3phase,4 WIRE AL . BUS,Incomer ,160A 4P Manual , hangeover - 1 nos, Outgoing, 100A 4P MCB -3 nos, 63A 4P MCCB - 2 nos , 40A DP MCB - 1 nos Busbar size :400A,TPN,3phase,4 WIRE AL . BUS, comer, 400A 4P MCCB - 2 nos of EB & DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set are AMF operation) Outgoing, 200A 4P MCB - 2 nos,160A 4P MCCB - 1 nos , 100A 4P MCCB - 7 nos 63A 4P MCCB - 2 nos ,Busbar Support : SMC Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB - 1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicatingmultifunction meter, O/C, UV/OV, E/F relay etc
293	MDB:Supply and MS fabrication of MDB Panel Sheet: 14/16 SWG CR sheet Paint : Siemen’s grey with powder coating RYBPhase Indication Lamps Ideal Make- 6 nos Digital Multi Function Meter -2 Nos,Current Transformer 400/5A 15VA class 1 - 6 Nos Busbar Support : SMC Busbar size :400A,TPN,3phase,4 WIRE AL . BUS Incomer 400A 4P MCCB - 2 nos of EB & DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set are AMF operation) Outgoing200A 4P MCB - 2 nos ,160A 4P MCCB - 1 nos,100A 4P MCCB - 9 nos,63A 4PMCCB - 5 nos
294	Panels: Supply, erection,testing and commissioning of floor /wall mounting type distribution board. The DB shall comprise of Al bars as applicable,bus barsof adequate size, brass neutral link, earthingwith suitable number oftaps. The incoming/outgoing cable entry shall be designed according to ACB/MCCB/SFU's rating. The cable entry/gland plate shall be at bottom/top. The gland plate shall be removable and 3mm thick. The enclosure shall be of 2mm thick CRCA sheet steel. The colour shade shall be RAL7032. The mounting channels of adequate size to be provided. The complete board shall be manufactured as per the standard practice and shall meet the requirements of other relevant authorities.This including all components, hardware's, all connected civil works etc.The contractor to submit vendor's general arrangement & scheme drawings along with CPRI certificate and approval & manufacturing clearance to be obtained for engineer in-chargeMAIN PANEL: Supply and MS fabrication of main Panel Sheet: 14/16 SWG CR sheet Paint : Siemen’s grey with powder coating RYBPhase Indication Lamps Ideal Make - 3Nos Digital Multi Function Meter -1 NosCurrent Transformer 630/5A 15VA class 1 - 3 Nos Busbar Support : SMCBusbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA EB Incomer630A 4P MCCB - 1nos, (microprocessor based MCCB) Outgoing400A 4P MCCB - 3 nos, 200A 4P MCCB - 1 nos, 160A 4P MCCB - 1 nos, 100A 4PMCCB - 1nos, 63A 4P MCCB - 1 nos with followings, 2 nos of Trivector Energy meter shall be provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicating multifunction meter, O/C, UV/OV, E/F relay etc
295	Supply and fixing carbondi oxide fire extinguisher type 4.5 kg capacity.
296	Supplying of fire bucket painted red & approved quality (set of 4 buckets).
297	Supply and laying of 11 KV Grade, Elastemer Polymer 2.5mm thickness
298	Supply and fixing Hand gloves suitable for 415 V
299	supplying and fixing of shock treatment chart.
300	Supplying of first aid box.
301	Supply and transportation of 12W, 1200 lumens, 600mm length LED batten tube light, housing made with PC body, wide operating voltage with Single / double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / Wipro / Crompton / Bajaj / HavellsLED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
302	SUPPLY OF FITTING & FANS:Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM
303	Supply and transportation of 70W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's, System efficacy >100 lm / Wand junction temprature < 70°C, with Ingrees protection IP65, IK05, Driver surgeprotection 4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with BIS certification with warranty 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / CROMPTON / BAJAJ / WiproLED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / LG LEDs.
304	Supply, fabricating & erection of 1.8 mtr high chain link fencing (50mm cross link) over 600 mm high brick masonry, using 4 mm thick GI chain link with a framework of 50x50x6 mm MS angle between vertical posts of ISMC 75x50mm at 2400 mminterval, which are fixed to the concrete footing (1:2:4) of size 450x450x200 mm (above GL) with adequate footing depth, between the brick / block masonry. Brick / block masonry (345 mm thick) and 200 mm from ground level for foundation & plinth in cement mortar (1:6). The brick masonry is to be pointed using cement mortar 1:3 to have a flush finish. Earth strip shall be connected to the fencing for its earthing.The MS framework for chain link fencing is finished using zinc chromate primer & 2 coats of synthetic enamel paint. 1.5 mtr wide gate shall beprovided with suitable locking arrangements.The rate shall be inclusive of all materials, labour, lead, lift, etc including excavation works and fabrication and assembly works including all nuts, bolts & other miscellaneuos items, etc.complete
305	Supply of 8" (200 mm) 20 W / 1500 RPM BLDC exhaust fan with necessary accessories etc., completeMakes : Atomberg / Crompton / Havells / Orient.
306	Supply, Transportation of energy efficient decorative fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMM/W) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete. Makes : Atomberg (Efficio + ) / Havells / Orient / RR / Halonix
307	Supply and transportation of 150W LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Wipro LED MAKE : PHILIPS LUMILEDS / OSRAM / SAMSUNG
308	MV SWITCH GEAR - TRANSFORMER: S.I.T.C of suitable for outdoor type plinth mounted 400kVA, 11/0.433kV oil cooled transformer with OLTC including all accessories. The degree of protection shall be suitable for outdoor application. The transformer shall be designed to suit design temperature of 50deg.The py shall be suitable for 1Rx3C x 150Sqmm 11KV Al, Ar cable and Sy shall be suitable for 3Runs of 3.5Cx300sqmm cable. All standard accessories shall be provided like, name plated with tech details, lifting hooks, jacking pads, breather, bidirectional rollers, winding temperature indicators, relays, alarm and trip contacts etc., Painting shall be carried out as per IS, shade is 631, impedance of the transformer shall be as per IS. The transformer shall be provided with suitable neutral CT to cater REF protection.The equipment shall satisfy Indian standards, local governing authorities, fire etc.,Rate shall be forthe complete Transformer with connected civil works etc. The contractor to submit vendor's general arrangement & scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
309	Supply installation testing and commissioning ofNCT as per local EB standard
310	Supply & Installation of 5HP DOL starter with isolator (Water pump)
311	HT CABLING: Supplying of XLPE insulated, heavy duty, aluminium conductor. 11KV grade armored. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970 Make: Polycab/Finolex 11KV Grade, 3Cx300Sqmm Ar, Al.
312	Supply and installation of emergency OFF trip push button with front Glass and painted in RED Colour.
313	Supply and installation of HT TOD meter , CL:- 0.2S, 3Ph, 4 wire in HT Metering Panel. The rate includes Testing of TOD from TMR dvision ( Excluding statutory fees)
314	HT Metering Panel: Supply, erection,testing and commissioning of outdoor floor/wall mounting type HT panel with EB metering with wiring arrangement. The panel shall comprise of Al bars as applicable,bus barsofadequate size, brass neutral link, earthingwith suitable number oftaps. The panel shall comprise as per outdoor IP protection.The incoming/outgoing cable entry shall be designed according to ACB/MCCB/SFU's/LBS rating. The cable entry/gland plate shall be at bottom/top. The gland plate shall be removable and 3mm thick. The enclosure shall be of 2mm for non load bearing members and 2.5mm for load bearing members thick CRCA sheet steel. The colour shade shall be RAL7032. As per local EB standard protection relays to be considered. The complete board shall be manufactured as per the standard practice and shall meet the requirements of other relevant authorities.This including all components, hardware's, all connected civil works etc.The contractor to submit vendor's general arrangement & scheme drawings along with CPRI certificate and approval & manufacturing clearance to be obtained for engineer in-charge.Load break switch with earth to considered 11kV, 26.2 kA, 630A three phase, 11kV indoor Resin Cast CT, (CT ratio and fuse rating as per EB suggestion), 10 VA burden, class 0.2 S, 11kV/110V, 25VA, CL 0.2 voltage transformer, TOD metering (supply, testing, erection and commissioning), aluminimum busbar with supporting insulator, HRC fuses, shunt trip coil 230V AC, space heater with thermostat, indicating lamps, required supporting arrangements, lightning arrester arrangement, interlock arrangement, fencing arrangemnet, necesory earthing etc as required.
315	RMU: Supply, Installation, Testing and commissioning ofCCV type outdoor RMU unit with2Nos. motorized LBS + 1No motorized VCB including civil works for the foundation
316	DG - 160 kVA (with AMF Panel): Supply, erection, testing and commissioning of the followingcapacity 415V DG's shall have in-built or separate AMF panel, diesel tank, AVP, acoustic enclosures shall cater to the allowable dB level as per statutory norms. The enclosure shall be fully weather proof to meet IP55, the engine shall be four stoke, 1500RPM, designed for operating in high speed diesel, water cooled type.Suitable civil foundation shall be part of the job. The entire job shall fulfill CPCB IV / any statutory norm. Supply, erection, testing and commissioning of suitable capacity diesel tank including level monitor, the tank shall be located closer to the DG, it shall be mounted on structural platform. The tank and the DG shall be properly connected by pipe lines including valves, flame proof motors, the pipe lines shall be supported properly. The drawings showing the entire arrangements shall be submitted and obtain approval from owner/consultant. Design, drawings, supply, erection, testing and commissioning of exhaust chimneys, required stack, Silencers required civil/structural/painting works, obtainingapproval & necessary certificate from authority. exhaust chimney shall be taken above the building and upto suitable heights conforming to the statutory regulations by Environment authorities. The chimney shall be self supporting with all necessary civil / structural/paintings works. For exact locations of the DG shall be referred in the respective layouts The contractor to submit vendor& general arrangement &scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
317	HT CABLING: Supplying of XLPE insulated, heavy duty, aluminium conductor. 11KV grade armored. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970 Make: Polycab/Finolex 11KV Grade, 3Cx150Sqmm Ar, Al.
318	Liaison and supervising Charge for local EB and CEAapproving authorities
319	FIRE PROTECTION SYSTEM
320	Supply, Installing, testing and commissioning of Heavy class M.S pipe, Class-C ERW (as per IS-1239 Part-1) laid in under ground (1 Mtrs below ground level). The quoted rate shall includes necessary specials like long radius bends, tees, including cutting, welding / flanged joints with necessary washers, nuts, bolts, etc.also include for providing concrete anchor blocks at all change in direction of pipeline if necessary and also near each joints. The quoted rate shall includes Wrapping & Coating of Under groundM.S. Heavy Grade Pipe -This corrosion protection tape shall comprisecoal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line. The wrapping & coating tape to be cut to 200mm wide and wounding on pipe. Minimum 2.8m tape of 200mm wide per 150mm pipe shall be considered.a. 150mm nominal dia pipe
321	Providing, laying, testing & commissioning of C- class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia
322	Providing, laying, testing &commissioning of C-class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia
323	Providing, laying, testing & commissioning of C-class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia
324	Providing, laying, testing & commissioning of C- class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :32 mm dia
325	Providing, laying, testing & commissioning of C- class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :40 mm dia
326	Providing, laying, testing & commissioning of C- class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm dia
327	Providing, laying, testing & commissioning of C- class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/supportframe and painting with two or more coats of synthetic enamel paint of required shade complete as required :65 mm dia
328	Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as requiredsingle headed Gunmetal
329	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as requiredl50 mm dia
330	Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stain1ess Steel (Grade 304)
331	Supplying &fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun metal
332	FIRE DETECTIONAND ALARM SYSTEM (CONVENTIONAL)Supp1ying,installation, testing & commissioning talk back slave station in surface/ recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/ microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
333	Supplying, installation, testing & commissioning of addressable manual call point complete as required.
334	CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
335	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. Mm
336	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
337	PUBLIC ADDRESS SYSTEMSupplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
338	Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 88 m Head
339	Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 70 m Head
340	Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head
341	Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A Outgoings ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 200 A, 50kA TPN MCCB, Ics=l00% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manua1/OFF operation. Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
342	Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings 630A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps Outgoings (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 250 A, 50kA TPN MCCB, Ics=l00% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
343	Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500AmpsOutgoings ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pumps 125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets Jockey Pump 63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
344	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :80mm dia
345	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : l50mm dia
346	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 &p1usmn; 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to haveseamless integration with analog/digital voice evacuation system ( which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol Bacnet/ Modbus over IP complete as per specifications.INTELLIGENTFIRE ALARM SYSTEMTenLoo Panel
347	Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
348	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.80 mm dia
349	Supplying and fixing first-aid Hose Ree1 with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m
350	Supplying and fixing of fire brigade connection of cast iron body with gun metal maleinstantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe
351	Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
352	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, centre bracket, stock bar of following sizes complete as required.1000mm
353	Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. Complete 450mm nominal dia
354	M.S. Hose cabinet, stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted (4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x750 mm x 250 mm. Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside.
355	FIRE EXTINGUISHERS Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity. ABC powder type fire extinguisher of 6 Kgs. Capacity,Mono Ammonium Phospate Powder 90%, Stored pressure type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle etc. Complete. Confirming to IS:15683
356	Booster pump control panel : (at terrace 32 Amps.TP&N SFU with HRC fuses with 10 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,se1ector switch for local/remote,auto/manual/OFFoperation.
357	Supply, erection, testing & commissioning of electrical motor driven Booster pump of Monoblock type capable to deliver 450 LPM at 35MWC.The pump shall be coupled to motor of suitable 10 HP and 2900 RPM with complete set shall mounted on common base frame. ( as recommended by manufacturer) and Foundation bolts etc.
358	Providing and fixing in position the sign boad of " EXIT " with arrow to be placed at parking levels by hanging on ceiling to direct cars / occupants to outside the building in an emergency. The exit sign board will be auto glow (photoluminiscent) type which will glow atdark. The size of signage shall be minimum 8"x 16"
359	Providing and fixing in position the sign board In case of Fire Break the Glass- with Manualcall Point symbol
360	Providing and installing in position the following tupe of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective selfadhesive vinyle painted foam board, complete with mirror fasteners. Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 6
361	FIRE DETECTIONAND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required.
362	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material etc. complete. 50MM nominal dia
363	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows- 80 MM DIA
364	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows
365	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows- 100 MM DIA
366	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows- 150 MM DIA
367	Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to l50mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in/ on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls /floor and making them good with filler material etc. complete. 200mm nominal dia
368	Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables. The minimumcable tray size shall be 300mm x 75 mm depth.
369	G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. (Earth pit shall be executed by other agencies).
370	Supplying, Installing, testing and commissioning of C.I. sluicevalves conforming to BS 5155 (PN 1.6) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete.l00mm nominal dia
371	Supplying, Installing, testing and commissioning of C.I. sluicevalves conforming to BS 5155 (PN 1.6) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. 200mm nominal dia
372	Liaising works for Fire Protection system as per NBS standards
373	Designing, supplying, installing and Commissioning of Refrigeration system for Raw & Finished Chill room,Fish Processing Hall, as per the follwing details and technical specifications: The refrigeration system shall be operating with CFC free R404a Freon gas, split type of suitable capacity with Air Cooled Condensing Units located outside the rooms and the Evaporator Units located inside the rooms with interconnecting copper piping & cabling works. The Air Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Oil seperator, Suction Accumulator, & Liquid line valves & Controls, Temperature Sensor & Thermostat (For Room Temperature Control) .Micro-processor based Electrical starter panelwiththe controller of Dixcell/Carrle make which will have BMS compactabilit .The condensing units shall be worked with the maximum ambient conditions of 45 Deg C . The evaporator cabin shall be constructed using GI powder coated casing. All the refrigerant tubes shall be with copper construction & Al fins. The evaporator shall be provided withthe minimum fins spacing of 6-7 mm to allow sufficient frost build up to enable longer operation hrs between defrost. Defrost shall be electric typefor chill room. The evaporator shall be Eurovent certified . The evaporator shall be provided with heaters for Coil,tray and Fans as the same are working under very low tempertaure applications.By considering the very high humid conditions of our area,we are proposed to have double tray with 20 mm insulation for the drain applications. The expansion valves shall be of TEXV for precising the refrigerat flow to the evaporator based on the various load conditions. Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters. The job shall also include to supply and installing inside the chill rooms safety hooter with switch & first charge of refrigerant gas. All the necessary electrical fixtures andControl panel board including all the switches, breaker and control points required for the refrigration system and Processing buildingshould be propoerly designed and installed as per the IS standards.The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, trail run and supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc. **For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
374	Supply of Refrigeration & Puf Panels & Accessories for Raw & Finished Chill Room : Designed Room temperature(+)20°C ± 5°CProduct to be processed : Fish / Sea food, No of Chambers: 2Nos Room Description: CH-1 : 1no\"s. of 11.50 x 15.28 x 5.0 m ( clear dimensions) & CH-2: 1no\"s. of (11.50 x 15.28 x 5.0 m + 22 x 10.84 x 5.0 m) Clear insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination. Doors : 1200 x 900 mm Chute Door -8 No\"s with suitable Air curtain, Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on tFour sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories. For Deatiled Specifications Please Reffer Technical Document Refrigeration Works.Type of refrigeration system : Split TypeType of Cooling: DX TypeCapacity of Refrigeration system [KW] :CH-1: 12 kW & CH-2: 24kW Type of Refrigerant: R404a / R134a / R407C Type of compressor: Scroll type Hermetic compressor with Suitable Canopy for Condensing Unit, Type of Condenser: Air Cooled - 6kW @ 2 no\"s for CH-1 & 6kW @ 4 no\"s for CH-2., type of Evaporator unit: Forced Air Cooled. 6 KW capacity,Eight No\"s for Fish processing Hall with GI Powder Coated casing,Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mountedwithsuitable Air flow as per design requirement. For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
375	Installation & Comissioning of Raw & Finished material Chill Room :
376	Supply of Refrigeration & Puf Panels & Accessories for Fish Processing Hall : Designed Room temperature(+)20°C ± 5°C, Product to be processed : Fish / Sea food, No of Chambers: 2Nos , Room Description: CH-1 : 1no\"s. of 11.50 x 15.28 x 5.0 m ( clear dimensions) & CH-2: 1no\"s. of (11.50 x 15.28 x 5.0 m + 22 x 10.84 x 5.0 m) Clear insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination. Doors : 1200 x 900 mm Chute Door -8 No\"s with suitable Air curtain, Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on tFour sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories. For Deatiled Specifications Please Reffer Technical Document Refrigeration Works.Type of refrigeration system : Split Type , Type of Cooling: DX Type ,Capacity of Refrigeration system [KW] :CH-1: 12 kW & CH-2: 24kW,Type of Refrigerant: R404a / R134a / R407C,Type of compressor: Scroll type Hermetic compressor with Suitable Canopy for Condensing Unit,Type of Condenser: Air Cooled - 6kW @ 2 no\"s for CH-1 & 6kW @ 4 no\"s for CH-2. Type of Evaporator unit: Forced Air Cooled. 6 KW capacity,Eight No\"s for Fish processing Hall with GI Powder Coated casing,Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mountedwithsuitable Air flow as per design requirement. For Deatiled Specifications Please Refer Techniacl Document Refrigeration Works.
377	Installation & Comissioning of Fish Processing Hall :
378	Supply ofPuf Panels, Accessories & Storage Rack for Chemical Room :Chamber Size: CH-1: 4.0 x 3.0 x 5.0 m & CH-2: 4.0 x 3.85 x 5.0 m & ( clear dimensions) No. of Chamber : 2No.s ,Product to be stored: Dry & Wet Chemicals etc..Room Description: 2 no\"s. ofCH-1: 4.0 x 3.0 x 5.0 m & CH-2: 4.0 x 3.85 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination . Door: 1200 x 2100 mm Room Door -2 No & 1200 x 900 mm Chute Door -2 No\"s with suitable Air curtain (2 No\"s), Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on three sides for Hall door & Four sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories. **For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.Flat Angled Rack System for Storage of Chemicals: \"Supplied for Two Rooms\" A. No. of Bays: 4 No’s, B. Size of each Bay: 900 L x 450 D x 2450 H, C. No. of Panels (Shelves) in each Bay: 5 No’s, D. Size of each Panels (Shelve): 900 L x 450 D x 612 H, E. Total no. of Shelves ( 4bays x 5shelves) : 20 No’s, F. Load on each Shelve : 150 kg’s G. Load on each Bay : 750 kg’s  Material of construction: EN10025 – S235JR HR P&O The uprights are Galvanized and Panels are Galvanized. All racking components comply with the latest German safety regulation in DIN 18800. The concrete of the floor will not have magnesite as a component to avoid the chemical reaction with the base plates, which will be galvanised. All the fasteners will be galvanized
379	Installation & Comissioning of Chemical Room :
380	Designing, supplying, installing and Commissioning of Flake Ice Generator as per the follwing details and technical specifications:Flake ice Room is constructed with 80mm thick RPUF panel, Flake Ice generator should be made with Stainless Steel food grade quality freezing surface with machine accessories. Water Cooled condensing uint complete with shell & Tube Condenser with cooling tower/Evaporative type & Reciprocating/Screw type Semi-Hermetic/Open Compressor with suitable receiver and Control Panel. The refrigeration system shall be operating with CFC free R404a Freon gas, of suitable capacity with Water Cooled Condensing (Shell & Tube with Cooling Tower/Evaporative) Units located outside the rooms and the flake ice generator Units located inside the rooms with interconnecting copper piping & cabling works. The Water Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Suction Accumulator, & Liquid line valves & Controls, Electrical Contral panelwiththe Complete system.The condensing units shall be worked with the maximum ambient conditions of 40 Deg C & The expansion valves shall be of TEXV/Electronic type for precising the refrigerat flow to the flake ice generator based on the various load conditions. GI Water Piping between cooling Tower to Condensing uint with necessery NRV, Strainers & Valves, Water pumps for water circulation. Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters.The job shall also include to supply and installing insulation to refrigeration suction piping along with GI/rubber cladding All the necessary electrical fixtures and control panel board including all the switches, breaker and control points required for the refrigration system should be propoerly designed and installed as per the IS standards. The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc**For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
381	Supply of Flake Ice Generator, Refrigeration & Puf Panels & Accessories for Flake Ice Room : Designedtemperature(-)24°C to (-)27°C , Product: Flake Ice, Capacity: 10 MTPD No of Chambers: 2 NosRoom Description: 2 no\"s. of CH-1 : 4.0 x 3.0 x 5.0 m & CH-2 : 4.0 x 3.85 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PCGI/PCGI lamination & 80mm thick PUF slab for floor Insulation . Door: 1200 x 2100 mm Room Door -2 No with suitable PVC strip curtain , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PCGI/PCGI lamination on both sides. PPGI wall frame on three sides, & Raising hinges, Handle, Key lock and and emergency release opner from inside & floor Sill.**For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works. Type of refrigeration system : Flake ice generator with Complete System (Total Qty: 2nos) One per Chamber , Type of Cooling: DX Type Capacity of Refrigeration system [KW] :64 kW per Chamber ,Type of Refrigerant: R404a , Type of compressor: Reciprocating /Screw typeSemi Hermetic Compressor with Suitable Canopy for Condensing Unit,Type of Condenser: Water Cooled : Shell & tube/ Evaporative ,Flake Ice Thickness: 1.5mm to 2mm , Flake Ice Generator with SS MOC Cooling Surface & Complete package with Control Panel.
382	Installation & Comissioning of Flake Ice Room :
383	SUPPLYING OF PRESONAL LOCKERS:for Fish Processing hall & Men & Women dress Changing room as per the follwing details and technical specifications: For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works. Manufactured by prime quality CRCA "cold rolled close annealed" Steel sheetsBody and drawers made from 22 gauge steel sheets (0.8mm)Locking facility available with a duplicate keyCard holder provided at the doorAir- vent opening provided at the doorTotal 15 numbers of individual lockers The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all GST taxes, Insurance, transpotaion charges, labour and handlingcharges etc **For Deatiled Specifications Please Reffer Technicall Document Refrigeration Works.
384	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
385	Supply of SS Work tablein to be used inFood Processing industry, As a part of the project, we need SS working Tables (hygienic design) . For manual grading and sorting, Processing of Fish’s prior to further processing. The design of S.S tables should be with water Pipe & 6 taps, drainage connection pipe / Broder for washing/draining and border with S.S Foot Stand for standing.
386	60 KLD CAPACITY EFFLUENT TREATMENT PLANT & 10 KLD SEWAGE TREATMENT PLANT
387	Planning, Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 60 KLD Effluent Treatment Plant (ETP) including coarse screen chamber, collection sump with ozanisation facility, pumpingmachinery, DAF, Anoxic tank, areation tank (MBBR), sludge settling tank, clear water tank, pressure sand filter, activated carbon filter, treated water tank (20KL capaity), sludge drying bed, or any other structure / component required for smooth andefficient functioning / performance of the plant, etc. The job includes all civil, electro mechanical and instrumentation works required for the ETP for its functioning and smooth operation. The ETP shall be designed for the parameters and design asmentioned in the technical specifcations.
388	Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 10 KLD Sewage Treatment Plant (STP) skid mounted type in MSEP ( mild steel with expoxy painted) construction. The outlet of the treatment plant shall confirm KSPCB and CPCB norms as per guidelines.

Also Visit

Tenders

Kerala Tenders

Distribution and Conditioning Tenders

Refregeration Tenders

Chilling Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Design, Construction, Supply, Installation , Trial Run And Commissioning Of Raw And Finished Material Chilling Plant Of 2X 10 Mtpd, Flake Ice Facility Of 2X10mtpd, Fish Processing Hall With Balance Civil Works , Elec, Mech, Refrigeration& Fire Protectionw, Ernakulam-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Design, Construction, Supply, Installation , Trial Run And Commissioning Of Raw And Finished Material Chilling Plant Of 2X 10 Mtpd, Flake Ice Facility Of 2X10mtpd, Fish Processing Hall With Balance Civil Works , Elec, Mech, Refrigeration& Fire Protectionw, Ernakulam-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us