|
| 1 | BOQ |
| 2 | Supplying and erecting approved make 33 kV, 1600A HT Panel consisting of 1 incomer and 1 outgoing Vacuum Circuit breaker of required rating, on provided MS channels / trench / foundation in an approved manner as per MSEDCL specification |
| 3 | Supply, erection, testing & commisisoning of Oil Transformer 33/0.433kV rated 1600kVA DYn11 as per IS-2026 withTap Switch tapping range +5 to -5% @ 2.5%.ONAN cooled class A insulation, with temp rise of OIL as 40°Cand Winding as 45°C over ambient of 45°C, Max altitude of 1000m. Few of the Standard accessories provided are: 1) 3nos. Porcelain HV bushing 2) 4nos. Porcelain/ Epoxy bushings 4) TOP filter valve with plug 5) 4nos. Jacking pads 6)2nos. Earthing terminals 7)oil filling 8) PRV w/o contacts 9) lifting lugs 10) Oil level indicator 11) Drain valve12) one no. OTI 13) one no. WTI with CT’ |
| 4 | Supplying, installing, testing and commissioning 33 kV 630A, outdoor type ring main unit with (1LBS + 3VCB) Breakers with internal arc compliance complete erected |
| 5 | Supply, instalaltion, testing & commissioning ofMain L T PCC Panel Floor Mounted, Compartmentalized, dust & vermin proof construction,made out of 14/16 gauge CRCA sheet, duly finished in powder coating,after proper surface treatment using seven tank process and with ABB make Switchgear as per below details in BOM. Panel is with Aluminium busbars INCOMERCOMPRISSING OF :- 1) 4000A 4P EDO ACB With LSIG Protection Microprocessor Based 2) UNDER VOLTAGE RELEASE 380/400V 3)TNC Switch For Breaker4) Multifunction Meter, Class-0.5, 3PH 4 Wire, With RS485 5)3PH Digital Ammeter 6) 3PH Digital Voltmeter 7) CT 6000/5A, 15VA, Class-1 For Metering8) CT 6000/5A, 15VA, Class-1 For APFC R Phase Indication 9) Lamp - RED 10) Y Phase Indication Lamp - YELLOW 11) B Phase Indication Lamp - BLUE 12) ACB ON Indication Lamp - RED 13) ACB OFF Indication Lamp - GREEN 14) ACB TRIP Indication Lamp - AMBER 15) EXHAUST FAN 14\" 16) 6A SP Control MCB 17) 6A 2P MCB C-CURVEOUTGOING FEEDERS :- 1) 630A 3P MCCB2) 630A 3P MCCB TMD, 50KA 3) Extended ROM for T6 MCCB 4) Auxillary + Trip Block For MCCB 5) Multifunction Meter 6) CT 800/5A, Class-1, 15VA For Metering, Tape Wound CT 7) ON Indication Lamp - RED 8) OFF Indication Lamp - GREEN 9) TRIP Indication Lamp - AMBER 10) 6A 2P MCB C-CURVE 11) 6A SP Control MCB |
| 6 | Supply and erection of 33 KV double pole cutpoint structure inclusive RJS Pole, Channel Guarding, PIN Insulators, DOG conductor, hardware, etc. complete as per MSEDCL specification |
| 7 | Supply and erection of 33 KV 800 Amp ISOLATOR with structure without EB as per MSEDCL specifications |
| 8 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (ROUND) cable 33 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 9 | Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete of Compact Substation, RMU, etc. |
| 10 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 11 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP |
| 12 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete |
| 13 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 14 | Providing and erecting Touchproof Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x up to 300 sq. mm. with necessary material. (Make: Raychem/Equivalent) |
| 15 | Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E)/33 kV (UE) XLPE HT cable 3x300 sq. mm. to 400 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 16 | Providing and erecting Heat shrinkable outdoor termination kit for 33 kV (E)/33 kV (UE) XLPE HT cable 3x300 sq. mm. to 400 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 17 | Supplying and erecting outdoor stand mounted feeder pillar of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete |
| 18 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 19 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
