Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-09-2024 | Corrigendum I | Technical Bid | 18-10-2024 |
| Sl. No. | Item Description |
| 1 | Sign Type Code: 1.1Sign Type: Airport Entry Portal Refer design drawing: 1.1ProvidingandfixingNon-illuminated sign on existingMSSign Postincludingall operationsfromfabricationto installation all complete as per drawings, technical specifications, signagescheduleand tothe satisfaction of theEngineer in-Charge. All exteriorsigns should be manufactured considering harsh outdoor conditions, weather proofing techniquesand materialsshall be used. The scope of item also include dismantlingof existing Sign Frame & Sign Face and shifting to AAI stores as required.Sign face: Providing and fixing sign face panels 3mm thick Aluminiumsheet fabrication,Aluminiumsheet fixed to horizontal structuraltruss.Whiteretro- reflectivevinyl pasted over edge toedgealuminium sheet. Graphics inplotter cutRAL5013 exteriorgradeopaquevinylpastedover white retroreflective vinyl.Sign Frame (Spanning Truss): Providing and fixing sign frame 50 mm x 50 mm in MS square section hot dipped galvanised and P.U. painted to match RAL 9006 as per dwaring. Frame to be directly mounted on existing sign structure. Frame to receive the sign faces.Sign Structure: Sign Frame to be mounted on existing 2 legged-Sign Post.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for fixing Sign Frame on Structure and Sign Face on Sign Frame.The actual structural design of the sign and the frame for its stability shall be responsibility of the contactor.All hardwareusedfor fixing of sign shallbe Stainless steel. Secret fixing methods should be used to fix parts together.Size of 2-legged Gantry — 20 Mtr.(Width) X 1.5 Mtr.(Sign Height) Both Side |
| 2 | Periphery Airport Name on Existing WallSign type 1.2Providing and fixing External Signage\"s made of SS 304 (brush finish) 1.6 mm thick sheet for letters with raising(letter depth of 30-50mm). Including all fittings, accessories, fixtures, fabrication.The signage will be reverse/Back illuminated. For illuminationback of the signage to be made of 4 mm thick acrylic. Illumination to be done with LEDs, powered with IP 67 Grade powersupply fixed on the wall with necessary fixtures.The signage need to be provided on existing wall of size 16.00 mtr. x 3.30 mtr. The signage letters shall be of height 500 mm. and in three rows (1 row for each language). Back lit LED Illuminated AAI Logo of height 2500 mm also to be provided.All internal illumination shall be using LED Lights of approved make or equivalent with electroniccontrollers, havingeven spread and overlapsto avoidbandingand darkspots and adheringto the LUX levels mentionedin the performancespecification. Cost to include all internal connectionsand Wiring, terminatingand connecting the incoming cable laid by Airport contractor at the site.The scope of item also include dismantling of existing SS letters (arranged in two rows) from the wall and shifting to AAI stores; and repairing & finishing the wall with two coats of textured exterior paint of existing colour shade. |
| 3 | Vehicular Directional Sign - Pole Mounted Sign type 1.3aRefer design drawing 1.3a-1ProvidingandfixingNon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications,signagescheduleandtothesatisfactionoftheEngineer-in-Charge.Allexteriorsignsshouldbemanufaturedconsideringharsh outdoor conditions, weather proofing techniques and materials shall be used.1.Sign face - 3mm thick aluminium with a white retro-relective film. Graphics in Plotter RAL:5013 Exterior grade opaque vinyl pastedover white retro-relective vinyl.2. Sign frame - M.S.frame 50x50x3mm hotdipped galvanised3. Sign structure - MS square post 125x125x5mm and mounting square sections 75x75x3mm, hotdipped galvanised and PU Painted to match RAL 9006 grouted in ground. Secret ixing methods should be used to fix parts together.4. Base plate - 300x300x10mm thick plate mounted on the flooring.ProvidingandlayingfoundationforthesignincludingitscompactionandallactivitieslikeExcavation,PCCbaselayer,providingandfixingin positionelectricalconnectionwhereverapplicableandfinishedasperdrawing.Theitemcostincludescuttingandopeningthefloorfinishat location, and making good the location to the match the original finish after fixing and installation of sign.The actual structural design of the sign for its stability shall be responsibility of the EPC contractor and shall be designed with due consultation and approval from structural designer.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.(Note: Signs placed on internal roads of Airport to help align and manage vehicular traffic. - Ground Clearance 2400mm |
| 4 | 1.3a, Message-1, (Single/Double Sided) (Size 2100 mm x 425 mm.) |
| 5 | 1.3a, Message-2, (Single/Double Sided) (Size 2100 mm x 850 mm.) |
| 6 | 1.3a, Message-3, (Single/Double Sided) (Size 2100 mm x 1275 mm.) |
| 7 | Directional Sign - Pedestrian Sign Type 1.3bRefer design drawing 1.3bProvidingandfixingNon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications,signagescheduleandtothesatisfactionoftheEngineer-in-Charge.Allexteriorsignsshouldbemanufaturedconsideringharsh outdoor conditions, weatherproofing techniques and materials shall beused.» Sign Face1.Sign face - 3mm thick aluminium with a white retro-relective film. Graphics in Plotter cut RAL:5013 Exterior grade opaque vinyl pasted over white retro-relective vinyl pasted over 3mm thick aluminium sheet.2. Sign frame - M.S. frame 50x50x3mm wide, hotdipped galvanized3. Signstructure - M.S. hollow box section 75x75x3mm andmountingsquare sections, hotdippedgalvanisedand PU Paintedto match RAL 9006 grouted in ground. All hardware used for ixing of sign shall beStainless steel. Secret ixing methods should be used to fix parts together.4. Base plate - 300x300x10 mm thick plate mounted on the flooring.ProvidingandlayingfoundationforthesignincludingitscompactionandallactivitieslikeExcavation,PCCbaselayer,providingandfixingin positionelectricalconnectionwhereverapplicableandfinishedasperdrawing.Theitemcostincludescuttingandopeningthefloorfinishat location, and making good the location to the match the original finish after fixing and installation of sign.The actual structural design of the sign for its stability shall be responsibility of the EPC contractor and shall be designed with due consultation and approval from structural designer.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.(Note: Signs placed on internal roads and landscape of Airport to align and manage pedestrian movement.) |
| 8 | 1.3b, Message-3, (Single/Double Sided) (Size 2100 mm x 780 mm.) |
| 9 | 1.3b, Message-4, (Single/Double Sided) (Size 2100 mm x 1040 mm.) |
| 10 | Traffic Statutory SignSign Type 1.4aRefer design drawing 1.4aProvidingandfixingNon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications,signagescheduleandtothesatisfactionoftheEngineer-in-Charge.Allexteriorsignsshouldbemanufaturedconsideringharsh outdoor conditions, weatherproofing techniques and materials shall be used.Sign Face:Providingandfixingsignfacepanels3 mmthickAluminiumsheetfixedtosignstructure.Whiteretro-reflectivevinylpastedover edgetoedge aluminiumsheet.GraphicsinplottercutredPantone485CandblackPantone6Cexteriorgradeopaquevinylpastedoverwhiteretroreflective vinyl. Sign Structure:MS square post 50x50x3mm thick hotdipped galvanised and P.U. painted to match RAL 9006 grouted in ground. The actual structural design of the sign for its stability shall be responsibility of the EP Ccontactor. Secret fixing methods should be used to fix parts together.Foundation:ProvidingandlayingfoundationforthesignincludingitscompactionandallactivitieslikeExcavation,PCCbaselayer,providingandfixingin position finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Sign Size as per TATA Elxsi standards) |
| 11 | Entry I Exit AnnouncerSign Type 1.6bSign Type: Entry/ Exit Announcer Refer design drawing: 1.6bProviding and fixing illuminatedsigns including all operationsfrom fabricationto installationall complete as per drawings, technical specifications,signagescheduleandtothesatisfactionoftheEngineerin-Charge.All exteriorsignsshouldbemanufactured considering harsh outdoor conditions,weatherproofing techniquesand materials shall be used.Portal 50mm wide portal has to be fabricated from 3mm thick ACP, with Yellow Pantone 116C Vinyl Stuck over it Sign Letters 50mm thick 3D cut letters in black glossy acrylic.Sign StructureThe internal structural frame to be made from 50 mm MS box section hot- dipped galvanized PU Painted in colour RAL 9006.LightingAll internal illuminationshall be using LED Lightsof approved make with electronic controllers, having evenspreadand overlapsto avoid banding anddark spotsandadhering to theLUX levels mentioned intheperformance specification. Cost toinclude allinternal connectionsand Wiring,terminatingand connectingthe incoming cable laid by Airport contractor at the site.The actual structural design of the sign for its stability shall be responsibility of the contactor.All hardware used for fixing of sign shall be Stainless steel. Secret fixing methods should be used to fix parts together. |
| 12 | Facility Announcers -Floor Mounted (Four Sided)Sign Type 1.7aRefer design drawing 1.7Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to thesatisfaction of the Engineer-in-Charge. All exterior signs should be manufatured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.»Sign Box: Providing and fixing sign box with lasercut Bent Fabrication in 5mm thick clear acrylic with pantone yellowC Vinyl pasted over acrylic with white diffuser film on inside face. Blackout vinyl for text Pantone Black 6C. Complete box excluding bottom side is lited with internal LED lighting. Acrylic fabrication shall have transparent structural supports for obstruction free lighting. Box to be directly mounted on the sign structure.Bottom panel: Bottom MS Panel powder coated in colour to match Vinyl Black of Pantone Black 6C. Sign Structure. Providing and fixing MS square post 75 x 75 x 3mm, hotdipped galvanised and P.U. painted to match RAL 9006 grouted in ground. The Post shall be always be a single contnuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign in an external location.The actual structural design of the sign for its stability shall be responsibility of the EP Ccontactor.Secret fixing methods should be used to fix parts together. Lighting: All internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. Foundation: Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Size as per TATA Elxsi standards) |
| 13 | Sign Type Code: 1.7dSign Type: Facility Announcers -Passenger Amenities Refer design drawing: 1.7dProviding andfixingilluminated signsincluding alloperations fromfabrication toinstallation allcomplete asperdrawings,technical specifications,signagescheduleandtothesatisfactionoftheEngineer-in-Charge.Allexteriorsignsshouldbemanufactured consideringharsh outdoorconditions,weatherproofing techniquesand materials shall be used.Sign BoxProvidingand fixing sign box with laser cut Bent Fabrication in Smm thick 040 acrylic with pantoneyellow Viny pastedover acrylic with white diffuser film on inside face. Block out vinyl for text Pantone Black 6C. Complete box excluding bottom is lighted with internal LED lighting. Acrylic fabrication shall have transparent structural supports for obstruction free lighting. Box to be directly mounted on the sign structure.Sign Box 2,|?roviding and fixing sign box3 mm thick aluminiumfabrication PU Painted mountedonthe signstructurewithblack colour RAL 9011and provisionfor concealedwiring/cableing for the required telephoneconnectionin the provided niche.Bottom Panel - Bottom MS Panel PU Painted in colour to match Vinyl Black of Pantone Black 6C. Sign StructureProvidingandfixingMShollowsquare50x50x3mmfabrication andfixedtotheground.Frametoreceivethesignfacewith3mmthick Aluminiumsheetfabricationwithspecifiedsuitablecolour,Aluminiumsheetfixed to signstructureasspecifiedinthedrawings.Theactual structuraldesignofthesignforitsstabilityshallbe responsibility of the contactor.Lighting -All internal illumination shall be using LED Lights of approved make or equivalent with electroniccontrollers, havingeven spread and overlapsto avoidbandingand darkspots and adheringto the LUX levels mentionedin the performancespecification. Cost to include all internal connectionsand Wiring, terminatingand connecting the incoming cable laid by Airport contractor at the site.Accessories.Providingand fixing all accessories such as thimbles, end connectors,nut-inserts,screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Size as per TATA Elxsi standards) |
| 14 | Terminal Building Announcer (With Structure)Sign Type 1.8Refer design drawing 1.8Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. All exterior signs should be manufatured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.»Letter faceProviding and fixing White translucent 040, 5mm thick acrylic. complete face shall be covered with translucent vinyl film to match Blue Pantone 541C. Back Channel The channel letters would be made out of 3 mm thick aluminium to receive the front acrylic and house the controller and LEOs with keeping face of theletters 10mm recessed as per drawing.The letter height shall be 900 mm. All the letters would be made in profile to achieve true right angle. All mounting would be done in true plumb and using templet, keeping the alignment of the letters in one level.SpacerRecommended for use for mounting the larger text on the glazing frame LightingAll internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.MS Structure:-MS Structure using vertical member 100x100x3 mmand horizontal member 100x50x3 mm and Diagonal binding support of 100X100X3 mm structural drawing duly approved by structural consultant to be provided.(The Signage shall be \"DEHRADUN AIRPORT\" in Sanskrit (Devnagari script)) |
| 15 | Terminal Building Announcer (Without Structure)Sign Type 1.8Refer design drawing 1.8Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. All exterior signs should be manufatured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.»Letter faceProvidingand fixing White translucent040, 5mm thick acrylic. complete face shall be covered with translucentvinyl film to match Blue Pantone 541C. Back ChannelThe channel letters would be made out of 3 mm thick aluminium to receive the front acrylic and house the controller and LEOs with keeping face of theletters10mmrecessedasperdrawing.The letter height shall be 900 mm. All theletterswouldbemadeinprofiletoachievetruerightangle.Allmountingwouldbedoneintrue plumb and using templet, keeping the alignment of the letters in one level.SpacerRecommended for use for mounting the larger text on the glazing frame LightingAll internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Size 6100 mm. x 900 mm.)(The Signage shall be \"DEHRADUN AIRPORT\" in English (Roman script)) |
| 16 | Terminal Building Announcer (Without Structure)Sign Type 1.8Refer design drawing 1.8Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. All exterior signs should be manufatured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.»Letter faceProvidingand fixing White translucent040, 5mm thick acrylic. complete face shall be covered with translucentvinyl film to match Blue Pantone 541C. Back Channel The channel letters would be made out of 3 mm thick aluminium to receive the front acrylic and house the controller and LEOs with keeping face of theletters10mmrecessedasperdrawing.The letter height shall be 900 mm. All theletterswouldbemadeinprofiletoachievetruerightangle.Allmountingwouldbedoneintrue plumb and using templet, keeping the alignment of the letters in one level.SpacerRecommended for use for mounting the larger text on the glazing frame LightingAll internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Size 6100 mm. x 900 mm.)(The Signage shall be \"DEHRADUN AIRPORT\" in Hindi (Devnagari script)) |
| 17 | Direction Signs - Ceiling Hung Directional SignSign Type Code: 2.1aSign Type: Ceiling Hung Directional Sign Refer design drawing: 2.1aProviding andfixingilluminated signsincluding alloperations fromfabrication toinstallation allcomplete asperdrawings,technical specifications, signage schedule and to the satisfaction of the Engineer-in- ChargeSign face - Sign face shall be made in 5 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut blockoutvinyl shall match the specifiedcolour (colour Pantone Black 6C)andvinylfor textPantoneyellowCorCyan311Caspergraphicsandof specifiedmakedulyapprovedbytheEngineer-in- Charge.Sign Frame- Providingand fixingsign frame50mmwide Powdercoated,colourRAL 9006special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame with 3M branddual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance.Sign Structure- Providing and fixing of aluminium25mm x 25mmx 1.6mm thickhollow sectionsfor structure f/amework of sign frame. Suspender-Providingand fixingStainlesssteel 25x 25mm,1.5mmthickHollowsections(assumingtypical length of 1 meter) mounted on slabs/beams/walls.Lighting-AllinternalilluminationshallbeusingLEDstripedgeLightsofapprovedmakewithelectronic controllers,havingevenspread andoverlapstoavoidbandinganddarkspots.Costtoincludeallinternal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.Accessories- Accessories: Providing and fixing allaccessories such as thimbles, end connectors, nut-inserts,screws,rivets,bolts,washers, nuts, etc. complete as per design drawing. |
| 18 | 2.1a Message 1 (Size 2100 mm. x 260 mm.) |
| 19 | 2.1a Message 2 (Size 2100 mm. x 520 mm.) |
| 20 | 2.1a Message 3 (Size 2100 mm. x 780 mm.) |
| 21 | Sign Type: Floor Mounted Directional Signage Without FIDS1. Sign Face- Graphics- plotter cut blockout vinyl pantone balck 6C, vinyl for text pantone yellow C or Cyan 311C as per graphic, pasted over 3.5mm thick white transulacent 040 acrylic. Graphics as per 2.12. Sign Frame- 70-80mm wide (top swing Open) aluminiumextruction with inbuilt frame to receive the sign face.The panel should be made easily openable for maintainance.3.SignStructure-AllstructuremembersinstainlesssteelHollowboxsection100x100x3mmbrushfinish,with300x300x10mmbaseplate embedded below the floor finish and provided with a floor trim ring. All hardware used for fixing of sign shall be stainless steel.4. Cover Plate- 2mm thick SS cover plate mounted on flooring. Secret fixing methods should be used to fix part together.5. Foundation - Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign.The actual structure design of the sign for its stability shall be responsibility of the EPC contractor and shall be designed with due consultationand approval from structural designer.Lighting-AllinternalilluminationshallbeusingLEDstripedgeLightsofapprovedmakewithelectronic controllers,havingevenspread andoverlapstoavoidbandinganddarkspots.Costtoincludeallinternal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. (Without FIDS) |
| 22 | 2.1b-1 Message 4 (Size 2100 mm. x 1040 mm.) |
| 23 | Sign Type: Floor Mounted Directional Signage (Single/ Double Sided)1. Sign face - Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C , Cyan 311C as per graphics, pasted over 3.5mm thick White translucent 040 acrylic.2. Sign frame -70-80mm wide (top swing Open) aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance.3. Sign Structure: All Structural members in ss hollow box section 100x100x3mm brush finish, with 300x300x10mm base plate embedded below the floor finish and provided with a floor trim ring. All hardware used for fixing of sign shall be ss. Projection supported of small plates 8mm thick and tension rod with threaded ends and turnbuckes for adjustments.Lighting-AllinternalilluminationshallbeusingLEDstripedgeLightsofapprovedmakewithelectronic controllers,havingevenspread andoverlapstoavoidbandinganddarkspots.Costtoincludeallinternal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. |
| 24 | 2.1b-3 3 Message (Size 2100 mm. x 780 mm.) |
| 25 | 2.1b-3 4 Message (Size 2100 mm. x 1040 mm.) |
| 26 | Sign Type: Wall mounted directional signSign face:-Sign face shall be made in 3.5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. The Plotter cut blockout vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge.SignFrame:-Providingandfixingsignframe70-80mmwidepowdercoated,colour RAL9006 specialaluminiumextrusionwith inbuiltframe to recieve the sign face. The panel should be made easily openable for maintainance.The actual structural design of the sign for its stability shall be responsibility of thecontactor. Secret fixing methods should be used to fix parts together.Lighting:-All internal illumination shall be using LED Lights of approved make with electronic controllers, having even spread and overlaps to avoid bandingand dark spotsand adheringto theLUX levelsmentionedinthe performancespecification. Costto includeall internalconnectionsand Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. |
| 27 | 2.1c Message 1 (Size 2100 mm. x 260 mm.) |
| 28 | 2.1c Message 2 (Size 2100 mm. x 520 mm.) |
| 29 | 2.1c Message 3 (Size 2100 mm. x 780 mm.) |
| 30 | 2.1c Message 4 (Size 2100 mm. x 1040 mm.) |
| 31 | 2.1c Message 5 (Size 2100 mm. x 1300 mm.) |
| 32 | Sign Type: Wall Projected Directional Signage Sign Type Code: 2.1dSign Type: Wall Projected directional sign Refer design drawing: 2.1d (Single/ Double Sided)Providing and fixing illuminatedsigns includingalloperationsfromfabricationtoinstallationallcomplete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer in-Charge.Sign face - Sign face shall be made in 5 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut blockoutvinylshall match the specifiedcolour(colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. SignFrame -Providing andfixing signframe 50mmwidepowdercoated,colour RAL9006 specialaluminiumextrusionwithinbuiltframeto recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance.Projection-Projectionsupportedofsmallplatesof8mmthickness.AllhardwareusedforfixingofsignshallbeStainless steel. Theactual structuraldesignof thesign for its stabilityshall be responsibility ofthecontactor. Secret fixing methods should be used to fix parts together. Tension Rod - Providingand fixing minimum 10 mm dia. tension rod in brush finished S.S. with the turn buckle system at both ends. Lighting - All internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid bandingand darkspots.CosttoincludeallinternalconnectionsandWiring,terminatingandconnectingthe incoming cable laid by Airport contractor at the site. |
| 33 | 2.1d Message1 (Size 2100 mm. x 260 mm.) |
| 34 | Wall Mounted Facility AnnouncerSign Type -2.2aRefer design drawing 2.2aProviding and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSign face shall be made in 3.5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. The Plotter cut blockout vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow Cor Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge.Sign FrameProviding and fixing sign frame 70-80mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance.LightingAll internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Secret fixing methods should be used to fix parts together. Accessories: Providingand fixing all accessoriessuch as thimbles, end connectors,nut-inserts, screws, rivets,bolts, washers,nuts, etc. complete as per drawing.(Sign Size as per TATA Elxsi standards) |
| 35 | Door Mounted Facility AnnouncerSign Type- 2.2cRefer design drawing 2.2cProvidingandfixingNon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign face:Sign face shall be made in 3.5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. The Plotter cut vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge.Sign Frame:Providing and fixing sign frame 25 mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M bothway tape from the other side.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Sign Size as per TATA Elxsi standards) |
| 36 | Ceiling Hung Counter No. Non-LitSign faceSign face shall be made in 3mm thick ACP having graphics pasted in Plotter cut vinyl. The Plotter cut vinyl colour Pantone C for text colourPantone Black6Casper graphicsandof specifiedmakedulyapprovedbytheEngineer-in-Charge.Signface shallbe providedwith throughand through cutout to accomodate 32\" FIDS.Sign FrameProviding and fixing Stainless steel 304 25x25x1mm Hollow sections of required length & height with adjustable method mounted on existing FIDS Frame.Accessories:Providingandfixingallaccessoriessuchasthimbles,endconnectors,nut-inserts,screws,rivets,bolts,washers,nuts,etc. complete as per Engineer-in-Charge. (Sign Size as per TATA Elxsi standards) |
| 37 | Boarding Gates -Wall MountedProvidingand fixing illuminatedsigns includingall operationsfrom fabricationto installationall completeas per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer in-Charge.Sign face -Sign faceshall be madein 5 mm thick040 whiteacrylic(asspecified)havinggraphics pastedin Plotter cut Blockout vinyl. The Plottercutblockoutvinylshaftmatchthespecifiedcolour(colourPantoneBlack6C)andvinylfortextPantoneyellowCorCyan311Casper graphics and of specified make duly approved by the Engineer-in- Charge.SignFrame-Providing andfixingsignframe 50 mmwidepowdercoated,colour RAL9006 specialaluminiumextrusionwithinbuiltframeto recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand Dual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance.Lighting-Allinternalilluminationshallbeusing LEDstripedgeLightsofapprovedmakewithelectronic controllers,havingevenspread andoverlapstoavoidbandinganddarkspots.Costtoincludeallinterna connections and Wiring, terminating and connecting the incoming cable laid by Airport contractorat the site. The actual structural design of the sign for its stabilité shall be responsibility of the contactorand shaft be designed with due consultation and approval from structural designer.AII hardware used for fixing of sign shall be Stainless steel. Secret fixing methods should be used to fix parts together.Accessories- Providing and fixing all accessoriessuch as thimbles, end connectors, nut-inserts,screws , rivets, bolts, washers, nuts, etc. complete as per design drawing. |
| 38 | 2.2g-3 Message1 (Sign Size 2100 mm. x 260 mm.) |
| 39 | 2.2g-3 Message1 (Sign Size 1800 mm. x 600 mm.) |
| 40 | Washroom I Drinking Water I Baby careSign Type -2.4aRefer design drawing 2.4aProviding and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSign face shall be made in 3.5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blackout vinyl. The Plotter cut blackout vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign FrameProviding and fixing sign frame 70-110mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame withthe3Mbrandduallocksysteminonesideand3Mbothwaytapefromtheotherside.Thepanelshouldbemadeeasilyopenablefor maintainance.LightingAll internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Secret fixing methods should be used to fix parts together.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Sign Size as per TATA Elxsi standards) |
| 41 | 2.4a2 -Wall mounted (Single side content -Sign Face: acrylic, and Back: 3mm ACP) |
| 42 | 2.4a2 -Wall Projected (Single side content -Sign Face: acrylic, and Back: 3mm ACP) |
| 43 | Service AreasSign Type -2.4bRefer design drawing 2.4bProvidingandfixingnon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceDigitally printed Graphics on vinyl pasted on 3mm thick black acrylic mounted on walls/calddings/ panelllings using VHB Tape(Sign Size as per TATA Elxsi standards) |
| 44 | Lift No. Sign Sign Type -2.4cRefer design drawing 2.4cProviding and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSign face shall be made in 3.5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blackout vinyl. The Plotter cut blackout vinyl shall match the specified colour (colour Pantone Black6C) and vinyl for text Pantone Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign FrameProviding and fixing sign frame 70-80mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face.Thesignfaceshallbe fixedto signframe withthe 3Mbrandduallock system.Thepanel shouldbe madeeasily openablefor maintainance. LightingAll internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Secret fixing methods should be used to fix parts together.Accessories:Providingandfixingall accessoriessuchasthimbles,endconnectors,nut-inserts,screws,rivets,bolts,washers,nuts,etc. complete as per drawing.(Sign Size as per TATA Elxsi standards) |
| 45 | 2.4 c2 Wall mounted (Single side content- Sign Face: acrylic, and Back: 3mm ACP) |
| 46 | Sign Type -2.5ProvidingandfixingNon-illuminatedsignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings,technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign FaceDigitally printed Graphics on vinyl pasted on 3mm thick black acrylic mounted on walls/calddings/ panelllings using VHB Tape(Sign Size as per TATA Elxsi standards) |
| 47 | Poster Size A2 Sign Type -2.5bRefer design drawing 2.5b G |
| 48 | Poster Size A3 Sign Type - 2.5cRefer design drawing 2.5c G |
| 49 | Poster Size A4 Sign Type -2.5dRefer design drawing 2.5d G |
| 50 | Emergency Direction Signs - Illuminated Sign Type- 2.6aRefer design drawing 2.6aProvidingand fixing illuminatedemergency signsincludingall operationsfrom fabrication to installationall complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSign face shall be made in 3.5mm thick Laminated acrylic (as specified) having graphics pasted on the inside with transluscent white vinyl pasted over plotter cut Transluscent vinyl. The Plotter cut transluscent vinyl to match the specifiedcolour (colour Pantone XXXX) and of specified make duly approved by the Engineer-in-Charge.Sign BoxThe sign box 70-80 mm deep shall be made out of 1.6 mm thick CRCA MS sheet fabricated and provided with same material support channel and ties welded to sign channel. All fabrication shall be done using CNC machines. Sign box shall be provided with openings with Mesh from inside for ventilation. Complete sign box including channel supports are to be powder coated to match RAL9016. Sign box flange receiving the sign face shall be provided with slots to receive the rivets to fix the sign frame.LightingAll internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots.Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.(Sign Size as per TATA Elxsi standards) |
| 51 | 2.6a-1 Exit |
| 52 | 2.6a-2 Emergency Exit |
| 53 | Emergency Signs - Photoilluminiscent Sign Type -2.6bRefer design drawing 2.6bProviding and fixing all Photoluminiscent signs in the dedicated fire escape passages of the airports as per locations given in sign schedules, made of screen printing using artworks provided and with photoluminiscent material as per technical specifications.Screen printing shall be done on self adhesive vinyl and pasted on 2mm thick powdercoated white (RAL 9016) aluminium plate and fixed at location using screws. as per specification andusingprovidedartworkincludingalloperationsfromprocuringthecorrectmaterialsandmadetosizesasspecifiedandapprovedbythe Engineer-in-charge. including all installation activities like marking, alignment and fixing with screws into the wall/cladding/face to the satisfaction of the Engineer-in-Charge.(Sign Size as per TATA Elxsi standards) |
| 54 | 2.6b-1 - FHC, Fire Alarm, Fire Extingusiher |
| 55 | 2.6b-2 - Fire doors inside |
| 56 | 2.6b-3 - Fire doors outside |
| 57 | 2.6b-4 -At lifts |
| 58 | 2.6b-5- Emergency escape direction sign |
| 59 | Direction to assembly pointSign Type -2.6c-1Refer design drawing 2.6cProvidingandfixingNon-illuminatedemergencysignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSigns graphics in exterior grade plotter cut opaque vinyls, made of screen printing using artworks provided and with photoluminiscent material as per technical specifications. Screen printing shall be done on self adhesive vinyl pasted over panels made out of 3mm thick aluminium, Powder coated in white, mounted over central structure using aluminium rivets.Sign FrameInternal MS structure receiving the signs faces using equal angles, hot-dipped galvanised and welded to the sign post. Sign Post 75x75x3 mm MS post PU painted to match RAL 9011 grouted in ground with concrete footing as per detaii. The actual structural design of the sign for its stability shall be responsibility of the EPC contactor.FoundationProvidingandlayingfoundationforthesignincludingitscompactionandallactivitieslikeExcavation,PCCbaselayer,providingandfixingin positionelectricalconnectionwhereverapplicableandfinishedasperdrawing.Theitemcostincludescuttingandopeningthefloorfinishat location, and making good the location to the match the original finish after fixing and installation of sign.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.(Sign Size as per TATA Elxsi standards) |
| 60 | Assembly pointSign Type -2.6c-2Refer design drawing 2.6cProvidingandfixingNon-illuminatedemergencysignsincludingalloperationsfromfabricationtoinstallationallcompleteasperdrawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign faceSigns graphics in exterior grade plotter cut opaque vinyls, made of screen printing using artworks provided and with photoluminiscent material as per technical specifications. Screenprinting shall be done on self adhesive vinyl pasted over panels made out of 3mm thick aluminium,Powder coated in white, mounted over central structure using aluminium rivets.Sign FrameInternal MS structure receiving the signs faces using equal angles, hot-dipped galvanised and welded to the sign post. Sign Post 75x75x3 mm MS post PU painted to match RAL 9011 grouted in ground with concrete footing as per detaii. The actual structural design of the sign for its stability shall be responsibility of the EPC contactor.FoundationProvidingandlayingfoundationforthesignincludingitscompactionandallactivitieslikeExcavation,PCCbaselayer,providingandfixingin positionelectricalconnectionwhereverapplicableandfinishedasperdrawing.Theitemcostincludescuttingandopeningthefloorfinishat location, and making good the location to the match the original finish after fixing and installation of sign.Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.(Sign Size as per TATA Elxsi standards) |
| 61 | Emergency Signs -Fire life safety layout Sign Type -2.6dRefer design drawing 2.6dProviding and fixing all Photoluminiscent signs in the dedicated fire escape passages of the stations as per locations given in sign schedules, made of screen printed signs on white vinyl pastedovera2mmthickaluminiumsheetpowdercoatedinWhite(RAL9016)asperspecificationandusingprovidedartworkincludingall operations from procuring the correct materials and made to sizes as specified and approved by the Engineer-in-charge. including all installation activities like marking, alignment and fixing with screws into the all/cladding/face to the satisfaction of the Engineer-in-Charge.(Sign Size as per TATA Elxsi standards) |
| 62 | Providing Plotter cut Blockout vinyl on existing internal signages after removing vinyl stickers/ films pasted on them. The jobwork include removing connections (in case of illuminated signages) , dismantling of signages, removing vinyl stickers/ films pasted on existing signage, duly cleaning the base sheet, properly pasting new vinyl signages, refixing the signages, reinstalltion and making the connection (in case of illuminated signages) in an approved manner. The Plotter cut blockoutvinyl shall match the specifiedcolour as prescibed for background and text as per graphics, as per site requirement and as directed by Engineer-In-Charge. The vinyl shall be of specifiedmakedulyapprovedbytheEngineer-in- Charge. |
| 63 | Providing white retro-reflective film and Graphics in Plotter RAL:5013 Exterior grade opaque vinyl pastedover white retro-relective vinyl after removing signage films froms existing external signage including all ancillary works such as dismatling, removing old films/ vinyl, cleaning base sheet, pasting new films/ vinyl, reinstallting the signages etc. as required. The graphics and make of vinyl/ films shall be as approved by the Engineer-In-Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
