Tender For Upgradation Of Conferrence Room Of G.P. Office Under Arabinda G.P. Under 5Th Sfc(Tied) Fund /2023-2024, Sansad No. Vi For The Year 2024-25.(Phase-I).Nit No:-Wb/Jal/Sadar/A.G.P/04/2024-25
Tender Value
3.46 Lakhs
Estimated cost
Bid Submission
30 Sep 2024
0 days left
EMD
6920
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sadar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation of Conferrence Room of G.P. Office Under Arabinda G.P. under 5Th SFC(TIED) Fund /2023-2024, Sansad no. VI for the year 2024-25.(Phase-I).NIT NO:-WB/JAL/SADAR/A.G.P/04/2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Description of work/ supply materials |
| 2 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. b) Span beyond 12 Mtr and up to 20.00 MtrI) For structural members of specified sections weighing less than 22.5 Kg/m. |
| 3 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mmdia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be madeon area of finished work). |
| 4 | Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). (A) 300 mm lapping each way(a) With 0.71 mm sheet |
| 5 | 125 mm th. brick work with 1st class bricks in cement mortar (1:4). G.F. Level:- |
| 6 | (a) Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surface by sand papering etc. Metal SurfaceSteel Surface: |
| 7 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia |
| 8 | B) UPVC Fittings: a) Plain Tee (i) 75 mm. Dia.(ii) 110 mm. Dia |
| 9 | (c) Bend 87.50 Degree(ii) 110 mm. Dia |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (Excluding cost of chipping over concrete surface).(ii)With 1:4 cement mortar(c) 15mm thick plaster |
| 11 | Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc.NOTE: Cement 0.152cu.m. per 100 Sq. |
| 12 | Providing & fixing Concrete Sign Board as per IRCspecification of size 900 x 750 x 37 mm. thick made with C.C. 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm x150 mm of height 2.65 m. of which top 750 mm is of section 100 x 13 mm. and 1.90 metre above GL& 0.75 metre below GL including digging hole, repacking the samewith cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) |
| 13 | Add GST @ 18 % |
| 14 | Add Cess @ 1% |
AI Tender Summary
Tender Timeline
Sep 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 03, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender