Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Supply and fixing in replacementonly of unserviceablegun metal gatevalve with iron wheel head screwedboth ends for iron pipe, ISI markedof followingsizes complete all as specified and directed.(Note:- Old U/s material obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of gun metal gate valve in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 2 | 15 mm bore |
| 3 | 20 mm bore |
| 4 | 25 mm bore |
| 5 | Supply & Fixing in replacement old unserviceable HDPE pipe of Pressure Rating 10 Kgf/cm2 laid in trenchesincluding all fixture/fittings complete all as specified and directed.(Note:- (i) Excavation & earth work shall be measured and paid seperately under respective items of BOQ.(ii) Old U/s material HDPE pipe obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 6 | 100 mm bore |
| 7 | 150 mm bore |
| 8 | S&F in replacementof old unserviceable pipe with PP-R Pipe 3 layer PP-R (Polypropylene random copolymer) concealed pipe SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random(PPR) fittingcomplete to walls, ceiling, or floor or laid in trenches of following sizes complete all as specified and directed by Engineer-in-charge(Note:- (i) Excavation & earth work shall be measured and paid seperately under respective items of BOQ.(ii) Old U/s material PVC scrap obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 9 | 16 mm bore |
| 10 | 20 mm bore |
| 11 | 25 mm bore |
| 12 | 40 mm bore |
| 13 | 50 mm bore |
| 14 | 63 mm bore |
| 15 | 75 mm bore |
| 16 | 90 mm bore |
| 17 | 110 mm bore |
| 18 | 160 mm bore |
| 19 | S&F in replacement of old unserviceable UPVC pipe of 150mm bore of pressure rating 10 kgf/ cm2 laid in trenches including all fitting complete including all accessories complete all as specified and directed.(Note:- Old U/s material UPVC pipe obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 20 | Boring holes under road pavement manually in any type of soil upto 200 mm bore complete all as specified and directed.(Note:- Depth of boring from GL shall be as directed by EIC as per site requirement) |
| 21 | Supply & Fixing PP-R Gate valves (brass insert) as per requirement of the site of following size in replacement complete all as specified and as directed.(Note:- Old U/s PPR gate valve obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of plastic scrap in(KG) shall be taken into account and attach with RAR/F Bill) |
| 22 | 20 mm bore |
| 23 | 25 mm bore |
| 24 | 50 mm bore |
| 25 | 63 mm bore |
| 26 | 75 mm bore |
| 27 | 90 mm bore |
| 28 | Supply & Fixing in replacement of old unserviceable GI tubing medium grade with all fitting laid in trenches for bore of pipe of following sizes complete all as specified and directed.(Note:- (i) Excavation & earth work shall be measured and paid seperately under respective items of BOQ.(ii) Old U/s material GI pipe obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 29 | 15 mm bore |
| 30 | 20 mm bore |
| 31 | 25 mm bore |
| 32 | 50 mm bore |
| 33 | 80 mm bore |
| 34 | Supply & Fixing in repair of Piano type switch flush type, 5 Amps single pole, one way, 240Volts complete all as specified and as directed |
| 35 | Supply & Fixing in repair of Piano type switch, flush type, 15 Amps single pole, one way 240Volts complete all as specified and as directed |
| 36 | Supply & Fixing in repair of Switch socket outlet2 in 1,3 pin 5 Amps flush type, single pole, 240Volts complete all as specified and as directed. |
| 37 | Supply & Fixing in repair of Switch socket out let 2 in 1,5 pin 15 Amps flush type, single pole 240Volts complete all as specified and as directed.(Note For Item No 08 to 11:- Old U/s material obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of PVC Scrap in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 38 | Supply & Fixing in repair of FRLS PVC insulated multistranded copper conductor cable of size 1.5 sqmm, single core 1100 volts grade complete all as specified and as directed. |
| 39 | Supply & Fixing in repair of FRLS PVC insulated multistranded copper conductor cable of size 2.5 sqmm, single core, 1100 volts grade complete all as specified and as directed. |
| 40 | Supply & Fixing in repair ofFRLS PVC insulated multistranded copper conductor cable of size 4 sqmm, single core, 1100 volts grade complete all as specified and as directed.(Note For Item No 12 to 14:- Old U/s material copper wire obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of copper Scrap in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 41 | Supply, Installation & testing of LED tube light fitting integral type suitable for 1 x 20 watts, 230 Volts, connector block etc with all accessories internally prewired and including connecting with twin core flexible copper cable of suitable size including taking down/out fitting as existing at site complete all as specified and directed. |
| 42 | Supply, Installation & testing of LED street light Fitting 70 watt 230 V AC outdoor type, IP-66 protection, with hiigh pressure die cast aluminiumhosing including lamp bracket and angle with 3 core 1.5 sqmm PVC insulated cable including taking down of existing street light fixing complete all as specified and directed.(Note For Item No 15 to 16:- Old U/s material fitting obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of iron scrap in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 43 | Supply and fixing in replacement of PVC insulated, sheathed unarmoured Copper conductor flexible cable of size 10 sqmm single core, round flexible, 1100 volts grade complete all as specified and directed. |
| 44 | Supply and fixing in replacement of submersible copper cable of size 10 sqmm 4 core 1100 volts complete all as specified and directed. |
| 45 | Supply and fixing in replacement of submersible copper cable of size 6 sqmm 4 core 1100 volts complete all as specified and directed.(Note For Item No 17 to 19:- Old U/s material copper cable obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of copper in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 46 | Supply & laying in replacement XLPE insulated PVC sheathed heavy duty underground cable with aluminium multi stranded conductorwith armoured 1100 volt grade including provision of route indicators as specified of following sizes laid in trenches /duct , wall connecting and testing complete all as specified and directed:-(Note :- (i) Old U/s material cable obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of aluminium scrap in weight (KG) shall be taken into account and attach with RAR/F Bill.(ii) Excavation & earth work, sand cushioning & brick protection shall be measured and paid seperately under respective item). |
| 47 | 16 sqmm 4 core |
| 48 | 25 sqmm 3.5 cree |
| 49 | 35 Sqmm3.5 core |
| 50 | 50 Sqmm3.5 core |
| 51 | Supply and fixing in replacementof burnt/ unsv 3 pole power contactor Type MNX 25, 110 Amp, 415/220 volts ,50 hz coil voltage 415 volt complete all as specified and directed. |
| 52 | Supply and fixing in replacement of burnt/unsv 3 pole power contactor Type MNX 32, 110 Amp, 415/220 volts ,50 hz coil voltage 415 volt complete all as specified and directed. |
| 53 | Supply and fixing in replacement of thermal over load relay type MN relay range 28-42 Amps complete all as specified and directed. |
| 54 | Supply and fixingin replacement of burnt/unsv thermal over load relay type MN relay range 20-32 Ampscomplete all as specified and directed. |
| 55 | Supply and fixing in replacement of burnt/unsv thermal over load relay type MN relay range 13-21 Ampscomplete all as specified and directed. |
| 56 | Supply and fixing in replacement of burnt/unsv MCB single pole 6 to 32 Amp 240 volts complete all as specified and directed. |
| 57 | Supply and fixing in replacement of burnt/unsv 3 pole power contactor type ML-4,70 Amps, 415 volts ,50 hz coil voltage 415 voltcomplete all as specified and directed. |
| 58 | Supply and fixing in replacement of burnt/unsv 3 pole power contactor type ML-3,40 Amps, 415 volts ,50 hz coil voltage 415 voltcomplete all as specified and directed. |
| 59 | Supply and fixing in replacement of burnt/unsv 3 pole power contactor type ML-2,32 Amps, 415 volts ,50 hz coil voltage 415 voltcomplete all as specified and directed. |
| 60 | Supply and fixing in replacement of burnt/unsv moulded case circuit breakers 3 pole 200 Amps TP 415 volts, 50 hz 36 KA complete all as specified and directed |
| 61 | Supply and fixing in replacement of old burnt/unsvmoulded case circuit breakers 3 pole 100 Amps TP 415 volts 25 KA, 50HZ complete all as specified and directed.(Note for ser item No 21 to 31 :- Old U/s material obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of iron scrap in weight (KG) shall be taken into account and attach with RAR/F Bill. |
| 62 | Supply & fixing including fabrication, welding of MS frames in replacement made out of MS angle/flat of any size as required at site for repair/replacement of valve pit cover/sump man hole cover, stair case step, equalization and cholorine contact tank boundary, and all other iron works including painting two coats with synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.(Note:- Old U/s material MS frame obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 63 | Supply and fixing in replacement of 15 mm bore Bib tap standard of PTMT weight not less than 75 gram any colour high pressure screwed for male/female threaded for any pipe complete all as specified and directed.(Note:- Old U/s material bib tap obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of plastic scrap in weight (KG) shall be taken into account and attach with RAR/F Bill) |
| 64 | Supply and Fixing in replacement of old unsv CI Foot valve offollowing size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. Note (i) :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items.(ii) Old unserviceable material shall be taken on charge and enter in demolition / salvage register in \"EACH\" and attach the same page of salvage register with each RAR.) |
| 65 | 80 mm dia |
| 66 | 100 mm dia |
| 67 | Supply, installation and testing in replacement of unserviceable flanged ends Water Meterwoltman type, including testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc ISI Marked fixing in horizontal/incline/vertical position,including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge. (Note:- (i) Flange Joints Including Jointing material shall deemed to be included in the unit rate of this item.(ii) Old U/s water meter obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of water meter in number (EACH) shall be taken into account and attach with RAR/F Bill) |
| 68 | 100 mmbore |
| 69 | 150mmbore |
| 70 | Supply and fixing Fully automatic star-delta (FASD) starter in sheet metal enclosure with voltmeter and amp meter.Each motor rating 415 V 3 phase 50 hz for submerisible pump of following size complete all as specified and directed.(Note :- Old U/s material FASD obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of iron scrap in weight (KG) shall be taken into account and attach with RAR/F Bill. |
| 71 | FASD 7.5 HP |
| 72 | FASD 10 HP |
| 73 | FASD 20 HP |
| 74 | Material and labour for painting of steel and iron surfaces withapplying two coat of synthetic enamel paint over a coat of red oxide primer as per existing pattern including rubbing down & removing old painted surface clean complete all as specified and as directed. |
| 75 | M&L for applying two coat of distempering over walls with oil bound distemper including preparation of wall surfaces after washing, rubbing down & filling of cracks with Birla care putty not less than 1.5 kg/sqm including necessary scaffolding work etc. complete all as specified and directed |
| 76 | M&L applying snowcem over walls of pump house & UG Sump with two coat of cement base paint including writing letters and preparation of wall surfaces after rubbing, washing & filling of cracks with Birla Care putty not less than 1.5 kg/sqm as directed by Engineer-in-charge on Wall/Sump and necessary scaffolding work etc. complete all as specified and directed |
| 77 | M & L for preparation of old surfaces of LT steel tubular poles of any size and type with bracket clamps etc and painting with two coats of Aluminium paint upto 6 mtr long and exposed surface of Pole yellow and black paint in strips alternative 30 cm wide ipto 1.5 mtr from ground level including marking of pole No\"s with paint complete all as specified and as directed. |
| 78 | M&L for re-painting of LT Panels/feeder pillars of approx size 6 to 12 Sqmwith 2 coats syenthic of super enamal paint over a coat of red-oxide with sparygun including writing letters on feeder pillar in appropriate size as directed by Eng-in-charge complete all as specified and as directed. |
| 79 | Labour for dismantling, disconnecting the Air Blower twin lobe positive displacement type of pressure upto 0.8Kg/Cm2 and capacity upto 800 Cum/hr includingdisconnecting from chanel frame and electrical panel for repair of Gear Box, refitting of gear box after oiling, greasing, alingment of pump set and re-fixing/ assembling testing to make it functional complete inciuding cleaning of all dirt, dust replacing the Air Filter with similar type and make of New filter etc including transportation to workshop for repair complete all as specified and directed by EIC. |
| 80 | Supply and fixing in replacement following spare parts in the twin lobe positive displacement type and pressure rating upto 0.8Kg/cm2 of of existing make as per site:- |
| 81 | Replacement of Pully V Belt SPB-1800/existing at site |
| 82 | Ball Bearing 6311/C3 |
| 83 | Roller bearing 3213A or existing at site |
| 84 | Set of Gasket of suitable size for the compressor existing at site |
| 85 | Gear set of suitable size for the compressor existing at site |
| 86 | Oil seal of suitable size for the compressor existing at site |
| 87 | Oil level glass of suitable size for the compressor existing at site |
| 88 | Suction air filter of suitable size/type for the compressor existing at site |
| 89 | Air compressor shaft welding , turning , grindingrequired during overhauling of compressor |
| 90 | Bearing tapper bush for roller bearing 22213 EK/C3 or of suitable size for the compressorexisting at site |
| 91 | Outer distance bush of suitable size for the compressor existing at site |
| 92 | Pressure ring of suitable size for the compressor existing at site |
| 93 | Asbestos graphite packing(casing cover) of suitable size for the compressorexisting at site |
| 94 | Asbestos graphite packing(stuffing box) of suitable size for the compressorexisting at site |
| 95 | Supply & pouring of new fresh Compressor Oil in air blower at STPs in sealed container of make CASTROL complete all as specified and directed.(Note for ser item No 43.01 to 43.15 :- Old u/s material will contractor\"s property and accordingly unit rate will quoted in BOQ). |
| 96 | Disconnecting electric connections from LT control pannel and starter of Non clogging submersible pump setof any size 3 HP to 12.5 HP and removing the pipe line connections from discharge side and taking out sub pump set alongwith, column pipe from Sewage sump/Well/Tank etc with the help of chainpullyincluding transportion to wksp for repair includingreplacement of rusted nuts bolts rubber gasket complete all as specified and directed. NOTE:-1.The quoted rates will include for the charges wherever hydra is required for pulling out the pumps out.2. The contractor will give a guarntee for 6 months for the proper functioning of the pumps and its allied pipe connections/Electrical connections.3. Burn out/Defective Non clogging pumps/Submersible pumps will be open at site for the defects and material required for replacement in writing to Engr-in-Charge. |
| 97 | Labour for opening thenon clogging sub pump set, repairing, rewinding and assembling the pump set including insulating material of any size 3HP to 12.5 HP capacity complete all as specified and directed(Copper winding wire and other spare part required for repairing will be measured and paid under relevant item as supply only) by Engr-in-charge.(Note:- Old copper winding wire shall be contractor\"s property and accordingly rate of supply only copper winding under item No 46 of BOQ will be quoted). |
| 98 | Supply only copper rewinding wire of exsting gauge for non clogging pump sets/ submersible pump Sets/ Induction motors complete all as specified and directed.(Note :- (i) Cost of transportation upto workshop for rewinding of pump set will deemed included in quoted unit rate.(ii) Old copper winding wire obtained from dismentling will be contractor\"s property. Unit rate will deemed included cost of old copper binding wire obtained from dismentling of pump). |
| 99 | Supply only in replacement of following spare for non clogging sub Pump set cap 3 HP to 12.5 HP complete all as specified and directed |
| 100 | SS roter sleeve of existing at site |
| 101 | SS roter shaft ASS 410or of existing at site |
| 102 | Water seal of existing at site as per pump design |
| 103 | CI Lower Housing chamber of existing at site |
| 104 | CI upper housing chamber of existing at site |
| 105 | Connetion plate of existing at site |
| 106 | Remetaling of rotor & turning/grinding |
| 107 | Gun Metal suction ring of existing at site |
| 108 | Gun Metal Impeller of existing at site |
| 109 | Stainless Steel stud with nutof existing at site |
| 110 | Impeller nut as per existing at site |
| 111 | Impeller key asper existing at site |
| 112 | Jointing kit of submersible cable any size. |
| 113 | CI suction chamber perfectly suitable as per existing at site |
| 114 | Repairing of stamping of stator |
| 115 | Mechanical seal set upper and lower |
| 116 | Jointing of cable kit without float switch |
| 117 | Jointing of cable kit with float switch |
| 118 | CI suction plate as per existing at site |
| 119 | O ring set as per existing at site |
| 120 | Insulation kit as per sample |
| 121 | Ball bearing 6306ZZ |
| 122 | Roller Bearing 3308 |
| 123 | Roller Bearing NU 305 |
| 124 | Temperature sensor as perexisting at site |
| 125 | Moisture sensor as per existing at site(Note for item No 47.01 to 47.26:- Old u/s material will contractor\"s property and accordingly unit rate will be quoted in BOQ by contractor. |
| 126 | M&L for applying of two coat of synthetic enamel paint over a coat of red oxide primer after preparation of steel surfaces of submersible pump set/connections etc by rubbing including welding on damage portion of steel surfaces complete all as specified complete all as specified amd directed by Eng-in-charge. |
| 127 | Labour for dismantling, disconnecting the centrifugal/sewage pump set from foundation and fixing after repairing rewinding and assembling the pump set including insulating material of any size, testing complete up to upto 20 HP complete all as specified and directed including transportation to workshop for repair omplete all as specified complete all as specified amd directed by Eng-in-charge.(Note :- Old copper winding wire obtained from dismentling will be contractor\"s property. Unit rate will deemed included cost of old copper binding wire obtained from dismentling of pump). |
| 128 | Supply only in replacement the following items of centrifugal/sewage pumps of capacity upto 20 HP |
| 129 | Impeller CI/SS as per existing at site |
| 130 | Pump shaftSS AISI410 or as per existing at site |
| 131 | Mechanical seal for pump shaft AISI-410or as per existing at site |
| 132 | Wear ringas per existing at site |
| 133 | Gland CI as per existing at site |
| 134 | Ball bearing 6307ZZ |
| 135 | Bearing housing NDE as per existing at site |
| 136 | Shaft Sleeve SS as per existing at site |
| 137 | Impeller nut as per existing at site |
| 138 | Lock nut as per existing at site |
| 139 | Gland packing suitable forexisting pump as per mfg recommendation |
| 140 | Set of O rings as per existing at site |
| 141 | Liquid deflector as per existing at site |
| 142 | Gland Eye Bolt with nut SS as per existing at site |
| 143 | Impeller Key as per existing at site |
| 144 | Oil seal as per existing at site |
| 145 | Mechanical seal for support plate as per existing at site |
| 146 | Bent plug as per existing at site |
| 147 | Set of gasket as per existing at site |
| 148 | Support foot as per existing at site |
| 149 | Lantern ring as per existing at site |
| 150 | Coupling Key CS as per existing at site(Note for item No 50.01 to 50.22 :- Old u/s material will contractor\"s property and accordingly unit rate will be quoted in BOQ by contractor. |
| 151 | Labour for opening the electric induction motor of capacity upto 20 HP including taking down/out the burnt winding wire, cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge, weight etc. including all other insulating material to make it functionalcomplete all as specified and as directed .(Note:- Copper winding wire of approprioate guage will be measured and paid separately under respective item). |
| 152 | Material and labour for Cleaning of following Capacity STP sewage and removing of settle Down Sewage Sludge cum mud of Bar Screen Chamber pit, Oil & Grease trap tank, unit chamber, equalisation tank, MBBR-1, MBBR-2 Tank, SBT Tank,Tube Settler tank, Filter feed tank, Treated water tank. including cleaning of choked MS pipes, SS riser pipes, air diffusers in equalisation tank,tube settler and MBBR tanks and refixing the same, providing with test report of treated water from Govt. approved lab before completion of job for the following capacities STP:-Note : (a) Cleaning Inner surface of tank complete by scraping with steel wire brush and removing mud and sludge collected inside the tank manually and deposit where directed.(b) Washing with clean water and bleaching powder complete tank internally and Removal of left out sludge if any at site and deposit where directed. |
| 153 | STP 250 KLD To 300 KLD |
| 154 | STP 630 KLD To 800 KLD |
| 155 | M&L forStainless Steel (SS-304 grade) Air gridsystem in equalization tank for providing aeration in tank using SS tubing and for air outlet shower rose and ss strainer complete & testing including removing old pipes of any type/size complete all as specified and directed.(Note :- Old U/s material Steel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weight (KG) shall be taken into account and attach with RAR/F Bill.) |
| 156 | M&L forStainless Steel (SS-304 grade) Air grid System in MBBR Tanks for providing aeration in MBBR Tanks using SS tubing and for Air outlet shower rose and ss strainer compelte and testing incluidng removing old pipes (if existing) of any type/size complete all as specififed & directed. (Note :- Old U/s material Steel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weight (KG) shall be taken into account and attach with RAR/F Bill). |
| 157 | Supply & fixing heat resistance , weather proof agro shed net for covering of tanks complete with fixing arrangement arround the tank complete all as specified and directed. |
| 158 | Supply & pouring MBBR/FABPVC media model PP22 effective specific surface area 400 sqm per cum of height 15mm and dia of 22mm complete all as specified and directed. |
| 159 | Material and labour for Tube Settler modules made of PVCincluding dismantling and taking out the old damaged tube settler media complete all as specified and as directed. |
| 160 | Supply & filling in replacement quartz silica sand of 32 -64 grade media size complete all as specified and directed |
| 161 | Supply & filling in replacement quartz silica sand of 16 - 32 grade media size complete all as specified and directed |
| 162 | Supply & filling in replacement quartz silica sand of 8 - 16 grade media size complete all as specified and directed |
| 163 | Supply & filling in replacement quartz silica sand of 4 - 8grade media size complete all as specified and directed. |
| 164 | Supply & filling in replacement activated carbon IV1000 complete all as specified and directed. (Note for item no. 55 to 62 :- (i) The cost for removal the old material from site to the location as directed shall be deemed to be included in quoted unit rate of respective item. No extra amount shall be paid.(ii) Old U/s material obtained from demolition shall be taken on charge in demolition / salvage register and enter page number in demolition statement. Necessary RV of volume (CUM) shall be taken into account and attach with RAR/F Bill). |
| 165 | Supply and fixing in replacement, installation commissioning and testing DOSING PUMP high pressure, single head, gear motored adjustable dosing pump with accessories including lead tubing, connecting nuts, injection check valve ,clay weight , and ferrules and including fixing dosing system consisting of 200 litre PE/FRP Tank with PE/FRP Lid & level gauge along with agitator with shaft & blade in SS 316 (FRP/Epoxy coated)/plastic ,mounted on tank Lid will have port hole for pouring bleaching powder and water when necessary. Lid will also have provision for mounting Dosing pump on the lid/wall complete all as specified and directed.(Note :- Old U/s material pump obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill). |
| 166 | Supplying , laying , jointing, welding & testing MS Pipe (Heavy duty class\"C\") of following size bore laid in trenches or laying on floors or laying on wall in any position including all fitting and taking down of existing U/S M.S pipe complete all as specified and directed.(Note:- (i) MS Flanges and Flange joints complete with jointing materials shall also be Incuded in this item.(ii) Old U/s material MS pipe obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weight (KG) shall be taken into account and attach with RAR/F Bill). |
| 167 | 150 mm bore |
| 168 | 125 mm bore |
| 169 | 100 mm bore |
| 170 | 80 mm bore |
| 171 | 50 mm bore |
| 172 | Supply, fixing, jointing & testing in replacement of unserviceable cast iron sluice valve of Following size as under ISI marked, flanged end drilled pressure rating PN 1.0 PD short body,conforming to IS 14846-2000, having stainless steel spindle with cast iron operational wheel at topcomplete all as specified and as directed at site by Engineer-in-charge (Note- (i) Flanged joints complete with jointing material shall deemend to be included in the unit rate of this item.(ii) Old U/s material sluice valve obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill). |
| 173 | 100 mm bore |
| 174 | 150 mm bore |
| 175 | Supply, Installation and testing in replacement of unserviceable Flanged ends Strainer Y type of following size ISI marked and making good connection with flanged ends, with gasket rubber sheet and nuts & bolts fixing in horizontal/inclined/vertical position, complete all as specified and directed at site by the Engineer-in-Charge(Note- Flange Joints Including Jointing material shall deemed to be included in the unit rate of this item.(ii) Old U/s material strainer obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weight (KG) shall be taken into account and attach with RAR/F Bill). |
| 176 | 100 mm bore |
| 177 | 150 mm bore |
| 178 | M&L for Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6 mm thick, buried directly in ground (earth pit not less than 3.5 m below normal ground level) with top edge of earth plate not less than 2.5mbelow normal ground level, connected to galvanized iron strip 32X6 mm by means of electric arc welding of galvanised iron or steel as shown in electricalplate No 3 of SSR Part I, connected to earth test point and the equipment on the other side complete all as specified, including testing and commissioning including dismentling of existing earthing pit & accessaries complete all as directed.Note : (a) The unit rates quoted against this item shall be deemed to include the cost of excavation and earth work in any type of soil, common salt & charcoal dust in alternate layers, PCC 1:3:6 as in pit, precast RCC 1:2:4 type B-1 with necessary reinforcement as in cover & frame for pit, funnel, watering pipe 20 mm bore GI pipe light grade, protection pipe 40mm bore GI pipe light grade etc.(b)The quoted rates shall also deemed to include the cost of earth test point and earth strip/GI earthing and protection pipe upto 7.5 meter beyond the earth plates electrode.(c) Ols U/s material shall be taken on charge under demolition ledger.) |
| 179 | Supply and Fixing in Replacement Pressure Gauge as required at site complete all as specified and directed by Engr-in-Charge.(Note- Old U/s material presure gauge obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weight (KG) shall be taken into account and attach with RAR/F Bill). |
| 180 | Excavation in trenches not exc. 1.5 mtr wideand not exc 1.5 mtr deep for pipe line in soft/loose soil, getting out and levelling of bottom surface as required complete all as specified anddirected |
| 181 | Returning filling in , including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified anddirected |
| 182 | Removing excavated material from site to a distance not exc 50 m away and depositing where directed at a level not exc 1.5 meters above the starting point complete all as specified and directed |
| 183 | Supply and laying of Burnt bricks sub class \"B\" old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed. |
| 184 | Supply and spread clean dry river sand to required width at bottom and top for cable cushioning complete all as specified and as directed.(Note:- Punned depth of sand cushioning shall be considered for payment purpose). |
| 185 | Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopysloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 350 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lampRYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes,PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., including dismantling exisiting unserviceable LT panel complete. all as specified and directedaccomodate the following items(a) Incoming :- MCCB\"s 250 Amp 36KA, 4Pole - 1 No(b) ML-2 FASD Starter -02 Nos outgoing with overload relay 9-15 Amp(c) ML-1.5 FASD Starter- 02 Nos Outgoing with Overload relay 9-15 Amp(d) ML-1.5 DOL Starter- 08 Nos for outgoing with over load relay 9-15 amp(e) MCB 32 Amp 4 Pole- 01 Nos for outgoing(f) Phase Sequence corrector- 110 Amp- 01 Nos Outgoing(Note- (i) Old U/s material LT panel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill.(ii) Drgs of LT Panel shall be approved by GE.(iii) Make of accessories such MCCB, FASD, DOL & MCB shall be of same make as per CA. |
| 186 | Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopysloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 350 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lampRYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes,PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., including dismantling exisiting unserviceable LT panel complete. all as specified and directedaccomodate the following items(a) Incoming :- MCCB\"s - 160 Amp 16KA, 4Pole - 1 No(b) ML-2 FASD starter-03 Nos with 03 Nos 63 Amp MCCB(c) Phase Sequence Corrector- 70 Amp- 01 Nos outgoing(d) Outgoing MCCB - 63 Amp 10KA 3 Pole - 01 No(Note- (i) Old U/s material LT panel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill.(ii) Drgs of LT Panel shall be approved by GE.(iii) Make of accessories such MCCB, FASD, DOL & MCB shall be of same make as per CA. |
| 187 | Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopysloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 350 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lampRYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes,PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., including dismantling exisiting unserviceable LT panel complete. all as specified and directedaccomodate the following items(a) Incoming :- MCCB\"s - 250Amp 36KA 4 Pole - 01 No(b) Outgoing :- MCCB\"s - 200Amp 25KA 4 Pole - 01 No (c) Outgoing :- MCCB - 100Amp 16KA 4 Pole - 04 Nos(d) Outgoing :- MCCB - 63Amp 10KA 3 Pole -01 No(Note- (i) Old U/s material LT panel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill.(ii) Drgs of LT Panel shall be approved by GE.(iii) Make of accessories such MCCB, FASD, DOL & MCB shall be of same make as per CA. |
| 188 | Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopysloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 350 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lampRYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes,PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., including dismantling exisiting unserviceable LT panel complete. all as specified and directedaccomodate the following items(a) Incoming :- MCCB 200Amp 36KA 4 Pole - 01 No(b) ML-3 FASD Starter- 03 Nos for outgoing(c) ML-2 DOL - 02 Starter Nos for Outgoing(d) 01 x 100 amps 3 Phase Auto Phase sequence corrector(e) 05 x Thermal Overload Relay- Outgoing(Note- (i) Old U/s material LT panel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill.(ii) Drgs of LT Panel shall be approved by GE.(iii) Make of accessories such MCCB, FASD, DOL & MCB shall be of same make as per CA. |
| 189 | Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopysloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 350 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lampRYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes,PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., including dismantling exisiting unserviceable LT panel complete. all as specified and directedaccomodate the following items(a) Incoming :- MCCB 160Amp 36KA 4 Pole - 01 No(b) ML-2 FASD starter - 04 Nos for outgoing(c) 01 x 63 amps 3 Phase Auto Phase sequence corrector(d) 04 x Thermal Overload Relay- Outgoing(Note- (i) Old U/s material LT panel obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of quantity (EACH) shall be taken into account and attach with RAR/F Bill.(ii) Drgs of LT Panel shall be approved by GE.(iii) Make of accessories such MCCB, FASD, DOL & MCB shall be of same make as per CA. |
| 190 | S&F in renewal on load change over switch open execution of capacity 250 Amps , 4 pole , 415 volt , 50 Hz fixed on wall including taking out old existing unserviceable changeover from wall complete all as specified and directed.(Note:- Old U/s material change over obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV in iron scrap of weight (KG) shall be taken into account and attach with RAR/F Bill). |
| 191 | Supply, fixing, jointing and testing ofCast iron Non Return valve of 150mm sizes without by pass arrangement , Swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed at site by the Engineer-in-Charge. (Note:- (i) Flanged joints complete with jointing material shall deemed to be included in the unit rate of item.) (ii) Old U/s material obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of NRV in numbers (EACH) shall be taken into account and attach with RAR/F Bill) |
| 192 | 100 mm bore |
| 193 | 150 mm bore |
| 194 | Supply, layingjointing, testingDIpipe with class-K-7 spigot socketed ends , conforming to IS-8329 laid in trenchesincluding providing route indicators of suitable height and laying at spacing of @ 50m center to center at GL mentioning name of contractor, date of execution & CA No with name of work rubber gasket (Tyton) joints with jointing material & route indicators of the following sizes complete all as specified and directed by Engineer-in-Charge. Note 1: - Excavation & earth work shall be measured and paid seperately under respective items of BOQ.Note 2:- Contractors will provide route indicators mild steel body with top 150 mm plate 3mm thick and height not less than 300mm above finished GL at suitable intervals as directed by EIC. Cost of route indicators shall be deemed included in quoted unit rates.Note3:- DI pipe whole quantity of tender shall be procured by contractor in one time from the authorised dealer of approved make and PV\"s, MTC & e-way bill will produced by contractor during payment of 1st RAR as material laying at site.Note4:- Piece meal site for laying of pipe shall be given by EIC and contractor arrange to transport the DI pipe accordingly at his own arrangement. No any additional payment for transportation will be given to contractor. Contractors are requested to quote rate accordingly.Note5:- Layout plan for laying of DI pipe shall be given by EIC in writing.Note6 :- Cost of Rubber gasket joints (Tyton Joint) included in quoted unit rates.) |
| 195 | 100 mm bore |
| 196 | 150 mm bore |
| 197 | S&F in replacement of butterfly valve (wafer type) P.N 1.6 with S.S-304 disc type of following sizes with all necessary fittings including taking down old unservicable butterfly valve complete all as specified and directed by Engr-in- Charge.(Note:- Old U/s butterfly valve obtained from demolition shall be taken on charge in demolition/salvage register and enter page number in demolition statement. Necessary RV of weightin (KG) shall be taken into account and attach with RAR/F Bill) |
| 198 | 80 mm bore |
| 199 | 100 mmbore |
| 200 | 125 mm bore |
| 201 | 150 mmbore |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
