Tender For Supply And Installation Of 400Amps. 36Ka Four Pole Mccb Including Outdoor Kiosk Panel Board At Nird Campus Substation And Erection Of New Lt Poles, Stut Poles In Place Of Damaged / Fallen Old Lt And Necessary Lt Lines Stringing Near B-13 Quarte
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Oct 2024
0 days left
EMD
2600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rajendranagar → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply and installation of 400Amps. 36KA four pole MCCB including outdoor KIOSK panel Board at NIRD campus Substation and Erection of new LT poles, stut poles in place of damaged / fallen old LT and necessary LT lines stringing near B-13 quarter LT line at NIRD (2nd Call).
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication, Supplying, installation, testing and commissioning of Outdoor type free standing weather & vermin proof flush finish compartmentalized, modular, totally enclosed type Kiosk panel board suitable for operation on 415V, 3 Phase, 4 Wire, 50 Hz, AC supply system, fabricated from MS sheet of 14/16G, free standing floor mounting duly powder coated paint, 415Volts TPN aluminium busbar @ 0.8A/Sq.mm coated with PVC heat shrink sleeves,DMC busbar supports and accessories with 50x6mm aluminium busbar.Diemension of panel 600mm (L) x 500mm (D) x 1325mm (H) including base channel ISMC 75x40mm including removing of existing panel board and installation of new panel board and re-connection of existing incoming / outgoing cables. |
| 2 | a) 400Amps. 36KA four pole MCCB with thermal release, over-current and short circuit -L&T type Db3B-400D / Cat No. CM98403OOROOG - 1 No. (as incomer) |
| 3 | b) Extended rotary operating mechanism Cat No. CM99861OOOO - 1 No. |
| 4 | c) Spreader link - Cat No. ST98066OOOO- 1 No. |
| 5 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. |
| 6 | Above 6.5 metre and upto 8.0 metre |
| 7 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required. |
| 8 | Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required. |
| 9 | Supplying and erection of galvanised \"D\" iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required. |
| 10 | Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required . |
| 11 | Erection of all aluminumconductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required. |
| 12 | Erection of RCC/ PCC pole strut in brick ballast and ramming the foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. |
AI Tender Summary
Tender Timeline
Sep 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 18, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender