Tender For Supply And Installation Of Solar Panel, Led Luminaries With In Built Battery, Mounting Structure And Ac Flood Lights, Of High Mast At Different Locations In The District Of Alipurduar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2024
0 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
alipurduar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Solar Panel, Led Luminaries With In Built Battery, Mounting Structure And Ac Flood Lights, Of High Mast At Different Locations In The District Of Alipurduar
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Installation of 80W Solar Flood Light with Inbuilt LiFePO4 Battery |
| 2 | Supply & Installation of 335Wp Solar PV Module (2 Out) in 27Voc |
| 3 | Supply & Installation of Structure for Mounting 4 Modules of 335Wp including dismanteling the existing structure, Damage Solar panels, all Existing LED lights and battery. The dismantle materials Should be taken by the agency (as less cost for the dismantle Items) and clear the site. |
| 4 | (c) Supply of BIS Certified make in India 200W LED Floodlight made of pressure die cast aluminium housing and heat resistant toughened glass. Rated Supply voltage: 240V, 50Hz AC, System Luminous Efficacy> 110 Lumen/Watt, CRI> 70, CCT: 5700K, PF >0.95, THD< 10%. The Luminaire must have IP66 and IK07 protection. The screws and Connections should be corrosion resistant and must withstood an applied torque of 8Nm for five times. The Luminaire should have Provision for earthing with Earth contact Resistance < 0.5 Ohm and Leakage Current <1 mA. The Insulation Resistance Shall be > 2MΩ on application of 500V DC. The LED Driver is BIS Certified Potted Driver of >85% efficiency with 5KV Internal and 10KV External Surge Protection and Protection from Over Voltage, Short Circuit, Open Circuit and Reverse Polarity. The LED Chip is LM80 Certified OSRAM/ LUMILEDs make LED Chip with free all photobiological hazards and a burning hours of L70@50000 Hours. Conforming Standards: IS 10322(Pt.5/Sec.5)-2013. IS 16103 (Pt.1& Pt.2):2012, IS 16104:2012, IS 16105:2012, IS 16107(Pt.2/Sec. 1):2012, IEC 60598, IEC 61347-2-13, IEC 62384 & 62031, LM79. |
| 5 | b) Supply, installation, testing & commissioning of Outdoor type dust and vermin proof powder painted Sub Panel board having fixed with front side double door with railway type locking arrangement suitable 415V 3 phase, 4 wire 50 Hz AC supply made out of 2 mm thick MS sheet so asto accommodate the following mountings complete with bus bar of 315 Amp capacity & channel base at the bottom connection & interconnection by copper wire & strip along with necessary nuts & bolts complete as reqd. (Make-L&T/Siemens/ABB make).a) 32A 415 Volt 4P MCB-1 nob)63 Capacity 415 Volt 4 bar AL busbar of bars size 50mmX10mmX1mtr c) 6-20A 415 Volt TP MCB-2nod)6-20A 250 Volt DP MCB -2 nose)ANALOG TIMER - 1nof)32 A 4 POLE CONTRACTOR AND 3 A SP MCB FORCOIL SUPPLY-1 nog)AUTO MANUAL SELECTOR SWITCH-1 no j) 0-500 digital Voltmer-1 nok) LED Indicating Lamp -3 nol)Caution board-1 no |
| 6 | Supply offollowing size 1.1 KV grade PVC/ Aluminiumcable conductor in U.G with proper brick protection including earthing attachment as per G.S.4core 10 sqmm |
| 7 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 8 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4core 10 sqmm |
| 9 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :4core 10 sqmm |
| 10 | Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required |
| 11 | Excavation of soil for installation of Earth Electrode and filling & ramming.(a) For Soft Soil |
| 12 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe |
| 13 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
AI Tender Summary
Tender Timeline
Sep 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender