Tender For Maintenance And Repair Of Link Road Bhokar Heri To Belda, 1 Earth Work In Cutting In Embankment In Ordinary Soil Excavation To Be In The Form Of Regular Pits Not Exceeding 0.50 M. In Depth And Earth Work In Embankment To Be In 20 Cm. Layers I, saharanpur-Uttar Pradesh

Tender For Maintenance and Repair of link Road Bhokar heri to belda, 1 Earth work in cutting in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levies and slopes and also including 1.50 M lift and 30 M. Lead The earth from cuttingS.I. No. 253 a 2 WBM Grading-2Providing & laying spreading and compacting stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 3 as per Technical specification Clause 405 Mord Book Page No. 4-17 3 WBM Grading-3Providing & laying spreading and compacting stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 3 as per Technical specification Clause 405 Mord Book Page No. 4-18 4 Providing & applyingPrimer coat with bitumen emilsion (SS-1) on surface of granular base including cleaning of road surface and spraying at the rate of 0.90-1.2 kg/Sqm using mechanical means as per technical Specfication Clause 502 5 Providing & applyingTack coat with bitumen VG-10 grade using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 6 Providing laying and rolling of open-graded premix carpet of 20 mm thikness composed of 13.2 mm to 5.6 mm aggregates either usingpenetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either type C as per Technical Specification clause 508 (Primixing work Maniacal Mean)MORD Specification clause 508 7 Providing & laying seal coatby manual means with VG-10bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as perTechnical Specification clause 510 8 Construction of 2 cm gauge approved stone grit, coarse sand & cement in proporation of 1:1.5:3 in CC pavement cement coarse sand & fine aggregate mixture/plant of not less then 0.2 cum capacity & appropriate weight batcher using approced mix design, laid in approved fixed form work (Steel) channel) laying and fixing of 125 micron thick polyhene film. wedhes, steel plates including leveling the form work spreading the concrete with shovels rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion clothe for curring of concretepavements for not less then 14 days curring compound (where as specified) and water finishing to lines & grade including supply of all materilas, labour T&P etc required for proper complection of the work and also including complete shifting of recron 38 fibre reinforcement materilas New Item 9 9 Excavation in foundation in ordinary soil includinglead upto 30 meter and lift upto 1.5 meter and including of excavated earth in to the trenches or in to the sapce of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed E/I (S.I. No. 251A) 10 M-150 Brick Work in 1:4 cement & Coarse sand in foundation and plinth including supply of all materials labour tools & plants etc S.I No. 305a 11 Plain Cement concrete 1:2:4 Cement coarse Sand & 2cm gauge Stone grit etc.S.I. No. 279 12 Supply & laying and fixing 350 m.m Dia NP3class R.C.C humepipe including joining etc complete. Ana 13 BOE on edge dry i/c supply of all material labour and t&p etc required for proper completion of the work (SI NO 762 B) 14 Supplying & Fixing of retro reflective sign board with a corrosion resistant 4 mm thick aluminium composite panel (HIP type IV) as per approved design & drawing. Retro Reflective (HIP type IV) sign board warranty upto 7 years. Rate includes fabrication, supply of materials, transportation and erection of the signage structure for proper completion of work. Saction rate Moradabad at HQ

INR 3430 /-

INR 192000.0 /-

INR 19.18 Lakhs /-