|
| 1 | Earth work in excavation : Labour only for earth work in excavation in foundation, in foundation trenches, not exceeding 1.5 m wide and not exceeding 1.5 min depth getting out in hard or dense soil as ordered by EIC/SIC. |
| 2 | Sand filling : M & L for providing sand filling in foundations including watering and consolidation all complete as ordered by EIC/SIC. |
| 3 | Removal of spoil: Labour only for removal of spoil mixed with excavated earth, broken bricks, concrete rubbish and debris, broken glasses, cut pieces of tarfeltetc, from work site to a distance of 1.50 km. outside the factory or as directed by the EIC/SIC (20% deduction in measurement will be made from the volume of spoil ). |
| 4 | R.C.C (1:1.5:3): M & L for providing reinforced cement concrete type M-20, 1:1.5:3 mix (using 20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc.as ordered by EIC/SIC. |
| 5 | P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix ( using 20 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor as ordered by EIC/SIC. |
| 6 | Brick work(1:6): M & L for brick work with old size subclass\"B\" bricks, straight or curved on plan exc 6m mean radius with (1: 6) cement morter as ordered by EIC/SIC. |
| 7 | Half Brick thick Brick work (1:4 CM): M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in (1: 4) cement morter as ordered by EIC/SIC. |
| 8 | Cutting holes: Labour only for cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete Exc 150 sq. cm but n exc 400 sq. cm ,completeas ordered by EIC/SIC. |
| 9 | Form work :Labour only for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as ordered by EIC/SIC. |
| 10 | Taking down frames with shutters : Labour only taking down door / window frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each and removing the same to store as ordered by EIC/SIC. |
| 11 | Repairing of shutters : Repairing of door or window shuttersexc. 2 sqm. of any description by necessary cutting, easing, adjustng, repairing all complete and all as ordered by EIC/SIC. |
| 12 | PVC doors frame :S & F ofsolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as ordered by EIC/SIC. |
| 13 | PVC door shutter: S & F ofFactory made solid panel PVC door shutter[make:Rajshri / Sintex/ polyline or substantialy equivalent ] 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including two nos. of steel tower bolt of very good quality of& one PVC handle in every single shutter as ordered by EIC/SIC. |
| 14 | Aluminium tower bolt 150 mm long :S & F of150 mm long aluminium anodised barrel tower bolts of extruded section and fixed as ordered by EIC/SIC. |
| 15 | Butt hinge : S & F of 75 mm long butt hinges medium weight cold rolled mild steel and fixed as ordered by EIC/SIC. |
| 16 | Reinforcement : M & L for providing reinforcementwork with TMTmild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc.complete as ordered by EIC/SIC. |
| 17 | MS small articles : S & F for providing mild steel straps, clamps, chain, hold fasts etc, as small articles, to be fixed in position as required as ordered by EIC/SIC. |
| 18 | Glazed tiles :M & L for fixing only glazed ceramictiles in vertical surface, area of each tiles equal notexceeding 0.1575 sqm having thickness of 7mm or more ofapproved colour (Make:Kajaria / Jhonson /Orient or substantialy equivalent make) set and jointed in neat cement slurry and pointed in white/colour cement to match, all complete as ordered by EIC/SIC. |
| 19 | Non skid flooring : S & FNon - skid Ceramic tiles non skid joint free coloured ceramic tiles (Make: Johnson / Kajaria / Orient bell or substantialy equivalent) 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as ordered by EIC/SIC. |
| 20 | Roughening of cement concrete floor/wall : Labour only for roughening of old cement concrete floor / wall /roof by picking, sweeping, cleaning and washing down with water to remove dust etc. as required and as ordered by EIC/SIC. |
| 21 | Dismantling oftiles : Labour only for dismantling floor, hearth or wall tiling including cement mortarbedding removing serviceable tiles to store of BM Section and rubbish off the premises etc complete as ordered by EIC/SIC. |
| 22 | Screed bed of 20 mm: M & L for providing bedding screed bed of 20 mm thick in cement mortar ( 1:6) etc. after taking out existingfloor finish material (if any), complete in all respect as ordered by EIC/SIC. |
| 23 | Taking down plastering : Labour only for taking down cement or cement lime plaster of any description, flush pointing, any painting etc. from brick wall including raking out joints, hacking for key, scrubbing down with water etc. complete as ordered by EIC/SIC. |
| 24 | Cement plaster(1:6): M & L for providing 12 mm thick cement plaster 1:6 mixon fair faces of brick work or concrete surfaces at any height as ordered by EIC/SIC. |
| 25 | Cement plaster in ceiling(1:6): M & L for providing 12 mm thick cement plaster 1:6 mixon fair faces of brick work or concrete surfaces in ceiling at any height as ordered by EIC/SIC. |
| 26 | Cement paint : M & L for applying two coat of cement paint on after necessary preparation ofwall surfaces of any description as ordered by EIC/SIC. |
| 27 | White washing : M & L for applying two coats of white washing with blue tint on wall surfaces of any description after necessary preparation of the same as ordered by EIC/SIC. |
| 28 | Washable distempering: M & L for applying two coat of washable distemper of 1st quality; make: Asian / Berger / ICI or substantialy equivalent, and approvedshade after necessary preparatory work and primer of the surfaces complete all as ordered by EIC/SIC. |
| 29 | Wall care Putty: M & L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.as specifiedafter complete removal of existing treatmentcomplete allas ordered by EIC/SIC. |
| 30 | Frosted Sheet glass : M & L for providing frosted on one side sheet glass 3 mm thickness, of any size and shape, any height glazed with oil puttyof approved makeall complete and all as ordered by EIC/SIC |
| 31 | Hacking out old broken glass : Labour only for hacking out old broken glass any thickness, size, quality or description from frames including punching or drilling out old glazing pins, spring clips and providing and fixing new ones all as complete and as ordered by EIC/SIC |
| 32 | Wood painting single coat: M & L for applying single coat of synthetic enamel paint finished glossy of 1st quality; make: Asian / Berger / ICI or substantially equivalent make, and shade over old surfaces after necessary preparationwood surfaces of any description over 10 cm width or girth as ordered by EIC/SIC. |
| 33 | Plastic paint: M & L for applying two coat of plastic emulsion paint of 1st quality;Asian / Berger / ICIor substantially equivalent make and approvedshadeon wall and ceiling surfaces over 10 cm width or girth after necessary preparation of surfaces and primingas ordered by EIC/SIC. |
| 34 | Steel painting single coat : M & L for applying one coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make, and approvedshade after necessary preparation of old decorated steel surfaces of any description over 10 cm width or girth as ordered by EIC/SIC. |
| 35 | Tapping point including ferrule : M & Lfor providing drilling and tapping cast iron/DI water mains (in position) for branch connections of 15 mm internal dia. including straight plain brass ferrules (or connecting screws) screwed both ends and fixed as ordered by EIC/SIC. |
| 36 | Taking up & down GI pipe :Labour only for taking up or down steel tubing and connections of 15mm dia.including cleaning for re-fixing or removal to store ordered by EIC/SIC. |
| 37 | Taking up & down GI pipe :Labour only for taking up or down steel tubing and connections of 20mm dia.including cleaning for re-fixing or removal to store ordered by EIC/SIC. |
| 38 | Taking up & down GI pipe :Labour only for taking up or down steel tubing and connections of 25-32mm dia.including cleaning for re-fixing or removal to store ordered by EIC/SIC. |
| 39 | Refixing old steel tubing: Labour only for refixing 25-32mm dia. old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) as ordered by EIC/SIC. |
| 40 | Refixing old steel tubing: Labour only for refixing 20mm or 15mm dia. old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) as ordered by EIC/SIC. |
| 41 | UPVC pipe 40mm dia.:S & F of 40 mm bore dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2of Supreme / Oriplust/ Finplex or substanstially equvalent make laid in trenches or wall including all fittingsalso cutting, screwing etc.complete as ordered by EIC/SIC. |
| 42 | UPVC pipe 25 mm dia : S & F of 25 mm bore dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laidof Supreme / Oriplust/ Finplex or substanstially equvalent make or fixed in proper positionincludingall pipe fittingslaying in trenches and also cutting, screwing and waste complete as ordered by EIC/SIC. |
| 43 | UPVC pipe 20 mm dia : S & F of 20 mm bore dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2of Supreme / Oriplust/ Finplex or substanstially equvalent make laid or fixed in proper positionincludingall pipe fittingslaying in trenches and also cutting, screwing and waste.complete as ordered by EIC/SIC. |
| 44 | UPVC pipe 15 mm dia : S & F of 15 mm bore dia Unplasticised PVCipes of pressure rating 10 kgf/cm2 ofSupreme / Oriplust/ Finplex or substanstially equvalent make laid or fixed in proper positionincluding all pipe fittings laying in trenches and also cutting, screwing and waste complete as ordered by EIC/SIC. |
| 45 | Bib taps fancy type : S & FBib taps of fancy type cromium plated of reputed brand screwed for iron pipe or for brass and fixed, size of tap 15 mm bore dia. as ordered by EIC/SIC. |
| 46 | Stop valves 25 mm dia: S & F of 25 mm dia Stop valves ( Make: NETA / ZOLOTO / ALTO or substantially equvalant), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedin proper position complet as ordered by EIC/SIC. |
| 47 | Push tap: S & F of push tap of any colour high pressure of PTMT screwed for iron pipe suitable for urinals and water point, (Minimum weight 15mm-50gms) and fixed after taking old damaged tap, complete all as ordered by EIC/SIC. |
| 48 | Bib taps : S & F of Bib taps of PTMT, any colour high pressure screwed forpipe of 15mm dia.(Minimum weight of bib tap: 15mm-90gms) and fixed after taken out of old damaged bip tap complete all as ordered by EIC/SIC. |
| 49 | Stop valves 15mm dia: S & F of 15 mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms ) Make: Prayag/Supreme/NITA or substantially equivalantall complete as ordered by EIC/SIC. |
| 50 | Stop valves 20mm dia: S & F of 20 mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 20mm - 92gms ) Make: Prayag / Supreme / NITA or substantially equivalantall complete as ordered by EIC/SIC. |
| 51 | Angle stop valve PTMT: S & F of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight of valve 15mm-90gms) after taken out of old damaged valve, complete all as ordered by EIC/SIC. |
| 52 | Waste coupling of PTMT: S & F of Waste coupling of PTMT(half or full threaded) suitable for urinals, (Minimum weight32mm-45gms) complete all as ordered by EIC/SIC. |
| 53 | Towel rail PTMT : S&F of Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. complete as ordered by EIC/SIC. |
| 54 | PVC connections 300mm : S & F of PVC connections 15mm size with PTMT nuts of length 300mmas ordered by EIC/SIC. |
| 55 | PVC connections 600mm : S & F of PVC connections 15mm size with PTMT nuts of length 600 mmas ordered by EIC/SIC. |
| 56 | PVC pipe 110mm dia : S & F of 110mm dia. bore PVC (SWR) pipes single socketed[Make: Supreme/ Oriplast,/ Finolex or approved] in any length with rubber ring joints, laid in wall (existing old SWR pipes have be dismanted if required), trenches or in floors as ordered by EIC/SIC. |
| 57 | PVC bends 110mm dia: S & F 110mm dia. PVC (SWR) bends any radius to be fixed in position as ordered by EIC/SIC. |
| 58 | Commode : S & F for providing vitreous china water closet pan, wash down, padestal pattern (commode), white,including \"p\" or \"s\" trap. Make: Hindware/ Parryware / CERA or Substantially equivalent , and with seat cover after taking out old w/c, complte as ordered by EIC/SIC. |
| 59 | Commode seat cover: S & F plastic water closet seat ,closed pattern with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device,complete in all respect as ordered by EIC. |
| 60 | Water closet : S & F for providing vitreous china water closet pan (Orissa pattern) Make: Make: Hindware/ Parryware / CERA or Substantially equivalent, size 580 x 440 mm , with integral foot rests, including 75 mm diatrap,flushing pipe, anti-syphonage pipe etc. after taking out existing old water closet including making good to floor all complete as ordered by EIC/SIC. |
| 61 | Bowl urinal : S & F of Vitreous Chinabowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and Union for discharge pipe with grating and union/funnel for discharge pipe of suitable dia. Make: Hindware/ Parryware / CERA or Substantially equivalent; [after taking out old damaged urinal pot if any] complete as ordered by EIC/SIC. |
| 62 | Fixing Bowl urinal :Fixing only of Vitreous China used bowlurinal of any type and size after taking out it in the same or other position bymin. 60mm long brass screws, cement mortar complete as ordered by EIC/SIC. |
| 63 | Flushing cistern: S & F of P.V.C valveless syphonic action type, flushing cistern Make: Hindware / Neycer / Parryware or substantially equivalent 10 ltrs. capacity, low level, white with inlet, ball valve, float and handle including flush pipe of polythene of low or high density or PVC tube 32 mm dia. for low level cistern and brackets with PVC connections 15 mm size with PTMT nuts of length 450mm long with angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) fixed in position, (after taking out old/existing flushing cistern if any of any description ) complete as ordered by EIC/SIC. |
| 64 | Wash basin with all fittings : S & Fvitreous china wash basin, white size 630 mm x 450 mm, of Parryware/Neycer /Hindwareor substantialy equivalent make with all fittings & accessories, such as basin waste coupling of PTMT32mm dia. with PVC waste pipe and 300mm length 15mm dia PVC. connection pipe, 15 mm bore dia brass chromium plated pillar taps, angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed and also two brackets or erecting stands if required etc.(after taking out old/existing flushing cistern if any of any description ) all complete set and work as specifiedand as ordered by EIC/SIC. |
| 65 | Fixing only Wash basin with all fittingsFixing onlyvitreous china wash basinof any type after taking out & repairing the same in the same or other position complete as ordered by EIC/SIC. |
| 66 | Health faucet: S & F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 67 | Mirror : S & F of600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washeras ordered by EIC/SIC. |
| 68 | Squatting plate urinal: S & F Vitreous china squatting plate urinal white as ordered by EIC/SIC. |
| 69 | Single brick flat soling : M & L for providing single brick flat soling with well burnt soling brick including filling of interstices with white sandas ordered by EIC/SIC. |
| 70 | Dismantling of brick work: dismantling brick work or stone/boulder masonry of any typebuilt in cement morter including all quoins, arches, pillars etc as order by EIC/SIC. |
| 71 | Demolition of PCC : labour only for demolition of cement concrete of any description and in any position and removing the same out off the work site as orderd by EIC/SIC. |
| 72 | Demolition of RCC : Labour only for demolition of reinforcedcement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position and removing the same out off the work site as orderd by EIC & SIC. |
| 73 | Dismantling steel work : Labour only for dismantling wrought iron or mild steel work of any description and in any position and removing the same to store or as directed by the EIC/SIC. |
| 74 | Waste pipe: Providing and fixing min. 25 mmdia. flexiablePVC. waste pipe for sink / wash basin etc. complete as ordered by SIC/EIC. |
| 75 | Repairing ofCistern:M & Lforcomplete replacement of the inner parts (like : float valve, lever, flush pipe, check nuts, inlet valves etc.)of PVC cistern and refixing the complete unit i.e PVC Cisternafter make it functional ( angular gate valve and connector pipes if required will be paid seperately) complete all as ordered by SIC/EIC. |
