Tender For Constructing New Power Cable Trench
Tender Value
5.86 Lakhs
Estimated cost
Bid Submission
10 Oct 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
punnapra → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing New Power Cable Trench Constructing New Power Cable Trench For Power Evacuation Associated With Nhai Utility Shifting Work.
BOQ
| Sl. No. | Item Description |
| 1 | Picking up 40mm broken stone from the yard and stacking at suitable place including conveyance etc complete as per the direction of officers at site |
| 2 | Collecting 6mm broken stone from the yard and stacking at suitable place including conveyance etc complete as per the direction of officers at site |
| 3 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix |
| 4 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 5 | Demolishing stone rubble masonry (RR work) manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar |
| 6 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 7 | Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of R.C.C. |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas ( not exceeding 1.5m in width as well as 10 sqm on plan) includingdressing of sides and ramming of bottoms , lead up to 50m and lift up to 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed in all kinds of soil. |
| 9 | Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge: Bituminous road |
| 10 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered). |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work forFoundations, footings, bases for columns |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level - Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 16 | 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 ( 1 cement : 4 fine sand) for trenches, kerbs etc if necessary |
| 17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 18 | Providing service of Excavator of suitable size for movement of debris indside the yard and premises to enable stacking of debris at places pointed out to enable works / clearing after works etc complete. |
| 19 | Fabrication of structures for erecting equipments. The GI & MS angles will be supplied departmentally |
| 20 | Transporting by manual labour and stocking at safe place RCC slab of various sizes over cable trenches in line and level including conveyance up to 50m |
| 21 | Transporting by manual labour and placing newly casted RCC slab of various sizes over cable trenches in line and level including conveyance up to 150m |
| 22 | Spreading 40mm metal in the yard, which is stacked at 150m away from the yard to a thickness 15 cm to lines & levels as per direction of Deptl officers at site. |
| 23 | Spreading 6mm metal in the yard, which is stacked at 150m away from the yard to a thickness 10 cm to lines & levels as per direction of Deptl officers at site. |
AI Tender Summary
Tender Timeline
Sep 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender