Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #45504146

Tender For Supply Of Consumables And Non-Consumables For The Department Of Orthopaedics

Issued by Boards / Undertakings / PSU · Pondicherry, Puducherry
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2024
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pondicherry → Puducherry
EMD Exemption
Available
Quantity
Not Available

Project Description

Supply Of Consumables And Non-Consumables For The Department Of Orthopaedics , I - Ring Fixation System - The Raw Material Used For Implants Shoud Be Ss 316-L Conforming To Astm F 138-97 Or Iso-5832-1 Certificateconfirming To This From Raw Material Supplier At Billet Level Should Be Submitted. , Half Rings - Dia : 100Mm. , Half Rings - Dia : 120Mm. , Half Rings - Dia : 130Mm. , Half Rings - Dia : 140Mm. , Half Rings - Dia : 150Mm. , Half Rings - Dia : 160Mm. , 5/8 Ring - 160Mm , Threaded Rods , Size : 80 Mm , Size : 100Mm , Size : 120 Mm , Size : 150 Mm , Size : 200 Mm , Size : 250 Mm , Size : 300 Mm , Threaded Rods : Slotted , Size : 60 Mm , Graduated Telescopic Rods - Size 150Mm , Post- Male/Female , Male Size : 3 Holes , Female Size : 3 Holes , Hinges Male Standard , Hinges Male Low Profile. , Hinges Female Standard , Hinges Female Low Profile , Hinges-90 Degree Standard , Hinges-90 Degree Low Profile , Long Connection Plates , Size : 8 Holes, 155 Mm , Connected Plates With Threaded Ends , Size : 7 Holes, Length 175 Mm , Short Conn.Plate 2 Holes Length 35Mm , Short Conn.Plate 3 Holes Length 45Mm , Twisted Plates - Size:3 Holes Length 65Mm , Twisted Plates - Size: 2 Holes Plates , Bayonet Point-Cortical 1.8Mm X 370Mm , Wire Fixation Buckle , Wire Fixation Bolt Cannulated , Wire Fixation Bolt Slotted , Bolt, 6 Size : 10 Mm , Bolt, 6 Size : 16 Mm , Bolt, 6 Size : 30 Mm , Slotted Washers 4.0Mm , Spacing Washers 2.0Mm , Flat Sided Washers 2.0Mm , Flat Sided Washers 4.0Mm , Nut 6Mm , Nylon Insert Nut , Square Nut , Threaded Socket,Size : 20 Mm , Threaded Socket, Size : 30 Mm , Threaded Socket, Size : 40 Mm , Blocks For Half Pins , Size : 1 Holes , Size : 2 Holes , Size : 3 Holes , Size : 4 Holes , Sleeves 6Mm , Set Screws , 90 Deg. Arch,Large Size , 120 Deg.Arch,Large Size , Oblique Support , Olive Wire With Stopper Made Out Of Single Piece , Composite Foot Rings With Carbon Reinforcement Short Arm , Composite Foot Rings With Carbon Reinforcement Long Arm , Ii - The Rail Fixation System: Adult (The Raw Material Used For Implants Shoud Be Ss 316-L Conforming To Astm F 138-97 Or Iso-5832-1 Certificateconfirming To This From Raw Material Supplier At Billet Level Should Be Submitted.) (Instruments) , Trocar , Drill Bits 3.2X200mm , Drill Bits 4.8X200mm , Templates , Forendclampandcentralclamp , Forswivel Clamp , Drill Guides 6X3.2X40 , Drill Guides 6X3.2X80 , Drill Guides 6X5x40 , Drill Guides 6X5x80:8 Nos. , Drill Guides 5X2x43mm , Drill Guides 5X2x83mm , Screw Guide 8X6x60mm , Screw Guide 8X6x100mm , Allenkey 6Mm , Appliances: , Rail - 240Mm Long , Rail - 300Mm Long , Rail - 400Mm Long , Cd Unit , 40 Mm , 80 Mm , Implants - Tapered Pin 6Mm To 5Mm , Length 130Mm Thread Length30mm , Length130mmthreadlength40mm , Length130mmthreadlength50mm , Length150mmthreadlength30mm , Length150mmthreadlength40mm , Length150mmthreadlength50mm , Length170mmthreadlength40mm , Length170mmthreadlength50mm , Length170mmthreadlength60mm , Length200mmthreadlength40mm , Length200mmthreadlength50mm , Length200mmthreadlength60mm , Tapered 6Mm To 5Mm-With Hydroxyapetite Coating For Threads , Length130mmthreadlength30mm , Length130mmthreadlength40mm , Length130mmthreadlength50mm , Length150mmthreadlength30mm , Length150mmthreadlength40mm , Length150mmthreadlength50mm , Length170mmthreadlength40mm , Length170mmthreadlength50mm , Length170mmthreadlength60mm , Length200mmthreadlength40mm , Length200mmthreadlength50mm , Length200mmthreadlength60mm , Container , Container For Rail Fixator System For Appliances , Container For Rail Fixator System For Instruments , Container For Rail Fixator System For Implants , The Rail Fixation System: Pediatric - Appliances , Cd Unit-Pediatric , Rail-Pediatric , 150Mm , 200Mm , 250Mm , Central Clamp-Pediatric , End Clamp-Pediatric , Swivel Clamp-Pediatric , T Clamp Pediatric , Implants:Tapered 4.5Mm To 3.5Mm , Length100mmthreadlength20mm , Length100mmthreadlength30mm , Length120mmthreadlength30mm , Length120mmthreadlength40mm , Tapered4.5Mmto3.5Mm-Withhydroxyapetitecoatingforthreads , Length100mmthreadlength20mm , Length100mmthreadlength30mm , Length120mmthreadlength30mm , Length120mmthreadlength40mm , Instruments: , Screwguide;8X6x60mm8nos , Drillguide-6X3.2X40mm-8Nos , Drillbit3.2X200mm , Halfpinintroducerdtype , Allenkey - 5Mm , Templates For Pediatric End And Central Clamp , Template For Pediatric Swivel Clamp , Container For Pediatric Rail Fixator System Appliances , Container For Pediatric Rail Fixator System Instruments , Container For Pediatric Rail Fixator System Implants , Iii - Consumables -Arthroplasty , Hip Prosthesis-Femoral – Uncemented – Bipolar - Fixed (Fenestrated) Sterile Packing; Sizes : Between 35Mm And 53Mm (Unused Sizes Will Be Exchanged For Used-Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Cemented – Bipolar- Fixed(Non-Fenestrated) Sterile Packing; Sizes : Between35mm And 53Mm(Unused Sizes Will Be Exchanged For Used-Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Cemented – Bipolar – Modular (Mueller Type)Each Unit Consists One Number Of Variable Sizes Of 1. Cemented Femoral Stem 2. Bone Cement ( Antibiotic Cement 40 Gms) 3. Bipolar Cup (Shell And Uhmwpe Insert) 4. Femoral Head (Unused Sizes Will Be Exchanged For Used Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Uncemented – Bipolar – Modular (Mueller Type)Each Unit Consists One Number Of Variable Sizes Of 1. Uncemented Stem 2. Bipolar Cup ((Shell And Uhmwpe Insert) 3. Femoral Head ( Unused Sizes Will Be Exchanged For Used Up Sizes During The Course Of The Year At No Further Costs) , Hip Prosthesis- Femoral – Uncemented – Revision- Modular Femoral Stem With Separate Distal And Proximal Sizing – Consisting Of Separate Coated Metaphyseal Sleeve Of Various Sizes, Standard And Lateral Neck Components Of Varying Lengths And Offset And Uncemented Stem Of Varying Length Each Unit Consists Ofone Number Of Variable Sizes Of 1. Uncemented Modular Femoral Stem 2. Uncemented Modular Metaphyseal Stem 3. Neck Component 4. Femoral Head 5. Uncemented Porous Coated Cup. 6.Acetabular Cup Liner Uhmwpe 7. Cancellous Bone Screws 6.5Mm ( 2 Nos – 20Mm,25Mm )(Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3 Years ) , Hip Prosthesis- Total – Cemented Each Unit Consists One Number Of Variable Sizes Of 1.Cemented Femoral Stem (Triple Taper Type) 2.Cemented Uhmwpe Flanged Cup. 3. Femoral Head – Diameter 28Mm/ 32Mm/ 36 Mm With Adjustable Neck Length 4. Cement Restrictor 5. Canal Centraliser 6. Antibiotic Bone Cement (2 Packets Of 40G Each) (Shelf Life Of All Items, Prior To Expiry Date Must Be At Least 3-5 Years) , Hip Prosthesis- Total – Uncemented Each Unit Consistsofone Number Of Variable Sizes Of 1.Uncemented Femoral Stem- Ha Coated 2.Uncemented Porous Coated Cup. 3.Acetabular Cup Liner Uhmwpe 4. Femoral Head – Diameter 28Mm / 32Mm/ , 36 Mm / With Adjustable Neck Lengths 5.Cancellous Bone Screws 6.5Mm ( 2 Nos – 20Mm,25Mm )(Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years ) , Knee Prosthesis- Total – Cemented Each Unit Consists One Of Number Of Variable Sizes Of 1. Femoral Component (Cocr) Right/Left 2. Tibial Tray Keeled(Cocr) 3. Uhmwpe Tibial Insert 4. Uhmwpe Patella Component Fixed 5. 2 Packets Of Antibiotic Cement 20 Gms Each (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years) , Megaprosthesis Distal Femur Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Right 2. Proximal Tibia Component 3. Resection Piece 4. Intramedullary Stem 5. Antibiotic Bone Cement 40Gm - 02 Nos , Megaprosthesis Distal Femur Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Left 2. Proximal Tibia Component 3. Resection Piece 4. Intramedullary Stem 5. Antibiotic Bone Cement 40Gm - 02 Nos , Megaprosthesis Proximal Femur - Each Unit Consists Of One Number Of Variable Sizes Of 1. Modular Bipolar Cup 2. Modular Head Trochanteric Component.Right 3. Resection Piece. 4. Intramedullary Stem Piece 5. Antibiotic Bone Cement 40Gm - 01Nos. , Megaprosthesis Proximal Femur - Each Unit Consists Of One Number Of Variable Sizes Of 1. Modular Bipolar Cup 2. Modular Head Trochanteric Component.Left 3. Resection Piece. 4. Intramedullary Stem Piece 5. Antibiotic Bone Cement 40Gm - 01Nos. , Megaprosthesis Proximal Humerus- Each Unit Consists Of One Number Of Variable Sizes Of 1.Proximal Humerus Component Right/Left 2.Resection Piece. 3. Humeral Intramedullary Stem 4. Antibioticcement 20Gm - 02Nos , Megaprosthesis Proximal Tibia -Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Right 2.Proximal Tibia Component 3.Resection Piece 4.Intramedullary Stem 5. Antibioticcement 40Gm - 02 Nos , Megaprosthesis Proximal Tibia -Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Left 2.Proximal Tibia Component 3.Resection Piece 4.Intramedullary Stem 5. Antibioticcement 40Gm - 02 Nos , Megaprosthesis Total Femureach Unit Consists Of One Number Of Variable Sizes Of 1. Proximal Femur Head Component Comprising Of Modular Bipolar Cup 2.Modular Head, Trochanteric Component Left/Right/Neutral. 3. Resection Coupler 4. Resection Piece 5.Distal Femur Component 6.Proximal Tibia Component 7. Antibioticcement 40Gm 03 Nos. , Shoulder Prosthesis – Humeral - Modularconsisting Of Cemented Humeral Stems Of Various Sizes With Humeral Head (Various Options) With The Option Of Combining Different Humeral Stems With Humeral Head Separatelyeach Unit Consists Of One Number Of Variable Sizes Of 1. Cemented Modular Humeral Component 2Humeral Head 3. One Packets Of Antibiotic Cement 20 Gms (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3 Years ) , Elbow Prosthesis – Total–Cemented- Modular Cemented Prosthesis With Various Humeral Lengths And Sizes With Anatomical Ulnar Stems Of Varying Sizes Each Unit Consistsof One Number Of Variable Sizes Of 1. Cemented Modular Distal Humeral Component 2. Cemented Ulnar Component Right/Left 3. Two Packets Of Antibiotic Cement 20 Gms Each (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years ) , Radial Head Prosthesis – Cemented (Implant With Straight And Curved Stems, Head (Of Varying Head Diameter And Height) , Dual Mobility Uncemented Total Hip Replacement Consists Of 1.Ha Coated Femoral Stem 2.Acetabulat Shell 3.Linear Cup Polyethyelene 4.Co-Cr Head , Revision Acetabular Cup - Uncemented 1.Porous Coated-2 Nos. 2.Cup Cage Construction-1 No. 3.Triflange- 1 No. , Antibiotic Bone Cement 40G High Viscosity , Antibiotic Bone Cement 40G Low Viscosity, For Use In Cement Gun , Cement Mixing System, Each Unit Consists One Number Of 1. Cement Mixing System (Vacuum Based) 2.Femoral Break Way Nozzle 3. Pressuriser.The Sample Must Be Compatible With The (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years) , Iv - Consumables - Spine , Spine Biopsy Kit Tissue Bipsy Device Provided With Ergonomic Handle. The Needle Should Be Equipped With A Cannula Made Of Aisi 304 Stainless Tempered Steel In Accordance With International Standards The Needle Should Have Centimeter Markings On The Cannula Surface, Allow To Easily Determine The Depth Of Insertion Into The Bone Tissue. Should Have Special Sharpening At “Fish Mouth” Of The Needle Tip. The Sample Architecture. Needle Should Improve The Penetration Capacity Establishing A Perfect Cylindrical Cutting That Maintains Intact The Set Shouldinclude: -Extraction Wire To Insert Into The Cannula Tip - Luer-Lock Cap (On The Handle) To Avoid The Blood Loss During The Extraction Step. Needle Should Be Equipped With A Stylet With Trocar Pyramidal Tip To Allow A Quick And Less Invasive Penetration Into The Cortical. , Demineralised Bone Matrix 2.5Cc , Demineralised Bone Matrix 5 Cc , Bone Substitutes This Should Be An Rhbmp-2 (Recombinant Human Bone Morphogenetic Protein-2) Formulation Combined With A Bovine-Derived Absorbable Collagen Sponge (Acs) Carrier. Should Be Fda & Dgci Approved , Olif/ Xlif Cage , Stand Alone Olif / Dlif Cage Assembly - Cage Plug Screws , Expandable Cages / Interbody Spacers For Use In Dorsal And Lumbar Spine Made Of Titanium.Should Have Usfda & Dgci Approval. Instrumentation Should Be Provided At The Time Of Surgery. (Assorted Sizes). , Interbody Cages Made Of Trabecular Metal Material For Use In Lumbar Spine Fusion. Instrumentation Should Be Provided At The Time Of Surgery. (Assorted Sizes). , Lumbar Interbody Peek Cage: Interbody Implant For Use Inlumbar Interbody Fusion. (Assorted Sizes). , Lumbar Interbody Titanium Cage : Interbody Implant For Use In Transforaminal Lumbar Interbody Fusion (Tlif) Procedures (Assorted Sizes). , Extended Tandem Connectors For 4.5 Rod System For Paediatric Deformity To Facilitate Intra-Operative Compression And / Or Distraction Maneuvers , Spinal Rod To Rod Connectors Compatable With 5.5 Mm Titanium Rods , Domino Rod To Rod Connector (Open Type) Compatable With 5.5 Mm Rod , Domino Rod To Rod Connector (Closed Type) Compatable With 5.5 Mm Rod , Transverse Connector Assembly / Cross-Links Assembly For Lumbar Spine Compatible With 5.5 Mm Rods (Titanium) Us Fda & Dgci Approved. Instrumentaion Should Be Provided At The Time Of Surgery. , Paediatric Spine Hooks (Compatible With 4.5Mm Rods) Assorted Types( Supralaminar, Infralaminar, Pedicle And Transverse Process Hooks) , Adult Spine Hooks (Compatible With 5.5 Mm Rods) Assorted Types( Supralaminar, Infralaminar, Pedicle And Transverse Process Hooks) , Kyphoplasty Kit - With 1 Baloon And Kyphoplasty Cement , Titanium Mesh Cage(Harms Type Cage) Assorted Sizes , 5.5 Mmrod For Mis Surgery Rods Should Reduces Trauma To Patient Avoidingadditional Incisions For Rod Insertion , 5.5 Mm Rods For Spine Fixation (Titanium), 400Mm , 5.5 Mm Rods For Spine Fixation (Cobalt Chrome),400Mm , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4 X 20 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4 X 25 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 20 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 25 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 30 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Mis Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , S2 Alar Iliac Screws Titanium Compatable With 5.5 Mm Rods. Assorted Sizes. , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 5.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.0 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.5 X 45 Mm Screw With Set Screw , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 50 Mm Screw With Set Screw. , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 5.5 X 40 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 5.5 X 45 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 6.5 X 40 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 6.5 X 45 Mm With Set Screw , Titanium Pedicle Screws - Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 50 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 25 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw And Cement Introducer Assemby , Vertebral Body Augmentation Kit Kit Should Contain Vertebral Body Augmentation Cement This Should Allows For An 8-10 Minute Working Time At 68F/20C, And Enable A Controlled Introduction Of Cement. Kit Should Consists Of A Needle And A Stylet For Bone Access. The Needle Also Acts As A Cannula Through Which The Cement Is Introduced Into The Vertebra Kit Should Consist Of 15 Gauge Biopsy Needle Consists Of A Needle And Stylet Intended For Use Through An 11 Gauge Or 13 Gauge Introducer Needle. , Low Viscosity Vertebropasty Cement 20G , Pre-Bent Sub-Laminar Wire , V - Consumables -Arthroscopy , Disposable Arthroscopic Diathermy Cable With Tip Compatible With Stryker Diathermy Console 90 Degree , Titanium Suture Disc , Adjustable Loop 4Mm X 12Mm , Biocomposite Interference Screws Of Various Lenght Sizes From 23Mm To 35Mm With Dia From 7Mm To 11Mm.Two Sets Of Instrumentation Should Be Provided On Loaner Basis. , Knotless Ligament Anchor (2.6/3.5Mm) [Peek] , Fibre Loop Size 2 -0 With Straight Needle , Titanium Interference Screw Sizes From 7 To 10Mm Of Various Lengths From 23 To 35Mm With Screw Drivers. One Set Of Instrumentation Should Be Provided On Loaner Basis. , Peer Interference Screw Of Various Lenght Sizes From 23Mm To 35Mm With Dia From 6Mm To 7Mm.One Set Of Instrumentation Should Be Provided On Loaner Basis. , Fibre Wire 2-0 Size With Needle (Curved) , Titanium Anchors With High Tension Suture Material 2.8Mm/3Mm , 5Mm Suture Anchor Titanium , All Suture Anchors (1.5/1.8Mm) , A Sterile, Disposable At Least 20Cm Length Flexible Needles In Pairs Looped Together With 2-0 Ultra High Molecular Weight Polyethylene Suture For Inside Out Repair Of Meniscus , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Strainght) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Right Curved) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Left Curved) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Reverse Curved) , Fixation Button With Loop For Acromio Clavicular Joint Stabilization , Vi - Consumables -Paediatric Implants , Pediatric Dhs With Lag Screw And Cortical Screw Assembly - 135 Degree(Short & Long Barrel) With 3.5 Mm Screws, 3 To 7 Holes , Titanium /Stainless Steel Telescopic Intramedullary Nail Consists Of Male & Female; Size : 2 - 6Mm Diameter, Length : 20 - 40Mm , Cannulated Paediatric Osteotomy Blade Plate - Child Hip Plate 3.5Mm, Angulation 90° With Blade Length 26, 32, 38Mm And Displacement 4Mm, 8Mm , Cannulated Paediatric Osteotomy Blade Plate -Child Hip Plate 4.5Mm, Angulation 80°, 90°, 100° With Blade Length 35, 45Mm And Displacement 4 & 8Mm , Cannulated Paediatric Osteotomy Blade Plate -Infant Hip Plate 3.5Mm, Angulation 90° With Blade Length 25, 32Mm And Displacement 7Mm , Cannulated Paediatric Osteotomy Blade Plate - Adolescent Hip Plate 4.5Mm,Angulation 90°, 95°, Condylar Plate - 5, 7, 9 Holes With Blade Length 40, 50, 60, 70Mm. , Medial High Tibia Plate Compatible With Proximal Tibia Osteotomy System , Proximal Tibia Osteotomy System;One Each Of - Osteotomy Chisels, Bone Spreader, Gap Measuring Device , 3.5Mm Epiphyseal 8 Shaped Plate , Lcp Pediatric Hip Plates With Screws (Size-20-110Mm) Assembly 3.5 & 5Mm, 3 To 9 Holed, Angles 90 To 130 Degrees. Provision For Exchange Of Used Implants Should Be Made. , Proximal Femoral Paediatric Lcp Plate System With Screws , Adolescent Nailing System With Nails And Bolts For The Paediatric Shaft Of Femur Fracture Size 8-10Mm Diameter And Length(240-400Mm) , Distal Femoral Osteotomy System With Medial Osteotomy Tomo Fix Plates , Enders Nailing System With Nails For Femoral And Tibial Shaft Fracture Size 2- 5Mm In Diameter And Length 240Mm- 400Mm , 2.4 Distal Radius Variable Angle Styloid Plate 4-8Holes Titanium 1 Unit Consists Of 1 Plate And Locking Screws For Available Holes , Vii - Consumables - Trauma Anatomical Locking Plates (Titanium): Costing Has To Be Given Per Unit I.E.Plate Plus Screws. For Example, In A 4 Holed Plate Includes 2 Cancellous Screws And 4 Diaphyseal Screws. Screws To Be Provided At The Time Of Surgery. Screw Sizes Will Be Determined During Surgery. Instrumentation To Be Provided On Loaner Basis , 3.5 Distal Radial Locking Plate Right And Left 4 To 12 Holes (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5 Lateral Distal Humerous Locking Plate Right And Left ( 4,6,8,10,12Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5 Medial Distal Humerous Locking Plate Right And Left (4,6,8,10,12Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5Mm Lateral Distal Tibial Locking Plate Right & Left ( 6, 8, 10, 12,14,16,18 Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5Mm Medial Distal Tibial Locking Plate Right & Left ( 6, 8, 10, 12 ,14,16,18 Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Calcaneal Locking Plate Right & Left ( Anatomical) 3.5 Mm (Titanium) 1 Unit Consists Of 1 Plate And 8 Locking Screws. , Distal Femoral Locking Plate And Screws (Titanium) - Right & Left (4 Holes To 12 Holes) 1 Unit Consists Of I) Plate-1 No.,(Left Or Right) Ii) 6.5/7 Mm Locking Screws- At Least 5 Nos. For Plate Head, Iii) 4.5/5 Mm Locking Cortical Screws - At Least 5 Nos. For Plate Shaft Iv) Plate Head Should Have Atleast Five Locking Screw Holesand V) Shaft Should Have Combi Holes . Aiming Block Should Be Provided Along With Appropriate Instrumentation , Lcp- Posterior Medial Proximal Tibial Plates 3.5 (Rt And Lt) , Titanium , 2,4,6,Holes(Quote For Entire Assemblywith Screws) , Lcp Proximal Lateral Tibia Plates 4.5/5 (Rt And Lt), 5,7,9,11,13 Holes(Quote For Entireassemblywith Screws) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Medial Distal Femur Locking Plates 3 To 9 Holed.(Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Proximal Femoral Locking Plate And Screws (Titanium) - Right & Left (4 Holes To 12 Holes) 1 Unit Consists Of I) Plate-1 No., (Left Or Right) Ii) 6.5/7 Mm & 4.5/5 Mm Locking Screws - 5 Nos. For Plate Head, Iii) 4.5/5 Mm Locking Cortical Screws - At Least 5 Nos. For Plate Shaft Iv) Plate Head Should Have Atleast Five Locking Screw Holes And V) Shaft Should Have Combi Holes. Aiming Block Should Be Provided Along With Appropriate Instrumentation , Proximal Humerous Locking Plate (Titanium) Right & Left From 4 Holes To 10 Holes 1 Unit Consists Of I) Plate-1 No., Ii) 3.5/4 Mm Locking Screws- 6 Nos. For Plate Head, Iii) 3.5/4 Mm Cortical/Locking Screws - 4 Nos. For Plate Shaft Iv) Plate Head Should Have At Least Six Locking Screw Holes And V) Shaft Should Have Combi Holes. Aiming Block Should Be Provided Along With Appropriate Instrumentation , Proximal Medial Locking Tibial Plate (Titanium) Right & Left ( 4,6,8,10 Holes) 1 Unit Consists Of I) Plate-1 No., Ii) 3.5/4 Mm Locking Screws-3 Nos. For Plate Head, Iii) 3.5/4 Mm Cortical/Locking Screws -4Nos. For Plate Shaft Iv) Plate Head Should Have At Least Three Locking Screw Holes And V) Shaft Should Have Combi Holes . , Viii - Consumables - Screws , 6.5/7 Mm Partially Threaded/Fully Threaded Cannulated Cancellous Screws I) Should Be Made Of Surgical Grade Titanium Ii) Screws Should Be Supplied With Equal Number Of Compatible Washers. Iii) The Complete Set Of Necessary Instruments Required For Screw Insertion (Including Compatible Threaded Guide Wires (10 No’S) Should Be Supplied On Loaner Basis Iv) Sizes Required In Increments Of 5 Mm: 75 Mm To 95 Mm - 10 Each (50), 100 Mm To 120 Mm - 15 Each (75), 125Mm To 135 Mm - 5 Each (15) , Screws, 7Mm Cannulated Cancellous, 16Mm Threaded, Sizes 40Mm To 85Mm , Screws, 7Mm Cannulated Cancellous, 16Mm Threaded, Sizes 110 Mm To 140Mm , Screws, 7Mm Cannulated Cancellous, 32 Mm Threaded, Sizes 60Mm To 75Mm , Screws, 7Mm Cannulated Cancellous, Fully Threaded, Sizes 30Mm To 120Mm , Screws Cortical Self Taping , 1.5 Mm ,Sizes 10Mm To 20Mm , Screws Cortical Self Taping , 2Mm , Sizes 10Mm To 20Mm , Screws, 3.5Mm Cortical Self Taping Sizes 12Mm To 120Mm , Screws, 2.4 Mm Headless Compression, Sizes 12Mm To 30Mm (Titanium) Instrumentation Should Be Provided On Loaner Basis , Washer For Cannulated Cancellous Screws For 6.5Mm And 4Mm , Herbert Screws 4.5- 5.5Mm Sizes (30-70Mm) , Ix - Consumables - Plates , Lcp Dhs Plate Titanium The Implants Should Be Available With Long Barrel (38Mm) And Short Barrel Length Of (25Mm). The Dhs Barrel Plate Should Be Available In The Following Ccd Angles: 130°, 135°, 140° 145°And 150° The Dhs Barrel Plate Should Be Available In 4-6 Holes 12.5 Mm Dhs Blade/Screw Is Required In 65-120 Mm Increments 1 Unit Consists Of I) Dhs Blade/Screw - 1 Nos Ii) Dhs Plate - 1 Nos Iii) 5.0 Mm Locking Screw- 2 Nos, 4.5 Mm Cortex Screw- 2 Nos , 2.7/3.5 Mm Distal Anteromedial Tibia Lcp (Titanium ) 4- 10 Holes. Plate Head Should Have At Laest 8 Locking Holes.1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Variable Angle Lcp Condylar Plate For Distal Femur(Plate With Screw) (All Sizes Both Sides) Titanium 6- 18Holes, Lcp Combi-Holes In The Shaft. 1 Unit Consists Of I) Plate - 1, Ii) 5.0 Mm Variable Angle Cannulated Locking Screws -.5 Nos, 5.0 Mm Variable Angle Locking Screws -.4 Nos, The Va Periprosthetic Locking Screws 5.0 Mm-3 Nos,4.5 Cortex Screw-4 Nos. The System Should Have Aiming Arm For Variable Angle-Lcp Condylar Plate 4.5/5.0 For Mipo Technique. Conical Threaded Drill Sleeve To Angulate The Drill Bits In 15- 30 Degrees, Torque Limiting Screw Driver, Aiming Device For Mipo Should Be Providedon Loaner Basis , Variable Angle Lcp Tibial Plate For Proximal Tibia (Plate With Screw) (All Sizes Both Sides) Titanium 4 - 14 Holes Lcp Combi-Holes In The Shaft. 1 Unit Consists Of I) Plate -1, Ii) 3.5 Mm Variable Angle Locking Screws -.7 Nos,3.5 Cortex Screw-3 Nos. The System Should Have Aiming Arm For Variable Angle-Lcp Proximal Lateral Tibial Plate 3.5 Mm For Mipo Technique. Conical Threaded Drill Sleeve To Angulate The Drill Bits In 15 Degrees, Torque Limiting Screw Driver, Aiming Device For Mipo Should Be Provided On Loaner Basis , Dhs Trochanteric Stabilisation Plate Used To Stabilize The Greater Trochanter And Lateral Wall And It Is Used As A Modular Extension Of The Dynamic Hip Screw System. Should Be Compatible With All Standard Dhs , 2.4 Mm Distal Radius Variable Angle Volar Locking Plate Titaniumunit: 1 Unit Consists Of Plate-1 No., 2.4 Mm Variable Angle Locking Screws-4 Nos. For Plate Head, 2.4 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Eight Locking Screw Holes And Shaft Should Have Combi Holes (3Holes-12Holes) , 2.4/2.7/3.5 Mm Proximal Ulna Locking Plate Titanium I) Unit: 1 Unit Consists Of Plate-1 No., 2.4/2.7 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Four Locking Screw Holes And Shaft Should Have Combi Holes. Required Sizes (3H-5No, 4H-5No, 5H-2 No) , 2.4/3.5 Mm Lateral End Clavicle Locking Plate (Titanium) Right And Left Unit: 1 Unit Consists Of Plate- 1 No., 2.4 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Five Locking Screw Holes And Shaft Should Have Combi Holes , 2.7Mm Calcaneallocking Plate (Titanium) - Right And Left 1 Unit Consists Of 1 Plate , 8 Locking Screws , 3.5 Mm Lateral Proximal Tibial Locking Lcp Titanium I) Unit: 1 Unit Consists Of Plate-1 No.,3.5/4 Mm Locking Screws- 5 Nos. For Plate Head, 3.5/4 Mm Locking Cortical Screws - 4 Nos. For Plate Shaftiii) Plate Head Should Have Atleast Five Locking Screw Holesand Shaft Should Have Combi Holes Iii) Supplier Should Supply The Complete Set Of Instruments Including Drill Bit, Tap, Depth Gauge, Threaded Drill Sleeve, Screw Driver, Aiming Device/Guiding Block On Loaner Basis Till Stocks Last Iv) Inventory With All Screw Sizes Should Be Maintained In Jipmer V) Supplier Should Be Ready To Exchange Unused Plates For Required Sizes Left:3H-8No, 4H-10No, 6H-12No, 8H-5No,10H-5No Right: 3H-8No, 4H-10No, 6H-12No, 8H-5No, 10H-5No , 3.5 Mm Precontouredacetabular Reconstruction Plate 6 To 20Holes (Right And Left) With Screws , 3.5 T Buttress Plate 3 To 4 Holes , 3.5 T Oblique Plate Right & Left 3 To 10 Holes , Distal Humerus Extra Articular Anatomical Locking Plate& Screw Assemblytitanium(I) Unit: 1 Unit Consists Of Plate-1 No., 3.5 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft (Ii) Plate Head Should Be Anatomical To Posterior Contour Of Lateral Condyle, Atleast Five Locking Screw Holes And Shaft Should Have Combi Holes (Iii) Supplier Should Supply The Complete Set Of Instruments Including Drill Bit, Tap, Depth Gauge, Threaded Drill Sleeve, Screw Driver, Aiming Device/Guiding Block On Loaner Basis Till Stocks Last (Iv) Distal Humerus Extra Articular Anatomical Locking Plate Left: (4H - 5No, 5H - 5No, 6H- 5No, Right: 4H - 5No, 5H - 5No, 6H- 5No) , Locking Plate With Screw Construct For Fixation Of High Tibial Osteotomy (Titanium)- Head Should Have At Least 3 Holes (All Sizes) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Mini Fragment Plates 3 To 5 Holes With Screws, With Screw Driver , Drill Bit , Plate, 3.5Mm Pubic Symphysis 4 To 6 Holes With Screws , Plate, 4.5 Dcp, 6 To 12 Holes , Plate, Low Profile Reconstruction Straight Plate 3.5Mm For Acetabulum 6 To 20 Holes With Screws , 3.5Mm Quadrilateral Plate System For Acetabular Fracture , 3.5Mm Intrapelvic Acetabular System With Plate And Screws , Proximal Radius Locking Plate With Screw Construct For Radical Head (2.4Mm) , Proximal Radius Locking Plate With Screw Construct For Radical Neck (2.4/2.7Mm) Titanium1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Spring Plates 3.5Mm 3 To 4 Holes With Screws , Pfn With Helical Blade (Titanium) 1. Range : Proximal Femoral Nails From 9 Mm Dia To 12 Mm Dia Length 170 Mm To 340 Mm 2. Units: Each Proximal Femoral Nail Unit Consist Of (I) Proximal Femoral Nail - 1 No ( 9 Mm Dia To 12Mm Dia Length 170 Mm To 340 Mm) (Ii) Pfn Blade - 1 No.( 75Mm - 120Mm ) (Iii) 4.9 Mm Locking Bolt X 2 , Titanium Mount Block For Wire / Cable.Should Be Compatible With 4.5Mm Locking Plates. Should Have 5Mm Threads , Fumeral Neck System - 1 Unit Consisting Of Bolt (10Mm), Anti-Rotation Screw (6.4Mm), Locking Screw (5Mm), 130 Degree One Holed Plate With Instrumentation On Lonar Basis , Perimeter Calcaneal Locking Plate Right & Left ( Anatomical) 3.5 Mm Or 2.7 Mm (Titanium) 1 Unit Consists Of 1 Plate And 8 Locking Screws. , X - Consumables - Nails , Titanium Elastic Nail, 2.5 X 44 , Titanium Elastic Nail, 3 X 44 , Titanium Elastic Nail, 3.5 X 44 , Titanium Elastic Nail, 4 X 44 , Titanium Elastic Nail, 4.5 X 44 , Reconstruction Femoral Nail 1. Should Be Made Of Surgical Grade Stainless Steel Or Titanium 2. Nail Should Be Compatible With Antegrade Piriform Fossa Entry 3. Proximal Nail Should Have Options For Recon Bolts, Descending Trochanteric Bolts And Lateral To Medial Standard Interlocking Bolt (2 Each) 4. Distal Nail Should Atleast Two Locking Holes 5. The Complete Set Of Instrumentation Required For Nail And Locking Bolt Insertion Should Be Supplied On Loaner Basis 6. One Nail Along With All The Requisite Bolts Will Be Considered As One Unit 7. Sizes Required: 9Mm X 38, 40, 42 - 4 Units Each10mm X 38,40,42 - 8 Units Each11mm X 38,40,42 - 8 Units Each , Retrograde Femoral Nail (Left And Right) Titanium . Each Unit Consists Of 1 Nail (Both Short/Long), Spiral Blade/ Screw-1 Nos, 5.0 Mm Locking Screw-3 Nos , Intramedulary Nail, Inter Lockingfemur (Titanium) 1. Range : Femur Interlocking Nails From 9 Mm Dia To 13 Mm Dia Length 32 To 42 Mm 2. Units: Each Linterlocking Nail Unit Consist Of (I)Interlocking Nail - 1 No (Ii) Interlock Bolts X 4 , Tibial Nail For Metaphysial With Diphysial Fractures.(Titanium )Proximal Part Of Nail Should Have 5 Locking Options, 3 Oblique And 2 Medio- Lateral.Distal Part Of Nail Should Have 4 Locking Option In Multiple Directions (Assorted Sizes) 1 Unit Includes 1 Nail With 3 Proximal Screws And 2 Distal Screws , Pfn Nail Long -(Titanium) 1. Range : Proximal Femoral Nails From 9 Mm Dia To 11 Mm Dia Length 300 Mm To 440 Mm 2. Units: Each Proximal Femoral Nail Unit Consist Of (I) Proximal Femoral Nail - 1 No ( 9 Mm Dia To 11 Mm Dia Length 300 Mm To 440 Mm) (Ii) 8 Mm Cannulated Locking Bolt ( 65-110) X 1 6 Mm Cannulated Locking Bolt ( 65-110) X 1 4.9 Mm Locking Bolt X 2 , Intramedulary Nail, Inter Lockingtibia (Titanium) 1. Range : Tibial Interlocking Nails From 7 Mm Dia To 10 Mm Dia Length 28 Mm To 34 Mm 2. Units: Each Tibial Interlocking Nail Unit Consist Of (I) Tibial Interlocking Nail - 1 No (Ii) 3.9 / 4.9 Interlock Bolts X 4 , Tibio Calcaneal (Hindfoot) Fusion Nail: Titanium 1.Range : Nails From 9 Mm Dia To 13 Mm Dia Length 20 Mm To 34 Mm 2. Units: Eachunit Consist Of (I) Tibiocalcaneal Nail - 1 No (9 Mm Dia To 13 Mm Dia Length 20 Mm To 34 Mm) (Ii) 5 Mm And 6Mm Locking Screws X 5Nosalong With One 12.5Mm Spiral Blade(45-100Mm)Corresponding To The Case , Enders Nail System With Nails 2-5Mm In Diameter And Length 240-400Mm , Adolescent Nailing System With Nails And Bolts 8-10Mm In Diameter And Length 240-400Mm , Straight Titanium Proximal Humeral Nail - 1 Unit Consisting Of Nail 1 No., 4.5Mm Blunt Locking Screw With Suture Hole - 3 Nos., 3.5Mm Locking Screw - 2 Nos., 4Mm Locking Screw - 2 Nos. With Instrumentation On Lonar Basis , Xi - Consumables - Miscelleanous , Bone Biopsy Needle Set , Saw Blades 5Mm To 14 Mm Compatible With Conmed , Burr, Round Fluted 6 Mm To 12Mm , Disposable Diathermy Cables -Monopolar Adult , Cement Nozzles With Gun On Lonar Basis , Arthroscopy Drape Set (Sterile) (With Foot Cover, Sterile Drape For Camera Cable And Cling Drape). , Laminectomy Drapes , Sterile Disposable Drapes For 2D C-Arm (Three Pieces) With Poly Strapes - Long Size , Thr Drape Disposable Made Of Material 68-77 Gsm Spun Lace Fabric Water Repellent, Length 200Cm, Width 160Cm, Consists Of Headsheet (1X1.5M), Adhesive Strip (4Cmx1.5M), Two Packets (12X35cm), Two Tube & Cable Holder Workpad (30X50cm), U-Sheet(1.75X1.5M). U- Cut(70X15cm), Straight 24 Cm Round, Two Absorbent Workpad (50X10cms) & Polysheet Lining (1X1.25M) , Transparent Drapes With Adhesive Edges (Size - 65X40cms) Betadine Coated , Wound Dressing Sterileincision Size 15X7.5Cm , Wound Dressing Sterileincision Size 20X10cm , Wound Dressing Sterileincision Size 30X10cm , Wound Dressing Sterile Impervious Silver Impregnatedincision Size 20X 10 Cm , Wound Dressing Sterile Impervious Silver Impregnated Sterile Incision Size 30X10 Cm , Soft Roll Cotton Pad - 7.5 Cms , Soft Roll Cotton Pad - 10 Cms , Soft Roll Cotton Pad - 15 Cms , Corkscrew Electrode Set Spiral Needle 0.6 Mm With Tip Cable 1.5 M With 1.5 Mm Touchproof Male Connector Din42802 Sterile Sets With Each 6 Electrodes Red, Green, Yellow, Blue, Black And White, Eto Sterilised, Packed Individually, Single Use , Sdn Electrode Trigon Gn 20/1500, Stainless Steel 1.5 Mm Touchproof Connector, 1 Electrode Green (Ground), Needle Length 20 Mm, Diameter 0.45 Mm, Cable Length 1500 Mm, Single Use, Eto Sterilised , Sdn Electrodes Trigon 15/2000, Stainless Steel 1.5 Mm Touchproof Connector, Pair Of Electrodes Red/Black, Red/White, Blue/Black, Blue/White, Yellow/Black, Yellow/White, Violet/Black, Violet/White, Grey/Black, Grey/White, Needle Length 15 Mm,Diameter 0.45 Mm, Cable Length 2000 Mm, Single Use, Eto Sterilised , Sdn Electrodes Trigon 20/2000, Stainless Steel 1.5 Mm Touchproof Connector, Pair Of Electrodes Red/Black, Red/White, Blue/Black, Blue/White, Yellow/Black, Yellow/White, Violet/Black, Violet/White, Grey/Black, Grey/White, Needle Length 20 Mm,Diameter 0.45 Mm, Cable Length 2000 Mm, Single Use, Eto Sterilised , Surface Adhesive Electrode With Push-Button, With Gel, Dimensions: 48 X 38 Mm, Delivered Non-Sterile, Single Use Only , Fully Synthetic Beta-Tricalcium Phosphate Fully Resorbable Granules Of Average Particle Size 2Mm - 5Cc , Artificial Dural Graft Non-Biological / Synthetic, Biocompatible, Implantable . Sewable To Normal Dura. Should Be Impervious To Fluid. For Permanent Implant. Should Lead To Minimal Adhesion Formation And Tissue Reaction. Expanded Polytetrafluoroethylene (Eptfe) Preferred. , 10% Povidine Iodine 100Ml Bottles , Pulse Lavage , Tps Oil Lubricant , Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste Of Beta-Tricalcium Phosphate And Calcium Sulphatein 50:50 Ratio And With Zpc In A Kit - 5Cc , Injectable Fullyresorbable Synthetic Bone Graft Substitute Setting Paste Of Beta-Tricalcium Phosphate And Calcium Sulphate In 50:50 Ratio And With Zpcin A Dual Syrige Mixing System - 2.5Cc , Neurosurgery Patties , Synthetic High Purity Implant Grade Calcium Sulphate Pre-Formed Pellets Of Size 3Mm And 4.8Mm - 5Cc , Synthetic Recrystallised Hemihydrate Calcium Sulphate Kitto Prepare Antibiotic Impregnated Resorbable Pellets For Delivery Of Antibiotics Locally - 5Cc , Fiber Glass Synthetic Plaster Cast Kit Consisting Of Soft Cotton Roll, Gloves And Fibrecast 7.5Mm To 12.5 Mm , Disposable Diathermy Patient Platepaed , Disposable Diathermy Patient Plate Adult , Stimulation Probe 85Mm Monopolar, Straight, Ball Tip 1.5 Mm Touchproof Connector, Straight Shaft, Ball Diameter 2.3Mm, Working Length 85Mm, With Neutral Sdn Electrode Black, Cable Length 3000Mm, Single Use, Eto Sterilised , Fully Resorbable Synthetic Bone Graft Substitute Mouldable Putty Of Beta-Tricalcium Phosphate And Calcium Sulphate In 50:50 Ratio With Zpc -10Cc , Rust Remover , Gigly Saw , Disposable Suction Tubes With Suction Tip , Nitinol K Wire Size 1, 1.5, 1.8 & 2Mm , Radiofrequency Ablator Single And Multiple Prongs- 15 In Each (Compatible With Serfas) , Fibrin Sealant/Glue For Use In Ortho-Surgery To Prevent Csf Leak Based On Fibrin Coagulum Formed On Mixing Fibrinogen And Thrombin Components In Easy To Apply Chamber And Nozzle System. Dual Tip Syringe System And Vials With Sterile Water For Reconstitution Should Be Part Of The Package. Total Quantity Should Be At Least 1 Ml After Generation Of Fibrin. Warming And Stirring Device Should Be Made Available In Ot Or On Demand Within 24 Hours. Components, If Derived From Pooled Or Single Donor Human Blood Should Be Free From All Known Pathogens. (Any Agitating Device Required To Mix The Glue Should Be Provided During Use And Kept In Ortho Ot) , Stapler Remover - Stainless Steel - Reusable , Acepto Syringe , Hemostatic Dressing For External Application , 4 Ply Non-Woven Gauze, Size 4X4 Inches, Impregnated With A Natural Inorganic Mineralwithx- Ray Detectable Strip. , Soft Roll For Ctev Clinic 6Inches , Patient Pre-Operative Skin Preparation Solution 10.5 Ml In Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa. , Sterile Surgical Tourniquet ( All In One Exsanguination Sterile Tourniquet) - Sizes 14 - 85Cms (Small, Medium, Large, Extra Large) , Xii - Non Consumable - General Instruments , Lead Apron Normal - Consists Of Frontal Overlap, Velcro Panels, Adjustable Elastic Belt For Reduced Back & Shoulder Stress & Side Slits. , Lead Apron Zero Lead - Consists Of Frontal Overlap, Velcro Panels, Adjustable Elastic Belt For Reduced Back & Shoulder Stress & Side Slits. , A Reusable Suture Cutter Open Ended With 4.2Mm Shaft Diameter Left Opening And Total Length Of 13Cm For Arthroscopic Suture Cutting , A Knot Pusher Closed End With Modified Blue Handle In Order Provide Ergonomic Feel And Distal Edges Should Be Smooth To Avoid Suture Cutting In Rotator Cuff Repair , A Metal Reusable Instrument With 3.4 Mm Shaft Diameter Straight Shaft And Approximately 16Cm In Length For Arthroscopic Suture Retrieval , Arthroscopic Hook Scissors 20 -30 Degree Left , Arthroscopic Hook Scissors 20- 30 Degree Right , Arthroscopic Hook Scissors Straight , Arthroscopic Knee Curettes With Handle: , Curette, Small, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Curette, Medium, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Curette, Large, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Bending Tool , Cannula To Access Posterior Horn , Double Lumen Cannula Curved Left , Double Lumen Cannula Curved Right , Double Lumen Cannula Curved Up Left , Double Lumen Cannula Curved Up Right , Double Lumen Cannula Straight , Metal Mallet With Plastic Head , Length 22.5Cm , Notch Chisel With Handle Curved 15 Degrees Downwards , Working Length More Than 12 Cm , Round Tip,With Markings For Depth Measurement , Osteotome. Thin, Flat Tip, 10Mm Width For Harvesting Bone Patella Tendon Graft , Osteotome. Thin, Flat Tip, 8Mm Width For Harvesting Bone Patella Tendon Graft , Rasp , Narrow, Curved, Working Length More Than 12 Cm , Rasp , Narrow, Straight, Working Length More Than12cm , Reusable Inside Out Meniscal Repair Set , Plate Bender , Ilizarov Wire Cutter , Kwire Cutters , Rod Cutters , Wire Cutter Cum Bender , Metal Bone Biopsy Needle Set - Outer Sleeve Cannulated 5 Mm , Cement Mixing Bowl With Spatula , Centrifuge For Prp And Bma Concentrate, Table Top Automated With Brushless Induction Motor 6000 Rpm, Weight 5 Kg With 24 Tubes Of 15 Ml , Hoke Chisel , Debakey Bull Dog Clamps Vascular Size - 25, 30, 45Mm , Diethrich Debakey Cross Action Bulldog Clamp Angled 50°, Jaw 10Mm And 52Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Angled 50°, Jaw 14Mm And 54Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Straight, Jaw 12Mm And 53Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Straight, Jaw 15Mm And 56Mm Total Length With Standard Pressure Of 80 Grams , Multifunctional A3 Copier/Printer, Duplex, Lan, Radf, Scan To Folder, 20Cpm , Cuff Arm For Tourniquet Compatible With Vbm M/C Size - Adult , Cuff Thigh For Tourniquet Compatible With Vbm M/C Size - Adult , Cuff Tourniquet Compatible With Vbm M/C Size - Paed , Volkman Curette 220 Mm (Size 3 Mm) Oval Cup - Sharp Edged , Volkmans Curettee Backward Angled 2 To 4 , Volkmans Curettee Forward Angled 2 To 4 , Superfine Vessel Dilator 13,5Cm, Straight Flat Handle 9Mm, Tips 4X0,3Mm. Must Have A Highly Polishedarea In The Working Surface To Avoid Interluminal Injury In The Vessel , Elevator Disector Double Ended , Fine Disector Reinfield , Freer Double Ended Dissector, With Sharp And Blunt Ends 190Mm , Killian Double Ended Dissector With Sharp And Blunt Ends 180Mm , Mcdonald Double Ended Dissector, 190Mm , Micro Dissector Flat/Curved , Penfield Dura Dissector, Double Ended, Curved, 290Mm , Penfield Dura Dissector, Double Ended, One Side Wax Packer And One Side Dissector Curved, 190Mm , Tungsten Carbide Metzenbaum-Aquila-Fino Dissect.Sc Curved, Bl/ Round, Tc, Sc, Golden Scres 18Cm , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.18Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.20Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.25Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.28Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Dissec.18Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.20Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.23Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.20Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.23Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.23Cm,Str. Black Coated, Golden Rings , Tungsten Carbide Metzenbaum-Dissect.Scis.26Cm,Cvd. Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.26Cm,Str. Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.30Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.30Cm,Str. Black Coated , Tungsten Carbide Metzenbaum-Dissecting.Scissors , Watson-Cheyne Double End Dissector, 13Cm , Hinterman K-Wire Distractor / Retractor - Small, Large , Hand Held Doppler Machine Portable With Pointed 8Mhz Prob For Bedside Evaluation Of Blood Flow Status , Battery Operated Power Drill (With Batteries - 2 Nos + Charger-1 No) , Hand Drill Jacob Chuck With Key , Long Cannulated Screw Driver , Screw Drivers 3.5 Mm : Length 200 Mm Non Cannulated , Screw Drivers 3.5 Mm : Length 250 Mm Non Cannulated , Screw Drivers 4.5 Mm : Length 250 Mm Non Cannulated , Cobbs Spinal Elevator Straight & Angled , Periosteal Elevator , Bone File S/S Compatible With Power Reamer Attachment , Fibre Optic Cable With Adopter Length 8.5 Feet Or 260Cm(Compatible With Karl Storz Light Source) , 8 Ferris Smith Forceps , Allies Tissue Forceps 150Mm , Debakey Dissecting Forceps With Tungsten Carbide Tip, Round Handle,Must Be Useful For Needle Pulling Of 5 0 And 6 0 Suture Needles. 15Cm Length And 2Mm Jaw. , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 5 , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 7 , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 8 , Forceps Mosquito Curved Arteries Curved Serrated Jaw 5 , Forceps Spencerwell Cd Arteries , Hudson Nontoothed Forceps , Hudson Toothed Forceps 170Mm , Leksell Rongeur , Micro-Necro Forceps With Debakey Autramatic Jaw, Round Handle, 15Cm Total Langth And 1.2Mm Jaw. , Rhoton Micro-Forceps 15Cm/Ø8mm Handle,With Tying Platform 6X0.7Mm, Straight Jaw With Diamond Dust , Rhoton Micro-Forceps 15Cm/Ø8mm Handle, Diamand Coated Ring Jaws 2X1mm,With Guide Pin , Rhoton Micro-Forceps 15Cm/Ø8mm Handle, Diamand Dust Ring Jaws 1X.5Mm,With Guide Pin , Ruskin-Liston Bone Cutting Forceps, Length 18Cm, Straight, Ceramic Black Coated - Bite Size 3, 4, 5 ,6 Mm , Ruskin-Liston Bone Cutting Forceps, Length 18Cm, Curved, Ceramic Black Coated - Bite Size 3, 4, 5 ,6 Mm , Silver Non-Stick Bipolar Forceps With European Style Flat Pin Width Of Tips Sizes From 0.3Mm To 2.0Mm, Length 150Mm To 220Mm , Silver Non-Stick Bipolar Forceps With European Style Flat Pin With Round Handle With Golf Ball Finish Width Of Tips From 0.3Mm To 2.0Mm, Length 150Mm To 220Mm , Standard Dissection Forceps - Plain Tip,2Mm Tip - 110 To 130 Mm Long , Standard Dissection Forceps - Plain Tip, 3Mm Tip - 140To 160Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -180Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -230Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -305Mm Long , Standard Dissection Forceps - Toothedtip,3 Mm Tip -230Mm Long , Standard Dissection Forceps - Toothedtip,4Mm Tip -305Mm Long , Standard Dissection Forceps - Toothedtip, 2.5 Mm Tip - 140To 160Mm Long , Standard Dissection Forceps - Toothedtip, 2Mm Tip - 110 To 130 Mm Long , Standard Dissection Forceps - Toothedtip, 3 Mm Tip -205 Mm Long , Tillys Forceps , Depth Gauge Big 3.5 Mm , Length 250 , Depth Gauge Medium 3.5 Mm , Length 200 , Depth Gauge Medium 4.5 Mm , Length 200 , Depth Gauge Small 3.5 Mm , Length 150 , Depth Gauge Small 4.5 Mm , Length 150 , Bone Graft Punches Large 254 Mm, Head Dia 12X18mm Straight & Angled , Bone Graft Punches Small 254 Mm, Head Dia 9X15mm Straight & Angled , Guide Wire Aiming And Repositioning Device1.Should Allow 5 Degree Angulation And 5 Mm Offset Insertion 2. Should Accommodate Guide Wires Upto 3.2 Mm , Spring Handle Micro Scissor Curved Jaw, Total Length 14,5Cm,Round Handle , Spring Handle Micro Scissor Straight Jaw, Total Length 14,5Cm,Round Handle , T Handle For Shanz Pin Insertion With Jacob Chuck 140 Mm, Chuck Key , Curved Needle Holder Large , Debakey Needle Holder- Tungsten Cardbide Tip - Withstraight Jaws For Suture Size5-0 Ring Handle, - With Ratchet240-250 Mm Long , Debakey Needle Holder - Tungsten Cardbide Tip - With Straight Jaws For Suture Size 2-0, 3-0 & 4-0 Ring Handle, - With Ratchet 150-180Mm Long , Debakey Needle Holder Tungsten Cardbide Tip - With Straight Jaws For Suture Size 2-0, 3-0 & 4-0 Ring Handle, - With Ratchet 200-220Mm Long , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 1: 140 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 2:185 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 3:205 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 4:230Mm Long) , Mayo Needle Holder Straight Wide Cross Serrated Jaws 7 , Micro-Needle Holder Round Handle, With Ratchet, Total Length 15Cm, Handle Ø8mm, Straight Jaw , Jaws11x1.5Mm, Diamond Dust Jaws, Streamlined. Should Accommodate 60 Suture Needle. , Micro-Needle Holder Round Handle, With Ratchet, Total Length 15Cm, Handle Ø8mm, Straight Jaw , Jaws11x2mm, Diamond Dust Jaws, Streamlined. Should Accommodate 50 Suture Needle. , Straight Needle Holder Small, Med, Large , Tungsten Carbide Crile-Wood Needle Holder 15Cm , Tungsten Carbide Crile-Wood Needle Holder 15Cm Black Coated , Tungsten Carbide Crile-Wood Needle Holder 18Cm , Tungsten Carbide Crile-Wood Needle Holder 20Cm , Tungsten Carbide Crile-Wood Needle Holder 22Cm , Tungsten Carbide Crile-Wood Needle Holder 23Cm , Tungsten Carbide Mayo-Hegar Needle Holder 14Cm , Tungsten Carbide Mayo-Hegar Needle Holder 16Cm , Tungsten Carbide Mayo-Hegar Needle Holder 18Cm , Tungsten Carbide Mayo-Hegar Needle Holder 18Cm Black Coated , Tungsten Carbide Mayo-Hegar Needle Holder 20Cm , Tungsten Carbide Mayo-Hegar Needle Holder 24Cm , Tungsten Carbide Mayo-Hegar Needle Holder 26Cm , Tungsten Carbide Micro-Vascular Needle Holder 14Cm , Tungsten Carbide Micro-Vascular Needle Holder 18Cm , Tungsten Carbide Micro-Vascular Needle Holder 20Cm , Tungsten Carbide Micro-Vascular Needle Holder 23Cm , Tungsten Carbide Micro-Vascular Needle Holder 26Cm , Bone Hook Small, Med, Big , Love Nerve Hook Ball Tip , Love Nerve Hook Blunt , Femoral Head Impactor Nylon Faced , Graft Impactor Offset Foot 30 Degree 4 X 12 Mm , Beyers Bone Nibbler 7 Long , Ruskin Mini Curved Bone Nibbler 6 Long , Nitinol Wire , Detachable Handle Compatible For Fine Osteotome Thin Slender Stem. , Curved Osteotome For Acetabulum , Hibbs Osteotomes Thin Solid Forged 203 Mm - 10 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 15 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 20 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 5 Mm Wide Str & Cvd , L Osteotomes For Spinal Osteotomies , Femoral Head Template 42-58Mm (Increment Of 2 Mm) , Radiolucent Pelvic Retractor,Medium - Length 268 Mm & Large - Length 323 Mm , Wirepasser , Beath Pin Drill Tip , Beath Pin Spade Tip , Plier Flat Nose , Pliers Heavy Duty , Pliers With Side Cutters For Wire Upto 2.5 Mm Chromium Plated , Ball Tipped Love Nerve Root Probe 1.5 X 4Mm Tip , 200 Mm Length , Ball Tipped Love Nerve Root Probe 1.5 X 3Mm Tip , 200 Mm Length , Foraminotomy Punch, Downcurved Shaft, Small Handle, 20Cm, 2Mm Bite , Foraminotomy Punch, Down Curved Shaft, Small Handle, 20Cm, 3Mm Bite , Foraminotomy Punch, Upcurved Shaft, Small Handle, 20Cm, 2Mm Bite , Foraminotomy Punch, Upcurved Shaft, Small Handle, 20Cm, 3Mm Bite , Kerrison Punch Down Cutting 2 To 3 Mm 45 Deg , Kerrison Punch Down Cutting 2 To 3 Mm 90 Deg , Kerrison Punch Up Cutting 1Mm To 4Mm , Handle For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish) , Handle For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Black Coated) , 2 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 3 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 4 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 5 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 2 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 3 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 4 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 5 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , Depth Gauge Big 4.5 Mm , Length 250 , Box Wrench For Bolt , Box Wrench For Nut , 4 Prong Retractors , Acromial Retractor Medium , Acromial Retractor Small , Anterior Capsular Retractor , Anterior Glenoid Neck Retractor , Blunt Point Gelpi Retractor , Charnley Initial Incision Retractor : 308 Mm With Ball, Hook And Chain , Deltoid Retractor , Deltoid Retractor Large , Deltoid Retractors Small , Fine Suction Nozzles Frazier Retractor , Fine Suction Nozzles Mcguckins Retractor , Gelpi-De Bakey Retractor 15Cm , Gelpi-Loktite Retractor 18Cm , Gelpi-Seletz Retractor 15Cm , Gerdar Subacromian Retractor , Hand Held Deltoid Retractor , Higs Retractor , Hinged Gelpi Retractor , Hohmann Retractor 10 Mm Width, Small, Short Narrow Tip 220 Mm Length , Hohmann Retractor 6 Mm Width, Small, Short Narrow Tip 160 Mm Length , Hohmann Retractor 8 Mm Width, Small, Short Narrow Tip 160 Mm Length , Humeral Head Retractors , Jackson-Burrows Retractor 18Cm,Blunt , Kolbel Self Retaining Glenoid Retractor With Cutter Blade Set , Langenbeck Retractor Large Straight , Langenbeck Retractor Medium , Mitchell Rugine Retractor Fan Shaped Straight Sharp Edge 210 Mm , Modified Fukuda Retractor Large , Modified Fukuda Retractor Small , Nerve Root Retractor , Pectoral Retractor Large , Pectoral Retractor Small , Rang Retractors - Set Of 2 For Sciatic Notch , Richardsons Retractor , Scofield Retractor , Self Retaining Retractor Frame (Shoulder) , Weitlander Retractor , Bone Nibbler/Rongeur Docuble Action Fine Straight & Angled Length 190 Mm , Bone Nibbler/Rongeur Docuble Action Fine Straight & Angled Length 250 Mm , Bone Nibbler/Rongeur Docuble Action Forward Angled Length 250 Mm , Bone Nibbler/Rongeur Docuble Action Straight & Angled Length 190 Mm , Bone Nibbler/Rongeur Docuble Action Straight & Angled Length 250 Mm , Disc Rongeurs (Pitutary Disc Forceps) Angled Sizes 1Mm To 4Mm , Disc Rongeurs (Pitutary Disc Forceps) Straight Sizes 1Mm To 4Mm , Echlin Bone Rongeur Forcep 23Cm/2Mm To 4Mm,Straight , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Curved Down, Detachable , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Curved Up, Detachable , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Straight, Detachable , Ruskin Bone Rongeur Forcep, Double Action 18Cm Length/Bite Size 4Mm To 5Mm, Straight,Ceramic Black Coated , Battery Operated Power Saw (With Batteries - 2 Nos + Charger-1 No) , Measuring Scale - 15 Cm , Measuring Scale - 30 Cm , Kilner Scissors 5 Straight & Curved , Mayo Scissors - With Tungsten Carbide Edges - Curved, Large 230 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Curved, Medium170 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Curved, Small145mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Large 230 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Medium170 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Small145mm Long , Metzenbaum Scissors -With Tungsten Carbide Edges - Lazy S Curved, 205 Mm Long , Metzenbaum Scissors -With Tungsten Carbide Edges - Lazy S Curved, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved,115Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 145 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 205 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 260 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 285 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 300 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Lazy S Curved, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight,300 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 115Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 145 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 205 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 260 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 285 Mm Long , Plaster Cutting Scissors , Scissors For Cutting Poly Proplene Suture Material And 10 Suturematerial - One Side Of The Blade With Serration And Another Side With Tungesten Carbide Tip - Available Lengths: 6, 7, 8 , Scissors Metzenbaum 5 Straight & Curved , Scissors Metzenbaum 7 Straight & Curved , Tungsten Carbide Mayo Scissor 17Cm, Straight, Black Coated, Golden Handles , Tungsten Carbide Mayo-Stille Scissor 17Cm,Curved Titan Nitrite Coated-Copper , Charnley Scoop Long Small & Medium , Scoop Double Ended Fine , Continuous Band Sealer Machine For Packing Instruments And Implants For Plasma Sterilization , Hoen Dura Separator 15Cm/45° , Hoen Dura Separator 15Cm/90° , Subscapulers Spreader , Tendon Stripper With Rotating Blade For Iliotibial Tract , Suction Appratus Mobile With Disposable/Bio-Degradable Consumable Sealed Containers , Yankauer Suction Nozzle , Wire Tensioner (Tbw) , Wire Tensioner Direct Measure , Fukushima Suction Tube Conical Wl 115Mm/ Fr.6 To 8, Flexible , Guide Wire 2Mmx40 , Guidewire 2.5Mmx40 , Ss Wire Cutters , Combination Wrench 10,11 , Triangle Support Knee Positioning Large & Standard , Xiii - Special Quantity Items - Paediatric Implants , Micrometric Swivelling Clamp, Of-Garches, T-Clamp, Multiplanar Clamp Compatible With Paediatric Limb Reconstruction System (Lrs) , Mini-Rail Lengthener With Articulation For Short(Upto 32.5Mm), Standard(Upto 57.5Mm) & Long(Upto 135.5Mm) , Mini-Rail Lengthener Without Articulation For Short(Upto 32.5Mm), Standard(Upto 57.5Mm) & Long(Upto 135.5Mm) , Bone Screw - With Taper Thread Design, Self Tapping Design - Length 150 - 260Mm; Thread Length 30 - 90Mm; 6Mm Shaft Diameter , Xiv - Non-Consumables , Bite Sizes : 2 To 5 (Upcutting And Down Cutting Detachable Tips, 40Degrees And 90 Degrees) , Fine Osteotome Thin Slender Stem, Sizes - 2 To 10Mm Compatible With Detachable Handle , Chisel Blades With Handle Width 10 Mm, Short, Width 10 Mm, Long, Width 16 Mm, Short, Width 16 Mm, Long, Width 25 Mm, Short, Width 25 Mm, Long, Width 5 Mm, Short, Width 5 Mm, Long , Curved Chisel Blades With Handle Width 10 Mm, Width 16 Mm, Width 25 Mm , Pelvic Osteotomes- Straight, Angled, Short Angled Bayonet Shaped, Flag Shaped (15 & 20Mm Width) , Pelvic Osteotomy Chisel, Curved Length 304/134 Mm, Width 15 & 20Mm , Pelvic Osteotomy Chisel, Curved Length 309 Mm, Width 15 & 20Mm , Radiolucent Hohman Retractors Width 8 Mm, Length 220 Mm, Width 22 Mm, Length 250 Mm, Width 35 Mm, Length 275 Mm, Width 18 Mm, Length 240 Mm, Width 24 Mm, Length 267 Mm , Radiolucent Pelvic Retractor (260 Mm & 320Mm Length) , Cannulated Reamers Set With T-Handle Sizes : 6Mm To 13Mm , Army - Navy Retractor - Set Of 2 Right Angled , 8 1/2 Inch , Shoulder Positioning (Traction) Assembly For Shoulder Surgery (Lateral Decubitus & Beach Chair Position) , Arthroscopic Probe , Arthroscopic Resector Cutters 3.5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Resector Cutters 5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Aggressive Plus Cutters 3.5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Aggressive Plus Cutters 5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Tomcat Cutters 3.5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Tomcat Cutters 5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Standard 12 Flute Round Burr Compatible With Stryker Shaver System , Arthroscopic Standard 6 Flute Round Burr Compatible With Stryker Shaver System , Homann Retractor - Assorted Sizes , Osteotomes (Unibody Design) - Straight And Curved - Assorted Sizes , Biodegradable Calcium Sufate Granules (Powder And Liquid) For Antibiotic Delivery - 5 Cc , Biodegradable Calcium Sufate Granules (Powder And Liquid) For Antibiotic Delivery - 10 Cc , Stockinette - Cotton - 100Mm (10 Meters Roll) , Stockinette - Cotton - 200Mm (10 Meters Roll) , Continuous Band Sealing Machine , Xv - Miscellaneous - Plates, Foot & Ankle Implants , 2.4/2.7 Mm Linear Smallmetatarsal Lcp4- 8 Holed , 2.4/2.7 Mm Metatarsal L Oblique Lcp 2-6 Holed Right And Left , 2.4/2.7 Mm Rhomboid Shaped Cuboid Lcpright And Left , 2.4/2.7 Mm Curvilinear Talus Lcp 6 Holed , 2.4/2.7 Mm Curvilinear Lcp With Multiple Central Flanges For Naviculum 7 Holed , 2.4/2.7 Mm Y Shaped Metatarsal Lcp 3-7 Holed , Hindfoot Ankle Arthrodesis Straight Nail With 3 Distal Locking For Calcaneum (3.9/4.9 Mm2 Lateral To Medial And 1 Posterior To Anterior) And 3 Proximal Locking Options ( With One Dynamic Locking ) , 3.5 Mm Rhomboid Plate For Lisfranc Arthrodesis /Tn Arthrodesis , 3.5 Mm Calcaneal Perimeter Plate With Locking Scew Holes Along The Perimeter Of Calcaneumand Two Connecting Bars Between Superior And Inferior Perimeters , 2, 2.5Mm T Plate, L Plate And Straight Plates For Talus Neck Fixation , 2.4/2.7Mm Radial Styloid Plate , 2.4/2.7Mmdistal Radius Column Specific Plates , Rinm Plates , Pi Plates , 2.4/2.7Mm Olecranon Locking Plate , 3.5Mm Mattaplatewith 4 -14 Hole, & Quadri Lateral Plate Extension . The Intrapelvic Acetabularplate Schould Have Pelvic Brim Plate Withmedial Flange For Quadrilatreral Plate Fixation . It Should Be Insertable Through Aip Approach , 2.7 /2.4Mm Distal Ulna Locking Plate , 3.5Mm Proximal Tibia Posteromedial Plate From 4 H To 10 Holes , 4.5Mm Double Angle Blade Plate. The Angle Blade Plate Should Have Multiple Angles, 125-135 And Multiple Bladelengths 50-100. Distal Holes 4 To 12 Holes .Case To Case Basis The Supplier Should Be Able To Provide Sizes Which Is Needed , 2.7Mm Distal Fibula Locking Plate , 3.5Mm Medial Distal Tibia Low Profilelocking Plate From 6 Holes To 14 Holes , 3.5Mm Posterior Malleolus Anatonical Plate , Patella Plates/Basket Plates , 3.5Mm Anterolateral Distal Tibia Plates Of Various Lengths From 4 Holes To 14 Holes , 2.4Mm/2.7Mm 4 Corner Fusion Plate For Wrist , 3.5Mm Proximal Lateral Tibia Plates Of Various Lengths From 4 Holes To 14 Holes , 3.5Mm Pubic Symphysis Plate With 3 Holes On Eiither Side , 4.5Mm Proximal Tibia Low Profile Low Bend Hockey Stickplate 4 To 16 Holes , 95 Degree Angle Blade Plate 4 To 14 Holes , 125/13/135 Degree Single Angle Blade Plate 50 To 100Mm Blade Length .. Plate Length 4 Tio 12 Holes , 3.5Mm Recon Plates 4 Holes To 14 Holes , Locking Recon 3.5Mm4 Holes To 15 Holes , Lcp 4 Hole To 14 Holes 3.5Mmstraight , Semitubular Plate 3.5Mm Locking 4 To 14 Hole , Semitubular Plate 3.5Mm Plain4 To 14 Hole , Dhs Of Angles 125 /130 /135 Degrees From 4 To 8 Holes , Knee Arthrodesis Nail Of Lenth 65 To 90 Mm , 3.5Mm Philos Plate 2 Hole To 10 Hole , 3.5Mm Proximal Tibia Medial T Plate From 4 H To 10 Holes , 3.5Mmposterolateral Extraarticular Humerus Anatomical Lockingj Shaped Hiockey Stick Plate , 2.7Mm/3.5Mm Distal Humerus Anatomical Plates Posterolateral(90/90), Medial , Lateral (Parallel Configuration ) , 2.7/3.5Mm Scapular Lateral Border Anatomical Plates , 3.5Mm Olecranon Hook Plates , 2.7Mm Clavicle Anatomical Plate , 3.5Mm Washer For Screws , 7Mm Washer For Screws , Steinmann Pin 3.5Mm - Length 150Mm , Steinmann Pin 3.5Mm - Length 200Mm , Steinmann Pin 4 Mm - Length 150Mm , Steinmann Pin 4 Mm - Length 200Mm , Steinmann Pin 5 Mm - Length 250Mm , 3.5Mm Ss Lcp - 6,7,8 Holes , 3.5Mm Ss Re-Construction Lcp - 6,7,8 Holes , 4.5Mm Narrow Lcp - 8,9,10,11 Holes , 4.5Mm Broad Lcp - 9,10,11 Holes , 3.5Mm Non-Lockingdcp - 7 Holes , 3.5Mm Non-Lockinglcdcp - 7 Holes , Adult Conical Schanz Pin 4Mm - 30, 40, 50, 60 Threaded , Adult Conical Schanz Pin 5Mm - 30, 40, 50, 60 Threaded , Adult Conical Schanz Pin 6Mm - 30, 40, 50, 60 Threaded , 1.2Mm K-Wirenon Threaded , 2Mm K-Wirenon Threaded , 2.2Mm K-Wirenon Threaded

BOQ

Name of Work: Rate Contract for supply of consumables and non-consumables for the Department of Orthopeadics, Puducherry – 605 006
Sl. No. Item Description
1I - RING FIXATION SYSTEM - The raw material used for implants shoud be SS 316-L conforming to ASTM F 138-97 or ISO-5832-1 Certificateconfirming to this from raw material supplier at billet level should be submitted.
2Half Rings - Dia : 100mm.
3Half Rings - Dia : 120mm.
4Half Rings - Dia : 130mm.
5Half Rings - Dia : 140mm.
6Half Rings - Dia : 150mm.
7Half Rings - Dia : 160mm.
85/8 Ring - 160mm
9Threaded Rods
10Size : 80 mm
11Size : 100mm
12Size : 120 mm
13Size : 150 mm
14Size : 200 mm
15Size : 250 mm
16Size : 300 mm
17Threaded rods : Slotted
18Size : 60 mm
19Graduated Telescopic Rods - Size 150mm
20Post- Male/Female
21Male Size : 3 Holes
22Female Size : 3 Holes
23Hinges male Standard
24Hinges male Low profile.
25Hinges female Standard
26Hinges female Low Profile
27Hinges-90 degree Standard
28Hinges-90 degree Low profile
29Long Connection Plates
30Size : 8 Holes, 155 mm
31Connected Plates with Threaded ends
32Size : 7 Holes, Length 175 mm
33Short Conn.Plate 2 Holes Length 35mm
34Short Conn.Plate 3 Holes Length 45mm
35Twisted Plates - Size:3 Holes Length 65mm
36Twisted Plates - Size: 2 Holes plates
37Bayonet Point-Cortical 1.8mm x 370mm
38Wire Fixation Buckle
39Wire fixation Bolt\" Cannulated
40Wire fixation Bolt Slotted
41Bolt, 6\" Size : 10 mm
42Bolt, 6\" Size : 16 mm
43Bolt, 6\" Size : 30 mm
44Slotted Washers 4.0mm
45Spacing Washers 2.0mm
46Flat Sided Washers 2.0mm
47Flat Sided Washers 4.0mm
48Nut 6mm
49Nylon Insert Nut
50Square Nut
51Threaded Socket,Size : 20 mm
52Threaded Socket, Size : 30 mm
53Threaded Socket, Size : 40 mm
54Blocks for Half Pins
55Size : 1 Holes
56Size : 2 Holes
57Size : 3 Holes
58Size : 4 Holes
59Sleeves 6mm
60Set screws
6190 deg. Arch,Large size
62120 deg.Arch,Large size
63Oblique Support
64Olive Wire with stopper made out of single piece
65Composite Foot Rings with Carbon Reinforcement Short Arm
66Composite Foot Rings with Carbon Reinforcement Long Arm
67II - The Rail Fixation System: Adult (The raw material used for implants shoud be SS 316-L conforming to ASTM F 138-97 or ISO-5832-1 Certificateconfirming to this from raw material supplier at billet level should be submitted.) (INSTRUMENTS)
68Trocar
69Drill Bits 3.2x200mm
70Drill Bits 4.8x200mm
71Templates
72Forendclampandcentralclamp
73ForSwivel Clamp
74Drill Guides 6x3.2x40
75Drill Guides 6x3.2x80
76Drill Guides 6x5x40
77Drill Guides 6x5x80:8 Nos.
78Drill Guides 5x2x43mm
79Drill Guides 5x2x83mm
80Screw Guide 8x6x60mm
81Screw Guide 8x6x100mm
82AllenKey 6mm
83Appliances:
84Rail - 240mm long
85Rail - 300mm long
86Rail - 400mm long
87CD Unit
8840 mm
8980 mm
90Implants - Tapered pin 6mm to 5mm
91Length 130mm thread length30mm
92Length130mmthreadlength40mm
93Length130mmthreadlength50mm
94Length150mmthreadlength30mm
95Length150mmthreadlength40mm
96Length150mmthreadlength50mm
97Length170mmthreadlength40mm
98Length170mmthreadlength50mm
99Length170mmthreadlength60mm
100Length200mmthreadlength40mm
101Length200mmthreadlength50mm
102Length200mmthreadlength60mm
103Tapered 6mm to 5mm-With Hydroxyapetite Coating for Threads
104Length130mmThreadLength30mm
105Length130mmThreadLength40mm
106Length130mmThreadLength50mm
107Length150mmThreadLength30mm
108Length150mmThreadLength40mm
109Length150mmThreadLength50mm
110Length170mmThreadLength40mm
111Length170mmThreadLength50mm
112Length170mmThreadLength60mm
113Length200mmThreadLength40mm
114Length200mmThreadLength50mm
115Length200mmThreadLength60mm
116Container
117Container for Rail Fixator System for Appliances
118Container for Rail Fixator System for Instruments
119Container for Rail Fixator System for Implants
120The Rail Fixation System: Pediatric - Appliances
121CD Unit-Pediatric
122Rail-Pediatric
123150mm
124200mm
125250mm
126Central Clamp-Pediatric
127End clamp-Pediatric
128Swivel clamp-Pediatric
129T clamp Pediatric
130Implants:Tapered 4.5mm to 3.5mm
131Length100mmthreadlength20mm
132Length100mmthreadlength30mm
133Length120mmthreadlength30mm
134Length120mmthreadlength40mm
135Tapered4.5mmto3.5mm-WithHydroxyapetiteCoatingforThreads
136Length100mmThreadLength20mm
137Length100mmThreadLength30mm
138Length120mmThreadLength30mm
139Length120mmThreadLength40mm
140Instruments:
141ScrewGuide;8x6x60mm8nos
142Drillguide-6x3.2x40mm-8nos
143Drillbit3.2x200mm
144HalfPinintroducerDtype
145AllenKey - 5mm
146Templates for pediatric end and central clamp
147Template for Pediatric swivel clamp
148Container for Pediatric Rail Fixator System appliances
149Container for Pediatric Rail Fixator System Instruments
150Container for Pediatric Rail Fixator System Implants
151III - CONSUMABLES -ARTHROPLASTY
152Hip prosthesis-Femoral – Uncemented – Bipolar - fixed (Fenestrated) STERILE PACKING; Sizes : between 35mm and 53mm (Unused sizes will be exchanged for used-up sizes during the course of tender contract period at no further costs)
153Hip prosthesis- Femoral – Cemented – Bipolar- Fixed(non-fenestrated) STERILE PACKING; Sizes : between35mm and 53mm(Unused sizes will be exchanged for used-up sizes during the course of tender contract period at no further costs)
154Hip prosthesis- Femoral – Cemented – Bipolar – Modular (Mueller type)Each unit consists one number of variable sizes of1. Cemented Femoral Stem2. Bone Cement ( antibiotic cement 40 gms)3. Bipolar Cup (Shell and UHMWPE insert)4. Femoral head(Unused sizes will be exchanged for used up sizes during the course of tender contract period at no further costs)
155Hip prosthesis- Femoral – Uncemented – Bipolar – Modular (Mueller type)Each unit consists one number of variable sizes of1. Uncemented Stem2. Bipolar Cup ((Shell and UHMWPE insert)3. Femoral head ( Unused sizes will be exchanged for used up sizes during the course of the year at no further costs)
156Hip prosthesis- Femoral – Uncemented – Revision- Modular Femoral stem with separate distal and proximal sizing – consisting of separate coated metaphyseal sleeve of various sizes, Standard andlateral neck components of varying lengths and offset and uncemented stem of varying lengthEach unit consists ofone number of variable sizes of1. Uncemented modular femoral stem2. Uncemented modular metaphyseal stem3. Neck component4. Femoral head5. Uncemented porous coated cup. 6.Acetabular cup liner UHMWPE7. Cancellous bone screws 6.5mm ( 2 Nos – 20mm,25mm )(Shelf life of all items prior to expiry date must be at least 3 years )
157Hip prosthesis- Total – Cemented Each unit consists one number of variable sizes of1.Cemented Femoral stem (Triple taper type)2.Cemented UHMWPE flanged cup.3. Femoral head – Diameter 28mm/ 32mm/ 36 mm with adjustable neck length4. Cement restrictor5. Canal centraliser6. Antibiotic Bone cement (2 packets of 40g each)(Shelf life of all items, prior to expiry date must be at least 3-5 years)
158Hip prosthesis- Total – Uncemented Each unit consistsofone number of variable sizes of 1.Uncemented Femoral stem- HA coated2.Uncemented porous coated cup. 3.Acetabular cup liner UHMWPE4. Femoral head – Diameter 28mm / 32mm/ , 36 mm / with adjustable neck lengths5.Cancellous bone screws 6.5mm ( 2 Nos – 20mm,25mm )(Shelf life of all items prior to expiry date must be at least 3-5 years )
159Knee prosthesis- Total – Cemented Each unit consists one of number of variable sizes of1. Femoral component (CoCr) Right/left2. Tibial tray keeled(CoCr)3. UHMWPE tibial insert4. UHMWPE patella component fixed5. 2 Packets of antibiotic cement 20 gms each(Shelf life of all items prior to expiry date must be at least 3-5 years)
160Megaprosthesis Distal femur Each unit consists of one number of variable sizes of1.Distal femur component Right2. Proximal tibia component3. Resection piece4. Intramedullary stem5. Antibiotic bone cement 40gm - 02 nos
161Megaprosthesis Distal femur Each unit consists of one number of variable sizes of1.Distal femur component Left2. Proximal tibia component3. Resection piece4. Intramedullary stem5. Antibiotic bone cement 40gm - 02 nos
162Megaprosthesis Proximal femur - Each unit consists of one number of variable sizes of 1.Modular Bipolar cup2. Modular head trochanteric component.Right3. resection piece.4. Intramedullary stem piece5. Antibiotic bone cement 40gm - 01nos.
163Megaprosthesis Proximal femur - Each unit consists of one number of variable sizes of 1.Modular Bipolar cup2. Modular head trochanteric component.Left3. resection piece.4. Intramedullary stem piece5. Antibiotic bone cement 40gm - 01nos.
164Megaprosthesis Proximal Humerus- Each unit consists of one number of variable sizes of1.Proximal humerus component Right/Left 2.Resection piece.3. Humeral Intramedullary stem4. Antibioticcement 20gm - 02nos
165Megaprosthesis Proximal Tibia -Each unit consists of one number of variable sizes of1.Distal femur component Right2.Proximal tibia component 3.Resection piece4.Intramedullary stem5. Antibioticcement 40gm - 02 nos
166Megaprosthesis Proximal Tibia -Each unit consists of one number of variable sizes of1.Distal femur component Left2.Proximal tibia component 3.Resection piece4.Intramedullary stem5. Antibioticcement 40gm - 02 nos
167Megaprosthesis Total femurEach unit consists of one number of variable sizes of1. Proximal femur head component comprising of Modular bipolar cup 2.Modular head, trochanteric component Left/Right/Neutral.3. Resection coupler4. Resection piece 5.Distal femur component6.Proximal tibia component7. AntibioticCement 40gm 03 nos.
168Shoulder prosthesis – Humeral - modularconsisting of cemented humeral stems of various sizes with Humeral head (various options) with the option of combining different humeral stems with humeral head separatelyEach unit consists of one number of variable sizes of1. Cemented modular humeral component 2Humeral head3. One packets of antibiotic cement 20 gms(Shelf life of all items prior to expiry date must be at least 3 years )
169Elbow prosthesis – Total–Cemented- modular Cemented prosthesis with various humeral lengths and sizes with anatomical ulnar stems of varying sizesEach unit consistsof one number of variable sizes of1. Cemented modular distal humeral component2. Cemented ulnar component Right/Left3. Two packets of antibiotic cement 20 gms each(Shelf life of all items prior to expiry date must be at least 3-5 years )
170Radial head prosthesis – Cemented(Implant with straight and curved stems, head (of varying head diameter and height)
171Dual mobility Uncemented Total Hip Replacement consists of 1.HA Coated Femoral Stem2.Acetabulat Shell3.Linear Cup Polyethyelene 4.Co-Cr Head
172Revision acetabular Cup - Uncemented1.Porous Coated-2 Nos.2.Cup cage construction-1 No.3.Triflange- 1 No.
173Antibiotic Bone cement 40g High viscosity
174Antibiotic Bone cement 40g Low viscosity, for use in cement gun
175Cement mixing system, Each unit consists one number of1. Cement mixing system (Vacuum based)2.Femoral break way nozzle3. Pressuriser.The sample must be compatible with the(Shelf life of all items prior to expiry date must be at least 3-5 years)
176IV - CONSUMABLES - SPINE
177Spine BIOPSY KITTissue Bipsy device provided with ergonomic handle.The needle should be equipped with a cannula made of AISI 304 stainless tempered steel in accordance with international standards The needle should have centimeter markings on the cannula surface, allow to easily determine the depth of insertion into the bone tissue. should have special sharpening at “fish mouth” of the needle tip. the sample architecture.Needle should improve the penetration capacity establishing a perfect cylindrical cutting that maintains intactThe set shouldinclude: -extraction wire to insert into the cannula tip - Luer-lock cap (on the handle) to avoid the blood loss during the extraction step.Needle should be equipped with a stylet with trocar pyramidal tip to allow a quick and less invasive penetration into the cortical.
178Demineralised bone matrix 2.5cc
179Demineralised bone matrix 5 cc
180Bone Substitutes This should be an rhBMP-2 (recombinant human bone morphogenetic protein-2) formulation combined with a bovine-derived absorbable collagen sponge (ACS) carrier. Should be FDA & DGCI APPROVED
181OLIF/ XLIF cage
182Stand alone OLIF \"/ DLIF cage assembly - cage plug screws
183Expandable cages \"/ interbody spacers for use in dorsal and lumbar spine made of Titanium.Should have USFDA & DGCI Approval.Instrumentation should be provided at the time of surgery. (assorted sizes).
184Interbody cages made of Trabecular Metal Material for use in lumbar spine fusion. Instrumentation should be provided at the time of surgery. (assorted sizes).
185Lumbar Interbody PEEK cage: Interbody Implant for use inLumbar interbody fusion. (assorted sizes).
186Lumbar Interbody Titanium cage : Interbody Implant for use in Transforaminal lumbar interbody fusion (TLIF) procedures (assorted sizes).
187Extended Tandem Connectors for 4.5 rod systemfor Paediatric deformity to facilitate intra-operative compression and \"/ or distraction maneuvers
188Spinal rod to rod connectors compatable with 5.5 mm Titanium rods
189Domino Rod to Rod Connector (Open Type) Compatable with 5.5 mm rod
190Domino Rod to Rod Connector (Closed Type) Compatable with 5.5 mm rod
191Transverse connector assembly \"/ cross-links assembly for lumbar spine compatible with 5.5 mm rods (Titanium) US FDA & DGCI APPROVED. Instrumentaion should be provided at the time of surgery.
192PAEDIATRIC SPINE HOOKS (Compatible with 4.5mm rods) ASSORTED TYPES( supralaminar, infralaminar, pedicle and transverse process hooks)
193ADULT SPINE HOOKS (Compatible with 5.5 mm rods) ASSORTED TYPES( supralaminar, infralaminar, pedicle and transverse process hooks)
194Kyphoplasty kit - with 1 baloon and kyphoplasty cement
195Titanium mesh cage(Harms type cage) assorted sizes
1965.5 mmRod for MIS SurgeryRods should Reduces trauma to patient avoidingadditional incisions for rod insertion
1975.5 mm Rods for spine fixation (Titanium), 400mm
1985.5 mm Rods for spine fixation (Cobalt Chrome),400mm
199G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
200G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
201G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
202G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
203G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
204Dual Lead titanium pedicle screw with square thread closure mechanismcompatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
205Dual Lead titanium pedicle screw with square thread closure mechanismcompatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
206Dual Lead titanium pedicle screw with square thread closure mechanismcompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
207Dual Lead titanium pedicle screw with square thread closure mechanismcompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
208Dual Lead titanium pedicle screw with square thread closure mechanismcompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
209Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4 x 20 mm screw with set screw
210Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4 x 25 mm screw with set screw
211Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 20 mm screw with set screw
212Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 25 mm screw with set screw
213Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 30 mm screw with set screw
214Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
215Cannulated titanium pedicle screw for MIScompatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
216Cannulated titanium pedicle screw for MIScompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
217Cannulated titanium pedicle screw for MIScompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
218Cannulated titanium pedicle screw for MIScompatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
219S2 Alar iliac screws Titanium compatable with 5.5 mm rods. Assorted sizes.
220Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
221Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 5.5 x 45 mm screw with set screw
222Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
223Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
224Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.0 x 40 mm screw with set screw
225Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.5 x 45 mm screw with set screw
226Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.5 x 45 mm screw with set screw
227Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
228Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
229Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
230Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
231Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
232Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw.
233Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw.
234Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw.
235Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw.
236Titanium pedicle screws - Polyaxialcompatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 50 mm screw with set screw.
237Spine Pedical screws (Titanium) - PolyaxialReduction screws compatible with 5.5 mm Titanium rods, 5.5 x 40 mm with set screw
238Spine Pedical screws (Titanium) - PolyaxialReduction screws compatible with 5.5 mm Titanium rods, 5.5 x 45 mm with set screw
239Spine Pedical screws (Titanium) - PolyaxialReduction screws compatible with 5.5 mm Titanium rods, 6.5 x 40 mm with set screw
240Spine Pedical screws (Titanium) - PolyaxialReduction screws compatible with 5.5 mm Titanium rods, 6.5 x 45 mm with set screw
241Titanium pedicle screws - Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
242Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
243Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
244Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
245Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
246Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw.
247Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw.
248Titanium pedicle screws - Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw.
249Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw.
250Titanium pedicle screws -Fixed (Monoaxial)compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 50 mm screw with set screw.
251Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
252Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
253Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
254Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 25 mm screw with set screw.
255Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
256Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
257Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw and cement introducer assemby
258Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw and cement introducer assemby
259Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw and cement introducer assemby
260Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw and cement introducer assemby
261Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw and cement introducer assemby
262Vertebral Body Augmentation KITKIT Should contain vertebral body augmentation CementThis should allows for an 8-10 minute working time at 68F\"/20C, and enable a controlled introduction of cement.KIT Should Consists of a needle and a stylet for bone access. The needle also acts as a cannula through which the cement is introduced into the vertebraKIT Should Consist of 15 gauge biopsy needle consists of a needle and stylet intended for use through an 11 gauge or 13 gauge introducer needle.
263Low viscosity vertebropasty cement 20g
264Pre-bent sub-laminar wire
265V - CONSUMABLES -Arthroscopy
266Disposable arthroscopic diathermy cable with tip compatible with stryker diathermy console 90 degree
267Titanium suture disc
268ADJUSTABLE LOOP 4MM X 12MM
269Biocomposite Interference Screws of various lenght sizes from 23mm to 35mm with dia from 7mm to 11mm.Two sets of instrumentation should be provided on loaner basis.
270Knotless Ligament Anchor (2.6/3.5mm) [PEEK]
271Fibre loop Size 2 -0 with Straight needle
272Titanium interference screw sizes from 7 to 10mm of various lengths from 23 to 35mm with screw drivers. One set of instrumentation should be provided on loaner basis.
273PEER interference screw of various lenght sizes from 23mm to 35mm with dia from 6mm to 7mm.One set of instrumentation should be provided on loaner basis.
274FIBRE WIRE 2-0 Size with Needle (Curved)
275Titanium anchors with high tension suture material 2.8mm\"/3mm
2765mm suture anchor Titanium
277All Suture Anchors (1.5/1.8mm)
278A Sterile, disposable at least 20cm length flexible needles in pairs looped together with 2-0 Ultra high molecular weight polyethylene suture for inside out repair of meniscus
279A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Strainght)
280A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Right Curved)
281A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Left Curved)
282A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Reverse Curved)
283Fixation Button with loop for Acromio Clavicular Joint Stabilization
284VI - CONSUMABLES -PAEDIATRIC IMPLANTS
285PEDIATRIC DHS with lag screw and cortical screw assembly - 135 DEGREE(SHORT & LONG BARREL) with 3.5 mm screws, 3 TO 7HOLES
286Titanium /stainless steel telescopic Intramedullary nail consists of male & female; size : 2 - 6mm diameter, length : 20 - 40mm
287Cannulated Paediatric Osteotomy blade plate - Child Hip plate 3.5mm, angulation 90° with blade length 26, 32, 38mm and displacement 4mm, 8mm
288Cannulated Paediatric Osteotomy blade plate -Child Hip plate 4.5mm, angulation 80°, 90°, 100° with blade length 35, 45mm and displacement4 & 8mm
289Cannulated Paediatric Osteotomy blade plate -Infant Hip plate 3.5mm, angulation 90° with blade length 25, 32mm and displacement 7mm
290Cannulated Paediatric Osteotomy blade plate - Adolescent hip plate 4.5mm,angulation 90°, 95°, condylar plate - 5, 7, 9 holes with bladelength 40, 50, 60, 70mm.
291Medial high tibia plate compatible with Proximal tibia osteotomy system
292Proximal tibia osteotomy system;one each of - osteotomy chisels, bone spreader, gap measuring device
2933.5mm epiphyseal 8 shaped plate
294LCP PEDIATRIC HIP PLATES with screws (size-20-110mm) assembly 3.5 & 5mm, 3 to 9 HOLED, angles 90 to 130 degrees. provision for exchange of used implants should be made.
295Proximal femoral paediatric lcp plate system with screws
296Adolescent nailing system with nails and bolts for the paediatric shaft of femur fracture size 8-10mm diameter and length(240-400mm)
297Distal femoral osteotomy system with medial osteotomy tomo fix plates
298Enders nailing system with nails for femoral and tibial shaft fracture size 2- 5mm in diameter and length 240mm- 400mm
2992.4 distal radius variable angle styloid plate 4-8holes titanium 1 unit consists of 1 plate and locking screws for available holes
300VII - CONSUMABLES - TRAUMAANATOMICAL LOCKING PLATES (TITANIUM): Costing hasto be given per unit i.e.Plate plus screws. For example, in a 4 holed plate includes 2 cancellous screws and 4 diaphyseal screws.Screws to be provided at the time of surgery. Screw sizes will be determined during surgery. Instrumentation to be provided on loaner basis
3013.5 distal radial locking plate right and left 4 to 12 holes (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
3023.5 lateral distal humerous locking plate right and left ( 4,6,8,10,12holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
3033.5 medial distal humerous locking plate right and left (4,6,8,10,12holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
3043.5mm LATERAL DISTAL TIBIAL LOCKING PLATE Right & left (6, 8, 10, 12,14,16,18 holes)(TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
3053.5mm MEDIAL DISTAL TIBIAL LOCKING PLATE Right & Left (6, 8, 10, 12 ,14,16,18 holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
306Calcaneal locking plate Right & Left ( ANATOMICAL) 3.5 mm (TITANIUM) 1 unit consists of 1 plate and 8 locking screws.
307DISTAL FEMORAL LOCKING PLATE AND SCREWS(TITANIUM) - RIGHT & LEFT (4 Holes to 12 holes)1 UNIT CONSISTS OF i) PLATE-1 No.,(left or right) ii) 6.5\"/7 MM LOCKING SCREWS- At least 5 Nos. FOR PLATE HEAD, iii) 4.5\"/5 MM LOCKING CORTICAL SCREWS - at least 5 NOS. FOR PLATE SHAFT iv) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLESAND v) SHAFT SHOULD HAVECOMBI HOLES . Aiming block should be provided along with appropriate instrumentation
308LCP- Posterior medial proximal Tibial Plates 3.5 (Rt and Lt) , Titanium, 2,4,6,Holes(quote for entire Assemblywith screws)
309LCP Proximal Lateral Tibia Plates 4.5/5 (Rt and Lt), 5,7,9,11,13 Holes(quote for entireAssemblywith screws) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
310MEDIAL DISTAL FEMUR LOCKING PLATES 3 to 9holed.(TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
311PROXIMAL FEMORAL LOCKING PLATE AND SCREWS (TITANIUM) - RIGHT & LEFT (4 Holes to 12 holes) 1 UNIT CONSISTS OFI) PLATE-1 No., (left or right)ii) 6.5\"/7 MM & 4.5\"/5 MM LOCKING SCREWS - 5 Nos. FOR PLATE HEAD,iii) 4.5\"/5 MM LOCKING CORTICAL SCREWS - at least 5 NOS. FOR PLATE SHAFTiv) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES ANDv) SHAFT SHOULD HAVE COMBI HOLES. Aiming block should be provided along with appropriate instrumentation
312PROXIMAL HUMEROUS LOCKING PLATE (TITANIUM) Right &Left from 4 holes to 10 holes 1 UNIT CONSISTS OFI) PLATE-1 No.,II) 3.5/4 MM LOCKING SCREWS- 6 Nos. FOR PLATE HEAD,III) 3.5/4 MM CORTICAL/Locking SCREWS - 4 NOS. FOR PLATE SHAFTIV) PLATE HEAD SHOULD HAVE AT LEAST SIX LOCKING SCREW HOLES ANDV) SHAFT SHOULD HAVE COMBI HOLES. Aiming block should be provided along with appropriate instrumentation
313PROXIMAL MEDIAL LOCKING TIBIAL PLATE (TITANIUM) right & left ( 4,6,8,10 Holes) 1 UNIT CONSISTS OFi) PLATE-1 No.,ii) 3.5/4 MM LOCKING SCREWS-3 Nos. FOR PLATE HEAD,iii) 3.5/4 MM CORTICAL/Locking SCREWS -4NOS. FOR PLATE SHAFTiv) PLATE HEAD SHOULD HAVE AT LEAST THREE LOCKING SCREW HOLES ANDv) SHAFT SHOULD HAVE COMBI HOLES .
314VIII - CONSUMABLES - SCREWS
3156.5/7 mm partially threaded/fully threaded cannulated cancellous Screwsi) Should be made of surgical grade titaniumii) Screws should be supplied with equal number of compatible washers.iii) The complete set of necessary instruments required for screwinsertion (including compatible threaded guide wires (10 no’s) should be supplied on loaner basisiv) Sizes required in increments of 5 mm:75 mm to 95 mm - 10 each (50), 100 mm to 120 mm - 15 each (75),125mm to 135 mm - 5 each (15)
316SCREWS, 7MM CANNULATED CANCELLOUS, 16MMTHREADED, sizes 40mm to 85mm
317SCREWS, 7MM CANNULATED CANCELLOUS, 16MMTHREADED, sizes 110 mm to 140mm
318SCREWS, 7MM CANNULATED CANCELLOUS, 32 MMTHREADED, sizes 60mm to 75mm
319SCREWS, 7MM CANNULATED CANCELLOUS, FULLYTHREADED, sizes 30mm to 120mm
320SCREWS CORTICAL SELF TAPING , 1.5 mm ,sizes 10mm to20mm
321SCREWS CORTICAL SELF TAPING , 2mm , sizes 10mm to 20mm
322SCREWS, 3.5mm CORTICAL SELF TAPING sizes 12mm to 120mm
323SCREWS, 2.4 MM HEADLESS COMPRESSION, sizes 12mm to 30mm (TITANIUM) INSTRUMENTATION SHOULD BE PROVIDED ON LOANER BASIS
324washer for cannulated cancellous screws for 6.5mm and 4mm
325herbert screws 4.5- 5.5mm sizes (30-70mm)
326IX - CONSUMABLES - PLATES
327LCP DHS PLATE TITANIUM The implants should be available with long barrel (38mm) and short barrel length of (25mm).The DHS barrel plate should be available in the following CCD angles: 130°, 135°, 140° 145°and 150°The DHS barrel plate should be available in 4-6 holes12.5 MM DHS blade/screw is required in 65-120 mm increments1 UNIT CONSISTS OF i) DHS blade/screw - 1 nos ii) DHS PLATE - 1 nos iii) 5.0 mm locking screw- 2 nos, 4.5 mm cortex screw- 2 nos
3282.7/3.5 MM DISTAL ANTEROMEDIAL TIBIA LCP (TITANIUM ) 4-10 HOLES. Plate head should have at laest 8 locking holes.1 unit consists of 1 plate and locking screws for all the available holes.
329Variable angle LCP condylar plate for distal femur(plate with screw) (all sizes both sides) TITANIUM 6- 18holes, LCP combi-holes in the shaft. 1 UNIT CONSISTS OF i) plate - 1, ii) 5.0 mm variable angle cannulated locking screws -.5 nos, 5.0 mm variable angle locking screws -.4 nos, The VA Periprosthetic Locking Screws 5.0 mm-3 nos,4.5 cortex screw-4 nos.The system should have Aiming Arm for Variable angle-LCP Condylar Plate 4.5/5.0 for MIPO technique.Conical THREADED DRILL SLEEVE to angulate the drill bits in 15- 30 degrees, Torque limiting SCREW DRIVER, AIMING DEVICE for MIPO SHOULD BE PROVIDEDON LOANER BASIS
330Variable angle LCP Tibial plate for proximal Tibia (plate with screw) (all sizes both sides) TITANIUM 4 - 14 holes LCP combi-holes in the shaft. 1 UNIT CONSISTS OF i) plate -1, ii) 3.5 mm variable angle locking screws -.7 nos,3.5 cortex screw-3 nos. The system should have Aiming Arm for Variable angle-LCP proximal lateral tibial Plate 3.5 mm for MIPO technique.Conical THREADED DRILL SLEEVE to angulate the drill bits in 15 degrees, Torque limiting SCREW DRIVER, AIMING DEVICE for MIPO SHOULD BE PROVIDED ON LOANER BASIS
331DHS TROCHANTERIC STABILISATION PLATE Used to stabilizethe greater trochanter and lateral wall and it is used as a modular extension of the Dynamic hip screw system. SHOULD BE COMPATIBLE WITH ALL STANDARD DHS
3322.4 MM DISTAL RADIUS VARIABLE ANGLE VOLAR LOCKING PLATE TITANIUMUNIT: 1 UNIT CONSISTS OF PLATE-1 No., 2.4 MM VARIABLE ANGLE LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 2.4 MM LOCKING CORTICAL SCREWS- 3 NOS. FOR PLATE SHAFTii) PLATE HEAD SHOULD HAVE ATLEAST EIGHT LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES (3Holes-12holes)
3332.4\"/2.7\"/3.5 MM PROXIMAL ULNA LOCKING PLATE TITANIUMi) UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 2.4\"/2.7 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFTii) PLATE HEAD SHOULD HAVE ATLEAST FOUR LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES. REQUIRED SIZES (3H-5NO, 4H-5NO, 5H-2 NO)
3342.4\"/3.5 MM LATERAL END CLAVICLE LOCKING PLATE (TITANIUM) Right and left UNIT: 1 UNIT CONSISTS OF PLATE- 1 No., 2.4 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFTii) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES
3352.7MM CALCANEALLOCKING PLATE (TITANIUM) - Right andleft 1 unit consists of 1 plate , 8 locking screws
3363.5 MM LATERAL PROXIMAL TIBIAL LOCKING LCP TITANIUM i) UNIT: 1 UNIT CONSISTS OF PLATE-1 No.,3.5\"/4 MM LOCKING SCREWS- 5 Nos. FOR PLATE HEAD, 3.5\"/4 MM LOCKING CORTICAL SCREWS - 4 NOS. FOR PLATE SHAFTiii)PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLESAND SHAFT SHOULD HAVE COMBI HOLESiii) SUPPLIER SHOULD SUPPLY THE COMPLETE SET OF INSTRUMENTS INCLUDING DRILL BIT, TAP, DEPTH GAUGE, THREADED DRILL SLEEVE, SCREW DRIVER, AIMING DEVICE\"/GUIDING BLOCK ON LOANER BASIS TILL STOCKS LAST iv)INVENTORY WITH ALL SCREW SIZES SHOULD BE MAINTAINED IN JIPMERv) SUPPLIER SHOULD BE READY TO EXCHANGE UNUSED PLATES FOR REQUIRED SIZESLEFT:3H-8no, 4H-10no, 6H-12no, 8H-5no,10H-5no RIGHT: 3H-8no, 4H-10no, 6H-12no, 8H-5no, 10H-5no
3373.5 mm precontouredacetabular reconstruction plate 6 to 20holes (right and left) with screws
3383.5 T BUTTRESS PLATE 3 to 4 holes
3393.5 T oblique plate right & left 3 to 10 holes
340DISTAL HUMERUS EXTRA ARTICULAR ANATOMICALLOCKING PLATE& screw assemblyTITANIUM(i) UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 3.5 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFT(ii) PLATE HEAD SHOULD BE ANATOMICAL TO POSTERIOR CONTOUR OF LATERAL CONDYLE, ATLEAST FIVE LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES(iii) SUPPLIER SHOULD SUPPLY THE COMPLETE SET OF INSTRUMENTS INCLUDING DRILL BIT, TAP, DEPTH GAUGE, THREADED DRILL SLEEVE, SCREW DRIVER, AIMING DEVICE\"/GUIDING BLOCK ON LOANER BASIS TILL STOCKS LAST(iv) DISTAL HUMERUS EXTRA ARTICULAR ANATOMICAL LOCKING PLATE LEFT: (4H - 5NO, 5H - 5NO, 6H- 5NO, RIGHT: 4H - 5NO, 5H - 5NO, 6H- 5NO)
341Locking Plate with screw construct for fixation of high tibial osteotomy (TITANIUM)- Head should have at least 3 holes (all sizes) 1 unit consists of 1 plate and locking screws for all the available holes.
342Mini fragment plates 3 to 5 holes with screws, with screw driver , drill bit
343Plate, 3.5MM Pubic symphysis 4 to 6 holes with screws
344PLATE, 4.5 DCP, 6 TO 12 HOLES
345Plate, low profile reconstruction straight plate 3.5mm for acetabulum 6 to 20 holes with screws
3463.5mm quadrilateral plate system for acetabular fracture
3473.5mm intrapelvic acetabular system with plate and screws
348Proximal radius locking plate with screw construct for radical head (2.4mm)
349Proximal radius locking plate with screw construct for radical neck (2.4/2.7mm) TITANIUM1 unit consists of 1 plate and locking screws for all the available holes.
350Spring plates 3.5mm 3 to 4 holes with screws
351PFN WITH HELICAL BLADE (TITANIUM)1. RANGE : Proximal Femoral nails from 9 mm dia to 12 mm dia length 170 mm to 340 mm 2. UNITS: Each Proximal Femoral nail unit consist of (i)Proximal Femoral nail - 1 No ( 9 mm dia to 12mm dia length 170 mm to 340 mm) (ii) PFN BLADE - 1No.( 75mm - 120mm )(iii) 4.9 mm locking bolt x 2
352Titanium mount block for wire \"/ cable.should be compatible with 4.5mm locking plates. should have 5mm threads
353Fumeral Neck System - 1 Unit consisting of Bolt (10mm), Anti-rotation Screw (6.4mm), Locking Screw (5mm), 130 degree one holed plate with instrumentation on lonar basis
354Perimeter Calcaneal locking plate Right & Left ( ANATOMICAL) 3.5 mm or 2.7 mm (TITANIUM) 1 unit consists of 1 plate and 8 locking screws.
355X - CONSUMABLES - NAILS
356TITANIUM ELASTIC NAIL, 2.5 x 44
357TITANIUM ELASTIC NAIL, 3 x 44
358TITANIUM ELASTIC NAIL, 3.5 x 44
359TITANIUM ELASTIC NAIL, 4 x 44
360TITANIUM ELASTIC NAIL, 4.5 x 44
361Reconstruction femoral nail1. Should be made of surgical grade stainless steel or titanium2. Nail should be compatible with antegrade piriform fossa entry3. Proximal nail should have options for recon bolts, descending trochanteric bolts and lateral to medial standard interlocking bolt (2 each)4. Distal nail should atleast two locking holes5. The complete set of instrumentation required for nail and locking bolt insertion should be supplied on loaner basis6. One nail along with all the requisite bolts will be considered as one unit7. Sizes required: 9mm x 38, 40, 42 - 4 units each10mm x 38,40,42- 8 units each11mm x 38,40,42 - 8 units each
362RETROGRADE FEMORAL NAIL (Left and right) TITANIUM . Eachunit consists of1 nail (both short/long), spiral blade/ screw-1 nos,5.0 mm locking screw-3 nos
363INTRAMEDULARY NAIL, INTER LOCKINGFEMUR (TITANIUM)1. RANGE : FEMUR interlocking nails from 9 mm dia to 13 mm dia length 32 to 42 mm2. UNITS: Each linterlocking nail unit consist of(i)interlocking nail - 1 No(ii) interlock bolts x 4
364Tibial nail for Metaphysial with Diphysial fractures.(TITANIUM)Proximal part of nail should have 5 locking options, 3 oblique and 2 medio- lateral.Distal part of nail should have 4 locking option in multiple directions (assorted sizes) 1 unit includes 1 nail with 3 proximal screws and 2 distal screws
365PFN NAIL LONG -(TITANIUM)1. RANGE : Proximal Femoral nails from 9 mm dia to 11 mm dia length 300 mm to 440 mm2. UNITS: Each Proximal Femoral nail unit consist of(i) Proximal Femoral nail - 1 No ( 9 mm dia to 11 mm dia length 300 mm to 440 mm)(ii) 8 mm cannulated locking bolt ( 65-110) x 1 6 mm cannulated locking bolt ( 65-110) x 14.9 mm locking bolt x 2
366INTRAMEDULARY NAIL, INTER LOCKINGTIBIA (TITANIUM)1. RANGE : Tibial interlocking nails from 7 mm dia to 10 mm dia length 28 mm to 34 mm2. UNITS: Each tibial interlocking nail unit consist of(i) Tibial interlocking nail - 1 No(ii) 3.9 \"/ 4.9 interlock bolts x 4
367TIBIO CALCANEAL (HINDFOOT) FUSION NAIL: TITANIUM1.RANGE : Nails from 9 mm dia to 13 mm dia length 20 mm to 34 mm2. UNITS: Eachunit consist of(i) TIBIOCALCANEAL nail - 1 No (9 mm dia to 13 mm dia length 20 mm to 34 mm)(ii) 5 mm and 6mm locking screws x 5Nosalong with ONE 12.5mm Spiral blade(45-100mm)corresponding to the case
368Enders nail system with nails 2-5mm in diameter and length 240-400mm
369Adolescent nailing system with nails and bolts 8-10mm in diameter and length 240-400mm
370Straight Titanium Proximal Humeral Nail - 1 Unit consisting of Nail 1 No., 4.5mm blunt locking screw with suture hole - 3 Nos., 3.5mm Locking Screw - 2 Nos., 4mm Locking Screw - 2 Nos. with instrumentation on lonar basis
371XI - CONSUMABLES - MISCELLEANOUS
372BONE BIOPSY NEEDLE SET
373Saw blades 5mm to 14 mm compatible with CONMED
374Burr, Round fluted 6 mm to 12mm
375DISPOSABLE DIATHERMY CABLES -MONOPOLAR ADULT
376Cement nozzles with Gun on lonar basis
377ARTHROSCOPY DRAPE SET (Sterile) (with Foot Cover, sterile drape for camera cable and cling drape).
378laminectomy Drapes
379Sterile Disposable drapes for 2D C-arm (three pieces) with poly strapes- long size
380THR DRAPE disposable made of material 68-77 gsm spun lace fabric water repellent, length 200cm, width 160cm, consists of headsheet (1x1.5m), adhesive strip (4cmx1.5m), two packets (12x35cm), two tube & cable holder workpad (30x50cm), U-sheet(1.75x1.5m). U-cut(70x15cm), straight 24 cm round, two absorbent workpad (50x10cms) & Polysheet lining (1x1.25m)
381Transparent Drapes with Adhesive edges (size - 65x40cms) betadine coated
382WOUND DRESSING STERILEincision size 15x7.5cm
383WOUND DRESSING STERILEincision size 20x10cm
384WOUND DRESSING STERILEincision size 30x10cm
385WOUND DRESSING STERILE IMPERVIOUS SILVERIMPREGNATEDincision size 20X 10 CM
386WOUND DRESSING STERILE IMPERVIOUS SILVERIMPREGNATED STERILE incision size 30X10 CM
387Soft Roll Cotton Pad - 7.5 cms
388Soft Roll Cotton Pad - 10 cms
389Soft Roll Cotton Pad - 15 cms
390Corkscrew electrode set spiral needle 0.6 mm with tip cable 1.5 m with1.5 mm touchproof male connector DIN42802 sterile sets with each 6 electrodes red, green, yellow, blue, black and white, ETO sterilised, packed individually, single use
391SDN electrode Trigon GN 20\"/1500, stainless steel1.5 mm touchproof connector,1 electrode green (Ground), needle length 20 mm, diameter 0.45 mm, cable length 1500 mm,single use, ETO sterilised
392SDN electrodes Trigon 15\"/2000, stainless steel1.5 mm touchproof connector, pair of electrodes red\"/black, red\"/white, blue\"/black, blue\"/white, yellow\"/black, yellow\"/white, violet\"/black, violet\"/white, grey\"/black, grey\"/white, needle length 15 mm,diameter0.45 mm, cable length 2000 mm, single use, ETO sterilised
393SDN electrodes Trigon 20\"/2000, stainless steel1.5 mm touchproof connector, pair of electrodes red\"/black, red\"/white, blue\"/black, blue\"/white, yellow\"/black, yellow\"/white, violet\"/black, violet\"/white, grey\"/black, grey\"/white, needle length 20 mm,diameter0.45 mm, cable length 2000 mm, single use, ETO sterilised
394Surface adhesive electrode with push-button,with gel, dimensions: 48 x 38 mm, delivered non-sterile, single use only
395Fully Synthetic Beta-tricalcium Phosphate Fully Resorbable granules of average Particle size 2mm - 5cc
396Artificial dural graft Non-biological \"/ synthetic, biocompatible, implantable . Sewable to normal dura. Should be impervious to fluid. For permanent implant. Should lead to minimal adhesion formation And tissue reaction. Expanded polytetrafluoroethylene (ePTFE) preferred.
39710% POVIDINE IODINE 100ML BOTTLES
398PULSE LAVAGE
399TPS OIL LUBRICANT
400Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphatein 50:50 ratio and with ZPC in a kit - 5cc
401Injectable FullyResorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPCin a dual syrige mixing system - 2.5cc
402NEUROSURGERY PATTIES
403Synthetic High Purity Implant Grade Calcium Sulphate Pre-formed Pellets of size 3mm and 4.8mm - 5cc
404Synthetic Recrystallised Hemihydrate Calcium Sulphate Kitto Prepare Antibiotic Impregnated Resorbable Pellets for delivery of antibiotics locally - 5cc
405FIBER GLASS SYNTHETIC PLASTER CAST KIT CONSISTINGOF Soft cotton roll, gloves and fibrecast 7.5mm to 12.5 mm
406DISPOSABLE DIATHERMY PATIENT PLATEPAED
407DISPOSABLE DIATHERMY PATIENT PLATE ADULT
408Stimulation probe 85mm monopolar, straight, ball tip1.5 mm touchproof connector, straight shaft, ball diameter 2.3mm, working length 85mm, with neutral SDN electrode black, cable length 3000mm, single use, ETO sterilised
409Fully Resorbable Synthetic Bone Graft Substitute Mouldable Putty of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio with ZPC -10cc
410RUST REMOVER
411GIGLY SAW
412DISPOSABLE SUCTION TUBES WITH SUCTION TIP
413Nitinol k wire size 1, 1.5, 1.8 & 2mm
414Radiofrequency ablator single and multiple prongs- 15 in each (compatible with serfas)
415Fibrin Sealant\"/Glue for use in ortho-surgery to prevent CSF leak based on fibrin coagulum formed on mixing fibrinogen and thrombin components in easy to apply chamber and nozzle system. Dual tip syringe system and vials with sterile water for reconstitution should be part of the package. Total quantity should be at least 1 ml after generation of fibrin. Warming and stirring device should be made available in OT or on demand within 24 hours. Components, if derived from pooled or single donor human blood should be free from all known pathogens. (Any agitating device required to mix the glue shouldbe provided during use and kept in Ortho OT)
416Stapler remover - Stainless Steel - Reusable
417Acepto syringe
418Hemostatic Dressing for external application , 4 ply non-woven gauze, Size 4x4 inches, impregnated with a natural inorganic mineralwithX- ray detectable strip.
419Soft roll for CTEV clinic 6inches
420Patient pre-operative skin preparation Solution 10.5 ml in sterile applicator container for single use with 2% CHG and 70% IPA.
421STERILE SURGICAL TOURNIQUET ( All in one exsanguination sterile tourniquet) - sizes 14 - 85cms (small, medium, large, extra large)
422XII - NON CONSUMABLE - GENERAL INSTRUMENTS
423Lead apron normal - consists of frontal overlap, velcro panels, adjustable elastic belt for reduced back & shoulder stress & side slits.
424Lead apron zero lead - consists of frontal overlap, velcro panels, adjustable elastic belt for reduced back & shoulder stress & side slits.
425A reusable suture cutter open ended with 4.2mm shaft diameter left opening and total length of 13cm for arthroscopic suture cutting
426A Knot pusher closed end with modified blue handle in order provide ergonomic feel and distal edges should be smooth to avoid suture cutting in rotator cuff repair
427A metal reusable instrument with 3.4 mm shaft diameter straight shaft and approximately 16cm in length for arthroscopic suture retrieval
428Arthroscopic Hook scissors 20 -30 degree left
429Arthroscopic Hook scissors 20- 30 degree right
430Arthroscopic Hook scissors straight
431Arthroscopic Knee Curettes with handle:
432Curette, small, oval, curved 10 degree upwards, working length more than 12cm
433Curette, medium, oval, curved 10 degree upwards, working length more than 12cm
434Curette, large, oval, curved 10 degree upwards, working length more than 12cm
435Bending tool
436Cannula to access posterior horn
437Double lumen cannula curved left
438Double lumen cannula curved right
439Double lumen cannula curved up left
440Double lumen cannula curved up right
441Double lumen cannula straight
442Metal mallet with plastic head , length 22.5cm
443Notch chisel with handle curved 15 degrees downwards , working length more than 12 cm , round tip,with markings for depth measurement
444Osteotome. Thin, flat tip, 10mm width for harvesting bone patella tendon graft
445Osteotome. Thin, flat tip, 8mm width for harvesting bone patella tendon graft
446Rasp , narrow, curved, working length more than 12 cm
447Rasp , narrow, straight, working length more than12cm
448Reusable inside out meniscal repair set
449PLATE BENDER
450Ilizarov wire cutter
451KWIRE CUTTERS
452ROD CUTTERS
453WIRE CUTTER CUM BENDER
454METAL BONE BIOPSY NEEDLE SET - OUTER SLEEVE CANNULATED 5 MM
455CEMENT MIXING BOWL WITH SPATULA
456Centrifuge for PRP and BMA concentrate, table top automated with brushless induction motor 6000 RPM, weight 5 kg with 24 tubes of 15 ml
457HOKE CHISEL
458Debakey bull dog clamps vascular size - 25, 30, 45mm
459DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP ANGLED 50°, JAW 10MM AND 52MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
460DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP ANGLED 50°, JAW 14MM AND 54MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
461DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP STRAIGHT, JAW 12MM AND 53MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
462DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP STRAIGHT, JAW 15MM AND 56MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
463Multifunctional A3 copier\"/printer, duplex, LAN, RADF, Scan to folder, 20CPM
464Cuff arm for tourniquet compatible with VBM m/c size - adult
465Cuff thigh for tourniquet compatible with VBM m/c size - adult
466Cuff tourniquet compatible with VBM m/c size - paed
467VOLKMAN CURETTE 220 MM (SIZE 3 MM) OVAL CUP - SHARP EDGED
468Volkmans curettee backward angled 2\" to 4\"
469Volkmans curettee forward angled 2\" to 4\"
470SUPERFINE VESSEL DILATOR 13,5CM, STRAIGHT FLAT HANDLE 9MM, TIPS 4X0,3MM. MUST HAVE A HIGHLY POLISHEDAREA IN THE WORKING SURFACE TO AVOID INTERLUMINAL INJURY IN THE VESSEL
471ELEVATOR DISECTOR DOUBLE ENDED
472FINE DISECTOR REINFIELD
473FREER DOUBLE ENDED DISSECTOR, WITH SHARP AND BLUNT ENDS 190MM
474KILLIAN DOUBLE ENDED DISSECTOR WITH SHARP AND BLUNT ENDS 180MM
475McDONALD DOUBLE ENDED DISSECTOR, 190MM
476MICRO DISSECTOR FLAT\"\"/CURVED
477Penfield Dura Dissector, Double Ended, curved, 290mm
478Penfield Dura Dissector, Double Ended, One side Wax Packer and one side Dissector curved, 190mm
479Tungsten Carbide Metzenbaum-Aquila-Fino Dissect.Sc curved, bl\"\"/ round, TC, SC, golden scres 18cm
480Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.18cm curved, bl\"\"/bl, black
481Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.20cm curved, bl\"\"/bl, black
482Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.25cm curved, bl\"\"/bl, black
483Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.28cm curved, bl\"\"/bl, black
484Tungsten Carbide Metzenbaum-Dissec.18cm,cvd., black coated
485Tungsten Carbide Metzenbaum-Dissec.20cm,cvd., black coated
486Tungsten Carbide Metzenbaum-Dissec.23cm,cvd., black coated
487Tungsten Carbide Metzenbaum-Dissect.Scis.20cm,cvd. Titan Nitrite coated-copper
488Tungsten Carbide Metzenbaum-Dissect.Scis.23cm,cvd. Titan Nitrite coated-copper
489Tungsten Carbide Metzenbaum-Dissect.Scis.23cm,str. black coated, golden rings
490Tungsten Carbide Metzenbaum-Dissect.Scis.26cm,cvd. black coated
491Tungsten Carbide Metzenbaum-Dissect.Scis.26cm,str. black coated
492Tungsten Carbide Metzenbaum-Dissect.Scis.30cm,cvd. Titan Nitrite coated-copper
493Tungsten Carbide Metzenbaum-Dissect.Scis.30cm,str. black coated
494Tungsten Carbide Metzenbaum-Dissecting.Scissors
495WATSON-CHEYNE DOUBLE END DISSECTOR, 13CM
496Hinterman K-wire distractor / retractor - small, large
497Hand held doppler machine portable with pointed 8mhz prob for bedside evaluation of blood flow status
498Battery operated Power drill (with batteries - 2 Nos + Charger-1 No)
499HAND DRILL JACOB CHUCK WITH KEY
500LONG CANNULATED SCREW DRIVER
501SCREW DRIVERS 3.5 MM : LENGTH 200 MM NON CANNULATED
502SCREW DRIVERS 3.5 MM : LENGTH 250 MM NON CANNULATED
503SCREW DRIVERS 4.5 MM : LENGTH 250 MM NON CANNULATED
504Cobbs spinal elevator straight & angled
505PERIOSTEAL ELEVATOR
506Bone file s/s compatible with power reamer attachment
507FIBRE OPTIC CABLE WITH ADOPTER LENGTH 8.5 FEET OR 260cm(COMPATIBLE WITH KARL STORZ LIGHT SOURCE)
5088\" FERRIS SMITH FORCEPS
509ALLIES TISSUE FORCEPS 150MM
510DEBAKEY DISSECTING FORCEPS WITH TUNGSTEN CARBIDE TIP, ROUND HANDLE,MUST BE USEFUL FOR NEEDLE PULLING OF 5 \"0\" AND 6 \"0\" SUTURE NEEDLES. 15CM LENGTH AND 2MM JAW.
511DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 5\"
512DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 7\"
513DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 8\"
514Forceps MOSQUITO CURVED ARTERIES CURVED SERRATED JAW 5\"
515Forceps SPENCERWELL CD ARTERIES
516HUDSON NONTOOTHED forceps
517HUDSON TOOTHED FORCEPS 170MM
518LEKSELL Rongeur
519MICRO-NECRO FORCEPS WITH DEBAKEY AUTRAMATIC JAW, ROUND HANDLE, 15CM TOTAL LANGTH AND 1.2MM JAW.
520RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE,WITH TYING PLATFORM 6X0.7MM, STRAIGHT JAW WITH DIAMOND DUST
521RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE, DIAMAND COATED RING JAWS 2X1MM,WITH GUIDE PIN
522RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE, DIAMAND DUST RING JAWS 1X.5MM,WITH GUIDE PIN
523Ruskin-Liston Bone Cutting Forceps, Length 18cm, Straight, Ceramic Black Coated - Bite size 3, 4, 5 ,6 mm
524Ruskin-Liston Bone Cutting Forceps, Length 18cm, Curved, Ceramic Black Coated - Bite size 3, 4, 5 ,6 mm
525SILVER NON-STICK bipolar forceps with European Style Flat Pin Width of tips sizes from 0.3mm to 2.0mm, length 150mm to 220mm
526SILVER NON-STICK bipolar forceps with European Style Flat Pin with Round Handle with Golf Ball Finish Width of tips from 0.3mm to 2.0mm, length 150mm to 220mm
527Standard Dissection forceps - Plain tip,2mm tip - 110 to 130 mm long
528Standard Dissection forceps - Plain tip, 3mm tip - 140to 160mm long
529Standard Dissection forceps - Plain tip, 4mm tip -180mm long
530Standard Dissection forceps - Plain tip, 4mm tip -230mm long
531Standard Dissection forceps - Plain tip, 4mm tip -305mm long
532Standard Dissection forceps - toothedtip,3 mm tip -230mm long
533Standard Dissection forceps - toothedtip,4mm tip -305mm long
534Standard Dissection forceps - toothedtip, 2.5 mm tip - 140to 160mm long
535Standard Dissection forceps - toothedtip, 2mm tip - 110 to 130 mm long
536Standard Dissection forceps - toothedtip, 3 mm tip -205 mm long
537TILLY\"S FORCEPS
538DEPTH GAUGE Big 3.5 MM , LENGTH 250
539DEPTH GAUGE Medium 3.5 MM , LENGTH 200
540DEPTH GAUGE Medium 4.5 MM , LENGTH 200
541DEPTH GAUGE Small 3.5 MM , LENGTH 150
542DEPTH GAUGE Small 4.5 MM , LENGTH 150
543BONE GRAFT PUNCHES LARGE 254 MM, HEAD DIA 12X18MM STRAIGHT & ANGLED
544BONE GRAFT PUNCHES SMALL 254 MM, HEAD DIA 9X15MM STRAIGHT & ANGLED
545Guide wire aiming and repositioning device1.should allow 5 degree angulation and 5 mm offset insertion2. Should accommodate guide wires upto 3.2 mm
546SPRING HANDLE MICRO SCISSOR CURVED JAW, TOTAL LENGTH 14,5CM,ROUND HANDLE
547SPRING HANDLE MICRO SCISSOR STRAIGHT JAW, TOTAL LENGTH 14,5CM,ROUND HANDLE
548T handle for shanz pin insertion with Jacob chuck 140 mm, chuck key
549CURVED NEEDLE HOLDER LARGE
550DeBakey Needle Holder- Tungsten cardbide tip - withstraight jaws for suture size5-0 Ring handle, - with ratchet240-250 mm long
551DeBakey Needle Holder - Tungsten cardbide tip - with straight jaws for suture size 2-0, 3-0 & 4-0 Ring handle, - with ratchet 150-180mm long
552DeBakey Needle Holder Tungsten cardbide Tip - with straight jaws for suture size 2-0, 3-0 & 4-0 Ring handle, - with ratchet 200-220mm long
553Hegarvascular needle holder - with Tungsten cardbide edges- 1 mm wide Ring handle, - with ratchet (Size 1: 140 mm long)
554Hegarvascular needle holder - with Tungsten cardbide edges- 1 mm wide Ring handle, - with ratchet (Size 2:185 mm long)
555Hegarvascular needle holder - with Tungsten cardbide edges- 1 mm wide Ring handle, - with ratchet (Size 3:205 mm long)
556Hegarvascular needle holder - with Tungsten cardbide edges- 1 mm wide Ring handle, - with ratchet (Size 4:230mm long)
557MAYO NEEDLE HOLDER STRAIGHT WIDE CROSS SERRATED JAWS 7\"
558MICRO-NEEDLE HOLDER ROUND HANDLE, WITH RATCHET, TOTAL LENGTH 15CM, HANDLE Ø8MM, STRAIGHT JAW , JAWS11X1.5MM, DIAMOND DUST JAWS, STREAMLINED. SHOULD ACCOMMODATE 6\"0\" SUTURE NEEDLE.
559MICRO-NEEDLE HOLDER ROUND HANDLE, WITH RATCHET, TOTAL LENGTH 15CM, HANDLE Ø8MM, STRAIGHT JAW , JAWS11X2MM, DIAMOND DUST JAWS, STREAMLINED. SHOULD ACCOMMODATE 5\"0\" SUTURE NEEDLE.
560STRAIGHT NEEDLE HOLDER SMALL, MED, LARGE
561Tungsten Carbide Crile-Wood Needle Holder 15cm
562Tungsten Carbide Crile-Wood Needle Holder 15cm black coated
563Tungsten Carbide Crile-Wood Needle Holder 18cm
564Tungsten Carbide Crile-Wood Needle Holder 20cm
565Tungsten Carbide Crile-Wood Needle Holder 22cm
566Tungsten Carbide Crile-Wood Needle Holder 23cm
567Tungsten Carbide Mayo-Hegar Needle Holder 14cm
568Tungsten Carbide Mayo-Hegar Needle Holder 16cm
569Tungsten Carbide Mayo-Hegar Needle Holder 18cm
570Tungsten Carbide Mayo-Hegar Needle Holder 18cm black coated
571Tungsten Carbide Mayo-Hegar Needle Holder 20cm
572Tungsten Carbide Mayo-Hegar Needle Holder 24cm
573Tungsten Carbide Mayo-Hegar Needle Holder 26cm
574Tungsten Carbide Micro-Vascular Needle Holder 14cm
575Tungsten Carbide Micro-Vascular Needle Holder 18cm
576Tungsten Carbide Micro-Vascular Needle Holder 20cm
577Tungsten Carbide Micro-Vascular Needle Holder 23cm
578Tungsten Carbide Micro-Vascular Needle Holder 26cm
579BONE HOOK small, med, big
580Love Nerve hook ball tip
581Love nerve hook blunt
582FEMORAL HEAD IMPACTOR nylon faced
583Graft Impactor offset foot 30 degree 4 x 12 mm
584Beyers bone Nibbler 7\" long
585Ruskin mini curved bone nibbler 6\" long
586Nitinol wire
587Detachable handle compatible for Fine osteotome thin slender stem.
588CURVED OSTEOTOME FOR ACETABULUM
589HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 10 MM WIDE STR & CVD
590HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 15 MM WIDE STR & CVD
591HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 20 MM WIDE STR & CVD
592HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 5 MM WIDE STR & CVD
593L Osteotomes for spinal osteotomies
594Femoral head template 42-58mm (Increment of 2 mm)
595Radiolucent pelvic retractor,medium - length 268 mm & large - length 323 mm
596WIREPASSER
597Beath pin drill tip
598Beath pin spade tip
599PLIER FLAT NOSE
600PLIERS HEAVY DUTY
601PLIERS WITH SIDE CUTTERS FOR WIRE UPTO 2.5 MM CHROMIUM PLATED
602Ball tipped Love nerve root probe 1.5 x 4mm tip , 200 mm length
603Ball tipped Love nerve root probe 1.5 x 3mm tip , 200 mm length
604Foraminotomy Punch, downcurved shaft, small handle, 20cm, 2mm bite
605Foraminotomy Punch, down curved shaft, small handle, 20cm, 3mm bite
606Foraminotomy Punch, upcurved shaft, small handle, 20cm, 2mm bite
607Foraminotomy Punch, upcurved shaft, small handle, 20cm, 3mm bite
608Kerrison punch down cutting 2 to 3 mm 45 deg
609Kerrison punch down cutting 2 to 3 mm 90 deg
610Kerrison punch up cutting 1mm to 4mm
611Handle for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish)
612Handle for Rotatable Kerrison Bone punch (Billy or similar) assembly (Black coated)
6132 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
6143 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
6154 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
6165 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
6172 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
6183 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
6194 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
6205 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
621DEPTH GAUGE Big 4.5 MM , LENGTH 250
622BOX WRENCH FOR BOLT
623BOX WRENCH FOR NUT
6244 PRONG RETRACTORS
625ACROMIAL RETRACTOR MEDIUM
626ACROMIAL RETRACTOR SMALL
627ANTERIOR CAPSULAR RETRACTOR
628ANTERIOR GLENOID NECK RETRACTOR
629BLUNT POINT GELPI RETRACTOR
630CHARNLEY INITIAL INCISION RETRACTOR : 308 MM WITH BALL, HOOK AND CHAIN
631DELTOID RETRACTOR
632DELTOID RETRACTOR LARGE
633DELTOID RETRACTORS SMALL
634FINE SUCTION NOZZLES FRAZIER RETRACTOR
635FINE SUCTION NOZZLES MCGUCKINS RETRACTOR
636Gelpi-De Bakey Retractor 15cm
637Gelpi-Loktite Retractor 18cm
638Gelpi-Seletz Retractor 15cm
639Gerdar subacromian retractor
640HAND HELD DELTOID RETRACTOR
641HIGS RETRACTOR
642HINGED GELPI RETRACTOR
643HOHMANN RETRACTOR 10 MM WIDTH, SMALL, SHORT NARROW TIP 220 MM LENGTH
644HOHMANN RETRACTOR 6 MM WIDTH, SMALL, SHORT NARROW TIP 160 MM LENGTH
645HOHMANN RETRACTOR 8 MM WIDTH, SMALL, SHORT NARROW TIP 160 MM LENGTH
646HUMERAL HEAD RETRACTORS
647Jackson-Burrows Retractor 18cm,blunt
648Kolbel self retaining glenoid retractor with cutter blade set
649LANGENBECK RETRACTOR LARGE STRAIGHT
650LANGENBECK RETRACTOR MEDIUM
651MITCHELL RUGINE RETRACTOR FAN SHAPED STRAIGHT SHARP EDGE 210 MM
652MODIFIED FUKUDA RETRACTOR LARGE
653MODIFIED FUKUDA RETRACTOR SMALL
654NERVE ROOT RETRACTOR
655PECTORAL RETRACTOR LARGE
656PECTORAL RETRACTOR SMALL
657Rang retractors - set of 2 for sciatic notch
658RICHARDSON\"S RETRACTOR
659SCOFIELD RETRACTOR
660SELF RETAINING RETRACTOR FRAME (SHOULDER)
661WEITLANDER RETRACTOR
662Bone Nibbler\"\"/Rongeur docuble action fine straight & angled length 190 mm
663Bone Nibbler\"\"/Rongeur docuble action fine straight & angled length 250 mm
664Bone Nibbler\"\"/Rongeur docuble action forward angled length 250 mm
665Bone Nibbler\"\"/Rongeur docuble action straight & angled length 190 mm
666Bone Nibbler\"\"/Rongeur docuble action straight & angled length 250 mm
667Disc Rongeurs (Pitutary disc forceps) angled sizes 1mm to 4mm
668Disc Rongeurs (Pitutary disc forceps) straight sizes 1mm to 4mm
669Echlin Bone Rongeur Forcep 23cm\"\"/2mm to 4mm,straight
670Gruenwald (Cushing) Rongeur 18cm\"\"/2, 3, 4 x10mm, curved down, detachable
671Gruenwald (Cushing) Rongeur 18cm\"\"/2, 3, 4 x10mm, curved up, detachable
672Gruenwald (Cushing) Rongeur 18cm\"\"/2, 3, 4 x10mm, straight, detachable
673Ruskin Bone Rongeur Forcep, Double Action 18cm Length\"\"/Bite Size 4mm to 5mm, Straight,Ceramic Black Coated
674Battery operated Power saw (with batteries - 2 Nos + Charger-1 No)
675MEASURING SCALE - 15 cm
676MEASURING SCALE - 30 cm
677KILNER SCISSORS 5\" STRAIGHT & CURVED
678Mayo Scissors - with tungsten carbide edges - Curved, Large 230 mm long
679Mayo Scissors - with tungsten carbide edges - Curved, Medium170 mm long
680Mayo Scissors - with tungsten carbide edges - Curved, Small145mm long
681Mayo Scissors - with tungsten carbide edges - Straight, Large 230 mm long
682Mayo Scissors - with tungsten carbide edges - Straight, Medium170 mm long
683Mayo Scissors - with tungsten carbide edges - Straight, Small145mm long
684Metzenbaum Scissors -with tungsten carbide edges - Lazy S Curved, 205 mm long
685Metzenbaum Scissors -with tungsten carbide edges - Lazy S Curved, 230 mm long
686Metzenbaum Scissors - with tungsten carbide edges - Curved,115mm long
687Metzenbaum Scissors - with tungsten carbide edges - Curved, 145 mm long
688Metzenbaum Scissors - with tungsten carbide edges - Curved, 180 mm long
689Metzenbaum Scissors - with tungsten carbide edges - Curved, 205 mm long
690Metzenbaum Scissors - with tungsten carbide edges - Curved, 230 mm long
691Metzenbaum Scissors - with tungsten carbide edges - Curved, 260 mm long
692Metzenbaum Scissors - with tungsten carbide edges - Curved, 285 mm long
693Metzenbaum Scissors - with tungsten carbide edges - Curved, 300 mm long
694Metzenbaum Scissors - with tungsten carbide edges - Lazy S Curved, 180 mm long
695Metzenbaum Scissors - with tungsten carbide edges - Straight,300 mm long
696Metzenbaum Scissors - with tungsten carbide edges - Straight, 115mm long
697Metzenbaum Scissors - with tungsten carbide edges - Straight, 145 mm long
698Metzenbaum Scissors - with tungsten carbide edges - Straight, 180 mm long
699Metzenbaum Scissors - with tungsten carbide edges - Straight, 205 mm long
700Metzenbaum Scissors - with tungsten carbide edges - Straight, 230 mm long
701Metzenbaum Scissors - with tungsten carbide edges - Straight, 260 mm long
702Metzenbaum Scissors - with tungsten carbide edges - Straight, 285 mm long
703PLASTER CUTTING SCISSORS
704SCISSORS FOR CUTTING POLY PROPLENE SUTURE MATERIAL AND 1\"0\" SUTUREMATERIAL - ONE SIDE OF THE BLADE WITH SERRATION AND ANOTHER SIDE WITH TUNGESTEN CARBIDE TIP - AVAILABLE LENGTHS: 6\", 7\", 8\"
705SCISSORS METZENBAUM 5\" STRAIGHT & CURVED
706SCISSORS METZENBAUM 7\" STRAIGHT & CURVED
707Tungsten Carbide Mayo Scissor 17cm, straight, black coated, golden handles
708Tungsten Carbide Mayo-Stille Scissor 17cm,curved Titan Nitrite coated-copper
709Charnley scoop long small & medium
710SCOOP DOUBLE ENDED FINE
711Continuous Band sealer machine for packing Instruments and Implants for Plasma sterilization
712HOEN DURA SEPARATOR 15CM/45°
713HOEN DURA SEPARATOR 15CM/90°
714Subscapuler\"s spreader
715Tendon stripper with rotating blade for iliotibial tract
716Suction appratus mobile with disposable/bio-degradable consumable sealed containers
717YANKAUER SUCTION NOZZLE
718WIRE TENSIONER (TBW)
719WIRE TENSIONER DIRECT MEASURE
720Fukushima Suction Tube conical WL 115mm\"\"/ Fr.6 to 8, flexible
721GUIDE WIRE 2MMX40
722GUIDEWIRE 2.5MMX40
723SS WIRE CUTTERS
724COMBINATION WRENCH 10,11
725Triangle support knee positioning large & standard
726XIII - Special quantity items - PAEDIATRIC IMPLANTS
727Micrometric swivelling clamp, OF-Garches, T-clamp, Multiplanar clamp compatible with Paediatric limb reconstruction system (LRS)
728Mini-rail lengthener with articulation for short(upto 32.5mm), standard(upto 57.5mm) & long(upto 135.5mm)
729Mini-rail lengthener without articulation for short(upto 32.5mm), standard(upto 57.5mm) & long(upto 135.5mm)
730Bone screw - with taper thread design, self tapping design - length 150 - 260mm; thread length 30 - 90mm; 6mm shaft diameter
731XIV - NON-CONSUMABLES
732BITE SIZES : 2 TO 5 (upcutting and down cutting detachable tips, 40degrees and 90 degrees)
733Fine osteotome thin slender stem, sizes - 2 to 10mm compatible with detachable handle
734Chisel Blades with handlewidth 10 mm, short, width 10 mm, long, width 16 mm, short, width 16 mm, long, width 25 mm, short, width 25 mm, long, width 5 mm, short, width 5 mm, long
735Curved Chisel Blades with handlewidth 10 mm, width 16 mm, width 25 mm
736Pelvic osteotomes- Straight, angled, short angled bayonet shaped, flag shaped (15 & 20mm width)
737Pelvic osteotomy chisel, curved length 304/134 mm, width 15 & 20mm
738Pelvic osteotomy chisel, curved length 309 mm, width 15 & 20mm
739Radiolucent hohman retractorswidth 8 mm, length 220 mm, width 22 mm, length 250 mm, width35 mm, length 275 mm, width 18 mm, length 240 mm, width 24 mm, length 267 mm
740Radiolucent pelvic retractor (260 mm & 320mm length)
741CANNULATED REAMERS SET WITH T-HANDLE sizes : 6mm to13mm
742Army - Navy retractor - set of 2 Right angled , 8 1/2 inch
743Shoulder positioning (Traction) assembly for shoulder surgery (Lateral decubitus & Beach Chair position)
744Arthroscopic Probe
745Arthroscopic resector cutters 3.5mm compatible with stryker shaver instrumentation
746Arthroscopic resector cutters 5mm compatible with stryker shaver instrumentation
747Arthroscopic aggressive plus cutters 3.5 mm compatible with stryker shaver instrumentation
748Arthroscopic aggressive plus cutters 5 mm compatible with stryker shaver instrumentation
749Arthroscopic tomcat cutters 3.5mm compatible with stryker shaver instrumentation
750Arthroscopic tomcat cutters 5 mm compatible with stryker shaver instrumentation
751Arthroscopic standard 12 flute Round Burr compatible with stryker shaver system
752Arthroscopic standard 6 flute Round Burr compatible with stryker shaver system
753Homann retractor - assorted sizes
754Osteotomes (Unibody design) - straight and curved - assorted sizes
755Biodegradable Calcium sufate granules (Powder and liquid) for antibiotic delivery - 5 cc
756Biodegradable Calcium sufate granules (Powder and liquid) for antibiotic delivery - 10 cc
757Stockinette - Cotton - 100mm (10 Meters roll)
758Stockinette - Cotton - 200mm (10 Meters roll)
759Continuous Band Sealing Machine
760XV - MISCELLANEOUS - PLATES, FOOT & ANKLE IMPLANTS
7612.4/2.7 mm linear smallmetatarsal LCP4- 8 holed
7622.4/2.7 mm metatarsal L oblique LCP 2-6 holed right and left
7632.4/2.7 mm rhomboid shaped cuboid LCPright and left
7642.4/2.7 mm curvilinear talus LCP 6 holed
7652.4/2.7 mm curvilinear LCP with multiple central flanges for naviculum 7 holed
7662.4/2.7 mm Y shaped Metatarsal LCP 3-7 holed
767hindfoot ankle arthrodesis Straight nail with 3 distal locking for calcaneum (3.9/4.9 mm2 lateral to medial and 1 posterior to anterior) and 3 proximal locking options ( with one dynamic locking )
7683.5 mm Rhomboid plate for lisfranc arthrodesis /TN arthrodesis
7693.5 mm calcaneal perimeter plate with locking scew holes along the perimeter of calcaneumand two connecting bars between superior and inferior perimeters
7702, 2.5mm T Plate, L Plate and Straight Plates for talus neck fixation
7712.4/2.7mm Radial Styloid Plate
7722.4/2.7mmDistal Radius Column specific plates , rinm plates , pi plates
7732.4/2.7mm Olecranon locking plate
7743.5mm Mattaplatewith 4 -14 hole, & Quadri lateral Plate Extension . The intrapelvic acetabularplate schould have pelvic brim plate withmedial flange for quadrilatreral plate fixation . It should be insertable through aip approach
7752.7 /2.4mm Distal Ulna Locking Plate
7763.5mm proximal tibia Posteromedial Plate from 4 h to 10 holes
7774.5mm Double angle blade plate. the angle blade plate should have multiple angles, 125-135 and multiple bladelengths 50-100. distal holes 4 TO 12 HOLES .case to case basis the supplier should be able to provide sizes which is needed
7782.7mm Distal Fibula Locking Plate
7793.5mm Medial distal Tibia low profileLocking Plate from 6 holes to 14 holes
7803.5mm Posterior Malleolus Anatonical Plate
781Patella Plates/Basket Plates
7823.5mm anterolateral distal tibia plates of various lengths from 4 holes to 14 holes
7832.4mm/2.7mm 4 Corner Fusion Plate for wrist
7843.5mm proximal lateral tibia plates of various lengths from 4 holes to 14 holes
7853.5mm pubic symphysis plate with 3 holes on eiither side
7864.5mm PROXIMAL TIBIA low profile low bend hockey stickPLATE 4 TO 16 HOLES
78795 degree angle blade plate 4 to 14 holes
788125/13/135 degree single angle blade plate 50 to 100mm blade length .. Plate length 4 tio 12 holes
7893.5mm recon plates 4 holes to 14 holes
790locking recon 3.5mm4 holes to 15 holes
791lcp 4 hole to 14 holes 3.5mmstraight
792semitubular plate 3.5mm locking 4 to 14 hole
793semitubular plate 3.5mm plain4 to 14 hole
794dhs of angles 125 /130 /135 degrees from 4 to 8 holes
795knee arthrodesis nail of lenth 65 to 90 mm
7963.5mm philos plate 2 hole to 10 hole
7973.5mm proximal tibia medial T Plate from 4 h to 10 holes
7983.5mmposterolateral extraarticular humerus anatomical lockingj shaped hiockey stick plate
7992.7mm/3.5mm distal humerus anatomical plates posterolateral(90/90), medial , lateral (parallel configuration )
8002.7/3.5mm scapular lateral border anatomical plates
8013.5mm olecranon hook plates
8022.7mm clavicle anatomical plate
8033.5mm Washer for screws
8047mm Washer for screws
805Steinmann Pin 3.5mm - Length 150mm
806Steinmann Pin 3.5mm - Length 200mm
807Steinmann Pin 4 mm - Length 150mm
808Steinmann Pin 4 mm - Length 200mm
809Steinmann Pin 5 mm - Length 250mm
8103.5mm SS LCP - 6,7,8 holes
8113.5mm SS Re-construction LCP - 6,7,8 holes
8124.5mm Narrow LCP - 8,9,10,11 holes
8134.5mm Broad LCP - 9,10,11 holes
8143.5mm Non-LockingDCP - 7 Holes
8153.5mm Non-LockingLCDCP - 7 Holes
816Adult Conical Schanz Pin 4mm - 30, 40, 50, 60 Threaded
817Adult Conical Schanz Pin 5mm - 30, 40, 50, 60 Threaded
818Adult Conical Schanz Pin 6mm - 30, 40, 50, 60 Threaded
8191.2mm K-WireNon threaded
8202mm K-WireNon threaded
8212.2mm K-WireNon threaded

AI Tender Summary

OUR REF NO 45504146
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 28-10-2024
Authority
Authority Name Jawaharlal Institute Of Post Graduate Medical Education And Research
Work Description Supply Of Consumables And Non-Consumables For The Department Of Orthopaedics , I - Ring Fixation System - The Raw Material Used For Implants Shoud Be Ss 316-L Conforming To Astm F 138-97 Or Iso-5832-1 Certificateconfirming To This From Raw Material Supplier At Billet Level Should Be Submitted. , Half Rings - Dia : 100Mm. , Half Rings - Dia : 120Mm. , Half Rings - Dia : 130Mm. , Half Rings - Dia : 140Mm. , Half Rings - Dia : 150Mm. , Half Rings - Dia : 160Mm. , 5/8 Ring - 160Mm , Threaded Rods , Size : 80 Mm , Size : 100Mm , Size : 120 Mm , Size : 150 Mm , Size : 200 Mm , Size : 250 Mm , Size : 300 Mm , Threaded Rods : Slotted , Size : 60 Mm , Graduated Telescopic Rods - Size 150Mm , Post- Male/Female , Male Size : 3 Holes , Female Size : 3 Holes , Hinges Male Standard , Hinges Male Low Profile. , Hinges Female Standard , Hinges Female Low Profile , Hinges-90 Degree Standard , Hinges-90 Degree Low Profile , Long Connection Plates , Size : 8 Holes, 155 Mm , Connected Plates With Threaded Ends , Size : 7 Holes, Length 175 Mm , Short Conn.Plate 2 Holes Length 35Mm , Short Conn.Plate 3 Holes Length 45Mm , Twisted Plates - Size:3 Holes Length 65Mm , Twisted Plates - Size: 2 Holes Plates , Bayonet Point-Cortical 1.8Mm X 370Mm , Wire Fixation Buckle , Wire Fixation Bolt Cannulated , Wire Fixation Bolt Slotted , Bolt, 6 Size : 10 Mm , Bolt, 6 Size : 16 Mm , Bolt, 6 Size : 30 Mm , Slotted Washers 4.0Mm , Spacing Washers 2.0Mm , Flat Sided Washers 2.0Mm , Flat Sided Washers 4.0Mm , Nut 6Mm , Nylon Insert Nut , Square Nut , Threaded Socket,Size : 20 Mm , Threaded Socket, Size : 30 Mm , Threaded Socket, Size : 40 Mm , Blocks For Half Pins , Size : 1 Holes , Size : 2 Holes , Size : 3 Holes , Size : 4 Holes , Sleeves 6Mm , Set Screws , 90 Deg. Arch,Large Size , 120 Deg.Arch,Large Size , Oblique Support , Olive Wire With Stopper Made Out Of Single Piece , Composite Foot Rings With Carbon Reinforcement Short Arm , Composite Foot Rings With Carbon Reinforcement Long Arm , Ii - The Rail Fixation System: Adult (The Raw Material Used For Implants Shoud Be Ss 316-L Conforming To Astm F 138-97 Or Iso-5832-1 Certificateconfirming To This From Raw Material Supplier At Billet Level Should Be Submitted.) (Instruments) , Trocar , Drill Bits 3.2X200mm , Drill Bits 4.8X200mm , Templates , Forendclampandcentralclamp , Forswivel Clamp , Drill Guides 6X3.2X40 , Drill Guides 6X3.2X80 , Drill Guides 6X5x40 , Drill Guides 6X5x80:8 Nos. , Drill Guides 5X2x43mm , Drill Guides 5X2x83mm , Screw Guide 8X6x60mm , Screw Guide 8X6x100mm , Allenkey 6Mm , Appliances: , Rail - 240Mm Long , Rail - 300Mm Long , Rail - 400Mm Long , Cd Unit , 40 Mm , 80 Mm , Implants - Tapered Pin 6Mm To 5Mm , Length 130Mm Thread Length30mm , Length130mmthreadlength40mm , Length130mmthreadlength50mm , Length150mmthreadlength30mm , Length150mmthreadlength40mm , Length150mmthreadlength50mm , Length170mmthreadlength40mm , Length170mmthreadlength50mm , Length170mmthreadlength60mm , Length200mmthreadlength40mm , Length200mmthreadlength50mm , Length200mmthreadlength60mm , Tapered 6Mm To 5Mm-With Hydroxyapetite Coating For Threads , Length130mmthreadlength30mm , Length130mmthreadlength40mm , Length130mmthreadlength50mm , Length150mmthreadlength30mm , Length150mmthreadlength40mm , Length150mmthreadlength50mm , Length170mmthreadlength40mm , Length170mmthreadlength50mm , Length170mmthreadlength60mm , Length200mmthreadlength40mm , Length200mmthreadlength50mm , Length200mmthreadlength60mm , Container , Container For Rail Fixator System For Appliances , Container For Rail Fixator System For Instruments , Container For Rail Fixator System For Implants , The Rail Fixation System: Pediatric - Appliances , Cd Unit-Pediatric , Rail-Pediatric , 150Mm , 200Mm , 250Mm , Central Clamp-Pediatric , End Clamp-Pediatric , Swivel Clamp-Pediatric , T Clamp Pediatric , Implants:Tapered 4.5Mm To 3.5Mm , Length100mmthreadlength20mm , Length100mmthreadlength30mm , Length120mmthreadlength30mm , Length120mmthreadlength40mm , Tapered4.5Mmto3.5Mm-Withhydroxyapetitecoatingforthreads , Length100mmthreadlength20mm , Length100mmthreadlength30mm , Length120mmthreadlength30mm , Length120mmthreadlength40mm , Instruments: , Screwguide;8X6x60mm8nos , Drillguide-6X3.2X40mm-8Nos , Drillbit3.2X200mm , Halfpinintroducerdtype , Allenkey - 5Mm , Templates For Pediatric End And Central Clamp , Template For Pediatric Swivel Clamp , Container For Pediatric Rail Fixator System Appliances , Container For Pediatric Rail Fixator System Instruments , Container For Pediatric Rail Fixator System Implants , Iii - Consumables -Arthroplasty , Hip Prosthesis-Femoral – Uncemented – Bipolar - Fixed (Fenestrated) Sterile Packing; Sizes : Between 35Mm And 53Mm (Unused Sizes Will Be Exchanged For Used-Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Cemented – Bipolar- Fixed(Non-Fenestrated) Sterile Packing; Sizes : Between35mm And 53Mm(Unused Sizes Will Be Exchanged For Used-Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Cemented – Bipolar – Modular (Mueller Type)Each Unit Consists One Number Of Variable Sizes Of 1. Cemented Femoral Stem 2. Bone Cement ( Antibiotic Cement 40 Gms) 3. Bipolar Cup (Shell And Uhmwpe Insert) 4. Femoral Head (Unused Sizes Will Be Exchanged For Used Up Sizes During The Course Of Tender Contract Period At No Further Costs) , Hip Prosthesis- Femoral – Uncemented – Bipolar – Modular (Mueller Type)Each Unit Consists One Number Of Variable Sizes Of 1. Uncemented Stem 2. Bipolar Cup ((Shell And Uhmwpe Insert) 3. Femoral Head ( Unused Sizes Will Be Exchanged For Used Up Sizes During The Course Of The Year At No Further Costs) , Hip Prosthesis- Femoral – Uncemented – Revision- Modular Femoral Stem With Separate Distal And Proximal Sizing – Consisting Of Separate Coated Metaphyseal Sleeve Of Various Sizes, Standard And Lateral Neck Components Of Varying Lengths And Offset And Uncemented Stem Of Varying Length Each Unit Consists Ofone Number Of Variable Sizes Of 1. Uncemented Modular Femoral Stem 2. Uncemented Modular Metaphyseal Stem 3. Neck Component 4. Femoral Head 5. Uncemented Porous Coated Cup. 6.Acetabular Cup Liner Uhmwpe 7. Cancellous Bone Screws 6.5Mm ( 2 Nos – 20Mm,25Mm )(Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3 Years ) , Hip Prosthesis- Total – Cemented Each Unit Consists One Number Of Variable Sizes Of 1.Cemented Femoral Stem (Triple Taper Type) 2.Cemented Uhmwpe Flanged Cup. 3. Femoral Head – Diameter 28Mm/ 32Mm/ 36 Mm With Adjustable Neck Length 4. Cement Restrictor 5. Canal Centraliser 6. Antibiotic Bone Cement (2 Packets Of 40G Each) (Shelf Life Of All Items, Prior To Expiry Date Must Be At Least 3-5 Years) , Hip Prosthesis- Total – Uncemented Each Unit Consistsofone Number Of Variable Sizes Of 1.Uncemented Femoral Stem- Ha Coated 2.Uncemented Porous Coated Cup. 3.Acetabular Cup Liner Uhmwpe 4. Femoral Head – Diameter 28Mm / 32Mm/ , 36 Mm / With Adjustable Neck Lengths 5.Cancellous Bone Screws 6.5Mm ( 2 Nos – 20Mm,25Mm )(Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years ) , Knee Prosthesis- Total – Cemented Each Unit Consists One Of Number Of Variable Sizes Of 1. Femoral Component (Cocr) Right/Left 2. Tibial Tray Keeled(Cocr) 3. Uhmwpe Tibial Insert 4. Uhmwpe Patella Component Fixed 5. 2 Packets Of Antibiotic Cement 20 Gms Each (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years) , Megaprosthesis Distal Femur Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Right 2. Proximal Tibia Component 3. Resection Piece 4. Intramedullary Stem 5. Antibiotic Bone Cement 40Gm - 02 Nos , Megaprosthesis Distal Femur Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Left 2. Proximal Tibia Component 3. Resection Piece 4. Intramedullary Stem 5. Antibiotic Bone Cement 40Gm - 02 Nos , Megaprosthesis Proximal Femur - Each Unit Consists Of One Number Of Variable Sizes Of 1. Modular Bipolar Cup 2. Modular Head Trochanteric Component.Right 3. Resection Piece. 4. Intramedullary Stem Piece 5. Antibiotic Bone Cement 40Gm - 01Nos. , Megaprosthesis Proximal Femur - Each Unit Consists Of One Number Of Variable Sizes Of 1. Modular Bipolar Cup 2. Modular Head Trochanteric Component.Left 3. Resection Piece. 4. Intramedullary Stem Piece 5. Antibiotic Bone Cement 40Gm - 01Nos. , Megaprosthesis Proximal Humerus- Each Unit Consists Of One Number Of Variable Sizes Of 1.Proximal Humerus Component Right/Left 2.Resection Piece. 3. Humeral Intramedullary Stem 4. Antibioticcement 20Gm - 02Nos , Megaprosthesis Proximal Tibia -Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Right 2.Proximal Tibia Component 3.Resection Piece 4.Intramedullary Stem 5. Antibioticcement 40Gm - 02 Nos , Megaprosthesis Proximal Tibia -Each Unit Consists Of One Number Of Variable Sizes Of 1.Distal Femur Component Left 2.Proximal Tibia Component 3.Resection Piece 4.Intramedullary Stem 5. Antibioticcement 40Gm - 02 Nos , Megaprosthesis Total Femureach Unit Consists Of One Number Of Variable Sizes Of 1. Proximal Femur Head Component Comprising Of Modular Bipolar Cup 2.Modular Head, Trochanteric Component Left/Right/Neutral. 3. Resection Coupler 4. Resection Piece 5.Distal Femur Component 6.Proximal Tibia Component 7. Antibioticcement 40Gm 03 Nos. , Shoulder Prosthesis – Humeral - Modularconsisting Of Cemented Humeral Stems Of Various Sizes With Humeral Head (Various Options) With The Option Of Combining Different Humeral Stems With Humeral Head Separatelyeach Unit Consists Of One Number Of Variable Sizes Of 1. Cemented Modular Humeral Component 2Humeral Head 3. One Packets Of Antibiotic Cement 20 Gms (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3 Years ) , Elbow Prosthesis – Total–Cemented- Modular Cemented Prosthesis With Various Humeral Lengths And Sizes With Anatomical Ulnar Stems Of Varying Sizes Each Unit Consistsof One Number Of Variable Sizes Of 1. Cemented Modular Distal Humeral Component 2. Cemented Ulnar Component Right/Left 3. Two Packets Of Antibiotic Cement 20 Gms Each (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years ) , Radial Head Prosthesis – Cemented (Implant With Straight And Curved Stems, Head (Of Varying Head Diameter And Height) , Dual Mobility Uncemented Total Hip Replacement Consists Of 1.Ha Coated Femoral Stem 2.Acetabulat Shell 3.Linear Cup Polyethyelene 4.Co-Cr Head , Revision Acetabular Cup - Uncemented 1.Porous Coated-2 Nos. 2.Cup Cage Construction-1 No. 3.Triflange- 1 No. , Antibiotic Bone Cement 40G High Viscosity , Antibiotic Bone Cement 40G Low Viscosity, For Use In Cement Gun , Cement Mixing System, Each Unit Consists One Number Of 1. Cement Mixing System (Vacuum Based) 2.Femoral Break Way Nozzle 3. Pressuriser.The Sample Must Be Compatible With The (Shelf Life Of All Items Prior To Expiry Date Must Be At Least 3-5 Years) , Iv - Consumables - Spine , Spine Biopsy Kit Tissue Bipsy Device Provided With Ergonomic Handle. The Needle Should Be Equipped With A Cannula Made Of Aisi 304 Stainless Tempered Steel In Accordance With International Standards The Needle Should Have Centimeter Markings On The Cannula Surface, Allow To Easily Determine The Depth Of Insertion Into The Bone Tissue. Should Have Special Sharpening At “Fish Mouth” Of The Needle Tip. The Sample Architecture. Needle Should Improve The Penetration Capacity Establishing A Perfect Cylindrical Cutting That Maintains Intact The Set Shouldinclude: -Extraction Wire To Insert Into The Cannula Tip - Luer-Lock Cap (On The Handle) To Avoid The Blood Loss During The Extraction Step. Needle Should Be Equipped With A Stylet With Trocar Pyramidal Tip To Allow A Quick And Less Invasive Penetration Into The Cortical. , Demineralised Bone Matrix 2.5Cc , Demineralised Bone Matrix 5 Cc , Bone Substitutes This Should Be An Rhbmp-2 (Recombinant Human Bone Morphogenetic Protein-2) Formulation Combined With A Bovine-Derived Absorbable Collagen Sponge (Acs) Carrier. Should Be Fda & Dgci Approved , Olif/ Xlif Cage , Stand Alone Olif / Dlif Cage Assembly - Cage Plug Screws , Expandable Cages / Interbody Spacers For Use In Dorsal And Lumbar Spine Made Of Titanium.Should Have Usfda & Dgci Approval. Instrumentation Should Be Provided At The Time Of Surgery. (Assorted Sizes). , Interbody Cages Made Of Trabecular Metal Material For Use In Lumbar Spine Fusion. Instrumentation Should Be Provided At The Time Of Surgery. (Assorted Sizes). , Lumbar Interbody Peek Cage: Interbody Implant For Use Inlumbar Interbody Fusion. (Assorted Sizes). , Lumbar Interbody Titanium Cage : Interbody Implant For Use In Transforaminal Lumbar Interbody Fusion (Tlif) Procedures (Assorted Sizes). , Extended Tandem Connectors For 4.5 Rod System For Paediatric Deformity To Facilitate Intra-Operative Compression And / Or Distraction Maneuvers , Spinal Rod To Rod Connectors Compatable With 5.5 Mm Titanium Rods , Domino Rod To Rod Connector (Open Type) Compatable With 5.5 Mm Rod , Domino Rod To Rod Connector (Closed Type) Compatable With 5.5 Mm Rod , Transverse Connector Assembly / Cross-Links Assembly For Lumbar Spine Compatible With 5.5 Mm Rods (Titanium) Us Fda & Dgci Approved. Instrumentaion Should Be Provided At The Time Of Surgery. , Paediatric Spine Hooks (Compatible With 4.5Mm Rods) Assorted Types( Supralaminar, Infralaminar, Pedicle And Transverse Process Hooks) , Adult Spine Hooks (Compatible With 5.5 Mm Rods) Assorted Types( Supralaminar, Infralaminar, Pedicle And Transverse Process Hooks) , Kyphoplasty Kit - With 1 Baloon And Kyphoplasty Cement , Titanium Mesh Cage(Harms Type Cage) Assorted Sizes , 5.5 Mmrod For Mis Surgery Rods Should Reduces Trauma To Patient Avoidingadditional Incisions For Rod Insertion , 5.5 Mm Rods For Spine Fixation (Titanium), 400Mm , 5.5 Mm Rods For Spine Fixation (Cobalt Chrome),400Mm , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , G4 Reverse Threaded Polyaxial Pedicle Screw Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Dual Lead Titanium Pedicle Screw With Square Thread Closure Mechanismcompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4 X 20 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4 X 25 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 20 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 25 Mm Screw With Set Screw , Dual Lead Titanium Low Profile Pedice Screw For Paediatric Spine Deformity Compatible With 4.5 Mm Rod - 4.5 X 30 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Mis Compatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Cannulated Titanium Pedicle Screw For Miscompatible With 5.5 Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , S2 Alar Iliac Screws Titanium Compatable With 5.5 Mm Rods. Assorted Sizes. , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 5.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.0 X 40 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.5 X 45 Mm Screw With Set Screw , Hydroxy Apatite Coated Pedicle Screws Compatible With 5.5Mm Rod With Instruments On Loaner Basis - 7.5 X 45 Mm Screw With Set Screw , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw. , Titanium Pedicle Screws - Polyaxialcompatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 50 Mm Screw With Set Screw. , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 5.5 X 40 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 5.5 X 45 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 6.5 X 40 Mm With Set Screw , Spine Pedical Screws (Titanium) - Polyaxialreduction Screws Compatible With 5.5 Mm Titanium Rods, 6.5 X 45 Mm With Set Screw , Titanium Pedicle Screws - Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw. , Titanium Pedicle Screws - Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw. , Titanium Pedicle Screws -Fixed (Monoaxial)Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 50 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 25 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 30 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 4.5 X 35 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 25 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 30 Mm Screw With Set Screw. , Titanium Pedical Screws - Uniplanar Compatable With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw. , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 35 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 5.5 X 40 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 35 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 40 Mm Screw With Set Screw And Cement Introducer Assemby , Fenestrated Spine Pedicle Screw Compatible With 5.5 Mm Rod With Instrumets On Loaner Basis - 6.5 X 45 Mm Screw With Set Screw And Cement Introducer Assemby , Vertebral Body Augmentation Kit Kit Should Contain Vertebral Body Augmentation Cement This Should Allows For An 8-10 Minute Working Time At 68F/20C, And Enable A Controlled Introduction Of Cement. Kit Should Consists Of A Needle And A Stylet For Bone Access. The Needle Also Acts As A Cannula Through Which The Cement Is Introduced Into The Vertebra Kit Should Consist Of 15 Gauge Biopsy Needle Consists Of A Needle And Stylet Intended For Use Through An 11 Gauge Or 13 Gauge Introducer Needle. , Low Viscosity Vertebropasty Cement 20G , Pre-Bent Sub-Laminar Wire , V - Consumables -Arthroscopy , Disposable Arthroscopic Diathermy Cable With Tip Compatible With Stryker Diathermy Console 90 Degree , Titanium Suture Disc , Adjustable Loop 4Mm X 12Mm , Biocomposite Interference Screws Of Various Lenght Sizes From 23Mm To 35Mm With Dia From 7Mm To 11Mm.Two Sets Of Instrumentation Should Be Provided On Loaner Basis. , Knotless Ligament Anchor (2.6/3.5Mm) [Peek] , Fibre Loop Size 2 -0 With Straight Needle , Titanium Interference Screw Sizes From 7 To 10Mm Of Various Lengths From 23 To 35Mm With Screw Drivers. One Set Of Instrumentation Should Be Provided On Loaner Basis. , Peer Interference Screw Of Various Lenght Sizes From 23Mm To 35Mm With Dia From 6Mm To 7Mm.One Set Of Instrumentation Should Be Provided On Loaner Basis. , Fibre Wire 2-0 Size With Needle (Curved) , Titanium Anchors With High Tension Suture Material 2.8Mm/3Mm , 5Mm Suture Anchor Titanium , All Suture Anchors (1.5/1.8Mm) , A Sterile, Disposable At Least 20Cm Length Flexible Needles In Pairs Looped Together With 2-0 Ultra High Molecular Weight Polyethylene Suture For Inside Out Repair Of Meniscus , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Strainght) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Right Curved) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Left Curved) , A Sterile Disposable All Inside Menisus Repair Kit With Preloaded 2-0 Uhmw Polyethylene Suture (Reverse Curved) , Fixation Button With Loop For Acromio Clavicular Joint Stabilization , Vi - Consumables -Paediatric Implants , Pediatric Dhs With Lag Screw And Cortical Screw Assembly - 135 Degree(Short & Long Barrel) With 3.5 Mm Screws, 3 To 7 Holes , Titanium /Stainless Steel Telescopic Intramedullary Nail Consists Of Male & Female; Size : 2 - 6Mm Diameter, Length : 20 - 40Mm , Cannulated Paediatric Osteotomy Blade Plate - Child Hip Plate 3.5Mm, Angulation 90° With Blade Length 26, 32, 38Mm And Displacement 4Mm, 8Mm , Cannulated Paediatric Osteotomy Blade Plate -Child Hip Plate 4.5Mm, Angulation 80°, 90°, 100° With Blade Length 35, 45Mm And Displacement 4 & 8Mm , Cannulated Paediatric Osteotomy Blade Plate -Infant Hip Plate 3.5Mm, Angulation 90° With Blade Length 25, 32Mm And Displacement 7Mm , Cannulated Paediatric Osteotomy Blade Plate - Adolescent Hip Plate 4.5Mm,Angulation 90°, 95°, Condylar Plate - 5, 7, 9 Holes With Blade Length 40, 50, 60, 70Mm. , Medial High Tibia Plate Compatible With Proximal Tibia Osteotomy System , Proximal Tibia Osteotomy System;One Each Of - Osteotomy Chisels, Bone Spreader, Gap Measuring Device , 3.5Mm Epiphyseal 8 Shaped Plate , Lcp Pediatric Hip Plates With Screws (Size-20-110Mm) Assembly 3.5 & 5Mm, 3 To 9 Holed, Angles 90 To 130 Degrees. Provision For Exchange Of Used Implants Should Be Made. , Proximal Femoral Paediatric Lcp Plate System With Screws , Adolescent Nailing System With Nails And Bolts For The Paediatric Shaft Of Femur Fracture Size 8-10Mm Diameter And Length(240-400Mm) , Distal Femoral Osteotomy System With Medial Osteotomy Tomo Fix Plates , Enders Nailing System With Nails For Femoral And Tibial Shaft Fracture Size 2- 5Mm In Diameter And Length 240Mm- 400Mm , 2.4 Distal Radius Variable Angle Styloid Plate 4-8Holes Titanium 1 Unit Consists Of 1 Plate And Locking Screws For Available Holes , Vii - Consumables - Trauma Anatomical Locking Plates (Titanium): Costing Has To Be Given Per Unit I.E.Plate Plus Screws. For Example, In A 4 Holed Plate Includes 2 Cancellous Screws And 4 Diaphyseal Screws. Screws To Be Provided At The Time Of Surgery. Screw Sizes Will Be Determined During Surgery. Instrumentation To Be Provided On Loaner Basis , 3.5 Distal Radial Locking Plate Right And Left 4 To 12 Holes (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5 Lateral Distal Humerous Locking Plate Right And Left ( 4,6,8,10,12Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5 Medial Distal Humerous Locking Plate Right And Left (4,6,8,10,12Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5Mm Lateral Distal Tibial Locking Plate Right & Left ( 6, 8, 10, 12,14,16,18 Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , 3.5Mm Medial Distal Tibial Locking Plate Right & Left ( 6, 8, 10, 12 ,14,16,18 Holes) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Calcaneal Locking Plate Right & Left ( Anatomical) 3.5 Mm (Titanium) 1 Unit Consists Of 1 Plate And 8 Locking Screws. , Distal Femoral Locking Plate And Screws (Titanium) - Right & Left (4 Holes To 12 Holes) 1 Unit Consists Of I) Plate-1 No.,(Left Or Right) Ii) 6.5/7 Mm Locking Screws- At Least 5 Nos. For Plate Head, Iii) 4.5/5 Mm Locking Cortical Screws - At Least 5 Nos. For Plate Shaft Iv) Plate Head Should Have Atleast Five Locking Screw Holesand V) Shaft Should Have Combi Holes . Aiming Block Should Be Provided Along With Appropriate Instrumentation , Lcp- Posterior Medial Proximal Tibial Plates 3.5 (Rt And Lt) , Titanium , 2,4,6,Holes(Quote For Entire Assemblywith Screws) , Lcp Proximal Lateral Tibia Plates 4.5/5 (Rt And Lt), 5,7,9,11,13 Holes(Quote For Entireassemblywith Screws) (Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Medial Distal Femur Locking Plates 3 To 9 Holed.(Titanium) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Proximal Femoral Locking Plate And Screws (Titanium) - Right & Left (4 Holes To 12 Holes) 1 Unit Consists Of I) Plate-1 No., (Left Or Right) Ii) 6.5/7 Mm & 4.5/5 Mm Locking Screws - 5 Nos. For Plate Head, Iii) 4.5/5 Mm Locking Cortical Screws - At Least 5 Nos. For Plate Shaft Iv) Plate Head Should Have Atleast Five Locking Screw Holes And V) Shaft Should Have Combi Holes. Aiming Block Should Be Provided Along With Appropriate Instrumentation , Proximal Humerous Locking Plate (Titanium) Right & Left From 4 Holes To 10 Holes 1 Unit Consists Of I) Plate-1 No., Ii) 3.5/4 Mm Locking Screws- 6 Nos. For Plate Head, Iii) 3.5/4 Mm Cortical/Locking Screws - 4 Nos. For Plate Shaft Iv) Plate Head Should Have At Least Six Locking Screw Holes And V) Shaft Should Have Combi Holes. Aiming Block Should Be Provided Along With Appropriate Instrumentation , Proximal Medial Locking Tibial Plate (Titanium) Right & Left ( 4,6,8,10 Holes) 1 Unit Consists Of I) Plate-1 No., Ii) 3.5/4 Mm Locking Screws-3 Nos. For Plate Head, Iii) 3.5/4 Mm Cortical/Locking Screws -4Nos. For Plate Shaft Iv) Plate Head Should Have At Least Three Locking Screw Holes And V) Shaft Should Have Combi Holes . , Viii - Consumables - Screws , 6.5/7 Mm Partially Threaded/Fully Threaded Cannulated Cancellous Screws I) Should Be Made Of Surgical Grade Titanium Ii) Screws Should Be Supplied With Equal Number Of Compatible Washers. Iii) The Complete Set Of Necessary Instruments Required For Screw Insertion (Including Compatible Threaded Guide Wires (10 No’S) Should Be Supplied On Loaner Basis Iv) Sizes Required In Increments Of 5 Mm: 75 Mm To 95 Mm - 10 Each (50), 100 Mm To 120 Mm - 15 Each (75), 125Mm To 135 Mm - 5 Each (15) , Screws, 7Mm Cannulated Cancellous, 16Mm Threaded, Sizes 40Mm To 85Mm , Screws, 7Mm Cannulated Cancellous, 16Mm Threaded, Sizes 110 Mm To 140Mm , Screws, 7Mm Cannulated Cancellous, 32 Mm Threaded, Sizes 60Mm To 75Mm , Screws, 7Mm Cannulated Cancellous, Fully Threaded, Sizes 30Mm To 120Mm , Screws Cortical Self Taping , 1.5 Mm ,Sizes 10Mm To 20Mm , Screws Cortical Self Taping , 2Mm , Sizes 10Mm To 20Mm , Screws, 3.5Mm Cortical Self Taping Sizes 12Mm To 120Mm , Screws, 2.4 Mm Headless Compression, Sizes 12Mm To 30Mm (Titanium) Instrumentation Should Be Provided On Loaner Basis , Washer For Cannulated Cancellous Screws For 6.5Mm And 4Mm , Herbert Screws 4.5- 5.5Mm Sizes (30-70Mm) , Ix - Consumables - Plates , Lcp Dhs Plate Titanium The Implants Should Be Available With Long Barrel (38Mm) And Short Barrel Length Of (25Mm). The Dhs Barrel Plate Should Be Available In The Following Ccd Angles: 130°, 135°, 140° 145°And 150° The Dhs Barrel Plate Should Be Available In 4-6 Holes 12.5 Mm Dhs Blade/Screw Is Required In 65-120 Mm Increments 1 Unit Consists Of I) Dhs Blade/Screw - 1 Nos Ii) Dhs Plate - 1 Nos Iii) 5.0 Mm Locking Screw- 2 Nos, 4.5 Mm Cortex Screw- 2 Nos , 2.7/3.5 Mm Distal Anteromedial Tibia Lcp (Titanium ) 4- 10 Holes. Plate Head Should Have At Laest 8 Locking Holes.1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Variable Angle Lcp Condylar Plate For Distal Femur(Plate With Screw) (All Sizes Both Sides) Titanium 6- 18Holes, Lcp Combi-Holes In The Shaft. 1 Unit Consists Of I) Plate - 1, Ii) 5.0 Mm Variable Angle Cannulated Locking Screws -.5 Nos, 5.0 Mm Variable Angle Locking Screws -.4 Nos, The Va Periprosthetic Locking Screws 5.0 Mm-3 Nos,4.5 Cortex Screw-4 Nos. The System Should Have Aiming Arm For Variable Angle-Lcp Condylar Plate 4.5/5.0 For Mipo Technique. Conical Threaded Drill Sleeve To Angulate The Drill Bits In 15- 30 Degrees, Torque Limiting Screw Driver, Aiming Device For Mipo Should Be Providedon Loaner Basis , Variable Angle Lcp Tibial Plate For Proximal Tibia (Plate With Screw) (All Sizes Both Sides) Titanium 4 - 14 Holes Lcp Combi-Holes In The Shaft. 1 Unit Consists Of I) Plate -1, Ii) 3.5 Mm Variable Angle Locking Screws -.7 Nos,3.5 Cortex Screw-3 Nos. The System Should Have Aiming Arm For Variable Angle-Lcp Proximal Lateral Tibial Plate 3.5 Mm For Mipo Technique. Conical Threaded Drill Sleeve To Angulate The Drill Bits In 15 Degrees, Torque Limiting Screw Driver, Aiming Device For Mipo Should Be Provided On Loaner Basis , Dhs Trochanteric Stabilisation Plate Used To Stabilize The Greater Trochanter And Lateral Wall And It Is Used As A Modular Extension Of The Dynamic Hip Screw System. Should Be Compatible With All Standard Dhs , 2.4 Mm Distal Radius Variable Angle Volar Locking Plate Titaniumunit: 1 Unit Consists Of Plate-1 No., 2.4 Mm Variable Angle Locking Screws-4 Nos. For Plate Head, 2.4 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Eight Locking Screw Holes And Shaft Should Have Combi Holes (3Holes-12Holes) , 2.4/2.7/3.5 Mm Proximal Ulna Locking Plate Titanium I) Unit: 1 Unit Consists Of Plate-1 No., 2.4/2.7 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Four Locking Screw Holes And Shaft Should Have Combi Holes. Required Sizes (3H-5No, 4H-5No, 5H-2 No) , 2.4/3.5 Mm Lateral End Clavicle Locking Plate (Titanium) Right And Left Unit: 1 Unit Consists Of Plate- 1 No., 2.4 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft Ii) Plate Head Should Have Atleast Five Locking Screw Holes And Shaft Should Have Combi Holes , 2.7Mm Calcaneallocking Plate (Titanium) - Right And Left 1 Unit Consists Of 1 Plate , 8 Locking Screws , 3.5 Mm Lateral Proximal Tibial Locking Lcp Titanium I) Unit: 1 Unit Consists Of Plate-1 No.,3.5/4 Mm Locking Screws- 5 Nos. For Plate Head, 3.5/4 Mm Locking Cortical Screws - 4 Nos. For Plate Shaftiii) Plate Head Should Have Atleast Five Locking Screw Holesand Shaft Should Have Combi Holes Iii) Supplier Should Supply The Complete Set Of Instruments Including Drill Bit, Tap, Depth Gauge, Threaded Drill Sleeve, Screw Driver, Aiming Device/Guiding Block On Loaner Basis Till Stocks Last Iv) Inventory With All Screw Sizes Should Be Maintained In Jipmer V) Supplier Should Be Ready To Exchange Unused Plates For Required Sizes Left:3H-8No, 4H-10No, 6H-12No, 8H-5No,10H-5No Right: 3H-8No, 4H-10No, 6H-12No, 8H-5No, 10H-5No , 3.5 Mm Precontouredacetabular Reconstruction Plate 6 To 20Holes (Right And Left) With Screws , 3.5 T Buttress Plate 3 To 4 Holes , 3.5 T Oblique Plate Right & Left 3 To 10 Holes , Distal Humerus Extra Articular Anatomical Locking Plate& Screw Assemblytitanium(I) Unit: 1 Unit Consists Of Plate-1 No., 3.5 Mm Locking Screws-4 Nos. For Plate Head, 3.5 Mm Locking Cortical Screws - 3 Nos. For Plate Shaft (Ii) Plate Head Should Be Anatomical To Posterior Contour Of Lateral Condyle, Atleast Five Locking Screw Holes And Shaft Should Have Combi Holes (Iii) Supplier Should Supply The Complete Set Of Instruments Including Drill Bit, Tap, Depth Gauge, Threaded Drill Sleeve, Screw Driver, Aiming Device/Guiding Block On Loaner Basis Till Stocks Last (Iv) Distal Humerus Extra Articular Anatomical Locking Plate Left: (4H - 5No, 5H - 5No, 6H- 5No, Right: 4H - 5No, 5H - 5No, 6H- 5No) , Locking Plate With Screw Construct For Fixation Of High Tibial Osteotomy (Titanium)- Head Should Have At Least 3 Holes (All Sizes) 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Mini Fragment Plates 3 To 5 Holes With Screws, With Screw Driver , Drill Bit , Plate, 3.5Mm Pubic Symphysis 4 To 6 Holes With Screws , Plate, 4.5 Dcp, 6 To 12 Holes , Plate, Low Profile Reconstruction Straight Plate 3.5Mm For Acetabulum 6 To 20 Holes With Screws , 3.5Mm Quadrilateral Plate System For Acetabular Fracture , 3.5Mm Intrapelvic Acetabular System With Plate And Screws , Proximal Radius Locking Plate With Screw Construct For Radical Head (2.4Mm) , Proximal Radius Locking Plate With Screw Construct For Radical Neck (2.4/2.7Mm) Titanium1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. , Spring Plates 3.5Mm 3 To 4 Holes With Screws , Pfn With Helical Blade (Titanium) 1. Range : Proximal Femoral Nails From 9 Mm Dia To 12 Mm Dia Length 170 Mm To 340 Mm 2. Units: Each Proximal Femoral Nail Unit Consist Of (I) Proximal Femoral Nail - 1 No ( 9 Mm Dia To 12Mm Dia Length 170 Mm To 340 Mm) (Ii) Pfn Blade - 1 No.( 75Mm - 120Mm ) (Iii) 4.9 Mm Locking Bolt X 2 , Titanium Mount Block For Wire / Cable.Should Be Compatible With 4.5Mm Locking Plates. Should Have 5Mm Threads , Fumeral Neck System - 1 Unit Consisting Of Bolt (10Mm), Anti-Rotation Screw (6.4Mm), Locking Screw (5Mm), 130 Degree One Holed Plate With Instrumentation On Lonar Basis , Perimeter Calcaneal Locking Plate Right & Left ( Anatomical) 3.5 Mm Or 2.7 Mm (Titanium) 1 Unit Consists Of 1 Plate And 8 Locking Screws. , X - Consumables - Nails , Titanium Elastic Nail, 2.5 X 44 , Titanium Elastic Nail, 3 X 44 , Titanium Elastic Nail, 3.5 X 44 , Titanium Elastic Nail, 4 X 44 , Titanium Elastic Nail, 4.5 X 44 , Reconstruction Femoral Nail 1. Should Be Made Of Surgical Grade Stainless Steel Or Titanium 2. Nail Should Be Compatible With Antegrade Piriform Fossa Entry 3. Proximal Nail Should Have Options For Recon Bolts, Descending Trochanteric Bolts And Lateral To Medial Standard Interlocking Bolt (2 Each) 4. Distal Nail Should Atleast Two Locking Holes 5. The Complete Set Of Instrumentation Required For Nail And Locking Bolt Insertion Should Be Supplied On Loaner Basis 6. One Nail Along With All The Requisite Bolts Will Be Considered As One Unit 7. Sizes Required: 9Mm X 38, 40, 42 - 4 Units Each10mm X 38,40,42 - 8 Units Each11mm X 38,40,42 - 8 Units Each , Retrograde Femoral Nail (Left And Right) Titanium . Each Unit Consists Of 1 Nail (Both Short/Long), Spiral Blade/ Screw-1 Nos, 5.0 Mm Locking Screw-3 Nos , Intramedulary Nail, Inter Lockingfemur (Titanium) 1. Range : Femur Interlocking Nails From 9 Mm Dia To 13 Mm Dia Length 32 To 42 Mm 2. Units: Each Linterlocking Nail Unit Consist Of (I)Interlocking Nail - 1 No (Ii) Interlock Bolts X 4 , Tibial Nail For Metaphysial With Diphysial Fractures.(Titanium )Proximal Part Of Nail Should Have 5 Locking Options, 3 Oblique And 2 Medio- Lateral.Distal Part Of Nail Should Have 4 Locking Option In Multiple Directions (Assorted Sizes) 1 Unit Includes 1 Nail With 3 Proximal Screws And 2 Distal Screws , Pfn Nail Long -(Titanium) 1. Range : Proximal Femoral Nails From 9 Mm Dia To 11 Mm Dia Length 300 Mm To 440 Mm 2. Units: Each Proximal Femoral Nail Unit Consist Of (I) Proximal Femoral Nail - 1 No ( 9 Mm Dia To 11 Mm Dia Length 300 Mm To 440 Mm) (Ii) 8 Mm Cannulated Locking Bolt ( 65-110) X 1 6 Mm Cannulated Locking Bolt ( 65-110) X 1 4.9 Mm Locking Bolt X 2 , Intramedulary Nail, Inter Lockingtibia (Titanium) 1. Range : Tibial Interlocking Nails From 7 Mm Dia To 10 Mm Dia Length 28 Mm To 34 Mm 2. Units: Each Tibial Interlocking Nail Unit Consist Of (I) Tibial Interlocking Nail - 1 No (Ii) 3.9 / 4.9 Interlock Bolts X 4 , Tibio Calcaneal (Hindfoot) Fusion Nail: Titanium 1.Range : Nails From 9 Mm Dia To 13 Mm Dia Length 20 Mm To 34 Mm 2. Units: Eachunit Consist Of (I) Tibiocalcaneal Nail - 1 No (9 Mm Dia To 13 Mm Dia Length 20 Mm To 34 Mm) (Ii) 5 Mm And 6Mm Locking Screws X 5Nosalong With One 12.5Mm Spiral Blade(45-100Mm)Corresponding To The Case , Enders Nail System With Nails 2-5Mm In Diameter And Length 240-400Mm , Adolescent Nailing System With Nails And Bolts 8-10Mm In Diameter And Length 240-400Mm , Straight Titanium Proximal Humeral Nail - 1 Unit Consisting Of Nail 1 No., 4.5Mm Blunt Locking Screw With Suture Hole - 3 Nos., 3.5Mm Locking Screw - 2 Nos., 4Mm Locking Screw - 2 Nos. With Instrumentation On Lonar Basis , Xi - Consumables - Miscelleanous , Bone Biopsy Needle Set , Saw Blades 5Mm To 14 Mm Compatible With Conmed , Burr, Round Fluted 6 Mm To 12Mm , Disposable Diathermy Cables -Monopolar Adult , Cement Nozzles With Gun On Lonar Basis , Arthroscopy Drape Set (Sterile) (With Foot Cover, Sterile Drape For Camera Cable And Cling Drape). , Laminectomy Drapes , Sterile Disposable Drapes For 2D C-Arm (Three Pieces) With Poly Strapes - Long Size , Thr Drape Disposable Made Of Material 68-77 Gsm Spun Lace Fabric Water Repellent, Length 200Cm, Width 160Cm, Consists Of Headsheet (1X1.5M), Adhesive Strip (4Cmx1.5M), Two Packets (12X35cm), Two Tube & Cable Holder Workpad (30X50cm), U-Sheet(1.75X1.5M). U- Cut(70X15cm), Straight 24 Cm Round, Two Absorbent Workpad (50X10cms) & Polysheet Lining (1X1.25M) , Transparent Drapes With Adhesive Edges (Size - 65X40cms) Betadine Coated , Wound Dressing Sterileincision Size 15X7.5Cm , Wound Dressing Sterileincision Size 20X10cm , Wound Dressing Sterileincision Size 30X10cm , Wound Dressing Sterile Impervious Silver Impregnatedincision Size 20X 10 Cm , Wound Dressing Sterile Impervious Silver Impregnated Sterile Incision Size 30X10 Cm , Soft Roll Cotton Pad - 7.5 Cms , Soft Roll Cotton Pad - 10 Cms , Soft Roll Cotton Pad - 15 Cms , Corkscrew Electrode Set Spiral Needle 0.6 Mm With Tip Cable 1.5 M With 1.5 Mm Touchproof Male Connector Din42802 Sterile Sets With Each 6 Electrodes Red, Green, Yellow, Blue, Black And White, Eto Sterilised, Packed Individually, Single Use , Sdn Electrode Trigon Gn 20/1500, Stainless Steel 1.5 Mm Touchproof Connector, 1 Electrode Green (Ground), Needle Length 20 Mm, Diameter 0.45 Mm, Cable Length 1500 Mm, Single Use, Eto Sterilised , Sdn Electrodes Trigon 15/2000, Stainless Steel 1.5 Mm Touchproof Connector, Pair Of Electrodes Red/Black, Red/White, Blue/Black, Blue/White, Yellow/Black, Yellow/White, Violet/Black, Violet/White, Grey/Black, Grey/White, Needle Length 15 Mm,Diameter 0.45 Mm, Cable Length 2000 Mm, Single Use, Eto Sterilised , Sdn Electrodes Trigon 20/2000, Stainless Steel 1.5 Mm Touchproof Connector, Pair Of Electrodes Red/Black, Red/White, Blue/Black, Blue/White, Yellow/Black, Yellow/White, Violet/Black, Violet/White, Grey/Black, Grey/White, Needle Length 20 Mm,Diameter 0.45 Mm, Cable Length 2000 Mm, Single Use, Eto Sterilised , Surface Adhesive Electrode With Push-Button, With Gel, Dimensions: 48 X 38 Mm, Delivered Non-Sterile, Single Use Only , Fully Synthetic Beta-Tricalcium Phosphate Fully Resorbable Granules Of Average Particle Size 2Mm - 5Cc , Artificial Dural Graft Non-Biological / Synthetic, Biocompatible, Implantable . Sewable To Normal Dura. Should Be Impervious To Fluid. For Permanent Implant. Should Lead To Minimal Adhesion Formation And Tissue Reaction. Expanded Polytetrafluoroethylene (Eptfe) Preferred. , 10% Povidine Iodine 100Ml Bottles , Pulse Lavage , Tps Oil Lubricant , Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste Of Beta-Tricalcium Phosphate And Calcium Sulphatein 50:50 Ratio And With Zpc In A Kit - 5Cc , Injectable Fullyresorbable Synthetic Bone Graft Substitute Setting Paste Of Beta-Tricalcium Phosphate And Calcium Sulphate In 50:50 Ratio And With Zpcin A Dual Syrige Mixing System - 2.5Cc , Neurosurgery Patties , Synthetic High Purity Implant Grade Calcium Sulphate Pre-Formed Pellets Of Size 3Mm And 4.8Mm - 5Cc , Synthetic Recrystallised Hemihydrate Calcium Sulphate Kitto Prepare Antibiotic Impregnated Resorbable Pellets For Delivery Of Antibiotics Locally - 5Cc , Fiber Glass Synthetic Plaster Cast Kit Consisting Of Soft Cotton Roll, Gloves And Fibrecast 7.5Mm To 12.5 Mm , Disposable Diathermy Patient Platepaed , Disposable Diathermy Patient Plate Adult , Stimulation Probe 85Mm Monopolar, Straight, Ball Tip 1.5 Mm Touchproof Connector, Straight Shaft, Ball Diameter 2.3Mm, Working Length 85Mm, With Neutral Sdn Electrode Black, Cable Length 3000Mm, Single Use, Eto Sterilised , Fully Resorbable Synthetic Bone Graft Substitute Mouldable Putty Of Beta-Tricalcium Phosphate And Calcium Sulphate In 50:50 Ratio With Zpc -10Cc , Rust Remover , Gigly Saw , Disposable Suction Tubes With Suction Tip , Nitinol K Wire Size 1, 1.5, 1.8 & 2Mm , Radiofrequency Ablator Single And Multiple Prongs- 15 In Each (Compatible With Serfas) , Fibrin Sealant/Glue For Use In Ortho-Surgery To Prevent Csf Leak Based On Fibrin Coagulum Formed On Mixing Fibrinogen And Thrombin Components In Easy To Apply Chamber And Nozzle System. Dual Tip Syringe System And Vials With Sterile Water For Reconstitution Should Be Part Of The Package. Total Quantity Should Be At Least 1 Ml After Generation Of Fibrin. Warming And Stirring Device Should Be Made Available In Ot Or On Demand Within 24 Hours. Components, If Derived From Pooled Or Single Donor Human Blood Should Be Free From All Known Pathogens. (Any Agitating Device Required To Mix The Glue Should Be Provided During Use And Kept In Ortho Ot) , Stapler Remover - Stainless Steel - Reusable , Acepto Syringe , Hemostatic Dressing For External Application , 4 Ply Non-Woven Gauze, Size 4X4 Inches, Impregnated With A Natural Inorganic Mineralwithx- Ray Detectable Strip. , Soft Roll For Ctev Clinic 6Inches , Patient Pre-Operative Skin Preparation Solution 10.5 Ml In Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa. , Sterile Surgical Tourniquet ( All In One Exsanguination Sterile Tourniquet) - Sizes 14 - 85Cms (Small, Medium, Large, Extra Large) , Xii - Non Consumable - General Instruments , Lead Apron Normal - Consists Of Frontal Overlap, Velcro Panels, Adjustable Elastic Belt For Reduced Back & Shoulder Stress & Side Slits. , Lead Apron Zero Lead - Consists Of Frontal Overlap, Velcro Panels, Adjustable Elastic Belt For Reduced Back & Shoulder Stress & Side Slits. , A Reusable Suture Cutter Open Ended With 4.2Mm Shaft Diameter Left Opening And Total Length Of 13Cm For Arthroscopic Suture Cutting , A Knot Pusher Closed End With Modified Blue Handle In Order Provide Ergonomic Feel And Distal Edges Should Be Smooth To Avoid Suture Cutting In Rotator Cuff Repair , A Metal Reusable Instrument With 3.4 Mm Shaft Diameter Straight Shaft And Approximately 16Cm In Length For Arthroscopic Suture Retrieval , Arthroscopic Hook Scissors 20 -30 Degree Left , Arthroscopic Hook Scissors 20- 30 Degree Right , Arthroscopic Hook Scissors Straight , Arthroscopic Knee Curettes With Handle: , Curette, Small, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Curette, Medium, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Curette, Large, Oval, Curved 10 Degree Upwards, Working Length More Than 12Cm , Bending Tool , Cannula To Access Posterior Horn , Double Lumen Cannula Curved Left , Double Lumen Cannula Curved Right , Double Lumen Cannula Curved Up Left , Double Lumen Cannula Curved Up Right , Double Lumen Cannula Straight , Metal Mallet With Plastic Head , Length 22.5Cm , Notch Chisel With Handle Curved 15 Degrees Downwards , Working Length More Than 12 Cm , Round Tip,With Markings For Depth Measurement , Osteotome. Thin, Flat Tip, 10Mm Width For Harvesting Bone Patella Tendon Graft , Osteotome. Thin, Flat Tip, 8Mm Width For Harvesting Bone Patella Tendon Graft , Rasp , Narrow, Curved, Working Length More Than 12 Cm , Rasp , Narrow, Straight, Working Length More Than12cm , Reusable Inside Out Meniscal Repair Set , Plate Bender , Ilizarov Wire Cutter , Kwire Cutters , Rod Cutters , Wire Cutter Cum Bender , Metal Bone Biopsy Needle Set - Outer Sleeve Cannulated 5 Mm , Cement Mixing Bowl With Spatula , Centrifuge For Prp And Bma Concentrate, Table Top Automated With Brushless Induction Motor 6000 Rpm, Weight 5 Kg With 24 Tubes Of 15 Ml , Hoke Chisel , Debakey Bull Dog Clamps Vascular Size - 25, 30, 45Mm , Diethrich Debakey Cross Action Bulldog Clamp Angled 50°, Jaw 10Mm And 52Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Angled 50°, Jaw 14Mm And 54Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Straight, Jaw 12Mm And 53Mm Total Length With Standard Pressure Of 80 Grams , Diethrich Debakey Cross Action Bulldog Clamp Straight, Jaw 15Mm And 56Mm Total Length With Standard Pressure Of 80 Grams , Multifunctional A3 Copier/Printer, Duplex, Lan, Radf, Scan To Folder, 20Cpm , Cuff Arm For Tourniquet Compatible With Vbm M/C Size - Adult , Cuff Thigh For Tourniquet Compatible With Vbm M/C Size - Adult , Cuff Tourniquet Compatible With Vbm M/C Size - Paed , Volkman Curette 220 Mm (Size 3 Mm) Oval Cup - Sharp Edged , Volkmans Curettee Backward Angled 2 To 4 , Volkmans Curettee Forward Angled 2 To 4 , Superfine Vessel Dilator 13,5Cm, Straight Flat Handle 9Mm, Tips 4X0,3Mm. Must Have A Highly Polishedarea In The Working Surface To Avoid Interluminal Injury In The Vessel , Elevator Disector Double Ended , Fine Disector Reinfield , Freer Double Ended Dissector, With Sharp And Blunt Ends 190Mm , Killian Double Ended Dissector With Sharp And Blunt Ends 180Mm , Mcdonald Double Ended Dissector, 190Mm , Micro Dissector Flat/Curved , Penfield Dura Dissector, Double Ended, Curved, 290Mm , Penfield Dura Dissector, Double Ended, One Side Wax Packer And One Side Dissector Curved, 190Mm , Tungsten Carbide Metzenbaum-Aquila-Fino Dissect.Sc Curved, Bl/ Round, Tc, Sc, Golden Scres 18Cm , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.18Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.20Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.25Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.28Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Dissec.18Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.20Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.23Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.20Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.23Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.23Cm,Str. Black Coated, Golden Rings , Tungsten Carbide Metzenbaum-Dissect.Scis.26Cm,Cvd. Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.26Cm,Str. Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.30Cm,Cvd. Titan Nitrite Coated-Copper , Tungsten Carbide Metzenbaum-Dissect.Scis.30Cm,Str. Black Coated , Tungsten Carbide Metzenbaum-Dissecting.Scissors , Watson-Cheyne Double End Dissector, 13Cm , Hinterman K-Wire Distractor / Retractor - Small, Large , Hand Held Doppler Machine Portable With Pointed 8Mhz Prob For Bedside Evaluation Of Blood Flow Status , Battery Operated Power Drill (With Batteries - 2 Nos + Charger-1 No) , Hand Drill Jacob Chuck With Key , Long Cannulated Screw Driver , Screw Drivers 3.5 Mm : Length 200 Mm Non Cannulated , Screw Drivers 3.5 Mm : Length 250 Mm Non Cannulated , Screw Drivers 4.5 Mm : Length 250 Mm Non Cannulated , Cobbs Spinal Elevator Straight & Angled , Periosteal Elevator , Bone File S/S Compatible With Power Reamer Attachment , Fibre Optic Cable With Adopter Length 8.5 Feet Or 260Cm(Compatible With Karl Storz Light Source) , 8 Ferris Smith Forceps , Allies Tissue Forceps 150Mm , Debakey Dissecting Forceps With Tungsten Carbide Tip, Round Handle,Must Be Useful For Needle Pulling Of 5 0 And 6 0 Suture Needles. 15Cm Length And 2Mm Jaw. , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 5 , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 7 , Dissecting Forceps Toothed Cross Serrated Boss 2X3 Teeth 8 , Forceps Mosquito Curved Arteries Curved Serrated Jaw 5 , Forceps Spencerwell Cd Arteries , Hudson Nontoothed Forceps , Hudson Toothed Forceps 170Mm , Leksell Rongeur , Micro-Necro Forceps With Debakey Autramatic Jaw, Round Handle, 15Cm Total Langth And 1.2Mm Jaw. , Rhoton Micro-Forceps 15Cm/Ø8mm Handle,With Tying Platform 6X0.7Mm, Straight Jaw With Diamond Dust , Rhoton Micro-Forceps 15Cm/Ø8mm Handle, Diamand Coated Ring Jaws 2X1mm,With Guide Pin , Rhoton Micro-Forceps 15Cm/Ø8mm Handle, Diamand Dust Ring Jaws 1X.5Mm,With Guide Pin , Ruskin-Liston Bone Cutting Forceps, Length 18Cm, Straight, Ceramic Black Coated - Bite Size 3, 4, 5 ,6 Mm , Ruskin-Liston Bone Cutting Forceps, Length 18Cm, Curved, Ceramic Black Coated - Bite Size 3, 4, 5 ,6 Mm , Silver Non-Stick Bipolar Forceps With European Style Flat Pin Width Of Tips Sizes From 0.3Mm To 2.0Mm, Length 150Mm To 220Mm , Silver Non-Stick Bipolar Forceps With European Style Flat Pin With Round Handle With Golf Ball Finish Width Of Tips From 0.3Mm To 2.0Mm, Length 150Mm To 220Mm , Standard Dissection Forceps - Plain Tip,2Mm Tip - 110 To 130 Mm Long , Standard Dissection Forceps - Plain Tip, 3Mm Tip - 140To 160Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -180Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -230Mm Long , Standard Dissection Forceps - Plain Tip, 4Mm Tip -305Mm Long , Standard Dissection Forceps - Toothedtip,3 Mm Tip -230Mm Long , Standard Dissection Forceps - Toothedtip,4Mm Tip -305Mm Long , Standard Dissection Forceps - Toothedtip, 2.5 Mm Tip - 140To 160Mm Long , Standard Dissection Forceps - Toothedtip, 2Mm Tip - 110 To 130 Mm Long , Standard Dissection Forceps - Toothedtip, 3 Mm Tip -205 Mm Long , Tillys Forceps , Depth Gauge Big 3.5 Mm , Length 250 , Depth Gauge Medium 3.5 Mm , Length 200 , Depth Gauge Medium 4.5 Mm , Length 200 , Depth Gauge Small 3.5 Mm , Length 150 , Depth Gauge Small 4.5 Mm , Length 150 , Bone Graft Punches Large 254 Mm, Head Dia 12X18mm Straight & Angled , Bone Graft Punches Small 254 Mm, Head Dia 9X15mm Straight & Angled , Guide Wire Aiming And Repositioning Device1.Should Allow 5 Degree Angulation And 5 Mm Offset Insertion 2. Should Accommodate Guide Wires Upto 3.2 Mm , Spring Handle Micro Scissor Curved Jaw, Total Length 14,5Cm,Round Handle , Spring Handle Micro Scissor Straight Jaw, Total Length 14,5Cm,Round Handle , T Handle For Shanz Pin Insertion With Jacob Chuck 140 Mm, Chuck Key , Curved Needle Holder Large , Debakey Needle Holder- Tungsten Cardbide Tip - Withstraight Jaws For Suture Size5-0 Ring Handle, - With Ratchet240-250 Mm Long , Debakey Needle Holder - Tungsten Cardbide Tip - With Straight Jaws For Suture Size 2-0, 3-0 & 4-0 Ring Handle, - With Ratchet 150-180Mm Long , Debakey Needle Holder Tungsten Cardbide Tip - With Straight Jaws For Suture Size 2-0, 3-0 & 4-0 Ring Handle, - With Ratchet 200-220Mm Long , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 1: 140 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 2:185 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 3:205 Mm Long) , Hegarvascular Needle Holder - With Tungsten Cardbide Edges- 1 Mm Wide Ring Handle, - With Ratchet (Size 4:230Mm Long) , Mayo Needle Holder Straight Wide Cross Serrated Jaws 7 , Micro-Needle Holder Round Handle, With Ratchet, Total Length 15Cm, Handle Ø8mm, Straight Jaw , Jaws11x1.5Mm, Diamond Dust Jaws, Streamlined. Should Accommodate 60 Suture Needle. , Micro-Needle Holder Round Handle, With Ratchet, Total Length 15Cm, Handle Ø8mm, Straight Jaw , Jaws11x2mm, Diamond Dust Jaws, Streamlined. Should Accommodate 50 Suture Needle. , Straight Needle Holder Small, Med, Large , Tungsten Carbide Crile-Wood Needle Holder 15Cm , Tungsten Carbide Crile-Wood Needle Holder 15Cm Black Coated , Tungsten Carbide Crile-Wood Needle Holder 18Cm , Tungsten Carbide Crile-Wood Needle Holder 20Cm , Tungsten Carbide Crile-Wood Needle Holder 22Cm , Tungsten Carbide Crile-Wood Needle Holder 23Cm , Tungsten Carbide Mayo-Hegar Needle Holder 14Cm , Tungsten Carbide Mayo-Hegar Needle Holder 16Cm , Tungsten Carbide Mayo-Hegar Needle Holder 18Cm , Tungsten Carbide Mayo-Hegar Needle Holder 18Cm Black Coated , Tungsten Carbide Mayo-Hegar Needle Holder 20Cm , Tungsten Carbide Mayo-Hegar Needle Holder 24Cm , Tungsten Carbide Mayo-Hegar Needle Holder 26Cm , Tungsten Carbide Micro-Vascular Needle Holder 14Cm , Tungsten Carbide Micro-Vascular Needle Holder 18Cm , Tungsten Carbide Micro-Vascular Needle Holder 20Cm , Tungsten Carbide Micro-Vascular Needle Holder 23Cm , Tungsten Carbide Micro-Vascular Needle Holder 26Cm , Bone Hook Small, Med, Big , Love Nerve Hook Ball Tip , Love Nerve Hook Blunt , Femoral Head Impactor Nylon Faced , Graft Impactor Offset Foot 30 Degree 4 X 12 Mm , Beyers Bone Nibbler 7 Long , Ruskin Mini Curved Bone Nibbler 6 Long , Nitinol Wire , Detachable Handle Compatible For Fine Osteotome Thin Slender Stem. , Curved Osteotome For Acetabulum , Hibbs Osteotomes Thin Solid Forged 203 Mm - 10 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 15 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 20 Mm Wide Str & Cvd , Hibbs Osteotomes Thin Solid Forged 203 Mm - 5 Mm Wide Str & Cvd , L Osteotomes For Spinal Osteotomies , Femoral Head Template 42-58Mm (Increment Of 2 Mm) , Radiolucent Pelvic Retractor,Medium - Length 268 Mm & Large - Length 323 Mm , Wirepasser , Beath Pin Drill Tip , Beath Pin Spade Tip , Plier Flat Nose , Pliers Heavy Duty , Pliers With Side Cutters For Wire Upto 2.5 Mm Chromium Plated , Ball Tipped Love Nerve Root Probe 1.5 X 4Mm Tip , 200 Mm Length , Ball Tipped Love Nerve Root Probe 1.5 X 3Mm Tip , 200 Mm Length , Foraminotomy Punch, Downcurved Shaft, Small Handle, 20Cm, 2Mm Bite , Foraminotomy Punch, Down Curved Shaft, Small Handle, 20Cm, 3Mm Bite , Foraminotomy Punch, Upcurved Shaft, Small Handle, 20Cm, 2Mm Bite , Foraminotomy Punch, Upcurved Shaft, Small Handle, 20Cm, 3Mm Bite , Kerrison Punch Down Cutting 2 To 3 Mm 45 Deg , Kerrison Punch Down Cutting 2 To 3 Mm 90 Deg , Kerrison Punch Up Cutting 1Mm To 4Mm , Handle For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish) , Handle For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Black Coated) , 2 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 3 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 4 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 5 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly (Ss Matte Finish), Tube -Shaft 20Cm, 130 Degree With Ejector , 2 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 3 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 4 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , 5 Mm - Cutting Tip For Rotatable Kerrison Bone Punch (Billy Or Similar) Assembly Black Coated) Tube -Shaft 20Cm, 130 Degree With Ejector , Depth Gauge Big 4.5 Mm , Length 250 , Box Wrench For Bolt , Box Wrench For Nut , 4 Prong Retractors , Acromial Retractor Medium , Acromial Retractor Small , Anterior Capsular Retractor , Anterior Glenoid Neck Retractor , Blunt Point Gelpi Retractor , Charnley Initial Incision Retractor : 308 Mm With Ball, Hook And Chain , Deltoid Retractor , Deltoid Retractor Large , Deltoid Retractors Small , Fine Suction Nozzles Frazier Retractor , Fine Suction Nozzles Mcguckins Retractor , Gelpi-De Bakey Retractor 15Cm , Gelpi-Loktite Retractor 18Cm , Gelpi-Seletz Retractor 15Cm , Gerdar Subacromian Retractor , Hand Held Deltoid Retractor , Higs Retractor , Hinged Gelpi Retractor , Hohmann Retractor 10 Mm Width, Small, Short Narrow Tip 220 Mm Length , Hohmann Retractor 6 Mm Width, Small, Short Narrow Tip 160 Mm Length , Hohmann Retractor 8 Mm Width, Small, Short Narrow Tip 160 Mm Length , Humeral Head Retractors , Jackson-Burrows Retractor 18Cm,Blunt , Kolbel Self Retaining Glenoid Retractor With Cutter Blade Set , Langenbeck Retractor Large Straight , Langenbeck Retractor Medium , Mitchell Rugine Retractor Fan Shaped Straight Sharp Edge 210 Mm , Modified Fukuda Retractor Large , Modified Fukuda Retractor Small , Nerve Root Retractor , Pectoral Retractor Large , Pectoral Retractor Small , Rang Retractors - Set Of 2 For Sciatic Notch , Richardsons Retractor , Scofield Retractor , Self Retaining Retractor Frame (Shoulder) , Weitlander Retractor , Bone Nibbler/Rongeur Docuble Action Fine Straight & Angled Length 190 Mm , Bone Nibbler/Rongeur Docuble Action Fine Straight & Angled Length 250 Mm , Bone Nibbler/Rongeur Docuble Action Forward Angled Length 250 Mm , Bone Nibbler/Rongeur Docuble Action Straight & Angled Length 190 Mm , Bone Nibbler/Rongeur Docuble Action Straight & Angled Length 250 Mm , Disc Rongeurs (Pitutary Disc Forceps) Angled Sizes 1Mm To 4Mm , Disc Rongeurs (Pitutary Disc Forceps) Straight Sizes 1Mm To 4Mm , Echlin Bone Rongeur Forcep 23Cm/2Mm To 4Mm,Straight , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Curved Down, Detachable , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Curved Up, Detachable , Gruenwald (Cushing) Rongeur 18Cm/2, 3, 4 X10mm, Straight, Detachable , Ruskin Bone Rongeur Forcep, Double Action 18Cm Length/Bite Size 4Mm To 5Mm, Straight,Ceramic Black Coated , Battery Operated Power Saw (With Batteries - 2 Nos + Charger-1 No) , Measuring Scale - 15 Cm , Measuring Scale - 30 Cm , Kilner Scissors 5 Straight & Curved , Mayo Scissors - With Tungsten Carbide Edges - Curved, Large 230 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Curved, Medium170 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Curved, Small145mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Large 230 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Medium170 Mm Long , Mayo Scissors - With Tungsten Carbide Edges - Straight, Small145mm Long , Metzenbaum Scissors -With Tungsten Carbide Edges - Lazy S Curved, 205 Mm Long , Metzenbaum Scissors -With Tungsten Carbide Edges - Lazy S Curved, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved,115Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 145 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 205 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 260 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 285 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Curved, 300 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Lazy S Curved, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight,300 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 115Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 145 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 180 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 205 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 230 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 260 Mm Long , Metzenbaum Scissors - With Tungsten Carbide Edges - Straight, 285 Mm Long , Plaster Cutting Scissors , Scissors For Cutting Poly Proplene Suture Material And 10 Suturematerial - One Side Of The Blade With Serration And Another Side With Tungesten Carbide Tip - Available Lengths: 6, 7, 8 , Scissors Metzenbaum 5 Straight & Curved , Scissors Metzenbaum 7 Straight & Curved , Tungsten Carbide Mayo Scissor 17Cm, Straight, Black Coated, Golden Handles , Tungsten Carbide Mayo-Stille Scissor 17Cm,Curved Titan Nitrite Coated-Copper , Charnley Scoop Long Small & Medium , Scoop Double Ended Fine , Continuous Band Sealer Machine For Packing Instruments And Implants For Plasma Sterilization , Hoen Dura Separator 15Cm/45° , Hoen Dura Separator 15Cm/90° , Subscapulers Spreader , Tendon Stripper With Rotating Blade For Iliotibial Tract , Suction Appratus Mobile With Disposable/Bio-Degradable Consumable Sealed Containers , Yankauer Suction Nozzle , Wire Tensioner (Tbw) , Wire Tensioner Direct Measure , Fukushima Suction Tube Conical Wl 115Mm/ Fr.6 To 8, Flexible , Guide Wire 2Mmx40 , Guidewire 2.5Mmx40 , Ss Wire Cutters , Combination Wrench 10,11 , Triangle Support Knee Positioning Large & Standard , Xiii - Special Quantity Items - Paediatric Implants , Micrometric Swivelling Clamp, Of-Garches, T-Clamp, Multiplanar Clamp Compatible With Paediatric Limb Reconstruction System (Lrs) , Mini-Rail Lengthener With Articulation For Short(Upto 32.5Mm), Standard(Upto 57.5Mm) & Long(Upto 135.5Mm) , Mini-Rail Lengthener Without Articulation For Short(Upto 32.5Mm), Standard(Upto 57.5Mm) & Long(Upto 135.5Mm) , Bone Screw - With Taper Thread Design, Self Tapping Design - Length 150 - 260Mm; Thread Length 30 - 90Mm; 6Mm Shaft Diameter , Xiv - Non-Consumables , Bite Sizes : 2 To 5 (Upcutting And Down Cutting Detachable Tips, 40Degrees And 90 Degrees) , Fine Osteotome Thin Slender Stem, Sizes - 2 To 10Mm Compatible With Detachable Handle , Chisel Blades With Handle Width 10 Mm, Short, Width 10 Mm, Long, Width 16 Mm, Short, Width 16 Mm, Long, Width 25 Mm, Short, Width 25 Mm, Long, Width 5 Mm, Short, Width 5 Mm, Long , Curved Chisel Blades With Handle Width 10 Mm, Width 16 Mm, Width 25 Mm , Pelvic Osteotomes- Straight, Angled, Short Angled Bayonet Shaped, Flag Shaped (15 & 20Mm Width) , Pelvic Osteotomy Chisel, Curved Length 304/134 Mm, Width 15 & 20Mm , Pelvic Osteotomy Chisel, Curved Length 309 Mm, Width 15 & 20Mm , Radiolucent Hohman Retractors Width 8 Mm, Length 220 Mm, Width 22 Mm, Length 250 Mm, Width 35 Mm, Length 275 Mm, Width 18 Mm, Length 240 Mm, Width 24 Mm, Length 267 Mm , Radiolucent Pelvic Retractor (260 Mm & 320Mm Length) , Cannulated Reamers Set With T-Handle Sizes : 6Mm To 13Mm , Army - Navy Retractor - Set Of 2 Right Angled , 8 1/2 Inch , Shoulder Positioning (Traction) Assembly For Shoulder Surgery (Lateral Decubitus & Beach Chair Position) , Arthroscopic Probe , Arthroscopic Resector Cutters 3.5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Resector Cutters 5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Aggressive Plus Cutters 3.5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Aggressive Plus Cutters 5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Tomcat Cutters 3.5Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Tomcat Cutters 5 Mm Compatible With Stryker Shaver Instrumentation , Arthroscopic Standard 12 Flute Round Burr Compatible With Stryker Shaver System , Arthroscopic Standard 6 Flute Round Burr Compatible With Stryker Shaver System , Homann Retractor - Assorted Sizes , Osteotomes (Unibody Design) - Straight And Curved - Assorted Sizes , Biodegradable Calcium Sufate Granules (Powder And Liquid) For Antibiotic Delivery - 5 Cc , Biodegradable Calcium Sufate Granules (Powder And Liquid) For Antibiotic Delivery - 10 Cc , Stockinette - Cotton - 100Mm (10 Meters Roll) , Stockinette - Cotton - 200Mm (10 Meters Roll) , Continuous Band Sealing Machine , Xv - Miscellaneous - Plates, Foot & Ankle Implants , 2.4/2.7 Mm Linear Smallmetatarsal Lcp4- 8 Holed , 2.4/2.7 Mm Metatarsal L Oblique Lcp 2-6 Holed Right And Left , 2.4/2.7 Mm Rhomboid Shaped Cuboid Lcpright And Left , 2.4/2.7 Mm Curvilinear Talus Lcp 6 Holed , 2.4/2.7 Mm Curvilinear Lcp With Multiple Central Flanges For Naviculum 7 Holed , 2.4/2.7 Mm Y Shaped Metatarsal Lcp 3-7 Holed , Hindfoot Ankle Arthrodesis Straight Nail With 3 Distal Locking For Calcaneum (3.9/4.9 Mm2 Lateral To Medial And 1 Posterior To Anterior) And 3 Proximal Locking Options ( With One Dynamic Locking ) , 3.5 Mm Rhomboid Plate For Lisfranc Arthrodesis /Tn Arthrodesis , 3.5 Mm Calcaneal Perimeter Plate With Locking Scew Holes Along The Perimeter Of Calcaneumand Two Connecting Bars Between Superior And Inferior Perimeters , 2, 2.5Mm T Plate, L Plate And Straight Plates For Talus Neck Fixation , 2.4/2.7Mm Radial Styloid Plate , 2.4/2.7Mmdistal Radius Column Specific Plates , Rinm Plates , Pi Plates , 2.4/2.7Mm Olecranon Locking Plate , 3.5Mm Mattaplatewith 4 -14 Hole, & Quadri Lateral Plate Extension . The Intrapelvic Acetabularplate Schould Have Pelvic Brim Plate Withmedial Flange For Quadrilatreral Plate Fixation . It Should Be Insertable Through Aip Approach , 2.7 /2.4Mm Distal Ulna Locking Plate , 3.5Mm Proximal Tibia Posteromedial Plate From 4 H To 10 Holes , 4.5Mm Double Angle Blade Plate. The Angle Blade Plate Should Have Multiple Angles, 125-135 And Multiple Bladelengths 50-100. Distal Holes 4 To 12 Holes .Case To Case Basis The Supplier Should Be Able To Provide Sizes Which Is Needed , 2.7Mm Distal Fibula Locking Plate , 3.5Mm Medial Distal Tibia Low Profilelocking Plate From 6 Holes To 14 Holes , 3.5Mm Posterior Malleolus Anatonical Plate , Patella Plates/Basket Plates , 3.5Mm Anterolateral Distal Tibia Plates Of Various Lengths From 4 Holes To 14 Holes , 2.4Mm/2.7Mm 4 Corner Fusion Plate For Wrist , 3.5Mm Proximal Lateral Tibia Plates Of Various Lengths From 4 Holes To 14 Holes , 3.5Mm Pubic Symphysis Plate With 3 Holes On Eiither Side , 4.5Mm Proximal Tibia Low Profile Low Bend Hockey Stickplate 4 To 16 Holes , 95 Degree Angle Blade Plate 4 To 14 Holes , 125/13/135 Degree Single Angle Blade Plate 50 To 100Mm Blade Length .. Plate Length 4 Tio 12 Holes , 3.5Mm Recon Plates 4 Holes To 14 Holes , Locking Recon 3.5Mm4 Holes To 15 Holes , Lcp 4 Hole To 14 Holes 3.5Mmstraight , Semitubular Plate 3.5Mm Locking 4 To 14 Hole , Semitubular Plate 3.5Mm Plain4 To 14 Hole , Dhs Of Angles 125 /130 /135 Degrees From 4 To 8 Holes , Knee Arthrodesis Nail Of Lenth 65 To 90 Mm , 3.5Mm Philos Plate 2 Hole To 10 Hole , 3.5Mm Proximal Tibia Medial T Plate From 4 H To 10 Holes , 3.5Mmposterolateral Extraarticular Humerus Anatomical Lockingj Shaped Hiockey Stick Plate , 2.7Mm/3.5Mm Distal Humerus Anatomical Plates Posterolateral(90/90), Medial , Lateral (Parallel Configuration ) , 2.7/3.5Mm Scapular Lateral Border Anatomical Plates , 3.5Mm Olecranon Hook Plates , 2.7Mm Clavicle Anatomical Plate , 3.5Mm Washer For Screws , 7Mm Washer For Screws , Steinmann Pin 3.5Mm - Length 150Mm , Steinmann Pin 3.5Mm - Length 200Mm , Steinmann Pin 4 Mm - Length 150Mm , Steinmann Pin 4 Mm - Length 200Mm , Steinmann Pin 5 Mm - Length 250Mm , 3.5Mm Ss Lcp - 6,7,8 Holes , 3.5Mm Ss Re-Construction Lcp - 6,7,8 Holes , 4.5Mm Narrow Lcp - 8,9,10,11 Holes , 4.5Mm Broad Lcp - 9,10,11 Holes , 3.5Mm Non-Lockingdcp - 7 Holes , 3.5Mm Non-Lockinglcdcp - 7 Holes , Adult Conical Schanz Pin 4Mm - 30, 40, 50, 60 Threaded , Adult Conical Schanz Pin 5Mm - 30, 40, 50, 60 Threaded , Adult Conical Schanz Pin 6Mm - 30, 40, 50, 60 Threaded , 1.2Mm K-Wirenon Threaded , 2Mm K-Wirenon Threaded , 2.2Mm K-Wirenon Threaded
Basic Detail
Tender No JIP/Pur.6(1)/OeT/Ortho/2024-26
Bidding Type Tender
Location
City Pondicherry
State Puducherry
Key Dates
Publish Date 30 Sep 2024
Submission Date 28 Oct 2024
Open Date 29 Oct 2024
Finance
Tender Value Ref. Documents
Tender Fee 590
EMD 5000
Exemption Available
Document List
73cd73c7-c61f-4e9c-a5d0-d3f4fae7fa70.html
BOQ_870534.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 30, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 28, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 29, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

73cd73c7-c61f-4e9c-a5d0-d3f4fae7fa70.html

xls

BOQ_870534.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders