Tender For Provn Of Drinking Water Facilities At Cob New Thewati Of 38 Assam Rifles
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2024
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kiphire → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Drinking Water Facilities At Cob New Thewati Of 38 Assam Rifles
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART-I (COSNTRUCTION OF DIVERSION WIER) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and desposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. |
| 3 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level :1:1 ½:3 (1 Cement ½ coarse sand (zone-III) derived from natural sources “ 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level :1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural soruces : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up withcement concrete 1:6:12 (1 cement :6 coarse sand :12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement:6 coarse sand) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 7 | Steel reinforcement for R.C.C. work including straighterening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement :1:3(1cement:3 fine sand) |
| 9 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 : 150 mm dia pipe |
| 10 | Providing and Fixing C.I sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 150 mm diameter Class I |
| 11 | SCHEDULE ‘A’ PART-II (CONSTRUCTION OF DESILTING TANK AT COB NEW THEWATI) Drg No. KIPHIRE/PHED/02 dt 25 Nov 2023 |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and desposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. |
| 13 | Supplying and stacking at site.63 mm to 45 mm size stone aggregate for 100 mmthick hardore work |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level :1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural soruces : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level :1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural soruces : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural soruces : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 18 | Steel reinforcement for R.C.C. work including straighterening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars |
| 19 | Steel reinforcement for R.C.C. work including straighterening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars |
| 20 | Half brick masonry with common burnt clay F/P/S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3(a cement : 3 coarse sand) |
| 21 | 12 mm cement plaster finished with a floating coat of neat cement :1:4(1cement:4 fine sand) |
| 22 | Extra for providing and mixing water proofing material in cemen per bag of plaster work in proportion recommended by the manufacturers. |
| 23 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching. & refilling etc. external work 65 mm dia nominal bore |
| 24 | Providing and fixing gun metal gate valve with C/I/ wheel of approved quality (screwed end) : 65 mm nominal bore |
| 25 | SCHEDULE’A’ PART –III(CONSTRUCTION OF RCC TANK AT COB NEW THEWATI ) Drg No. KIPHIRE/PHEK/03 DT 25 Nov 2023. |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and desposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. |
| 27 | Supplying and stacking at site.63 mm to 45 mm size stone aggregate for 100 mmthick hardore. |
| 28 | 1:1 ½:3 (1 Cement ½ coarse sand (zone-III) derived from natural sources “ 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 29 | Providing and laying damp-proof couse 40mm thick wth cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 30 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level :1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural soruces : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string |
| 32 | Steel reinforcement for R.C.C. work including straighterening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars |
| 33 | 12 mm cement plaster finished with a floating coat of neat cement :1:4(1cement:4 fine sand) |
| 34 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 : 150 mm dia pipe |
| 35 | SCHEDULE’A’PART-IV(PIPE LINE AND CONNECTING WORKS) |
| 36 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching. & refilling etc. external work 40 mm dia nominal bore |
| 37 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching. & refilling etc. external work 25 mm dia nominal bore |
| 38 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):40 mm nominal bore. |
| 39 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):25 mm nominal bore. |
| 40 | Providing and fixing gun metal gate valve with C.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore |
| 41 | Providing and fixing gun metal gate valve with C.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore |
| 42 | Clearingjungle including uprooting of rank vegetation, grass, bruch wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
AI Tender Summary
Tender Timeline
Sep 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender