|
| 1 | ITEM NO. : 1 Providing and layingcast in situ / Ready Mix Cement Concrete M-25 for double rim bored pile of 535 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With V.S.I. quality Artificial Sand by concrete prepared in reversible drum type concrete mixer by tremie arrangement,compaction of concrete including chipping and dressing etc. complete. (Excluding steel reinforcement)....(INo22-19 , PgNo 162) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 2 | ITEM NO. : 2 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Upto and inclusive of 550 mm diameter including removing and stacking the loose materials etc. complete and disposing of the unserviceable materials outside complete......(INo22-39 , PgNo 169) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 3 | ITEM NO. : 3 Empty boring for 425 to 500 mm dia. bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Spec :(As directed by Engineer in Charge) ....(INo22-51 , PgNo 170) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 4 | ITEM NO. : 4 Chipping and dressing of the R.C.C. piles upto 0.60 meterincluding cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps. Spec : (As directed by Engineer in Charge....(INo22-55 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 5 | ITEM NO. : 5 Providing bentonite slurry process for various diameter of piles vide Item Nos 1 (i to xxiv) above. Spec : (As directed by Engineer in Charge)....(INo22-56 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 6 | ITEM NO. : 6 Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to required diameter and shape ,welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge. Upto 3.00 meter deep liner....(INo22-57 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 7 | ITEM NO. : 7 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. WithV.S.I. quality Artificial Sand,complete.(Excluding steel reinforcement)....(INo22-60 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 8 | ITEM NO. : 8 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc)....(INo25-33, PgNo 180) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B-7,Page No 38.) & (RA NO. : 1) |
| 9 | ITEM NO. : 9 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo25-52, PgNo 181) ( STATE DSR ) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) & (RA NO. : 2) |
| 10 | ITEM NO. : 10 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc)....(INo25-72, PgNo 182) ( STATE DSR ) Item Spec: (Bd.F.8 Page No. 302 and B.7, Page No.38) & (RA NO. : 3) |
| 11 | ITEM NO. : 11 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) ( STATE DSR ) Item Spec: (Bd.F.17, Page No. 306) & (RA NO. : 4) |
| 12 | ITEM NO. : 12 Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction....(INo52-12 , PgNo 423) ( STATE DSR ) Item Spec: (As directed by Engineer-incharge) & () |
| 13 | ITEM NO. : 13 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A. 12 Page No. 264) & (RA NO. : 5) |
| 14 | ITEM NO. : 14 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo24-08, PgNo 176) ( STATE DSR ) Item Spec: (Bd.E.4 Page No. 289 and B-7, Page No.38) & (RA NO. : 6) |
| 15 | ITEM NO. : 15 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.5 Page No. 315) & (RA NO. : 7) |
| 16 | ITEM NO. : 16 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.....(INo32-12, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.8 Page No. 370) & (RA NO. : 8) |
| 17 | ITEM NO. : 17 Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)....(INo51-192 , PgNo 409) ( STATE DSR ) Item Spec: (As directed by Engineer-incharge) & () |
| 18 | ITEM NO. : 18 Providing and applying a Silicon Base Water Repellent Stone Sealers, on Brick / Stone masonry / Concrete surfaces in Two coats by spraying. Including cleaning / sand blasting forremoving dirt / cement mortar patches etc. by force water jet, wire brushing etc. complete.....(INo51-116 , PgNo 383) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & () |
| 19 | ITEM NO. : 19 Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.....(INo50-79 , PgNo 346) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & () |
| 20 | ITEM NO. : 20 Providing & Fixing of FRP (Fibre Reinforced Plastic) Arches as per Architectural Specifications & Requirements.(Rates Collected from Market / Local Vendor)....(INo50-FRP Arches , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-charge) & () |
| 21 | ITEM NO. : 21 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-01, PgNo 173) ( STATE DSR ) Item Spec: (Bd.C.2 Page No. 275) & (RA NO. : 9) |
| 22 | ITEM NO. : 22 Providing & Fixing of Designer FRP (Fibre Reinforced Plastic) Moulding as per Architectural Drawing & Specifications.(Rates Collected from Market / Local Vendor)....(INo51-MOULDING , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-Charge) & () |
| 23 | ITEM NO. : 23 Providing & Fixing of FRP (Fibre Reinforced Plastic) DOME as per Architectural Design & Specifications.(Rates Collected from Market / Local Vendor)....(INo52-FRP Dome , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-Charge) & () |
| 24 | ITEM NO. : 24 Providing & Fixing of 300mm x 450mm FRP (Fibre Reinforced Plastic) Triangular Shaped Carved above parapet wall with scaffolding, finishing, etc. complete.(Rates Collected from Market / Local Vendor)....(INo55-TRIANGULAR , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-Charge) & () |
| 25 | ITEM NO. : 25 Supplying & Fixing LED Acrylic Free Standing Naming as per Architectural Design.(Rates Collected From Market)....(INo54-LED Naming , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-Charge) & () |
| 26 | ITEM NO. : 1 Providing and layingcast in situ / Ready Mix Cement Concrete M-25 for double rim bored pile of 535 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With V.S.I. quality Artificial Sand by concrete prepared in reversible drum type concrete mixer by tremie arrangement,compaction of concrete including chipping and dressing etc. complete. (Excluding steel reinforcement)....(INo22-19 , PgNo 162) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 27 | ITEM NO. : 2 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Upto and inclusive of 550 mm diameter including removing and stacking the loose materials etc. complete and disposing of the unserviceable materials outside complete......(INo22-39 , PgNo 169) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 28 | ITEM NO. : 3 Empty boring for 425 to 500 mm dia. bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Spec :(As directed by Engineer in Charge) ....(INo22-51 , PgNo 170) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 29 | ITEM NO. : 4 Chipping and dressing of the R.C.C. piles upto 0.60 meterincluding cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps. Spec : (As directed by Engineer in Charge....(INo22-55 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 30 | ITEM NO. : 5 Providing bentonite slurry process for various diameter of piles vide Item Nos 1 (i to xxiv) above. Spec : (As directed by Engineer in Charge)....(INo22-56 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 31 | ITEM NO. : 6 Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to required diameter and shape ,welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge. Upto 3.00 meter deep liner....(INo22-57 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 32 | ITEM NO. : 7 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. WithV.S.I. quality Artificial Sand,complete.(Excluding steel reinforcement)....(INo22-60 , PgNo 171) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 33 | ITEM NO. : 8 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc)....(INo25-33, PgNo 180) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B-7,Page No 38.) & (RA NO. : 1) |
| 34 | ITEM NO. : 9 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo25-52, PgNo 181) ( STATE DSR ) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) & (RA NO. : 2) |
| 35 | ITEM NO. : 10 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc)....(INo25-72, PgNo 182) ( STATE DSR ) Item Spec: (Bd.F.8 Page No. 302 and B.7, Page No.38) & (RA NO. : 3) |
| 36 | ITEM NO. : 11 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) ( STATE DSR ) Item Spec: (Bd.F.17, Page No. 306) & (RA NO. : 4) |
| 37 | ITEM NO. : 12 Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction....(INo52-12 , PgNo 423) ( STATE DSR ) Item Spec: (As directed by Engineer-incharge) & () |
| 38 | ITEM NO. : 13 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A. 12 Page No. 264) & (RA NO. : 5) |
| 39 | ITEM NO. : 14 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo24-08, PgNo 176) ( STATE DSR ) Item Spec: (Bd.E.4 Page No. 289 and B-7, Page No.38) & (RA NO. : 6) |
| 40 | ITEM NO. : 15 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.5 Page No. 315) & (RA NO. : 7) |
| 41 | ITEM NO. : 16 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.....(INo32-12, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.8 Page No. 370) & (RA NO. : 8) |
| 42 | ITEM NO. : 17 Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)....(INo51-192 , PgNo 409) ( STATE DSR ) Item Spec: (As directed by Engineer-incharge) & () |
| 43 | ITEM NO. : 18 Providing and applying a Silicon Base Water Repellent Stone Sealers, on Brick / Stone masonry / Concrete surfaces in Two coats by spraying. Including cleaning / sand blasting forremoving dirt / cement mortar patches etc. by force water jet, wire brushing etc. complete.....(INo51-116 , PgNo 383) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & () |
| 44 | ITEM NO. : 19 Providing & Fixing of FRP (Fibre Reinforced Plastic) Arches as per Architectural Specifications & Requirements.(Rates Collected from Market / Local Vendor)....(INo50-FRP Arches , PgNo 901) ( STATE DSR ) Item Spec: (As Directed by the Engineer In-charge) & () |
| 45 | ITEM NO. : 20 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-01, PgNo 173) ( STATE DSR ) Item Spec: (Bd.C.2 Page No. 275) & (RA NO. : 9) |
| 46 | ITEM NO. : 1 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A. 12 Page No. 264) & (RA NO. : 5) |
| 47 | ITEM NO. : 2 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo24-08, PgNo 176) ( STATE DSR ) Item Spec: (Bd.E.4 Page No. 289 and B-7, Page No.38) & (RA NO. : 6) |
| 48 | ITEM NO. : 3 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of (VSI grade finely washed crushed sand ) 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibratoretc. complete.....(INo5-20 , PgNo 44) ( STATE DSR ) Item Spec: (MORTH 410.3.6 & IS 15658 - 2006) & () |
| 49 | ITEM NO. : 4 Providing Heavy Duty Fibre Glass Reinforced Plastic Temporary Barricade of 1.75 m hight, with base width of 430 mm as a provision to accept water ballasting of 101 Itrs-110 Ltrs approx. and arrangement for traffic diversion such as traffic signals during construction at site, for day and night as per requirement. The raw material shall be UV stabilized Linear Low Density Polyethylene and should meet the requirements stipulated in standard IS: 10146-1982, IS:10141-1982 and should also comply to FDA:CFR Title 21.177.1520. Olefin Polymers , with specific FRP Grade 300-104 reinforced during moulding process to the permissible extent for improved impact strength. Qualification Criteria: For qualifying the sample , few tests shall be performed at Government Lab OR NABL Accredited Lab on Site Safety Fence sample, failure or deviations in test results of sample shall be disqualified.The tests and qualifying results are as under, (a) tensile strength at yield by ASTM D 638 =20.93 mPA, (b) Elongation at break ASTM D 638 = 121.66 mPA (c) Flexural Modulus ASTM D 790 = 633.76 mPA (d) Izod Impact Strenth (Notched) ASTM D 256 = 4.41 Kg / Sqm (e) Izod Impact Strenth (Un-Notched) ASTM D 256 = 67.04 Kg / Sqm (f) Drop Impact strength 25 Kg Load from 1 m, 2 m & 5m height the weight of empty single Rotomoulded Plastic Barricade without to fix two brackets at both end in corner for anchoring purpose .each rear bracket is constructed through rod of Dia.60 mm with curvature welded with MS strip of 3 mm thick ,50 mm width and 90 mm length at its top and base ,effective bracket shall be 410 mm approx. the anchoring hole in each bracket shall be 18 mm dia. for routine the MS bolts of 16 mm thickness and 150 mm length with sharp pointed edge at one end .the upper part of each bracket shall have a slot size of 30 mm x 10 mm for connecting it with barracade model through bolts.similarly front bracket for site safety fence is 3 mm thick ,50 mm width, feective height after single bend is 230 mm and anchoring in each bracket shall be dia 18 mm unique safety feature for firm gripping to prevent from displacement and falling when inter connected even without water filling . There shall be 7 no\"s premoulded inserts on site Safety Fence for following application: 2no\"s for safety latches interconnectivity, 2 no\"s for fixing rear brackets for anchoring, one no. at front side for fixing the front bracket for higher stability, and 2 nos on Extension top for holding light brackets / Rod for cloth holding. The plastic barricades has a strong vertical rib of 1740 mm length at the rear centre & 72No\"s of kiss offs spread on entire rear surface , the water container (bottom) For 725 mm height (LType Jersey Barrier ) ,Empty Weight:6.67 Kg/ Rgm,Weight Full : 35.89 Kg / Rgm approx. (After Water / Sand Filling)....(INo50-46A , PgNo 343) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & () |
| 50 | ITEM NO. : 1 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum)....(INo1-J , PgNo 1) ( STATE DSR ) Item Spec: (As Directed By Engineer Incharge) & () |
| 51 | ITEM NO. : 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 52 | ITEM NO. : 2 CONCRETE Concrete Mix Design(With all Tests onbasic materials)....(INo20-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 53 | ITEM NO. : 3 STEEL BAR TESTING Upto 16 mm(Set of 3 Bars)....(INo72-VQC , PgNo 586) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 54 | 18% GST |
| 55 | 1% Labour Cess |
