Tender For Providing And Supplying Spare Parts For All Type Of Borewell As Per Requirment In Bncmc Area 2024-2025, bhiwandi-Maharashtra

Providing And Supplying Spare Parts For All Type Of Borewell As Per Requirment In Bncmc Area 2024-2025- 1 providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2024 2025 2 Item No. 1: Supplying and erecting Heavy Duty G.I. Union in position with necessary material. (MJP Mech CSR 2023-24 PG NO 16 PW-4) (25 mm dia) 3 40 mm dia 4 Item No. 2: Providing and laying in trenches following mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (PWD SSR 2022-2023PG NO 268 41.20,41.21) (25 mm dia) 5 32 mm dia 6 Item No. 3: Supplying G.I. Coupling/ Nipple B class. (MJP Mech CSR 2023-24 PG NO 15 PW-3) (25 mm dia) 7 40 mm dia 8 Item No 4 Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. (PWD ELE CSR 2022-2023 PG NO 220 12-4-8) 9 Item No.5Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C. Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54protection. (PWD ELE CSR 2022-2023 PG NO 220 12-4-20) 10 item no. 6 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU. (PWD ELE CSR 2022-2023 PG NO 141 7-2-9) 11 Item NO 7 : Supplying and erecting minimum Three & above star rated submersible pump set of 3.75KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 120 to 390 LPM discharge at 88 to 26 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP. (PWD ELE CSR 2022-2023 PG NO 213, 12-2-9) 12 Item no. 8 : Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed. (MJP DSR 2023-24 PG NO 128/1/B) (25 mm dia) 13 50 mm dia 14 Item no. 09 Supplying and erecting D.O.L. Starter 400V. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 H.P. (PWD ELE CSR2022-23 PG NO 219/12-4-3) 15 Item no. 10 Providing and fixing following mm dia screwdown bib/stop tap of brass including necessary socketuni on nut complete. (PWD SSR 2022-23/41.40,41.42) (15 mm dia) 16 25 mm dia 17 Item No. 11 : Providing Hand Pump Cylinder Assembly India Mark(Market Rate) 18 Item No. 12 : Providing Hand pump Gl stand assembly. (Market Rate) 19 Item No. 13Providing Water tank assembly. (Market Rate) 20 Item No. 14 :- Providing GI head assembly. (Market Rate) 21 Item No. 15 :- Providing Gun matel upper valve assembly (Market Rate) 22 Item No. 16 Providing Gun matel lower valve assembly. (Market Rate) 23 Item No. 17 - Providing stainless steel plunger rod. (Market Rate) 24 Item No. 18 Providing Reducer cap. (Market Rate) 25 Item No. 19 Providing Gun matel plunger yoke body. (Market Rate) 26 Item No 20Providing upper valve rubber seating Nitrial rubber. (Market Rate) 27 tem No. 21Providing sealing ring (Nitrial rubber) (Market Rate) 28 Item No. 22Providing pump bucket (Leather) (Market Rate) 29 tem No. 23Providing Gunmatel follower (Leather) (Market Rate) 30 tem No. 24Providing Gunmatel check valve guide. (Market Rate) 31 Item No. 25Providing Gunmatel check valve seat. (Market Rate) 32 Item No. 26Providing cylinder body liner (Gunmate) for india mark ii. (Market Rate) 33 Item No. 27:- Providing Galvanised handle bar. (Market Rate) 34 Item No. 28 : Providing Stainless steel handle axle. (Market Rate) 35 Item No. 29Providing SKF Bearing 62042. (Market Rate) 36 Item No. 30 Providing Rollar chain (diamond make) (Market Rate) 37 Item No. 31 Providing Hexagonal Bolt galvanisedmm:Size 12x1.75 x 40. (Market Rate) 38 Item No. 32 :- Providing Hexagonal Nut galvanised Size 12x1.75. (Market Rate) 39 item No 33 : Providing Gl washer M-12-4 mm thickness. (Market Rate) 40 item No 34Providing Hexagonal rod coupling M12 x 15 mm Selved. (Market Rate) 41 item No 35Providing connecting rod 12 mm dia 3 meter length made of bright bar eceiro gaivased toed with couper. (Market Rate) 42 item 36 Providing Head for india mark. (Market Rate) 43 Item No 37 Providing grease (2 Kg pack) (Market Rate) 44 Item No 38 Rewinding of electric motor above 1 HP upto 2 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year. (PWD ELE CSR2022-23 PG NO 280/18-1-9) 45 Item No 39 Rewinding of electric motor above 3 H.P.upto 5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year PWD ELE CSR2022-23 PG NO 281/18-1-11

INR 2360 /-

INR 26976.0 /-

INR 26.97 Lakhs /-