Public Administrative Department Local Bodies Closing in 0 days TDR #45357863

Tender For Installation Of Solar Light Under The Mal Development Block ,District Of Jalpaiguri, Under The Fund Of 15Th Fc,Year Of 2024-2025.

Issued by Local Bodies · Jalpaiguri, West Bengal
Tender Value
2.69 Lakhs
Estimated cost
Bid Submission
28 Sep 2024
0 days left
EMD
5383
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Installation Of Solar Light Under The Mal Development Block ,District Of Jalpaiguri, Under The Fund Of 15Th Fc,Year Of 2024-2025.

BOQ

Name of Work: Model Estimate for Installation ofSolar Light Under the Mal Development Block ,district of Jalpaiguri, Under the Fund of 15th FC,Year of 2024-2025.(INSTALLATION OF OLAR LIGHT AT UMLAI TG, PASCHIM DAMDIM, DAMDIM TG & BAITHGURI MOUZA UNDER DAMDIM GP. Within DAMDIM GP, ID - 98226957 (24-25))
Sl. No. Item Description
1Supply & Erection of Single Steel tubular pole of 6 mtr long aprox weight 52.25 Kg, IS CHS 80mm OD 4mm thick TATA with sole plate & cap etc. in CC foundation (proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mtr dia and 0.30 mtr above ground level including 3mm thick neat cemented finish and GI earth bolt after making drilling holes etc. on pole & carriage of pole upto 1.6 Km form Store to work site including filling up the excavated earth pit with shifted soil and ramming properly.
2Extra on items 1 above, for providing CC (6:3:1) base block (arround the pole) dimension 0.60x0.60x0.76 mtr above ground level, neatly cemented finish (3mm thick), at the base pole (in liew of CC muffing) including drilling hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box.
3S & F single arm header assembly 300mm long 80mm dia GI pipe welded with 1.5 mtr long 40mm dia GI pipe and MS angle iron frame of 35x35x5 mm for photovoltic panel with necessary nuts and bolts and painting including supply and drawing necessary PVC insulated copper wire as per approved design & drawing of the EIC.
4Earthing with 50mm dia GI pipe 3.64mm thick x 3.04 mtr long and 1x4 SWG GI (Hot Dip) wire (4 mtr long), 13mm dia x 80mm long GI bolts, double nuts, double washers including S & F 15mm dia GI pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtr below the ground level as below by TATA medium quality GI pipe.
5Supply and installation of SPV MODULEIndigenously manufactured PV module should be used. The PV module should have crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II/Bis 14286 from NABL or IECQ accredited Laboratory. The power output of the module(s) under STC should be a minimum of 75Wp at a load voltage of 16.4 A±0.2V. The open circuit voltage of the PV molules under STC should be at least 21.0 Volts. The module efficiency should not be less than 12%. The terminal box on the module should have a provision for opening it for replacing the cable, if required. A distinctive serial number starting with NSM will be engraved on the frame of the module or screen printed on the tedlar sheet of the module
6Supply & Fixing charge controller unit. The total electronic efficiency should be at least 85%. Electronics should operate at 12V and should have trmperature compensation for proper charging of the battery throughout the year. No load current consumption should be less than 40 mA. The PV module itself should be used to sense the ambient light level for switching ON and OFF the lamp. The PCB containing the electronics should be capable of solder free installation and replacement. Necessary lengths of wires/cables, switches suitable for DC use and fuses should be provided
7Supply and fixing o Display board
8Add:- GST @ 18%
9Add:- Cess @ 1%

AI Tender Summary

OUR REF NO 45357863
AUTHORITY Local Bodies
TENDER VALUE 2.69 Lakhs
LAST DATE 28-09-2024
Authority
Authority Name Zilla Parishad
Work Description Installation Of Solar Light Under The Mal Development Block ,District Of Jalpaiguri, Under The Fund Of 15Th Fc,Year Of 2024-2025.
Basic Detail
Tender No eNIT-12/DAMDIM GP/2024-25
Bidding Type Tender
Location
City Jalpaiguri
State West Bengal
Key Dates
Publish Date 21 Sep 2024
Submission Date 28 Sep 2024
Open Date 01 Oct 2024
Finance
Tender Value 2.69 Lakhs
Tender Fee Ref. Documents
EMD 5383
Exemption Available
Document List
ccc34265-f941-45b8-b6f3-54bb0cc1a756.html
BOQ_1670063.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 21, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 28, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 01, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ccc34265-f941-45b8-b6f3-54bb0cc1a756.html

xls

BOQ_1670063.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders