Tender For Repairing Of Internal Electrification In Office Building Farmer Rest House Staff Quarter Type1st 02Nos Type 2Nd 02 Nos Type 3Rd 01 Nos And Cabling Work Sf Of 150Ltr Capacity 01Nos Water Cooler 4Kva Steplizer Cage And Cabling Work At Nmy Roberts

Sharing tender

Tender For Repairing Of Internal Electrification In Office Building Farmer Rest House Staff Quarter Type1st 02Nos Type 2Nd 02 Nos Type 3Rd 01 Nos And Cabling Work Sf Of 150Ltr Capacity 01Nos Water Cooler 4Kva Steplizer Cage And Cabling Work At Nmy Robertsganj, 1 Wiring point for light in 1.5 sq. mm.FRLSHPVC insulated multistrandsingle core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws andcup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directedat site by the Engineer in charge. 174(B) 2 Wiring point for Fan(light duty exhaust fan) in 1.5 sq. mm.FRLSHPVC insulated multistrandsingle core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws andcup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directedat site by the Engineer in charge. 177(B) 3 Same as in item 174(B) but for plug point with 5 Amp flush typeswitch and 3 pin socket and earth continuity wire of1.5 sq.mm. FRLSH PVC insulated multi strand copperconductor cable. 178(B) 4 Add for light / fan points with modular type switch in place of piano type switch. 187(A) 5 Add for plug point with modular switch & socket in place of piano type switch & socket. 187( C) 6 Add for Call bell point with modular type bell push in place of piano type bell push. 187(E) 7 Same as in item 174 (B) but for call bell. 175(B) 8 Supply and fixing of door chime onpolishedMDFEG / Teakplyboard including making connections etc. complete in all respect. 1102 9 Supply and fixing ofwater tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in allrespect. CAT- AAA 1417 10 Supply and fixing ofLED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fittingincluding tube on Surface complete in all respect.CAT -AAA 1413 11 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve 1002 12 S&F of6 Amp. to 32Amp. DP MCB (10 KA) C Curve 1009 13 S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site byEngineer in charge.CAT-A 1022(A) 14 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directedbyEngineer in charge. 1024(A) 15 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA 1421 16 Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect. CAT-AAA 1443 17 Supply and fixing of power plug with 20 Amp./250 voltflush type modular switch and 5 pin 20 A/250 volt flush type universal modular socketswitch on concealed M.S boxincluding supply of all material, labour T&P etc. required for proper completion of work. 1139(A) 18 Supply and Wiring of submains with two nos. of 4 sq. mm.FRLSH PVCinsulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of allmaterial labour and T&P required for proper completion of the work as directed at site by Engineer in charge. 289(A) 19 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sqmm 2 core. 501(A) 20 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 2 core 501(B) 21 Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction ofEngineer in charge. 148(A) 22 S/F of 50mm dia GI pipe DSR 2021 18.10.6 23 S/F of 100mm dia GI pipe DSR 2022 14.13.3 24 Supply & erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint.623 25 Supply & erection of G.I.wire no. 8 to 4 SWG including binding etc. complete in all respect. 628 26 S&F of 100 A. 415 VMetal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. 353 27 Supply of 150 LTR capacity Usha model No. SRA-150150G, SS 304, BIS No. 9159385 with refrigerator having cooling capacity 150 Ltr. With extra large stainless steel body with water tap 2 no. complete in all respects.GEM 28 Supply of 4 KVA Blue Star make stabilizer range 140-280 with plug top complete in all respects.N.S. 29 Supply and fixing of 63 Amp. 415 volts TPN metel clad rewirable type switch fuse unit on angie iron bracket complete in all respects. 316 30 Installation and commissioning of water cooler including comnnection complete in all respects. N.S. 31 Construction of 2 M X 1.5 M X 2.10 M water cooler cage made out of 50x50x5 mm MS angle iron with 10 SWG welded wire mesh of size 1x2 galvanized G.I. sheet of 24 SWG on roof top and side to protect the cooler from rain. The foundation of cage shall be of 0.15 M I 1.2.4 cement concrete base and brick work in 1.6.12 and 4 mm thick and plaster in 1.2.4 plain including painting with aluminium paint. The jcd include supply of all materials labou TP required for proper completion of work.CIVIL SHEDULE 32 Supply and fixing of chlorinated polybinyl chloride CPVCwash out pipe of 40 mm dia CPVC pipe for wastage water drain from water cooler connection complete in all respactDSR 18.9.5 33 Supply and fixing of brass stop cock of approved make complete in all respects.CIVIL DSR 18.16.1 34 Supply and fixing of brass bib cock of approved make complete in all respects.DSR 18.15.1 35 Supply and fixing of uplasticised PVC connection pipe with brass unions 30cm lenth 15mm dia pipe fitting including all matrial complete in all respects.DSR 18.21.1 36 Supply and fixing of chlorinated polybinyl chloride CPVCof 15 mm dia CPVC pipe forwater cooler fittings, clamps including all matrial, Labour etc. Complete in all respactDSR 18.9.1 37 Supply and burying of 40 mm dia x 4.5 meters long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75 mm. apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to apron (and from apron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150 mm. thick alround etc. as per directions of Enginner-in-charge complete in all respects as per drawing. 701 38 Supply and fixing of one number 8 SWG G.I. wire in 15 mm. dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 721 39 S/F of surface/flush mouthing 4 way SPN distributionboard with additional metal door without MCB complete in all respects and as directed at site. CAT A1022 A 40 S/f of pvc sinthaks water tank 1000 Ltr N.S.