|
| 1 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Paymentfor grouting of joints to be made separately). size of tiles 600x600mm as per DSR 11.47.2 |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR 8.31 |
| 3 | P/Fsal wood wrought framed and fixed including simple mouldings straight work as in chaukhat I/C Supply of all materials, labour T&P required for proper completion of the work as per DSR9.1.2 |
| 4 | S/F of 3.00 cm thick teek wood fully panelle door & window shutter including S/F of wooden cleats and stop and including fixing & adjustment of hinges bolt lock handle spring & or other fitting but excluding their supply and including painting with two coat of Blach Japan on all iron fitting if necessary screues to be supplies dipartmentaly as per SI No-411 |
| 5 | Providing and injecting chemical emulsion for pre-constructional Anti termite treatment and creating a chemical barrier under and around the column, pits wall trenches, basement excavation top surface of plinth filling junction wall and floor along the external perimeter of buildingexpansion joints surroundings of pipes and conduit etc. complete (Plinth area f the building at ground floor only shall be measured as per I.S.6313(Part-II1981) DSR 2.35.3.1 |
| 6 | S/F of 110 6 Kg /cum mm dia PVC pipe of approved quality as a down pipe I/C Supply of all materials, labour T&P required for proper completion of the work |
| 7 | Reinforced cement concrete work in beams, suspendedfloors,roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases above plinth level up tofloor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) : 3 graded stone aggregate 20 mm nominal size).DSR 5.3 |
| 8 | Mildsteel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and includingsupply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. as per SI No-504 |
| 9 | P/L40 mm thick 1:2:4 Cement Coarse sand girt with Murga Jali on roof without base concreteI/C Supply of all materials, labour T&P required for proper completion of the work |
| 10 | Painting wood work with Deluxe Multi Surface Paint ofrequired shade. Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture DSR 13.48.2 |
| 11 | Supply and fixing Masquite Proff of Iron wair JaliI/C Supply of all materials, labour T&P required for proper completion of the work as per DSR 10.29.2 |
| 12 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR17.1.1 |
| 13 | Supply and fixing of P trap 100mm dia PVC I/C Supply of all materials, labour T&P required for proper completion of the work |
| 14 | Supply and fixing of 15 mm dia CPVCPipeI/C Supply of all materials, labour T&P required for proper completion of the workDSR 18.8.1 |
| 15 | Supply and fixing of 20 mm dia CPVCPipeI/C Supply of all materials, labour T&P required for proper completion of the workDSR 18.8.2 |
| 16 | Supply and fixing of short body Bib cock heavy quality I/C Supply of all materials, labour T&P required for proper completion of the work |
| 17 | Supply and fixing of long body Bib cock heavy quality I/C Supply of all materials, labour T&P required for proper completion of the work |
| 18 | Supply and fixing of PVC connectionI/C Supply of all materials, labour T&P required for proper completion of the work |
| 19 | Construction main hole 600x600mmDSR 18.33 |
| 20 | Supply and fixing of white earthenware wash hand basin size 630x650Cera,/Hind ware/Parry wareetc. make superior quality including material, labour and T&P etc. complete for proper completion of work.DSR 17.7.8 |
| 21 | Supply and fixing of looking mirror of Atul or equivalent make of size 600x450 mm with hard board sheet including cost of all materials and labours complete for proper completion of work. |
| 22 | Supply and fixing of C.P. brass angle valve (FLR-5053N) including material, labour and T&P etc. complete for proper completion of work. D.S.R No. |
| 23 | Supply and fixing of C.P. brass wall mixer (FLR-5273UPR) including material, labour and T&P etc. complete for proper completion of work. D.S.R No. |
| 24 | Supplyand fixing of C.P. Brass extension piece 15 mm dia heavy quality ISI marked including all types of fitting etc. complete for proper completion of work. |
| 25 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : 17.2.1W.C. pan with ISI marked black solid plastic seat and lid |
| 26 | Supply and fixing of C.P. brass Health faucet of (ALD-573) make including material, labour and T&P etc. complete for proper completion of work.DSR No. |
| 27 | Supply & fixingC.P. Brass Towel rail (Jaquar) 600mm longincluding material, labour and T&P etc. complete for proper completion of work.DSR No. |
| 28 | Supply & fixingC.P. Brass soap dish (Jaquar) or equivalent including material, labour and T&P etc. complete for proper completion of work.DSR No. |
| 29 | Supply and fixing of two way C.P. brass bib cock(FLR-5041)including material, labour and T&P etc. complete for proper completion of work. DSR No. |
| 30 | Supply & fixing of PVC Nahani trap 100 X75 mm dia size with C.P Jali including supply of all material, labour, T&P complete as per direction of engineer incharge.DSR No.17.60.2.2 |
| 31 | Supply and Fixing of towel ring equivalent including cost of all material, labour, T&P etc. complete as per direction of E/I.DSR No. |
| 32 | Supply and Fixing ofCorner Glass Shelf (ACN-1173) including cost of all material, labour, T&P etc. complete as per direction of E/I.DSR No. |
| 33 | S/F of 500 ltrcapacity PVC water tankincluding all accesaries and fitting including supply of all materials. labour and tools and plants etc. required for proper completion of the work. As per DSR 18.48A |
| 34 | Supply and fixing of PVC float valve 25mm I/C Supply of all materials, labour T&P required for proper completion of the work |
| 35 | Supply and fixing of brass wall cock with rod I/C Supply of all materials, labour T&P required for proper completion of the work |
| 36 | Supply and fixing of tank nipple 20mm I/C Supply of all materials, labour T&P required for proper completion of the work |
| 37 | Supply and fixing of gate wall 25mm I/C Supply of all materials, labour T&P required for proper completion of the work |
| 38 | Supply and fixing of C.P. brass Over head shower (OHS-1759) with arms(SHA-49483) of including material, labour and T&P etc. complete for proper completion of work. DSR No.18.22.1 |
| 39 | Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 cement and coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour T&P etc. required for proper completion of the work excluding base concrete.DSR 11.26.1 |
| 40 | Class - 150 brick work in 1:4 cement and fine sand of 2.25 fineness modulous mortar in foundation and Plinthincluding supply of all materials. labour and tools and plants etc. required for proper completion of the work. As per DSR 6.4.1 |
