tender for In order to vacate the house of Bungalow No. 7B situated at Darulshafa Compound, Mr. Ashutosh Tandon has to do the work of interior and exterior whitewashing, painting of the building from above, laying of tiles on the damaged and damaged floors, steel straightening, replacement of damaged doors and window panes and frames of rooms, replacement of damaged glass of cupboard and fitting of bathroom and other necessary civil maintenance works., 1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below DSR15.13.1 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.( For thickness of tiles 25 mm to 40 )D.S.R -15.23.2. 3 Brick work with common burnt clay (non modular) brick of class-150 in superstructue above plinth level up to floor V level in all shapes and sizes in. Cement mortar 1:4 ( 1 cement 4 coarse sand) DSR No-6.4.1 4 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) 5 15 mm cement plaster on rough side of single or half brick wall of mix:4 ( 1 cement 4 coarse sand) DSR13..5 6 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood DSR 9.1.2 7 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneerings with vertical grains or cross bands and face veneers on both faces of shutter :30mm thick including ISI marked stainless steel butt hinges with necessary DSR 9.21.2 8 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 9 Providing and fixing wire gauge shutters using stailess steel wire gauge (grade-304) aperture 1:4 mm 0.50 mm dia wire wire . For doors windows and clerestory windows :35 mm thick shutters of required size UP teak wood. (second class teak wood )(dar-9.27.1.2.1) 10 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work DSR 13.62.1 11 providing and fixing float glass panes.4mm thick glass pane DSR 9.7.7.1 12 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work ( Two or more coat applied @ 1.67ltr/10sqm) on existing cement paint surface ( ace Adv, walmasta) Asian, Berger.DSR(13.111.1) 13 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brandandmanufacturerincludingapplyingadditionalcoatswherever required to achieve even shade and colour ( Old work one or more coats) DSR13.81.1 14 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size600x600mm DSR11.41 15 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perpaintingoffittingsandbrackets,cuttingandmakinggoodthewallswherever required :Kitchen sink without drain board 610x460mm bowl depth200 mm DSR 17.10.2.2 16 providing and fixing p.v.c low level flushing cistern with manually controlled device (handle lever) conforming to is :7231 with all fitting and fixtures complete (10 litre capacity -white )(DSR-17.18.1) 17 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dsr-17.31) 18 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe 32mm dia(17.28.1.1). 19 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (DSR -9.7.8) 20 Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25mm dia(9.46.3) ) 21 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)DSR13.46.1 22 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR13.62.1 23 P/F of partion door shutter with 19 mm plyLaminated including fancy Handle and of Aproved quality including all chargescomplete 24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).D.S.R10.28 25 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red DSR8.2.2.2 26 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.DSR14.3 27 Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean typeW.C. of quality and make as approved by Engineer-in- charge.(17.16A). 28 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge (DSR 1.1.18)
