|
| 1 | Supply and fixing in repairsthermostat adjustable type suitable for geyser 25/35/50 Ltr capacity complete all as specified and directed |
| 2 | M & L for servicing of AC\"s split type of capacity 1 /1.5 / 2.0 TR inner & outer unit of any make, any type cleaning of outdoor condenser unit,indoor unit cooling coil, with chemical solution c-shineor equivalent and high pressure water jet pump, greasing to condensor fan, checking, tightning all electrical connections, washing of air filter, oiling and tightening of all nut, bolts, etc completeall as directed. |
| 3 | M & L for servicing of AC’s window type of capacity 1.5 / 2.0TR of any make, any type by taking down AC, cleaning ofcondenser coil andcooling coilswith chemical solution c-shineor equivalent and high pressure water jet pump, greasing to condensor fan, checking, tightning all electrical connections, washing of air filter, oiling and tightening of all nut, bolts etc completeall as directed. |
| 4 | M&L for replacement of compressor sealed unit of capacity 1.0 / 1.5/2.0 TR unit suitable for existing air conditioners window any type, any technology including taking out old unserviceable compressor, cleaning, flushing, vaccumizing the system, charging of suitable refrigerant gas in adequate quantity, soldering, brazing of suction, discharge and charging line complete all as specified and directed.Make:- Kirloskar/ LG/ Toshiba/ Hitachi/ Carrier/ Tecumseh/ EMERSON COPELAND/ WHIRLPOOL/ MITSUBISHI |
| 5 | M&L for replacement of compressor sealed unit suitable for existing air conditioner split type of capacity 1.5/2.0 TR, any technology, any type in outdoor unit including taking out old unserviceable compressor, cleaning flushing, vaccumizing the system, charging of suitable gas in adequate quantity, soldering/ brazing of suction, discharge and charging line complete all as specified and directed.Make:- Kirloskar/ LG/ Toshiba/ Hitachi/ Gujral/ Carrier/Tecumseh/ Usha Shri Ram/ EMERSON COPELAND/ WHIRLPOOL/ Mitsubishi |
| 6 | Supply,replacement, connecting and testingof double shaft blower motor 240 volts, single phase suitable for window type AC 1.0/ 1.5/2 TR as per existing type and size complete all as specified and directed.Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal/ Airmaster |
| 7 | Supply, replacement, connecting and testing of condenser blower motor suitable for 1.5 /2TR split AC 240 volts single phase, all as directed.Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal/ Airmaster. |
| 8 | Supply, replacement, connecting and testing of indoorblower motor suitable for 1.5/ 2 TR split AC 240 volts single phase, all as directed.Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal/ Airmaster. |
| 9 | Supply, replacement, connecting and testing of indoorblower drum suitable for 1.5/ 2 TR split AC 240 volts single phase, all as directed. |
| 10 | Supply and replacement of blower drum as per sample suitable for existing 1.0/ 1.5/2 TR Window AC all as directed. |
| 11 | Supply and fixing in replacement of temperature sensor as per existing type and size suitable for 1.0/1.5/2 TR window/splitAC complete all as specified and directed. |
| 12 | Supply and fixingin replacement of starting/running capacitorsuitable for 1.0/1.5/2 TR window/split AC complete all as specified and directed.Make: Havells/ Unistar/ Asian/ EPCOS/ Sarda/BAJAJ |
| 13 | Material & labour for charging of refrigerant gas in window typeAC 1.5/ 2 Ton capacity including vaccumizing, leakage test and rectification of leakages etc complete all as directed. |
| 14 | All as per item No 13.00 here-in-before but for split type AC of capacity 1.0/1.5/ 2 TR |
| 15 | Material & labour for top-up of suitable refrigerant/ gas (R-22/ R-32/R-410) in split AC/ window typeAC 1.5/ 2 Ton capacity to ensure the proper cooling effect etc complete all as directed. |
| 16 | Supply & fixing in replacement indoor unit of hi-wall split 1.5 Ton including cooling coils, PCB plate and display, remote control, cooling fan motor with blade, blower drum, complete with all accessories suitable for make Voltas/ Blue Star/ Samsung/ LG complete including taking out old unit including cutting, brazing and testing all as specified and directed. |
| 17 | All as per item No 16.00 here-in-before but for capacity 2.0 Ton all as specified and directed. |
| 18 | M&L for refixing of condensed water pipe line flexible type from cooling unit for drain including necessary clamps, joint reparing with solutions and make it leak proof all as directed. |
| 19 | S&F in repair MCB single pole 6-32 Amps, B curve10 KA all as directed. |
| 20 | Repair of Electronic PCB Board for non inverter AC of any make/ any type all as specified and directed. |
| 21 | Repair of Electronic PCB Board for inverter AC of any make/ any type indoor/ outdoor unit all as specified and directed. |
| 22 | S&F in replacement universal remote for any make/type of AC all as specified and directed. |
| 23 | S& F in replacement flare nut of size as per existing including necessary flaring of copper tubing complete incl cutting etc and tightning complete. |
| 24 | S&F in replacement service valve for any make, any type of AC all as specified and directed. |
| 25 | Supply & fixingin replacementPCB remote plate DC operation suitable for hot and cold operation of AC Window type 1.5 /2 TR of any complete with remote all as specified and directed. |
| 26 | Supply and fix single pole and neutral sheet metal enclosure with two pin and earth metal plug top and socket complete with and including single pole MCB 20 Amps |
| 27 | Supply & fixing in replacement of window AC top cover of size made of 1.6mm thick GI sheet, suitable for AC of capacity 1.5/2.0 TR of make LG/ Voltas/ Sidwal/ Carrier/ Blue star as per site requirement and as specified and directed. |
| 28 | Supply & fixing in replacementof copper pipe for suctionline suitable for AC split type of capacity 1.5/2TR including cutting and soldering, brazing etccomplete all as specified and directed. |
| 29 | Supply & fixing in replacementof copper pipe for dischargeline suitable for AC split type of capacity 1.5/2TR including cutting and soldering, brazing etccomplete all as specified and directed. |
| 30 | Supply & fixing in replacementofheavy duty nitrile rubber insulation for suitable for split type AC capacity 1.5/2 TR copper piping with wrapping with packing brown tapeincluding opening pipe connections/ tightning, cutting etc complete all as specified and directed. |
| 31 | Supply & fixing in replacement front grill suitable for AC window mounted type of capacity 1.5/2.0 Ton all as per existing type and size complete all asspecified and as directed. |
| 32 | S&F in replacement cooling coil/ condensing coil set made out of copper pipe and fins suitable for window AC of capacity 1.5/2 TR all as per existing type and size including cutting soldering and testing complete all as specified. |
| 33 | S&F in replacement cooling coil/ condensing coil made out of copper pipe and fins suitable for split AC window of capacity 1.5/2 TR all as per existing type and size including cutting soldering and testing complete all as specified. |
| 34 | Supply & fixing in repair capillary and filter suitable for AC window/ Split type of capacity 1.5/2 TR including cutting, soldering, brazing etc complete all as specified and directed. |
| 35 | Supply & fixing in repair expansion valve suitable for AC window/ Split type of capacity 1.5/2 TR including cutting, soldering, brazing etc complete all as specified and directed. |
| 36 | S&F in repair air filter suitable for window/split AC all as directed. |
| 37 | S&F in repair reversible valve 4 way with plunger AC 230 volts 50 c/s as per existing make and type suitable for split/window type AC of capacity 1.5 / 2.0TR including repair/ modification to remote plate, cutting, soldering, brazing complete including charging if gas required to maintain the required pressure complete all as specified and directed.Note: Cost of all modification required including changes in wiring connections and gas cycle system are deemed to be included in item rate. Nothing shall be paid extra on account of this. |
| 38 | M&L for repairing of voltage stabilizer of capacity 4/5 KVA by opening up and checking the fault, replacing necessary spares and make it functional all as specified and directed. |
| 39 | M&L for repairing of voltage stabilizer of capacity 1-3 KVA by opening up and checking the fault, replacing necessary spares and make it functional all as specified and directed. |
| 40 | Supply & fixing in replacement of voltage stabilizer copper wounded for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 Vof capacity 16 Amp rating complete all as specified and directed.Makes: V-Guard/Blue Star/ Logicstat. |
| 41 | All as per item No. 40.00 here-in-before but of cap 12 Amp rating. |
| 42 | M&Lin replacement PVC insulated and sheathed multi stranded copper conductor wire of size 3 core, 1.5 Sqmm complete all as specified and directed. |
| 43 | M&Lin replacement PVC insulated and sheathed multi stranded copper conductor wire of size 3 core, 2.5 sqmm complete all as specified and directed. |
| 44 | M&Lin replacementPVC insulated and sheathed multi stranded copper conductor wire of size 3 core, 1.0 sqmm, ISI marked complete all as specified and directed. |
| 45 | Taking down old unserviceable sealed compressorand supply & fixing ofnewcompressor sealed unit suitable for water cooler 150/150 Ltrs capacity including cleaning, vaccumizing, gas charging of adequate quantity and testing on load complete all as specified and directed.Make: USHA / Sriram /Emerson / Kirloskar/ Carrier/ Tecumseh/ Whirlpool/ EMERSON COPELAND/ Mitsubishi. |
| 46 | All as per description of Srl item No 45.00 here-in-before but sealed unit compressor suitable for water cooler capacity 60/120 Ltrs |
| 47 | All as per description of Srl item No 45.00 here-in-before but sealed unit compressor suitable for water cooler capacity 40/80 Ltrs |
| 48 | M&l for charging of refrigerant gas for water cooler 40 Ltr to 150 Ltrs capacity including cleaning, vaccumizing, detecting and repairing refrigerant leakage, gas charging of adequate quantity and testing on load complete all as specified and directed. |
| 49 | M&L for repair to body of water cooler/ refrigerator/ deep freezers of any capacity by fixing of SS sheet with angle iron/ MS flat etc all as per existing sizes including cutting, welding, riveting, drilling, bending to shape etc, at site including grinding, finishing and applying of one coat of primer complete all as specified and as directed.Note : Transportation of equipments/ T&P required at site will be responsibility of the contractor, nothing shall be paid extra on this account. |
| 50 | S&F in repair desert cooler stand made out of MS angle iron of size as directed including cutting and welding, painting with two coat of synthetic enamel paint over a coat of red oxide primer all as directed. |
| 51 | Supply and replacement of water tap brass CP with inner/outer threads push type or with rotary knob of size 15 mm / 20mm dia as per existing type and size complete all as specified and directed. |
| 52 | Supply and fixingin replacement of thermostat switch suitable for water coolers complete all as specified and directed.Make : Danfoss/ Renutrol/ Indfoss or equivalent |
| 53 | Supply and fixingin replacementof starting relay suitable for water coolers of capacity 150 Ltrs/120 Ltr/80Ltr/40 Ltr complete all as specified and directed.Make :- Danfoss/Renutrol/ Indfoss or equivalent. |
| 54 | Supply & fixingin replacement of starting/running capacitor suitable for water coolers 150 ltrs/120 Ltr/80Ltr/40 Ltr complete all as specified and directed.Make :- USHA/UNIVERSAL/ HAVELLS/EPCOS/ sarda or equivalent. |
| 55 | S&Fin replacement of overload protector suitable for water cooler of capacity 150/120/80 Ltrs complete all as specified and directed.Make :- Danfoss/Renutrol/ Indfoss or equivalent. |
| 56 | Supply & fixingin replacementfin type condenser with copper pipes suitable for water cooler of capacity 40/80 Ltr to 60/120 Ltr as per existing type and size including cutting, soldering/ brazing etc complete all as specified and directed. |
| 57 | All as per item No. 56.00 here-in-before but of capacity 150/150 Ltrs. |
| 58 | Taking down old and unserviceable sealed compressor and supply and fixing new sealedcompressor unit for refrigerator of capacity 250 to 360 Ltrs includingcleaning, vaccumizing, suitable gas charging adequate qtyin the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and directed.Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier/EMERSON COPELAND/ WHIRLPOOL |
| 59 | All as per item No 58.00 above but for Refg of capacity 165-240 Ltr . |
| 60 | Taking down old and unserviceable sealed compressor and supply and fixing new sealedcompressor unit for deep freezer of capacity 400-500 Ltrs includingcleaning, vaccumizing, gas charging of adequate qtyin the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and directed.Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier. |
| 61 | All as per item No 60.00 above but for deep freezerof capacity 200-320 Ltr . |
| 62 | S&F of evaporative coil ( cooling coil ) ofrefrigerators of capacity 260-360 Ltrs as per existing type and size including cutting, taking out to old coil, brazing/ soldering and testing complete all as specified and directed. |
| 63 | All as per item No 62.00 above but for refrigerator of capacity 165-230 Ltr . |
| 64 | S&F magnetic door gasket suitable for refrigerator of capacity 165 to 360 Ltrs as per existing type and size complete all as specified and directed. |
| 65 | Supply and fixing thermostat switch suitable for refrigerator of capacity 165 to 360 Ltrs as per existing size and type complete all as specified and directed.Make :- Danfoss/ Renutol/ Indfoss or equivalent. |
| 66 | Supply and fixing of starting relay with over load protector kit complete as per existing size and type complete all as specified and directed Make :- Danfoss/ Renutol/ Indfoss or equivalent. |
| 67 | M&L for repair of PCB of double door refrigerator all as directed. |
| 68 | Material & labour for charging refrigerant gas of existing type in refrigerator of capacity 165 to 360 Ltr including vaccumizing, leakage test and rectification of leakage etc complete all as specifiedand directed. |
| 69 | All as per item No 68 above but for deep freezerof capacity 200 Ltr-500Ltr . |
| 70 | S&F in replacement cooling motor with fan suitable to operate on AC,220/240 volts, 50 c/s complete with frame all as per existing size/type suitable for water cooler any capacity all as specified and directed |
| 71 | M&L for condensing coil fan motor suitable for deep freezer 200 Ltr to 500 Ltr cap complete. |
| 72 | Material & labour for top-up refrigerant gas of existing type in refrigerator of capacity 165 to 360 Ltr/ Deep feezer 200 Ltr to 500 Ltr and water cooler any cap including with reqd wk complete all as specifiedand directed. |
| 73 | M & L for de-scaling of collector unit and piping complete and testing of solar water heaters of capacity 100 to 300 LPD complete all as specified and directed. |
| 74 | M & L for de-scaling of collector unit andpiping complete and testing of solar water heaters of capacity 400/500 LPD complete all as specified and directed. |
| 75 | M & L for de-scaling of collector unit andpiping complete and testing of solar water heaters of capacity 1000 LPD complete all as specified and directed. |
| 76 | Supply and fixing in repair ofsolar water heating element 2 KW Single phase, 230 Volts, as per existing type and size complete all as specified & directed. |
| 77 | Supply and fixing in repair ofsolar water heating element 3 KW Single phase, 230 Volts, as per existing type and size complete all as specified & directed. |
| 78 | Supply and fixing thermostat switch suitable forsolar water heaterof capacity 100-1000 LPD all as per specified as per existing type and sizecomplete all as specified & directed. |
| 79 | S & F in repairheat collector toughened glass of any size suitable for solar water heaters of capacity 100-1000 LPD as per existing type and thickness as per existing complete incl cutting to size, fixing with suitable adhesive completeall as specified & directed |
| 80 | M & L for replacement of copper pipe of exiting size/ dia for header in collector of solar water heaters of capacity 100 LPD to 1000 LPD including cutting, soldering, insulation and testing complete all as specified and directed. |
| 81 | M&L painting of solar water heater MS structure by removing of old paint and preparing surfaces for repainting and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 82 | Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 and all around covered with jute cloth and tape complete suitable for pipe of dia 15 to 25mm dia bore complete. |
| 83 | M&L for aluminium cladding 0.46 mm to 0.6 mm thickness for covering glass insulation complete all as directed |
| 84 | M&L for Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 15mm bore. |
| 85 | M&L for Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 20mm bore. |
| 86 | M&L for Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 25mm bore. |
| 87 | M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore. |
| 88 | M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore. |
| 89 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 ltrs all as specified in SSR Part I. |
| 90 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltrs all as specified in SSR Part I. |
| 91 | M&L painting of desert cooler internally and externally complete including removing of old paint and preparing surfaces for painting and applying two coats of synthetic enamel paint by using spray gun complete all as specified and directed. |
| 92 | Supply and fixing front air grill of desert cooler complete as per existing type and sizeall as specified and directed. |
| 93 | Supply & fixing in replacement of desert cooler fan motor 1/8 HP, copper wound, three speed with suitable cap capacitor suitable for desert coolercomplete all as specified and directed.Make: Khaitan/ CG/ Bajaj/ Airmaster/ Summer coolNote: The contractor shall procure min 70 % qty of this item within 30 days from date of commencement. A recovery of Rs 100/- per day shall be levied in case contractor fails to procure the same. |
| 94 | Supply & fixing in replacement ofsubmersible water pump of capacity 18 watt, single phase, 220 V suitable head and flow for desert cooler with connecting wire complete all as specified and directed.Make: Universal/ Khaitan /CG/Havells |
| 95 | Supply & fixing in replacement ofdesert cooler PVC pipe 1 Mtr min from water pump to PVC distributor incl PVC distributor and 3 Nos PVC bend complete all as specified and directed. |
| 96 | Supply and fixing in replacement Wood wool pad (superior quality) at site for desert cooler any size / cap complete all as specified and directed. |
| 97 | Supply & fixing in replacement Starting capacitor 4.0 mfd heavy duty suitable for desert cooler complete all as specified and directed.Make: Usha/ Tibeon/ Keltron/ Asian/ Havells/ EPCOS/BAJAJ |
| 98 | Material and labour for replacement of outer body of desert cooler as per existing type and size of standard size having 3 side covers & front cover made of 24 gauge GI sheet, front grill with sheet for mounting of switches suitable for desert cooler of capacity 4000 Cum/Hr duly painted complete internally and externally with two coats of super enamelled paint over a coat of red oxide primer all as specified and directed. |
| 99 | Material and labour for replacement of tank of 1mm thick sheet min, suitable for desert cooler of capacity 4000 Cum/Hr duly painted complete internally and externally with two coats of super enamelled paint over a coat of red oxide primer all as specified and directed. |
| 100 | S&F in repairs switch piano flush type, 5 Amps, AC single pole, one way complete all as specified. |
| 101 | S&F repairs switch piano flush type, 15 Amps,AC single pole, one way complete all as specified. |
| 102 | S&F in repairs socket out let 5 Amp, 5 pinflush type complete all as specified. |
| 103 | S&F in repairs Socket outlet multi purpose 2 in 1, 3 pin, 5 & 15 Amps, flush type complete all as specified |
| 104 | Supply & fixing in replacement Top plug 6 Ampall as specified and directed. |
| 105 | Supply & fixing in replacement Top plug 16 Ampall as specified and directed. |
| 106 | Supply & fixing in replacement outdoor unit of hi wall split of capacity 1.5 Ton including condenser coil copper, with cooling fins, condensor blower motor with blades, PCB plate with complete wiring, including compressor, charging of refrigerent gas, testing and commissioning of Make Voltas/ Blue Star/ Samsung/ LG complete including taking out old unit including cutting, brazing and testing all as specified and directed. |
| 107 | All as per item No 106.00 here-in-before but outdoor unitof capacity 2.0 TR. |
| 108 | Supply and fix in replacement for CPVC pipe SDR 11 for drain pipe of ACs condensed waterfixed complete to walls, ceilings or in floors etc. of size 40mm dia along withsockets, Tees, Bends, Elbows,wall clamps,necessary joining material other accessories required for fixing of pipe with wall/floor all as specified and directed. |
| 109 | All as per srl item no. 108 above but of size 25 mm dia. |
| 110 | Taking down existing Split AC 1.5/2.0 TRindoor unit and out door unit complete by disconnecting, storing refrigerant in suction and discharge lines, opening nuts and bolts taking out brackets ofindoor and outdoor unit from walls, taking out Voltage stabilizer from wall, reinstall to another location without damaging the AC and testing complete all as specified and directed. |
| 111 | S&F in replacement Brackets for fixing split AC 1.5/2.0 TR out door unit with walls made of MS duly powder coated factory made with bolts, nuts and washers and 04 Nos of fastenerscomplete all as specified and directed. |
| 112 | S&F in replacement Floor Standfor fixing split AC 1.5/2.0 TR out door unit made of MS duly powder coated factory made withbolts, nuts and washers and 04 Nos fastnerscomplete all as specified and directed. |
| 113 | M&L for shifting of window type AC 1.5 / 2.0 TR by taking out AC from one room and shifting it to another location within 500 mtr and fixing it at place where directed by department all as specified and directed. |
| 114 | M&L in repairs Submain wiring with two run of single core FRLS PVC insulated unsheathed multi stranded copper conductor cable4.0 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with fittings including earth continuity FRLS copper conductor 4.0 Sqmm PVC insulated with green insulation complete all as specified including taking down existing unserviceable/burnt submain and making good disturbed surfaces complete. |
| 115 | M&L in repairs Submain wiring with PVC insulated cable copper conductor FRLS two single core 6.0 Sqmm drawn through and including PVC rigid non metallicconcealed conduit (medium grade) with all fittings including earth continuity FRLS copper conductor 6.0 Sqmm PVC insulated with green insulation complete all as specified including taking down existing unserviceable/burnt submain and making good disturbed surfaces complete. |
| 116 | Supply,laying, testing and commisioning in replacement of Service wire made of PVC insulated sheathed, electric cables ( heavy duty) 1100 volts grade with aluminium conductor of size 4.0 sq mm 2 core complete. |
| 117 | Supply,laying, testing and commisioning in replacement of Service wire PVC insulated sheathed electric cables ( heavy duty) 1100 volts grade with aluminium conductor of size 6.0 sq mm 2 core complete. |
| 118 | M & L for cleaning/descalingofgeyser of capacity 25/35/50 ltr of any make, with chemical solution, checking, tightning all electrical connections, all nut, bolts, etc completeall as directed. |
| 119 | Supply and fixing in repairs of metal clad industrial plug top 20 Amps, 250 V, 2 pole with earth suitable for geyser/ AC complete all as specified & directed. |
| 120 | Supply and fixing in repairs of metal clad industrial socket 20 Amps, 2 pole with earth suitable for geyser/ AC complete all as specified & directed. |
| 121 | Taking down geyser any capacity by disconnecting hot and cold water connection and refixing the geyser with new fasteners all as specified and directed. |
| 122 | Supply & fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 50 Ltrs as per existing shape and type complete all as specified & directed. |
| 123 | Supply & fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 25 Ltrs as per existing shape and type complete all as specified & directed. |
| 124 | Supply & fixing in replacement geyser assembly brass C P type 9/6/8 hole with gasket as per existing type and size complete suitable for geyser 25/50 Ltr all as specified & directed. |
| 125 | S&F in replacement multifunction safety valve for geyser any capacity. |
| 126 | Supply and fixing in repairsgeyser heating element triangle/ cup type 1.5/2 KW with gasket complete all as specified and directedMake:- AIREX/ THEETA/ BAJAJ/ VENUS/ DELTA/ DASPASS |
| 127 | Supply and fixing in repairsgeyser heating element triangle/ cup type 2.0 KW with gasket complete for make VENUS geyser models all as specified and directed |
| 128 | Supply and fixing in repairs hot & cold PVCflexible water connection 600mm long with brass ends nuts suitable for geyserscomplete all as specified and directed |
| 129 | Supply and fixing in repairs hot & cold PVC flexible water connection, 450mm long with brass ends nuts suitable for geyserscomplete all as specified and directed |
| 130 | S&F in repair CP bib cock 15mm dia all as specified and directed. |
| 131 | S&F in repair CP stop cock 15mm dia with male/ female threads all as specified and directed. |
| 132 | S&F in repair Desert cooler fan blade (aluminium blades) 500 mm sweep dia all as specified and directed. |
| 133 | S&F in replacement of Electronic PCB Board for Split AC indoor unit any cap (inverter type) of any make/ any type all as specified and directed. |
| 134 | S&F in replacement of Electronic PCB Board for Split AC outdoor unit any cap (inverter type) of any make/ any type all as specified and directed. |
| 135 | Supply and fixing in repairs cylindrical type hot water tank of capacity 1000 Ltrs made food grade stainless steel 304,1.6 mm thick, layered with a galvanized steel shell on the outsidedulyinsulated with 50mm thick PUF of 40 kg / cum density min with a standard screw-inport for electrical backup heating element, suitable nipple for inlet, outlet, drain, overflow water connection, or any other item required as per site condition including cladding as per existing designwith supporting legs complete all as specified and directed. |
| 136 | Supply and fixing in repairs cylindrical type hot water tank of capacity 500 Ltrs made food grade stainless steel 304, 1.6 mm thick, layered with a galvanized steel shell on the outsidedulyinsulated with 50mm thick PUF of 40 kg / cum density min with a standard screw-inport for electrical backup heating element, suitable nipple for inlet, outlet, drain, overflow, water connection any other item required as per site connectionincluding cladding as per existing design with supporting legs complete all as specified and directed. |
| 137 | Supply and fixing in repairs cylindrical type hot water tank of capacity 300 Ltrs made food grade stainless steel 304, 1.6 mm thick, layered with a galvanized steel shell on the outsidedulyinsulated with 50mm thick PUF of 40 kg / cum density min with a standard screw-inport for electrical backup heating element, suitable nipple for inlet, outlet, drain, overflow, water connection any other item required as per site connectionincluding cladding as per existing designwith supporting legs complete all as specified and directed. |
| 138 | M&Lfor black hose pipe suitable for hot water upto 80 degree centigrade having bore size 1 inch complete all as specified |
| 139 | M&L for block hose pipe suitable forhot water upto 80 degree centigradehaving bore size 1.5 inch complete all as specified |
| 140 | M&L for stainless steel clamp (worm drive adjustable type) of size suitable for 1.5\"\" outer dia complete all asspecified |
| 141 | M&L for stainless steel clamp (worm drive adjustable type) of size suitable for 2\"\" outer dia complete all asspecified |
| 142 | Material and labour for replacement of metallic outer body with adequate glass wool for geyser of cap 25 ltrsas per existing type duly powder coated paint complete all as specified and directed. |
| 143 | Material and labour for replacement of metallic outer body with adequate glass wool for geyser of cap 50 ltrsas per existing type duly powder coated paint complete all as specified and directed. |
| 144 | M&L rubber gasket suitable for solar water heater connection jointing plateincluding nuts and bolts complete all as specified. |
| 145 | Supply and fixing in repairs hot & cold CP flexible water steel connection, 300mm long with brass ends nuts suitable for geyserscomplete all as specified and directed |
| 146 | M&L for Float valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm dia bore pipe complete. |
| 147 | M&L for Ball valves, high pressure, complete with lever, screwed for iron pipe or brass ferrule and fixed for 15mm dia bore pipe complete. |
| 148 | M&L for freezer assy for refrigerator of cap 200 Ltr to 330 Ltr complete. |
| 149 | Removing of old burnt winding from Desert cooler motor any size, any type (copper/ aluminium), cleaning stator complete for burnt wiring, carbon residue and rewinding of stator by winding of any type/any make fan/ any stator design with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning in presence of JE incharge complete all as directed by Engr-in-Charge |
| 150 | Attending complaints of water seepage/ water leakage from AC within 24 hrs complete by diagnosing the fault, rectifying by any means and cleaning the chocked pipe & tray for removing seepage leakage complete.Notes: The above mentioned items (Sr No 1 to 150) relevant for ACs, water cooler, deep freezers, Refrigerators incl the cost for diagonsing the fault & defect and testing. These items have to be replaced on daily basis on receipt of complaint. The contractor shall deploy a permanentteam to attend these complaints during the currency of contract. Nothing extra shall be admissible on this account. Hence, contactor shall quote his rates accordingly. |
