Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-10-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-10-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone boulder masonry/PCC block masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework & precast concrete articles and disposing off rubbish outside MD land complete all as specified and directed. |
| 2 | M&L for brick work with sub class Bbricks, straight or curved on plan exc 6 m meanradius , built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for brick work with sub class\"B\" bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4.complete all as specified and directed. |
| 4 | Taking down cement plaster of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, and removing debris out side MD land complete all as specified and as directed. |
| 5 | M&L for 15 mm thick rendering on brick wall or concrete wallorany surface in cement mortar 1:6 on fair face/other than fair face and finishing the surface with even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for Rendering 15mm thick on fair face/other than fair face of brick work or concrete any surface in CM 1:4 finished even and smooth without using extra cement upto triple storey building, mixing with approved water proofing compound, for roof facia, chajjas, etc.and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. NOTE:-(i) Height of the bldgs is Appx Up to 12 mtr quoted rate shall be deemed to include necessary scaffolding and safety provision of labours (ii)WPC will be measured and paid separately under relevant item of BOQ as supply only. |
| 7 | M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement complete all as specified and as directed. |
| 8 | M & L for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:(i) Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still inplastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. ii) Area to be plastered may require to be carried out up to height of 15 m, cost of necessary scaffolding and safety provision of laboursshall deemed to be included in rate quoted against this item. |
| 9 | M&L for Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed.Note : Quoted rate shall deemed to include for cost of wall care putty. |
| 10 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed |
| 11 | M&L for Preparation of newly plastered sufaces of walls and applying two coats of weather-proof antifungal exterior emulsion paint over a coat of alkali resistant primer,over wall carePuttyupto triple storey building, complete all as specified and directed. Note: height for execution of item is approx 15mtr. cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. |
| 12 | M & L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation ofsurfaces, complete all as specified and as directed. |
| 13 | Taking down cement plaster and decayed concrete of any description, upto triple storey of building and Material & Labour for repair to chajjas/ roof projection with plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded mechanically crushed stone aggregates) and dubbing out with 20 mm avereage thickness including necessary form work after taking down/ demolition of loose portion/ part/ particles& rendering with 5 mm thick in cement mortar 1:3and finishing the exposed surfaces even & smooth using extra cement complete all as specified and as directed.Note:(i)Height of BLDG is approx 12mtrcost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. (ii) Water proofing compound shall be measured & paid separately(iii) Necessary formwork is deemed to be included in the quoted rate. |
| 14 | Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer\"s instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compoundcomplete all as specified and directed.”Note:(i)Height of bildg is approx 12mtrcost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. (ii) Water proofing compound shall be measured & paid separately |
| 15 | Supply onlyliquid water proofing compound, complete all as specified and as directed. |
| 16 | Demolition offloor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles and disposing off debris to outside the MOD land complete all as specified and as directed. |
| 17 | M&L for Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed. |
| 18 | M&L for glazed ceramic coloured printed tiles of size 450 x 300X 7mm as in dado set andjointedin neat cement slurry & pointedin white cement mixed with pigment to match with color of tiles over and including10 mm thick rendering in cement motor 1:3all as specified and as directed. |
| 19 | M&L, for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 20 | M&L, for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on verticalas in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed. |
| 21 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removing debris outside MD land complete all as specified and as directed. |
| 22 | M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 23 | M&L for 20 mm thick (size of stone shall not less than 55cm x 55cm), 75mm wide white marble border around, laid over & including 15mm thick screed base in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirrior finish with machine, complete all as specified anddirected. |
| 24 | M&L for Machine cut Kota stone slab not less than 18 to 20mm thick as in riser of steps, skirting, dado and pillar laid over & including 15mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified anddirected. |
| 25 | Demolitionof cement concrete in ground floor and paving not exceeding 15cm below or above ground level removing debris outside MD landcomplete all as specified. |
| 26 | M&L for 75mm thick PCC type D-2, (1:4:8) using 40mm graded mechanically crushed stone aggregate as in sub base of paving/Inter Locking , Hard standing Etcccomplete all as specified and as directed. |
| 27 | M&L for 25 mm thick PCC 1 : 2 : 4 type B0 (using 12.50 mm graded mechanically crushed stone aggregate) as in subfloor roughto received tile screed/bedding layercomplete all as specified and directed |
| 28 | M&L for 40 mmthickness PCC 1:2:4 type B0 (using 12.5 mm graded mechanically crushed stone aggregates) as in floor finished even and smooth without using extra cementcomplete all as specified and directed. |
| 29 | M&L for 60mm thick machine pressed rubber mouldedprecast concreteM-35 interlocking colouredpaver block any shape and size conforming to IS-15658-2006 withgrey cement and pigmentcomplete all as specified and as directed. |
| 30 | M&L for Sand filling under floorsincluding wateringand consolidation complete all as specified and as directed. |
| 31 | M&L for Chequered cement concrete commercial Tiles 30cm x 30cm x 20 to 22mm thick of with grey cement andpigmentsetjointed and pointed in neat cement slurry in floors and cut and polished laid ande over 15mm Screed in CM 1:4 complete all as specified and as directed. |
| 32 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded mechanically crushedstone aggregate) as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed.Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,10 mm vide and 30mm deep. (ii)deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. |
| 33 | M&L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded mechanically crushed stone aggregate) as in coping,kerbfor water trough and the like including weathering , slightly rounded or chamfered agle and throating etc incl necessary form work etc complete all as specified and directed |
| 34 | M&L For PCC 1:3:6 type C-2 (using 20 mm graded mechanically crushed stone aggregate) ,Cement concrete in foundations, filling and mass-concrete complete all as specified and as directed. |
| 35 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.as in man holes channel complete all as specified and directed. |
| 36 | M&L for 100 mm thick plain cement concrete 1 : 2 : 4 type B2 (using 40 mm graded mchanically crushed stone aggregate) as in hard standing laid in pannels including necessary form work,finishedby spike rollingsurfaces of concretecomplete all as specified and as directed |
| 37 | M&L for Renewing non skid ceramic tiles in patches area not exceeding 5 sqm including preparing the beds and laying of new tiles setting jointing and pointing etc matching with the existing surfaces, including 15 mm thick cement screed bed, 1:6, complete all as specified and as directed. |
| 38 | M&L for Renewing glazed ceramic tiles in patches area not exceeding 5 sqm including preparing the beds/rendering and laying of new tiles setting jointing and pointing etc matching with the existing surfaces, including 10 mm thick cement rendering, 1:4, complete all as specified and as directed. |
| 39 | Demolition of cement concrete of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land complete all as specified and as directed. |
| 40 | M&L for carrying out water proofing treatment of sunken floor as under:-(i)The concrete/ wall surface shall be cleaned throughly of all laitance , loose particles, dust , grease etc. any friable unsound area shall be chipped, cleaned and there after pre-welted to a saturated surface dried conditions.(ii) In case of potholes , superficial cracks found , the same shall be repaired with polymer modified mortar 1:3 ( 1 cement and 3 coarse sand )using Dr fixit pidicrete URP 301/Sikka latex or equivalent in Asian paints/ Forsoc as admixture @ 10% of cement content and the same shall be applied on vertical area after removing of plaster upto 2 ft height (iii)On the prepared surface , apply a primer coat of Sika latex / Dr. fixit pidicrete URP 301 or equivalent in Asian paints/ Forsocmodified cement slurry 1:4:8 (1 admixture : 4 water : 8 cement) , after prewetting the substrate @ 2 kg/sqm .(iv)the surface thus prepared shall dampen upto saturation and apply two coats of sika top seal 107 or equivalent in Dr fixit pidilite/Asian paints/forsoc ,acrylic modified water proofing coating on the entire area @1.5 kg/sqm (each coat) second coat shall be applied after 6-8 hrs after the first coat and in the direction right angle to the previous coat . the water proofing should be taken to a vertical height of minimum 600 mm above .(v) Apply open woven glass fiber mesh of sika Fab 1 or equivalent in Dr fixit pidilite/Asian paints/forsoc, 150 mm wide strip over the PCC benching (Gola) whilst the first coat is wet and then apply scond coat . cure the hydrosentapplication ( Minimum 6-8 hrs drying) for a minimum 3 to 5 days .(vi)Apply a protection layer of 10 mm thick plaster made of 1:4 cement sand mortar admixed with integral water proofing compound Sika plastocrete plus/ Dr fixit piddilite LW plus or equivalent in asian paints/ forsoc @ 200 ml/bag of cement , applied over the water proofing coating .Note;The rate include the cost of demolition of exiting floor , sub base , PCC/ hardcore filled under floor , removal of debris , removal and replacement of damaged CI/PVC pipes, floor,Nahani traps complete all as specified and directed. . |
| 41 | M&L for Plain Cement Concrete (1:5:10) type E2, (using 40 mm graded mechanically crushed stone aggregate) as in sunken slab filling, mass concrete etc., complete all as specified and as directed. |
| 42 | Demolition of reinforced cement concrete of any description and in any position at level of 15 m high as in roof chajjas, fascia and parapet, RCC jalli any thickness and removing the debris out side MD land complete all as specified and directed. |
| 43 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves, slabs including supports, overhangs, etc. also splays between floors and beams, etc. roughfinished surface concrete.complete all as specified and as directed. |
| 44 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 9 mm dia complete all as specified and directed. |
| 45 | M& L for RCC 1:2:4 type B1 (using 20 mm graded mechanically crushed stone Aggregate) as in in chajjas, lintelfins, facias, louvers, parapets etc incl formwork omplete all as specified and directed |
| 46 | M& L for RCC 1:2:4 type B1(using 20 mm graded mechanically crushed stone Aggregate) as in Beams, cantilivers, shelves, kitchen slabs complete all as specified and directed |
| 47 | M&L for Precast RCC 1:2:4 type B1 (using 20mm graded mechanically crushed stone Aggregate) as in cover slab of drain, culvert and the like set in CM 1:4 all as specified and as directed. |
| 48 | M&L for brooming down surfaces of any description and applying one coat of white wash onold decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. |
| 49 | M&L for brooming down surfaces of any description and applying Twocoat of white wash onold decorated surfaces of Ceilingincluding preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. |
| 50 | M & L forbrooming down surfaces of any description and applying preparation of old wall surfaces, including preparation of old surfaces & filling cracks and holes etc and applying onecoats of cement base paint completeall as specifiedand as directed. |
| 51 | M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surfaceincluding preparation of old surfaces & filling cracks and holes etc, complete all as specified and directed. |
| 52 | M&L for Preparing the surfaces of old wall surfaces and applying one coat of distemper oil emulsioncomplete all as specified and directed |
| 53 | M&L for Complete removal of existing treatment and preparing the surfaces of walls plastered or unplastered and applying two coat of distemper oil emulsionover a coat of alkali resistent primer over putty any thickness.complete all as specified and directed Note : Quoted rate shall deemed to include for cost of wall care putty. |
| 54 | M&L for Preparation of old wooden surfaces and applying a coat of synthetic enamel paint over 10 cm width or girthcomplete all as specified and as directed. |
| 55 | M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or girth with onecoats of synthetic enamel paint including preparation of surfaces etc complete all as specified and as directed. |
| 56 | M & L for complete removal of old/existing treatment including preparation of wall/Ceiling sufaces of any description and applying two coats of exterior grade weather proof paint water basedover a coat of primer overany thicknessbirla care putty,on wall surfaces complete all as specified and directed.Note : (i) Height of the bldgs is Appx Up to 12 mtr cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate.(ii) First the complete removal of existing treatment shall be done and got approved from Engr-in-charge.(iii) Final coat shall be done after getting approval of completion of priming coat from Engr-in-Charge |
| 57 | Taking down chowkats or frame without taking off shutterfrom the frame not exceeding 1.50 Sqm each from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion including neessary brickwork in cement mortar 1:3, complete all as specified and as directed. |
| 58 | Taking down chowkates / frame without taking off shutter exceeding 1.50 Sqm not exceeding 4 Sqm each. from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion including neessary brickworkin cement mortar 1:3, complete all as specified and as directed |
| 59 | Taking down Shutters of any description exceeding 1 sqm and not exceeding 2 sqm each,complete all as specified and as directed |
| 60 | S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVCfasteners, screws, brackets as per SSR Part –II (2020) complete all as specified andas directed. |
| 61 | S&F for Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:),With Wood Free EPS with 2,4 or 6 raised panel design with 2 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawin complete all as specified and directed. |
| 62 | M&L for Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed. |
| 63 | S & F 35 mm thick plain framed panelledfactory made shutters(two panel) with IInd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial vaneer on both faces.The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 64 | S&F 35mm thickmm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.. The rates for flush shutters include for the provision of suitable blocks for taking mortice locks, latches, or other fittingscomplete all as specified and as directed |
| 65 | S & F 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars)edges of framingplain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members as specified in SSR Part-I section 8 clase 8.24(a) of shutters all as specified and as directed. |
| 66 | M&L for Mild steel framed work such as in doors or gates of angle, or tee sections with gusset plates, rails, braces,etc. completely drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (includingof steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete Gde Fe 410 - W (Grade-E- 250) quality-A complete all as specified and as directed. |
| 67 | S & F Powder coated aluminium frame/shutterfor doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for slidingetc. complete all as specified and directedNote :-1. For payment purpose weight of aluminium section shall be only measured.2. Cost of aluminum mongry, lock, rubber packing, roller for sliding are included in the quoted rate.3. Sheet glass and wire gauge shall be measured and paid separately. |
| 68 | Taking down boards of any description and any size as in shelves complete all as specified and directed. |
| 69 | S & F 19 mm thick fire retardant plywood BWR type including cutting, jointing, fixing with screws as in kitchen cabinet box type complete all as specified and as directed |
| 70 | S & F Decorative laminate type1, 0.90 to 1mm thick , of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions, complete all as specified and directed. |
| 71 | M&L for 18/19mm thick one side prelaminated particle board, interior grade, with decorative choice laminate and fixed with screws to steel/timber frame work including provision of 6mm thick teakwood edging etc complete all as specified and directed |
| 72 | S & F teak wood beading of size 18/19 mm x 6 mm on the exposed/edges surfaces of the block board complete all as specified and as directed |
| 73 | S&F mild steel door shutter two leaves made out of 0.80 mm MS sheet, all round with frame of angle or other sections with gusset plates, rails braces etc , and leaves of 21 gauge MS sheet as per godrej pattern , with three way of locking arrangement with and includding brass lock with duplicate keys , steel CP handle 200 mm long , drilled for fixing of steel sheeting or other covering door etc complete conforming to Fe 410-00 (Gde E-250) quality \"A\" including one shop coat of red oxide primer over two coats of spray painting door with frame complete all as specified and directed. |
| 74 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 |
| 75 | M&L for Cutting holes in brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wallbuilt in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. Note:- This item shall not be operated if hold fast holes are required at new location. |
| 76 | S&F machine crafted box type cabinet for kitchen using 18-19 mm thick PVC board both side laminated with and including all necessary fitting and fixtures to install wire basket , shutter shall be fixed by using full overlay MS clips on hinges high quality nickle plated satin finish size- 101 mm -150 mm ,02Nos per leaf ,including all fittings ,channels , 150 mm s/s handles complete all specified and directed .NOTE:- (i)Wire basket shall be measured separetely.(ii)Front area of box shall be considered for payment purpose.(iii) Depth of box shall be equal to the width of cooking platform. |
| 77 | S&F wire basket made of top quality 304 grade stainless steel,nickel chromium plated ( Ni 4%) of Approved design and pattern complete all as specified and directed. |
| 78 | S&F in repairStainless steel chromium plated peg set having 6 pegs for hanging of clothes of approved pattern shape and size complete all as specified and directed. |
| 79 | S & F in fancy type stainless steel handle of size 100 mm longcomplete all as specified and as directed |
| 80 | S&F in 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished, complete all as specified and as directed |
| 81 | S&F Stainless steel soft close hinges, suitable for modular kitchen complete all as specified and as directed. Make : Godrej or techno commercial equivalent as approved by GE |
| 82 | S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding with and including 8mm dia Squarguard bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed Notes:(i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala(ii) Glazing and wire gauge will be measured and paid separately under respective items herein(iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate |
| 83 | S&Fpowder coated aluminium anodised window(Three track sliding window, 02 shutters with glass and 01 shutter with wiremesh) made out hollow aluminium as mentioned below. Each shutter shall have 01 No. aluminium handle of 75mm size and 02 Nos aluminium tower bolt 150mm long. Window shall be glazed with 4.00mm thick tinted glass fixed with glazing clips, rubber beading and anodized aluminium beading and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple etc complete all as specified and as directed. Chowkhat bottom section size : 50.3mm X 26.0mm, 1.20mm thickChowkhat top & sides section size : 50.3mm X 15.0mm, 1.00mm thickShutter top & bottom rail section size : 101.60mm X 44.45mm, 1.50mm thickShutter inner lock rail section size : 37.5mm x 15.0mm, 1.50mm thickShutter side mid rail section size : 37.5mm x 15.0mm, 1.36mm thickNote :- (i) The weight of Aluminium sectons shall not be less than 0.55Kg/RM. (ii) Minimum thickness of anodization shall be 15 micron. (iii) The door/window shall be as per drawings/directions of Engineer-in-charge and drawing may be reffered from GE office. |
| 84 | M&L for Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint complete all as specified and directed. |
| 85 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and remove the debris outside of MD land, complete all as specified and as directed |
| 86 | S&F 3 mm thick sheet glass ordinary quality not exceeding 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed. |
| 87 | All as per BOQ srl Item No.86.00 here-in-above but figured glass complete all as specified and directed. |
| 88 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repair complete all as specified and directed. |
| 89 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed with Flat Ironbeading/nut& bolt and wooden beadingin repair complete all as specified and directed. |
| 90 | S & F Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed |
| 91 | S & F Aluminium anodized cast type handles 150mm long complete all as specified and as directed |
| 92 | S&F Stainless Steelbutt hinges medium weight of size 100 mm complete all as specified and directed. |
| 93 | S & Fin door stopper of rubber and aluminium alloy body, 150 mm size fixed complete all as specified and as directed |
| 94 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm, complete all as specified and as directed |
| 95 | S & F magnetic ball catches of standard type fixed complete all as specified and as directed |
| 96 | S&F tubular curtain rail, stainless steelanodized 20 mm dia all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed. |
| 97 | S&Fstainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks suitable to curtain rod of 20mm dia, decorative type fixed with suitable steel screws and PVC cleats, including taking down unservicable brackets complete all as specified and directed. |
| 98 | S & F in repairs of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate completeincl welding complete all as specified and as directed |
| 99 | Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.Notes: i)Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe,ii) Cutting chases for concealed piping shall be measured and paid separately under respective item. |
| 100 | Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.Notes: i)Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe,ii) Cutting chases for concealed piping shall be measured and paid separately under respective item. |
| 101 | Refixing 20mm bore water tubing surface/concealed in same/new location after cleaning and application of bituminous paint on concealed portion of tubingincluding cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union (if required) complete all as specified and directed.Note : i) Taps, valves if any shall be removed before taking down pipe.ii) Cutting chases and making good shall be measured and paid separately |
| 102 | Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortar 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exceeding 10CM girth. complete all as specified and directed. |
| 103 | S & F in repair15 mm CP cast copper alloy bib taps fancy type screwed down, screwed for iron pipe or for brass ferrule including taking down old bib taps complete all as specified and as directed. |
| 104 | S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanksand fly nuts, screwed for iron pipe including taking down old pillar taps complete all as specified and as directed. |
| 105 | S & F in repairs CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 106 | S&F in repair chromium plated overhead shower rose 125mm dia with swivel joints with and including overhead shower arm 230mm with wall flange , complete all as specified and directed by GE. |
| 107 | Supply and fix in repairs,15mmStop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as per Cat No.F450019 & compatible with F840094 • F840095• F840096 • F840097) of Hindware or equivalent in other makes specified here-in-after, complete all as specified and as directed |
| 108 | S&F in repair, Chromium plated Wall mixer with bend pipe for overhead shower with built-in non return valve with CP wall flanges, fixed in repair complete all as specified and directed”Make : Cat part No F2006402 of Jaquar or techno-commercial equivalent model in other makes as approved by GE” |
| 109 | S&F in repair Centre hole wash basin mixer for wash hand basinmake Jaquar Product code No CON-CHR-167KNB and equivalent as approved by GE complete all as specified and directed |
| 110 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr tube & hook (braded Tube) and ABS valve including making connection and fixed in position complete all as specified and directed. |
| 111 | S&F in repair Single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed. |
| 112 | S & F in repairPVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer all as specified and as directed. |
| 113 | S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set(excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE” |
| 114 | S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet andintegral foot rests and makingconnection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor,complete all as specified and directed. Make : Cat part No CALINA S3010102 of CERA or techno-commercial equivalent model in other makes as approved by GE |
| 115 | S& FVitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, including Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms)with 32mmbore PVC waste pipe minimum 800mm longwith inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified and as directed. |
| 116 | S&F in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as per Model No:CIENA PREMIUM Cat Part No B1010102 of CERA Make ortechno commercial equivalent in other makes complete all as specified and as directed. |
| 117 | S & F in repairs Plain looking mirror of size 600x450 mm with bevelled edge selected quality glass mounted on 6mm thick commercial plywood and fixed with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 118 | S & F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’sincluding cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm including taking down old steel sink all as specified and as directed. |
| 119 | S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 31\"\"x36\"\"x10\"\" complete all as specified and as directed.Make: Blue star model : SSKPR -315 or equivalent asapproved by GE |
| 120 | S&F in repair PVC waste pipe 32mm bore not less than 800mm long complete all as specified and direceted |
| 121 | Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 122 | Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 123 | S&F in repair Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball scrured for iron pipe of dia 20 mm bore complete all as specified and directed . |
| 124 | S&F in repair for 15 mm dia Gun-metal, golbe or gate valves/, with iron wheel head, screwd both end sor iron pipe and fixed, complete all as specified and directed |
| 125 | M & L forin repair Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed |
| 126 | S&F in repairCornerglass shelf assembly consisting of 5.5mm thick sheet glass self 25cm wide with chromium plated bracket guard and fixed with CP screws and wood cleats with wall complete all as specified and directed. |
| 127 | S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and rail 60cm long and fixed with CP screws and wood cleats with wall complete all as specified and directed. |
| 128 | Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 110 mm dia, type B (conforming to IS 13592) single socketedin any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.Note :- Provision of necessary scaffolding and security measures for labour for replacing defective pipes shall deemed to be included in quoted rates, and nothing extra will be admissible in this regards. |
| 129 | Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia, type B (conforming to IS 13592) single socketedin any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.Note :- Provision of necessary scaffolding and security measures for labour for replacing defective pipes shall deemed to be included in quoted rates, and nothing extra will be admissible in this regards. |
| 130 | S & F PVC (SWR) bends any radius 75 mm dia of bore with access door, including taking down old bends all as specified and as directed. |
| 131 | S & F PVC (SWR) branch piece single (single T)equal of bore 75 mm dia with access doorin repairs all as specified and as directed |
| 132 | S & F PVC (SWR) branch piece single (single T) equal or unequal of bore 110 mm dia, with access door in repairs all as specified and as directed |
| 133 | S&F UPVC (SWR) bends any radius, 110mm bore with / without access door, complete all asspecified and directed. |
| 134 | S & F PVC (SWR) multi-floor trap, plain with chromium plated grating including jointing with solvent cement, 75mm dia, including dismantling the damaged trap, complete all as specified and directed. |
| 135 | S&F in repair PVC floor trap/Nanhi Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia, complete all as specified and as directed |
| 136 | M & L for welding in repairs to steel windows / doors exceeding 2.5 cm but not exceeding 5.00 cm in length and thickness of metal to be welded not exceeding 6mm complete all as specified and as directed. |
| 137 | S& FGI spout40 mm dia medium grade to be embeded in sunken floor complete all as specified and directed. |
| 138 | M&L in repairsDrawer channelof length 0.50m and not exceding 1.00mtrfor modular kitchen, complete all as specified and as directed |
| 139 | M&L for granular textureed homogenous wall finishing system consisting of twocomponet system of dry granules (25 Kgs Pack ) Madeof 92% silica particlescoated with fade resistant pigments ,100% arcylic polymer bondringagent(5KG pack)with the applied thickness of thecoating being between 0.8mm to 1.2 mm to be applied on curved ,smoothlevel plastered surface , as per direction /supervision of Engr-in charge , all complete , abovetextured coating should confirm to surface spread of flame class of BS 476 Part 7 :1971 and pull of strength of the coatingto meet JISE6909 all as specified and as manufacture specification /instruction and as directed . |
| 140 | Disconnecting existing PVC water tank of capacity exceeding 500 ltr but not exceeding 1000 ltr fixed on roof by setting aside (or lowering, if required) for cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc and hoisting/refixing/reconnecting in same/new position including writing date of cleaning on each tank with white paint, height/size of letters/figures not less than 10cm in height, and refixing existing serviceable ball valves complete all as specified and directed.” |
| 141 | S&F butt hinges, medium weight cold rolled mild steel 100 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed. |
| 142 | S&F in repairs PVC Mirror cabinet of size 350 x 450 mm complete all as specified and as directed. |
| 143 | M&L for two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer on new steel surfaces of any description over 10 cm width or girth includingpreparation of surfaces all as specified and as directed.. |
| 144 | S&F in repairs 100mm size Mortice lock (four levers), vertical type, brass body including handles”wooden doors or aluminium doors including screwing and fixing complete all as specified and as directed. |
| 145 | S & F in repair Chromium plated fancy type brass soap dish with wall hookcomplete all as specified and as directed. |
| 146 | S&F in repair Stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat, complete all as specified and directed by GE. |
| 147 | S&F in repair CP towel rake 600mm dia Fixed with chromium plated screw and PVC cleat fixed in repair etc complete all as specified and directed. |
| 148 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated or new wooden surfaces exceeding 10 cm in width or girth complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
